Error Message -- Is Db Going Corrupt?
Aug 6, 1999
Although backups and integrity checks show that there is nothing wrong with one of my databases, when I did a "dbcc checkalloc" to one of my databases, amidst all of the information (it was successful as well) was the following message:
Msg 2540, Level 16, State 1
Allocation Discrepancy: Page is allocated but not linked; check the following pages and ids: allocation pg#=40960 extent id=41208 logical pg#=41208 object id on extent=8 (object name = syslogs) indid on extent=0
How do I fix this?
Thanks
View 4 Replies
ADVERTISEMENT
Oct 1, 2007
I am receiving the following error message at bootup: "Your SQL Server installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL)."
My Operating System is: Windows XP Media Center Edition Service Pack 2 (build 2600)
I have tried reloading XP and Windows to no avail.
HELP!
View 4 Replies
View Related
Aug 7, 2000
Hi Everybody,Can any one tell me how to solve the error 8908(Table Corrupt error). Iam getting this problem every 6 weeks or so. Chain linkage mismatch problem.Help in this regard is highly appreciated.Thanks in advance.
Monu.
View 1 Replies
View Related
Sep 10, 1999
I am getting an error every so often on my databases,
I get the following error,
DEscriptor for system table 8 in database not found in hash table,
the databses are unusalble until I stop SQL & shut down
I checked the books on line and it says to stop SQL and shut down,
I have done this and it solves the problem temporaily,
Is there any way that I can permanently fix this,
If anyobne has any ideas I'd appreciate it,
Thanks,
Fin
View 1 Replies
View Related
Jul 16, 1999
I have SQL Server 6.5 I was running DBCC CHECKALLOC (db_name) and I got corrupt table error 2502. Please can anyone help me out as to what I do to repair that corrupt table? I wait for your help. I shall remain.
Regards,
E. Warden
View 2 Replies
View Related
Jun 1, 2001
I have the following error on a table. I have rebuilt the index with the sorted_DATA_reorg option but no sucess any ideas!!?
Table Corrupt: Keys in data page should be in ascending order; check page number 13843
Server: Msg 2511, Level 16, State 1, Line 1
View 1 Replies
View Related
Jul 4, 2001
Since a user increased the size of a 5.5Gb database by 500Mb, the following error is being reported when they attempt to use the Recalculate button:
Error 2541:[SQL Server]Table Corrupt: object id does not match between extent in allocation pages and Sysindexes; check the following extent alloc pg#=195072 extent#=195320 object id on extent=0 (object name = 0)object id in Sysindexes=471787584 (object name = C0122402RT0)
Other than this the database is behaving normally so far. How do I solve this problem?
thanks
Derek
View 2 Replies
View Related
Jun 9, 2006
Robert writes "Is it possible to recover any data from a database that is throwing the following error in query analyzer?
select * from table1
server: msg 823, level 24, atate 2, line 1
I/O error (bad page ID) detected during read at offset 0x00000007b7e000 in file '... dbname.mdf'
I can select top n from some tables with no error, if n is too large, I get the same error. Other tables give this error even for top 1.
After setting the db in single_user mode, I tried dbcc checkdb with repair_allow_data_loss option and received the following:
msg 8966, level 16, state 1, line 1
could not read and latch page ( 1:15807 ) with latch type SH. sysindexes failed.
I tried dbcc checktable on sysindexes with repair_allow_data_loss option and received the following:
msg 8966, level 16, state 1, line 1
could not read and latch page ( 1:15807 ) with latch type SH. sysindexes failed.
msg 8966, level 16, state 1, line 1
table error: object id 0, indexid 0, page ID (1:15807) the pageid in the page header = (0:0)
The error has been repaired.
I get the same message each time I run the DBCC command.
I can select * from sysindexes with no problem.
If I select * from sysindexkeys, I get the following:
msg 601, level 12, state 3, line 1
could not continue scan with nolock due to data movement.
