Hi, I am using VB6 and sometimes when I try to display a report using cristal report 11 , I get this error "Logon Fail", I am working with SQL 2005 ENTERPRISE EDITION.
I want to know if I need an aditional configuration or something like that.
Thank you.
After upgrading a server from SQL 2000 to SQL 2005, I can't get any SQL Agent jobs to run, giving logon failed messages. MSSQLSERVER and SQLSERVERAGENT services are set up to run as the same domain account which has administrative rights to the server and is a SQL login with the sysadmin role. For basic testing purposes, I created a test job that all it does is run a T-SQL command 'SELECT @@VERSION'. The job is also set to run as the same account that the Agent is running under. Below are the logs (with trace messages on) from the point of starting the Agent to my attempt to run the job (user and server names have been changed to protect the innocent):
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [100] Microsoft SQLServerAgent version 9.00.3042.00 (x86 unicode retail build) : Process ID 5168
2007-10-22 15:31:15 - ? [101] SQL Server TESTSERVER version 9.00.3042 (0 connection limit)
2007-10-22 15:31:15 - ? [102] SQL Server ODBC driver version 9.00.3042
2007-10-22 15:31:15 - ? [103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
2007-10-22 15:31:15 - ? [310] 4 processor(s) and 3328 MB RAM detected
2007-10-22 15:31:15 - ? [339] Local computer is TESTSERVER running Windows NT 5.2 (3790) Service Pack 2
2007-10-22 15:31:15 - ? [431] Populating subsystems cache...
2007-10-22 15:31:15 - ? [432] There are 11 subsystems in the subsystems cache
2007-10-22 15:31:15 - ? [124] Subsystem 'TSQL' successfully loaded (maximum concurrency: 80)
2007-10-22 15:31:16 - ? [124] Subsystem 'ActiveScripting' successfully loaded (maximum concurrency: 40)
2007-10-22 15:31:16 - ? [124] Subsystem 'CmdExec' successfully loaded (maximum concurrency: 40)
2007-10-22 15:31:16 - ? [124] Subsystem 'Snapshot' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'LogReader' successfully loaded (maximum concurrency: 100)
2007-10-22 15:31:16 - ? [124] Subsystem 'Distribution' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'Merge' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'QueueReader' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'ANALYSISQUERY' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'ANALYSISCOMMAND' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'SSIS' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [129] SQLSERVERAGENT starting under Windows NT service control
2007-10-22 15:31:16 - + [260] Unable to start mail session (reason: No mail profile defined)
2007-10-22 15:31:16 - ? [174] Job scheduler engine started (maximum worker threads: 400)
2007-10-22 15:31:16 - ? [193] Alert engine started (using Eventlog Events)
2007-10-22 15:31:16 - ? [146] Request servicer engine started
2007-10-22 15:31:16 - + [396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
2007-10-22 15:31:16 - ? [110] Starting SQLServerAgent Monitor using '' as the notification recipient...
2007-10-22 15:31:16 - ? [133] Support engine started
2007-10-22 15:31:16 - ? [167] Populating job cache...
2007-10-22 15:31:16 - ? [297] SQLServer Message: 0, SQLServerAgent Monitor started successfully. [SQLSTATE 01000]
2007-10-22 15:31:16 - ? [168] There are 2 job(s) [0 disabled] in the job cache
2007-10-22 15:31:16 - ? [170] Populating alert cache...
2007-10-22 15:31:16 - ? [171] There are 0 alert(s) in the alert cache
2007-10-22 15:32:59 - ? [177] Job Test1 has been requested to run by User DOMAINmyaccount
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
2007-10-22 15:32:59 - ? [184] Job completion for Test1 is being logged to sysjobhistory
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
I installed sql2005 on server, created odbc connection , sucess connection.
I installed native client on pc. pc ping server sucessfully. I created odbc using sa with valid password (as i do in server), when completing give error " sql server does not exist or access denied" , and can not connect with server.
how can i resolve the problem.
I have come across this error message in ssrs and cannot seem to locate the error. Report manager lets me logon-- I can navigate to the folder but once I click on the actual report I get this error
and suggestions as to why and how to fix it???
Thanks in advance
I'm trying to see how else we might be able to leverage any investments in Report Models other than enabling Report Builder of which I expect to get little usage. I do see the benefit of building the model for our richer Visual Studio developed reports, but is it possible to use a Report Model as a data connection from Excel?