I'm wondering if sysindexkeys is corrupt and causing this problem?...
I have also tried to bcp data out of the database with no success.
Any help or advice would be greatly appreciated.
Thanks in advance.
Robert"
View 5 Replies
View Related
Dec 1, 1999
I have a table which I am unable to drop, remove indexes from, and when I select the database from the EM and click on Recalculate get the following error:
When attempting to do a Recalculate from the EM I get: Error 2541 (SQL Server) Table Corrupt object id does not match between extent in allocation page a d sysindexes; check the following extent; alloc pg# 589050 extent# 589096 object id on extent=0 object name=0 object id in sysindexes=1420532094 (object name=MifDEtailOct)
When attempting to remove an index from the table I get: Error 2504 (SQL Server) Table Corrupt index id in alloc page does not match the index id in sysindexes (alloc page#=721664; extentid=721704; index id in alloc=5;index id in sysindexes = 4
When attempting to drop the table from the EM it disappears then when I do a refresh it's back again.
I run a checkdb on the database once a week, but that hasn't resolved the problem.
I also ran the sp_fixindex as outlined in the faq with no relief.
This initially happened on one table and now I'm getting the same error on a second table. I have removed the data from both tables, but can't seem to get rid of them.
These tables originally has a couple of million records in them so they were rather large before I moved the data to a new table.
Truncate also didn't work when I was attempting to clear the table. I had to create an sp to delete a few hundred thousand records at a time.
I would appreciate any suggestions.
Rick Poland
rpolan1@tandy.com
View 1 Replies
View Related
Feb 9, 1999
Has anyone ever seen fatal error 1109, I cannot find any info on it. Also, our msdb was either corrupted at a clients site or someone deleted it and tried to recreate it to cover themselves....any how...all of the stored procedures are missing from it and it will not let us back up data or schedule tasks...do I need to re-install SQL Server 6.5 to fix this?
Thank you.
View 1 Replies
View Related
Oct 19, 2001
Since a user increased the size of a 5.5Gb database by 500Mb, the following error is being reported when they attempt to use the Recalculate button (I think they mave for some reason have recreated a table that they thought was missing, but I haven't been given the full details yet!):
Error 2541:[SQL Server]Table Corrupt: object id does not match between extent in allocation pages and Sysindexes; check the following extent alloc pg#=195072 extent#=195320 object id on extent=0 (object name = 0)object id in Sysindexes=471787584 (object name = C0122402RT0)
Other than this the database is behaving normally so far. How do I solve this problem (i'm hoping to get this sorted soon if anyone can help)?
thanks
Derek
View 2 Replies
View Related
Apr 15, 2006
As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA
View 23 Replies
View Related
Oct 13, 2007
I hope someone can help me here. Here is some background.
As I was attempting to download SQL Express, the download dialog box timed out. When I x-ed out of the download, Windows XP Professional 2002 threw up an error message indicating that the dialog box was non-responsive, and I elected to close it.
I downloaded SQL again successfully, and installed with no errors. I then attempted to create a new db through Visual Web Developer. Instead of creating a database, Visual Studio returned an error saying that I did not allow for new database objects, and that I should change my permission settings. I could not figure out how to do this, so I uninstalled SQL Express.
After re-starting, I got the following message: €œYour SQL Server Installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this option.€?
I uninstalled MS SQL again from the Add/Delete Programs on my Control Panel. On re-start, I received the same error again. On my Programs list, MS SQL is not present, there are several MS SQL files in the path C:Program FilesMicrosoft SQL Server.
So I located the Visual Studio uninstall tool and attempted to run it. I received the same error: €œYour SQL Server Installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this option.€?
Any ideas on how to uninstall the files in my program files so I can load a clean copy of SQL?
View 3 Replies
View Related
Apr 9, 2007
I was successfully able to installing sql server 2005 developer edition all peices except the "Workstation Component, Book Online, Development Tool", the last item in the installation list. It gave errror for bad sql.cab file. Although this developer edition came directly of the box this error came up in many attempts. Upon "Ignore" it gives error 2350.