Thanks,
-p
I have a report.
In one of the text field i have to show the rowcount of the dataset
How can i do that
im creating a database for a product catalog. im using xp pro. im trying toc create a new database. heres my problem.
1. theres a red x next to the cylinder of the server (in visual studio.net ) is this a problem? how do i fix it?
2. when i try to connect to the sql server i get this error [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
3. what code do you i use to add a user and in what file, so i can connect to the server and create this database, once I can do that, I can develop the rest of this e-commerce site. Thanks so much!!
The following (VB.Net) code causes exceptions at seemingly random times.
Any suggestions?
Not sure if the problem is in .Net's ODBC support or in Sql Native Client.
If MARS is off, usually after less than 100 loops:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [HY000] [Microsoft][SQL Native Client]Connection is busy with results for another command"
Source="SQLNCLI.DLL"
Turning MARS is on bypasses that error, so it will sometimes survive a thousand or so runs before hitting:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [23000] [Microsoft][SQL Native Client][SQL Server]Cannot insert the value NULL into column 'Number', table 'tempdb.dbo.#TempTable___..(shortened to fit).. _________000000002F3F'; column does not allow nulls. INSERT fails.
Source="SQLNCLI.DLL"
Code here:
(Console Application, empty database,
Visual Studio 2005, .Net 2.0, Windows XP,SQL Server 2005 or SQL Express 2005, Local or Remote)
Code Snippet
Module Module1
Sub Main()
'Dim connection As New SqlClient.SqlConnection("database=TestDB;server=.sqlexpress;Integrated Security=SSPI;") 'Doesn't crash
'Dim connection As New OleDb.OleDbConnection("Provider=SQLNCLI;database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Doesn't crash
'Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Crashes
Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;MARS_Connection=yes") 'Crashes
VBMath.Randomize()
Dim run_count As Integer = 1
connection.Open()
Console.WriteLine("Connected!!")
While True
'connection.Open()
Dim testcmd As New Odbc.OdbcCommand("CREATE TABLE [#TempTable] (Number int PRIMARY KEY)", connection)
testcmd.ExecuteNonQuery()
testcmd.Dispose()
testcmd = Nothing
Dim dtTemp As New DataTable
Dim daTemp As New Odbc.OdbcDataAdapter("SELECT * FROM [#TempTable]", connection)
daTemp.MissingSchemaAction = MissingSchemaAction.AddWithKey
daTemp.Fill(dtTemp)
Dim cbTemp As New Odbc.OdbcCommandBuilder(daTemp)
Dim viewTemp As New DataView(dtTemp, Nothing, "Number", DataViewRowState.CurrentRows)
Dim i As Integer
For i = 1 To 1000
Dim test_number As Integer = CInt(Rnd() * 2000)
If viewTemp.Find(test_number) = -1 Then 'Keep it unique
Dim new_temp_row As DataRowView = viewTemp.AddNew()
new_temp_row("Number") = test_number
new_temp_row.EndEdit()
End If
Next
daTemp.Update(dtTemp)
'daTemp.Dispose()
'daTemp = Nothing
'cbTemp.Dispose()
'cbTemp = Nothing
'dtTemp.Dispose()
'dtTemp = Nothing
'viewTemp.Dispose()
'viewTemp = Nothing
Dim testcmd2 As New Odbc.OdbcCommand("DROP TABLE [#TempTable]", connection)
testcmd2.ExecuteNonQuery()
testcmd2.Dispose()
testcmd2 = Nothing
'connection.Close()
'GC.Collect()
'Console.Write(".")
run_count += 1
End While
End Sub
End Module
Usually the ".Update" triggers the exception, but sometimes the other sql commands do it.
Have tried various experiments with disposing of objects immediately when finished, but no effect.
Opening and closing the connection each loop seems to delay the errors, but it still happens eventually.
RDA - vb 2005 app - desktop & pocket pc emulator - error: 80072F76 native error: 28035
PDA info:
.NET CF 1.0 env-string...
MS SQL client
MS SQLCE 2.0 dev
MS SQLCE 2.0
DESKTOP info:
Microsoft SQL Server Management Studio Express 9.00.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00
(xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 6.0
Microsoft Internet Explorer 6.0.2900.2180
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
copied an app from http://www.codeproject.com/netcf/PocketPCwithSQLCE/PocketPCwithSQLCE_Src.zip
modified its CONFIG.XML to...