I am able to run sql server's all the services and able to access it via VS.Net server browser. I can create and change tables etc. but there is no "Management Studio" installed. There is no icon for it either on the desktop or in the Start->SQL Server 2005 menu.
Is it possible to get and copy sql.cab file or entire client component from somewhere else? --Freed download or something? I searched for sql.cab file but it was not in the CD. It could be inside some other file or cmpressed.
Any suggestion.
View 2 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
May 22, 2007
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies
View Related
Nov 20, 2006
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
View 5 Replies
View Related
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
Oct 18, 2007
Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
View 4 Replies
View Related
Oct 10, 2007
where can i find it?
thanks
View 4 Replies
View Related
Apr 2, 2008
I hope someone has seen this one...I've got a very simple web method that returns a DataTable from my database. It worked fine until I changed this line of code:
string SqlString = @"SELECT Timestamp, Confession FROM Confessions WHERE ConfessionID = ? ORDER BY Timestamp desc";
To this line of code:
string SqlString = @"SELECT Timestamp, Confession FROM Confessions WHERE ConfessionID = ? AND CategoryID = ? ORDER BY Timestamp desc";
Here is the complete webmethod:
[WebMethod]
public DataTable GetConfession (int ConfessionID, int CategoryID) {
DataTable dt = new DataTable();
dt.TableName = "XMLConfession";
string SqlString = @"SELECT Timestamp, Confession FROM Confessions WHERE ConfessionID = ? AND CategoryID = ? ORDER BY Timestamp desc";
using (OleDbConnection cn = new OleDbConnection (ConnectionString)) {
using (OleDbCommand cmd = new OleDbCommand (SqlString, cn)) {
cmd.CommandType = CommandType.Text;
cmd.Parameters.AddWithValue ("@ConfessionID", ConfessionID);
cmd.Parameters.AddWithValue ("@CategoryID", CategoryID);
cn.Open();
OleDbDataAdapter da = new OleDbDataAdapter (cmd);
da.Fill (dt);
}
}
return dt;
}
To cause the error, all I did was add the AND statement into the query. Now I get this .NET error message every time I try to run this program:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at System.Data.Common.UnsafeNativeMethods.ICommandWithParameters.SetParameterInfo(IntPtr cParams, IntPtr[] rgParamOrdinals, tagDBPARAMBINDINFO[] rgParamBindInfo) at System.Data.OleDb.OleDbCommand.ApplyParameterBindings(ICommandWithParameters commandWithParameters, tagDBPARAMBINDINFO[] bindInfo) at System.Data.OleDb.OleDbCommand.CreateAccessor() at System.Data.OleDb.OleDbCommand.InitializeCommand(CommandBehavior behavior, Boolean throwifnotsupported) at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
I am using SQL Server Compact Edition 3.5 and C# .NET 2.0. It's worth noting that the web service does this outside of the program as well, so I don't think the problem is in the code that calls it. Also worth noting is that the query itself works fine when I substitute values in and run it in .NET Server Explorer.
Thanks in advance for any assistance.