<?xml version="1.0" encoding="utf-8" ?>
<Configuration>
<DatabaseServer>192.168.1.89</DatabaseServer>
<DatabaseName>D1Temp</DatabaseName>
<DatabaseLogin>sa</DatabaseLogin>
<DatabasePassword></DatabasePassword>
<SQLCEURL>http://192.168.1.89/SqlMobile/sqlcesa30.dll</SQLCEURL>
<LocalDBConnect>Provider=Microsoft.SQLServer.OLEDB.CE.2.0; Data Source=My DocumentsMyFav.sdf;</LocalDBConnect>
<LocalDBLocation>My Documents</LocalDBLocation>
<LocalDBName>MyFav.sdf</LocalDBName>
<IISLogin>192.168.1.89/Jason</IISLogin>
<IISPassword>batman2005</IISPassword>
</Configuration>
error is "Header information is either corrupted or missing. [,,, header name,,]"
have spent weeks google-ing trying to get this to work, to no avail.
Has ANYONE got RDA PULL to work with above setups?
When try to run report, I receive this message:€œLogon failed.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
We just have Reporting Services server (2005) up and running, my roles are browser, Content Manager, My Reports, Publisher, Report Builder. I was able to deployed the report and set up data source. Connect using credentials supplied by suer running the report, and use as Windows credentails when connecting to the data source checked.
Did a search on but can't find any messages that related to this problem.
Please advise.
Hi All,
I am getting the following error in the ERRORLOG File when I am
trying to connect to SQL Server 2005 Enterprise Edition 64bit with SP2 from
Reporting Services Configuration tool - Database Setup. The SQL Server
database and reporting services are on 2 different servers. Both are running
2003 SP2 64 bit.
2007-04-12 07:30:05.54 Logon Error: 18456, Severity: 14, State:
8.
2007-04-12 07:30:05.54 Logon Login failed for user 'sa'.
[CLIENT: xx.xx.xx.xx]
I know my password is valid as I can logged into SSMS using SA. I can create
the 2 reportserver databases using the Reporting Services Configuration tool
on the database server. The db server is in MIXED mode.
What am I missing?
Related articles I have followed are:
Login failed for user 'x'
http://msdn2.microsoft.com/en-us/library/ms366351.aspx
Change Server Authentication Mode
http://msdn2.microsoft.com/en-us/library/ms188670.aspx
Any help to get passed this problem would greatly be appreciated.
Thanks in advance for your time!
Hi All,
I am getting the following error in the ERRORLOG File when I am
trying to connect to SQL Server 2005 Enterprise Edition 64bit with SP2 from
Reporting Services Configuration tool - Database Setup. The SQL Server
database and reporting services are on 2 different servers. Both are running
2003 SP2 64 bit.
2007-04-12 07:30:05.54 Logon Error: 18456, Severity: 14, State:
8.
2007-04-12 07:30:05.54 Logon Login failed for user 'sa'.
[CLIENT: xx.xx.xx.xx]
I know my password is valid as I can logged into SSMS using SA. I can create
the 2 reportserver databases using the Reporting Services Configuration tool
on the database server. The db server is in MIXED mode.
What am I missing?
Related articles I have followed are:
Login failed for user 'x'
http://msdn2.microsoft.com/en-us/library/ms366351.aspx
Change Server Authentication Mode
http://msdn2.microsoft.com/en-us/library/ms188670.aspx
Any help to get passed this problem would greatly be appreciated.
Thanks in advance for your time!
well this is a strange one.
i have a sql 2005 server express running on a pc. it has an xp embedded database on it.
i can connect to it from one pc using component database manager.
however, if i try this from another pc it fails with the following code
2006-09-13 15:24:18.07 Logon Error: 18456, Severity: 14, State: 16.
2006-09-13 15:24:18.07 Logon Login failed for user 'HOSTNAMEGuest'. [CLIENT: XX.XX.XX.XX]
.
i have simple file sharing turned of on the remote pc that fails to connect.
what is my problem.
The local sql server that was working fine earlier does not start now. I have already created tables and accessed them using stored procedures.