View 5 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
Oct 19, 2007
I have a SQL Express database on our server that is used for one of our websites when the website tries to write to the database I get the following error: -
An attempt to attach an auto-named database for file D:lahwebsitesGiants North Walesapp_datadatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This error is very frustrating and I really can't find a way around it. I have done the following: -
Deleted the SQL Server Express folders under user preferences
View 3 Replies
View Related
Feb 29, 2008
Hi,I am trying to write some C# ASP.NET 2.0 code. I have created a web form to send data to my sql server 2005 database. When I compile the application and insert data then click on the submit button I get this error
"A first chance exception of type
'System.Data.SqlClient.SqlException' occurred in System.Data.dll" I have been trying to solve this for a few days now with no luck, so any help would be appreciated. I'll post below the source code of the web form (addOrder.aspx). It might be worth mentioning that I have created another web form in the same project called addCustomer.aspx. Like addOrder.aspx it is a web form, however it successfully inserts data in the database. 1 <%@ Page Language="C#" MasterPageFile="~/Default.master" Title="Add Order Page" %>
2 <%@ import namespace="System.Data.SqlClient" %>
3 <%@ Import Namespace="System.Data" %>
4 <%@ Import Namespace="System.Web" %>
5 <%@ Import Namespace="System.Configuration"%>
6 <%@ Import Namespace="System.Globalization"%>
7
8 <script runat="server">
9
10 protected void Page_Load(object sender, EventArgs e)
11 {
12
13 }
14
15 protected void sumbitButton_Click(object sender, EventArgs e)
16 {
17 SqlConnection conn;
18 SqlCommand comm;
19 string connectionString =
20 ConfigurationManager.ConnectionStrings[
21 "ShippingSystemConnectionString1"].ConnectionString;
22 conn = new SqlConnection(connectionString);
23 comm = new SqlCommand(
24 "INSERT INTO Order(CustomerID, " +
25 "NumberofItems, DescriptionsofItems, SafeItems) " +
26 "VALUES (@CustomerID, " +
27 "@NumberofItems, @DescriptionsofItems, @SafeItems)", conn);
28 comm.Parameters.Add("@CustomerID", System.Data.SqlDbType.Int);
29 comm.Parameters["@CustomerID"].Value = int.Parse(DropDownList1.SelectedValue);
30 comm.Parameters.Add("@NumberofItems", System.Data.SqlDbType.Int);
31 comm.Parameters["@NumberofItems"].Value = numofitemstxt.Text;
32 comm.Parameters.Add("@DescriptionsofItems", System.Data.SqlDbType.VarChar);
33 comm.Parameters["@DescriptionsofITems"].Value = descofitemstxt.Text;
34 comm.Parameters.Add("@SafeItems", System.Data.SqlDbType.VarChar);
35 comm.Parameters["@SafeItems"].Value = safetxt.Text;
36 try
37 {
38 conn.Open();
39 comm.ExecuteNonQuery();
40 Response.Redirect("Success.aspx");
41 }
42 catch
43 {
44 }
45 finally
46 {
47 conn.Close();
48 }
49 }
50
51
52
53 protected void CustomerIDList_SelectedIndexChanged(object sender, EventArgs e)
54 {
55
56 }
57 </script>
58
59 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
60 <table style="position: static">
61 <tr>
62 <td style="width: 169px">
63 Customer ID:</td>
64 <td style="width: 100px">
65 <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
66 DataTextField="CustomerID" DataValueField="CustomerID" Style="position: static">
67 </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ShippingSystemConnectionString1 %>"
68 SelectCommand="SELECT [CustomerID] FROM [Customer]"></asp:SqlDataSource>
69 </td>
70 <td style="width: 178px">
71 </td>
72 </tr>
73 <tr>
74 <td style="width: 169px">
75 Number of Items:</td>
76 <td style="width: 100px">
77 <asp:TextBox ID="numofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
78 <td style="width: 178px">
79 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="numofitemstxt"
80 ErrorMessage="Number of Items Required" Style="position: static"></asp:RequiredFieldValidator></td>
81 </tr>
82 <tr>
83 <td style="width: 169px">
84 Descriptions of Items:</td>
85 <td style="width: 100px">
86 <asp:TextBox ID="descofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