I get an error 1069: The service did not start due to logon problems. I have only changed my domain password. I do not remember what authentication I chose for log on.
Any suggestions would be helpful.
Thanks
Hi all,
Ms SQL Server Native Error 18456 !! Login Failed.
Pls help me out.
Thanx in Advance
I'm new in this forum and I 'm Italian, so my English won't be perfect!
If i want to connect to my SQL Server database in prompt i type:
"osql -U sa" and then i type the password.
So, I get an error that says:
"[Sql Native Client] Provider Via: Impossible to find the specified module.
[Sql Native Client] Access timeout expired
[Sql Native Client] An error occured during the attempt to estabilish a connection to the server. During the connection to SQL Server this error may be caused by pre-defined settings that don't ......"
How i can solve this problem?
Who can help me?
Thank you!!
Maxx
I'm new in this forum and I 'm Italian, so my English won't be perfect!
If i want to connect to my SQL Server database in prompt i type:
"osql -U sa" and then i type the password.
So, I get an error that says:
"[Sql Native Client] Provider Via: Impossible to find the specified module.
[Sql Native Client] Access timeout expired
[Sql Native Client] An error occured during the attempt to estabilish a connection to the server. During the connection to SQL Server this error may be caused by pre-defined settings that don't ......"
How i can solve this problem?
Who can help me?
Thank you!!
Maxx
Hi, I have a service using SQL 2005 Express database, the service is started automatically on system startup, most of the times it can logon to the database successfully, however, sometimes, I got the following error:
"Error: 18456, Severity: 14, State: 16"
Any suggestions?
Thanks in advance!
Yuxi
2006-11-22 11:09:49.90 Server Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2006-11-22 11:09:49.92 Server (c) 2005 Microsoft Corporation.
2006-11-22 11:09:49.92 Server All rights reserved.
2006-11-22 11:09:49.93 Server Server process ID is 1956.
2006-11-22 11:09:49.93 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2006-11-22 11:09:49.93 Server This instance of SQL Server last reported using a process ID of 1952 at 11/22/2006 11:08:07 AM (local) 11/22/2006 7:08:07 PM (UTC). This is an informational message only; no user action is required.
2006-11-22 11:09:49.95 Server Registry startup parameters:
2006-11-22 11:09:49.95 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2006-11-22 11:09:49.95 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2006-11-22 11:09:49.95 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2006-11-22 11:09:49.98 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-11-22 11:09:50.00 Server Detected 4 CPUs. This is an informational message; no user action is required.
2006-11-22 11:09:50.95 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-11-22 11:09:50.96 Server Database mirroring has been enabled on this instance of SQL Server.
2006-11-22 11:09:50.96 spid4s Starting up database 'master'.
2006-11-22 11:09:51.06 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2006-11-22 11:09:51.18 spid4s SQL Trace ID 1 was started by login "sa".
2006-11-22 11:09:51.23 spid4s Starting up database 'mssqlsystemresource'.
2006-11-22 11:09:51.25 spid4s The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2006-11-22 11:09:51.59 spid8s Starting up database 'model'.
2006-11-22 11:09:51.60 spid4s Server name is 'TestMachineTestSQLServer'. This is an informational message only. No user action is required.
2006-11-22 11:09:51.60 spid4s Starting up database 'msdb'.
2006-11-22 11:09:51.93 Server A self-generated certificate was successfully loaded for encryption.
2006-11-22 11:09:51.93 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalTestSQLServer ].
2006-11-22 11:09:51.93 Server Server local connection provider is ready to accept connection on [ \.pipeMSSQL$TestSQLServersqlquery ].
2006-11-22 11:09:51.93 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2006-11-22 11:09:51.95 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2006-11-22 11:09:52.12 spid8s Clearing tempdb database.
2006-11-22 11:09:53.12 spid8s Starting up database 'tempdb'.
2006-11-22 11:09:53.21 Logon Error: 18456, Severity: 14, State: 16.
2006-11-22 11:09:53.21 Logon Login failed for user 'sa'. [CLIENT: <local machine>]
2006-11-22 11:09:53.70 spid4s Recovery is complete. This is an informational message only. No user action is required.
2006-11-22 11:09:53.70 spid11s The Service Broker protocol transport is disabled or not configured.
2006-11-22 11:09:53.70 spid11s The Database Mirroring protocol transport is disabled or not configured.
2006-11-22 11:09:54.09 spid11s Service Broker manager has started.
2006-11-22 11:10:19.26 spid51 Starting up database 'TestDatabase'.
2006-11-22 11:10:19.42 spid51 Recovery is writing a checkpoint in database 'TestDatabase' (5). This is an informational message only. No user action is required.
2006-11-22 11:18:08.92 spid51 Starting up database 'TestDatabase'.
Hi all:
We currently have a production server (prodserver) and backup server (backupserver) in the same domain, and I am attempting to backup dbs from the production box on to the backup box using the following:
backup database db to disk = '\backupservere$ackupdb.bak' with init
when executing from SSMS, I receive the following error:
Msg 3201, Level 16, State 1, Line 1
Cannot open backup device '\backupservere$ackupdb.bak' Operating system error 1326 (Logon failure: unknown user name or bad password)
Here's where the issue lies for me:
Both the production and backup box are running services under the same domain accounts, let's call it "domainsqlagent"
domainsqlagent has domain admin rights on backupserver and prodserver
I can login to both the production and backup servers using the domain account, map drives, hit administrative shares, drag and drop files, etc between the servers
If I use xp_cmdshell to try and simply move a file between prodserver and backupserver, I receive the above error as well. However, if I open an cmd window and execute the move command from DOS, it will successfully move.
There is a development server on the domain as well (devserver) using domainsqlagent to run the service accounts, and I can successfully backup databases from dev to prod, dev to backup, backup to dev, backup to prod, prod to dev, but NOT prod to backup
Finally, if I create a maintenance plan in SSMS, I cannot create a connection to the backup server (error reads the connection may not be configured correctly or you may not have the right permissions on this connection)
The backup server was changed to a different domain (domain2) before I arrived here, but has been switched back now, rebooted, service accounts changed via Configuration Manager, services restarted (and rebooted again for good measure).
Does SSMS use a different security context to create the connections to remote servers? From all my tests, the domainsqlagent account has all the correct rights and is working OK. Could this be a network issue? The network admin and I have been banging our heads against a wall for the past couple of days, so if anyone has seen something like this, I'd appreciate any help.
Thanks,
Craig
I am facing a problem which is based on the restrictions on the domain of the customer. After deplyoing the report on the server we are getting the following error message in the report manager after executing (clicking) a report link:
Logon failed.
Logon failure: the user has not been granted the requested logon type at this computer. (Exception from HRESULT: 0x80070569)
I googled for that and it seems to be an authentication issue where some user / account is not granted to log on as service / locally, but the problems is better described than the solutions. Did anyone faced that problem so far ? Which account has to be granted what priviledges or permissions in Windows. We are using a SQL Server 2005 / Reporting Services 2005 running on the same machine whereas the virtual directories Reports and Reportserver are running in a separate Application Pool
Thanks,
Thomas
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [XML Source [55]]: There was an error setting up the mapping. The root element of a W3C XML Schema should be <schema> and its namespace should be 'http://www.w3.org/2001/XMLSchema'.
------------------------------
ADDITIONAL INFORMATION:
Pipeline component has returned HRESULT error code 0xC02090CF from a method call. (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
The error pasted above arose when I attempted to create a XML source based on a Crystal Reports XI report exported as XML. Is there any special modification to make to the XML exported from Crystal to allow SSIS to read it properly?
Thanks for your help,
Sid
hi there,
I have a crystal report that calls a stored procedure from SQL Server 2000. The only parameter I have is @A
the SP is:
--------------
CREATE PROCEDURE Final
@A INT
AS
Declare @SQL VARCHAR(2000)
SET @SQL = 'SELECT * FROM Schools where Areano = @A'
EXEC(@SQL)
GO
-------------
From the standard report creation wizard, i choose the data (SP). and select the SP, then i got window to enter a parameter values for @A, and i check ( Set to Null value), then press OK, the following error occured
Must Declare the variable @A
Please help me!