87 <td style="width: 178px">
88 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="descofitemstxt"
89 ErrorMessage="Description Required" Style="position: static"></asp:RequiredFieldValidator></td>
90 </tr>
91 <tr>
92 <td style="width: 169px">
93 Are Items safe:</td>
94 <td style="width: 100px">
95 <asp:TextBox ID="safetxt" runat="server" Style="position: static"></asp:TextBox></td>
96 <td style="width: 178px">
97 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="safetxt"
98 ErrorMessage="Are Items Safe?" Style="position: static"></asp:RequiredFieldValidator></td>
99 </tr>
100 <tr>
101 <td style="width: 169px">
102 <asp:ValidationSummary ID="ValidationSummary1" runat="server" Style="position: static" />
103 </td>
104 <td style="width: 100px">
105 <asp:Button ID="sumbitButton" runat="server" OnClick="sumbitButton_Click" Style="position: static"
106 Text="Submit" /></td>
107 <td style="width: 178px">
108 </td>
109 </tr>
110 </table>
111 </asp:Content>
112
113
My order table in SQL server 2005 (express) looks like this:
View 5 Replies
View Related
Jan 27, 2004
Hello-
I have the following sql statement which produced an error when I add the order by clause
SQL = "SELECT DISTINCT nc_department.department, Count(nonconformance.department_id) as 'events', ISNULL(SUM(nonconformance.nc_wafer_qty),0) as wafers FROM nc_department LEFT OUTER JOIN nonconformance ON nc_department.department_id = nonconformance.department_id WHERE nc_department.active = '1' GROUP BY nc_department.department ORDER by nc_department.order_id"
This is the error I get:
ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
Any help appreciated
View 10 Replies
View Related
Apr 23, 2004
I'm catching a primary constraint error in SQL and don't want to return the SQL error message back to the client. Is there any way to stop this. Thankyou
View 5 Replies
View Related
May 21, 2004
I need help on this!
When I try to change the data from a table using Web Matrix, then I get this error message.
The table’s data cannot be edited because the table does not contain modifiable columns.
As I need to edit the data’s, how can I solve this?
Thanks for Your Help
Mikel
View 1 Replies
View Related
Sep 8, 2004
I finally installed MSDE and have the icon in my tray at the bottom of the screen.
When I try to connect to a database using the wizard in the web matrix program I get this message:
Unable to connect
SQL Server does not exist of access denied
Connection Open (Connect ())
What might be wrong??
Thanks for your help I'll get it soon (I hope)
Del Dobbs
View 2 Replies
View Related
Dec 17, 2004
HI FRIENDS
WHEN I TRY TO RUN A PROGRAM WHICH BINDS A DATAGRID CONTROL TO A SQL SERVER TABLE I GET A ERROR MESSAGE LIKE [SQL EXECEPTION LOGIN FAILED FOR HOMECOMPUTER/ASPNET] . IF U KNOW WHAT MIGHT COZ THE PROBLEM PLEASE TELL ME.
IAM RUNNING THE MICROSOFT SQL SERVER FORM MY HOME COMPUTER I.E (LOCAL) . IS THERE SOME SETTINGS THAT I NEED TO DO BEFORE RUNNING A PAGE WHICH CONNECTS TO THE SQL SERVER.
View 2 Replies
View Related
Jun 13, 2006
I am trying to set a text field as the primary key for a SQL SERVER Express 2005 Database in Visual Studio. I used the following Command:ALTER TABLE Tablename ADD PRIMARY KEY (fieldname);where you substitute table name and fieldname for the appropriate fields. The error message I am getting is:SQL Execution Error.Executed SQL statement: ALTER TABLE Lake ADD PRIMARY KEY(wbic);Error Source .Net SqlClient Data ProviderError Message: Column 'wbic' in table Lake is of a type that is invalid for use as a primary key column or index.Could not create constraint. See previous errors.How can I fix this so any type of field can be a primary key?
View 7 Replies
View Related
Feb 7, 2002
I am extracting data out of Lotus Notes into an Oracle DB using EM.
I keep getting an error "[Lotus][ODBC Lotus Notes] Data value is not a valid date, time or timestamp" I went ahead and dropped the destination table, and changed all of the "date" columns to varchar's, redefined the transformation, and executed package again, but still get the error. Any ideas?
Thanks!
BV
View 1 Replies
View Related