Best Regards
I'm trying to execute a SSIS package via proxy user but I keep getting the following error message regardless of I have tried to do to fix it, I have done the following so far:-
1. Recreated the proxy user
2. Retyped the password, under credentials
Message : Unable to start execution of step 1 (reason: Error authenticating proxy "proxyname", system error: Logon failure: unknown user name or bad password.). The step failed.
i have recently ported an old asp.net web application using crystal reports 9 from windows server 2003 to windows server 2008 . the crystal reports smoothly at first but one of the reports stopped working when the admin changed his password now the report is showing error. Failed to open a rowset
View 3 Replies View RelatedAm using sql 2000 to store data in the greek language. Using delphi built program to enter the data. The delphi program communicates with sql server via the ODBC connection I created. When I type in above 150 characters in a varchar column that can hold 600, the message (odbc manager - function sequence error) appears and does not allow me to save. However if I type in the english language, it saves without a problem. Here's the strange one-- if I type very very slowly in the greeek language it will save! Am using Windows XP english version.
Any ideas? I have spent above a month on this one!!
I am starting to see this error appear randomly? This is on an application that uses ASP, but its been working fine for months... I'm using SQLExpress 2005 on Win2003 IIS6Microsoft SQL Native Client error '80040e21'
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.I'm trying to figure out why its happening all of a sudden? Any ideas very appreciated...
As long as the output file is written to the local client, it completes successfully. But after changing the UNC path to another server with or without fully qualified names it is unable to open BCP host data-file. (sample shown below)
-----------------------------------------------------------------
DECLARE @FileNamevarchar(2000),
@bcpCommandvarchar(2000)
SET @FileName =REPLACE('\stladminy_drive ransfer
maffrandauthors_'+CONVERT(char(8),GETDATE(),1)+'.txt','/','-')
SET @bcpCommand ='bcp "SELECT * FROM FKIAcctReceivable.dbo.PurchaseOrder" queryout "'
SET @bcpCommand =@bcpCommand + @FileName + '" -T -c'
EXEC master..xp_cmdshell @bcpCommand
---------------------------------------------------
xp_cmdshell has been enabled and the user has sysadmin rights.
Anybody have the same problem and willing to help?
Hi,
Could use a lil' help on a query that works on one server, but not the other.
Thx in advance !!!!!
Marcus
===========================
Builds:
Svr1:
Windows 2003 R2 SP2 Enterprise
IIS 6.0
SQL 2005 Enterprise SP2
WSUS 3.0 SP1
SCCM 2007 RTM
Svr2:
Windows 2003 R2 SP2 Standard
IIS 6.0
SQL 2005 Standard SP2
WSUS 3.0 SP1
SCCM 2007 RTM
Svr2 query works fine, Srv1 query returns this error:
An error occurred when the report was run. The details are as follows:
The query has been canceled because the estimated cost of this query (2147483647) exceeds the configured threshold of 100000. Contact the system administrator.
Error Number:
-2147217900
Source:
Microsoft OLE DB Provider for SQL Server
Native Error:
8649
This is the query language:
SELECT DISTINCT
dbo.v_R_System.Netbios_Name0 AS [Machine Name],
dbo.v_R_System.Resource_Domain_OR_Workgr0,
dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System Caption],
dbo.v_R_System.Operating_System_Name_and0 AS [Operating System],
dbo.v_GS_OPERATING_SYSTEM.Version0 AS [Operating System Version],
dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [Service Pack Version],
dbo.v_GS_COMPUTER_SYSTEM.Manufacturer0 AS [System Manufacturer],
dbo.v_GS_COMPUTER_SYSTEM.Model0 AS [System Model],
dbo.v_GS_PC_BIOS.SerialNumber0 AS [System Serial Number (if Available)],
dbo.v_GS_PROCESSOR.MaxClockSpeed0 AS [Processor Speed (GHz)],
dbo.v_GS_COMPUTER_SYSTEM.NumberOfProcessors0 AS [Number of Processors (or Cores)],
dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0 AS [Memory (KBytes)],
dbo.v_GS_LOGICAL_DISK.Size0 AS [Disk Space (MB)],
dbo.v_GS_LOGICAL_DISK.FreeSpace0 AS [Free Disk Space (MB)],
dbo.v_RA_System_IPAddresses.IP_Addresses0 AS [IP Address],
dbo.v_RA_System_MACAddresses.MAC_Addresses0 AS [MAC Address],
dbo.v_GS_PC_BIOS.Description0 AS [BIOS Description],
dbo.v_GS_PC_BIOS.ReleaseDate0 AS [BIOS Release Date],
dbo.v_GS_PC_BIOS.SMBIOSBIOSVersion0 AS [SM BIOS Version],
dbo.v_GS_OPERATING_SYSTEM.WindowsDirectory0 AS [Windows Install Directory]
FROM dbo.v_R_System
INNER JOIN dbo.v_GS_OPERATING_SYSTEM ON dbo.v_GS_OPERATING_SYSTEM.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_GS_SYSTEM_ENCLOSURE ON dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_GS_COMPUTER_SYSTEM ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_RA_System_IPAddresses ON dbo.v_RA_System_IPAddresses.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_RA_System_MACAddresses ON dbo.v_RA_System_MACAddresses.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_GS_X86_PC_MEMORY ON dbo.v_GS_X86_PC_MEMORY.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_GS_PROCESSOR ON dbo.v_GS_PROCESSOR.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_GS_PC_BIOS ON dbo.v_GS_PC_BIOS.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_GS_LOGICAL_DISK ON dbo.v_GS_LOGICAL_DISK.ResourceID = dbo.v_R_System.ResourceID
INNER JOIN dbo.v_FullCollectionMembership ON (dbo.v_FullCollectionMembership.ResourceID = v_R_System.ResourceID)
WHERE (dbo.v_GS_LOGICAL_DISK.DeviceID0 = 'C:')
AND dbo.v_FullCollectionMembership.CollectionID = 'in00000f'
Order by dbo.v_R_System.Netbios_Name0
The below error happens when trying to use the SSIS Transfer SQL Server Objects Task to transfer objects. Related to (Bug?? Transfer SQL Server Objects Task - error when copying Views )?
--------------------
Error: 0xC002F325 at Transfer Data (NEW) Pre, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: Transfer Data (NEW) Pre
Hello All,
I am trying to create a local database.............using a simple tool called BuildDatabase.cmd for example this is what i pass in the command prompt
C:My.databaseBuildDatabase SAMPLE1SQLEXPRESS MyTestDatabase
this is the error i am getting........
[SQL Native Client]SQL Network Interfaces: Error Locating Server/InstanceSpecified [xFFFFFFFF].[SQL Native Client]Login timeout expired[SQL Native Client]An error has occurred while establishing a connection tothe server. When connecting to SQL Server 2005, this failure may be caused bythe fact that under the default settings SQL Server does not allow remoteconnections.
WARNING! Drop/Create Errors
can someone please help me out....how to fix this.
Thanks a lot
I'm currently trying to using this bcp script to export results to a csv.
USE crm001_spark
GO
EXEC xp_cmdshell 'bcp "SELECT top 10 * FROM [datebasename].dbo.table name]" queryout "C:Customers.csv" -c -b 10000 -t , -T -S [server]datebasename'
and the ERROR that is coming out is
SQLState = 08001, NativeError = -1
NULL
Error = [Microsoft][SQL Native Client]Login timeout expired
Error = [Microsoft][SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
SQLState = 08001, NativeError = -1
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
SQLState = S1T00, NativeError = 0
I have checked the server config manager TCP port and it is pointing to the correct port 1433. What else could be causing the error ?
I am getting the above error if i try to access sqlce3.0 database from an application which already uses sqlce2.0,
this error happens while initializing the sqlcecommand object
I hope the reason might be executing the the sqlcecommand through a sqlce2.0 engine on a sqlce3.0 database,
But I tried installing the sqlce3.0 in the PDA , still I am getting the same error
I would be thankfull if anyone could solve this
Thanks
Varadan
Guys,
We just got an Error 644 on our DB, the error was:
Could not find the index entry for RID '169bc61301c3950000209e1a0002000000030000' in index page (1:1683508), index ID 0, database 'TR'..
Error: 644, Severity: 21, State: 3
We run dbcc CheckDB on the TR DB with no error:
CHECKDB found 0 allocation errors and 0 consistency errors in database 'TR'.
I read JohnSharp post, and tried the script from Paul:
DBCC CHECKTABLE (sysindexes) WITH NO_INFOMSGS, ALL_ERRORMSGS
it return no erros as well, anyone got any more info on whats this error is?
At the time of this happen, its seems that a process is running, which run some stored proc which will create some temp tables, will that message be relating to some index that created on the tempdb (from the temp tables) rather then the index on the TR DB? Since we can't even tell which table its affected, is there any way to find out?
Thanks.