Error Message On Preview
May 23, 2006
I am now getting this error mesaage when I try to preview my report
[rsInvalidToggleItem] The table €˜table1€™ has €˜siteref€™ as a toggle item. Toggle items must be text boxes that share the same scope as the hidden item or are in a scope that contains the hidden item, and cannot be contained within the current report item unless current grouping scope has a Parent.
What does that mean in english?
Also, if I can't fix this, is there a way to get the one that is deployed and functional on the webserver back into the report designer and reverse engineer it?
I have not touched the groupings since vewiing it last. I have only been adjusting the value boxes of three fields that I had yet to get functional.
Regards
View 4 Replies
ADVERTISEMENT
Mar 12, 2008
note: according to the product documentation parameterized queries should preview just fine.
reference: http://msdn2.microsoft.com/en-us/library/ms139904.aspx
i have an OLE DB Source
Data access mode: SQL command
i began with a simple query, and it previews just fine
i have an existing user variable in my package. its being referenced successfully by an intial "execute sql task" i have.
i then replace the where conditions with parameters.
i click on "parameters..." and map the parameters to my variables.
i click preview and an error appears.
the error message is...
There was an error displaying the preview
Additional information:
no value given for one or more required parameters. (Microsoft SQL Native Client)
any ideas or suggestions?
View 14 Replies
View Related
Sep 2, 2006
i have a data flow configured to use a ole db source. the ole db source uses an ole db connection manager pointing to the adventureworks db which suceeded when i tested its connection. the data access mode of the ole db source is "sql command". below is the sql command text:
SELECT SpecialOfferID, Description
DiscountPct, Type, Category, StartDate,
EndDate, MinQty, MaxQty, ModifiedDate
FROM Sales.SpecialOffer
WHERE ModifiedDate >= ? AND ModifiedDate < ?
this query uses 2 paramaters, each of which is mapped to a datetime variable which falls with the range of the ModifiedDate column as follows:
Parameter0: User::ExtractStartDate
Parameter1: User::ExtractStopDate
ExtractStartDate is set to 7/1/2001 and ExtractStopDate is set to 3/31/2004. however, i get the following error when i press the preview button in the ole db source editor: "there was an error displaying the preview. additional information: no value given for one or more required parameters (microsoft sql native client)".
as far as i can tell, i have the ole db source configured correctly. thus, i can't figure out why this error is being generated. has anyone else experienced this issue? if so, were you able to resolve it? is this a bug?
thanks in advance.
View 5 Replies
View Related
Jun 3, 2015
error[42000][mysql][odbc 5.3 (a) driver] mysqld-5.6.21 -log] where preview a data
View 2 Replies
View Related
May 2, 2007
My report worked fine for a while, but suddenly I started getting the following errors for Preview:
An error occurred during local report processing.
An error has occurred during report processing.
Index was outside the bounds of the array.
I restarted VS, then rebooted my machine and the problem persists. Everything including the report posted to the server works fine. It is just the Preview of this report does not work any more. Preview of other reports work fine.
Any tip to resolve this problem would be greatly appreciated.
View 4 Replies
View Related
Jul 13, 2007
Hi,
Using SQL Reporting 2005:
I have a report which has the Interactive Height set to 0 so that it does not use paging. When I try and print preview the report, I can see the report okay until I go forward after the last page, and then I get the error "An error occured trying to render the report. 0x80004005". I can print the report and it prints fine, but I get a pop-up that says that there was an error printing the report. I've narrowed it down to the interactive size property, but am not sure how to get around it.
Thanks.
View 1 Replies
View Related
Jan 28, 2008
Hi SSRS Experts
I'm trying to create a report using a SAP BI InfoCube as my datasource.
One of the fields in the InfoCube (GL Account) consist of a 3 level hierarchy, which need to be reported on.
The query that I built using QueryBuilder executes fine and displays the hierarchies correctly, but when I preview the report, i get the following error:
An error occurred during local report processing
An error has occurred during report processing
Query execution failed for data set "SAPBWD"
The "0GL_ACCOUNT 1000IE" Object was not found.
0GL_ACCOUNT is the GL account field to report on
1000IE is the selected GL Account Hierarchy to be displayed
Here's the query that was generated using query builder:
SELECT NON EMPTY { [Measures].[D2A3Y7ANS9YOF2FONXMUS9RAI] } ON COLUMNS, NON EMPTY {[0GL_ACCOUNT 1000IE].[LEVEL03].ALLMEMBERS * [ZF_MC].[LEVEL01].ALLMEMBERS } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [ZFGL_M03/ZREP_BOR001] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING SAP VARIABLES [ZFV_FY] INCLUDING [0FISCYEAR].[Z12007] [ZFV_PC] INCLUDING [0PROFIT_CTR 1000FS].[10000001000033] [ZFV_RM] INCLUDING [0FISCPER3].[005] [ZFV_PV] INCLUDING [0VERSION].[003]
I hope you would be able to assist.
Kind Regards
Utian Goliath
View 1 Replies
View Related
Jan 3, 2008
Source: MS SQL Server 6.5
Destination: MS SQL Server 2005 (SP2 installed)
Suppl Ver Info: Microsoft.SqlServer.MaintenancePlanTasks.dll (ver 9.0.3043.0)
Desc:
When copying one table from source to destination (using import export wizard), the following error shows. However, when using query select * from tbl_1 can shows preview correctly. (but still need to save as SSIS, and change codepage property before it works)
===================================
The preview data could not be retrieved. (SQL Server Import and Export Wizard)
===================================
Line 1: Incorrect syntax near '['. (Microsoft OLE DB Provider for SQL Server)
------------------------------
Program Location:
at System.Data.OleDb.OleDbDataReader.ProcessResults(OleDbHResult hr)
at System.Data.OleDb.OleDbDataReader.NextResult()
at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader()
at Microsoft.SqlServer.Dts.DtsWizard.Preview.LoadPreview()
When executing the wizard, the following error shows (the table exists, of course)
===================================
Could not connect source component.
Error 0xc0202009: Source - tbl_1[1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error 0xc02020e8: Source - tbl_1[1]: Opening a rowset for "[db_1].[sch_1].[tbl_1]" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
===================================
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
Could anybody please kindly help me on that?
View 2 Replies
View Related
Feb 28, 2007
Please... any ideas? Is this a footprint config issue?
TITLE: Microsoft Visual Studio
There was an error displaying the preview.
ADDITIONAL INFORMATION:
Could not load file or assembly
'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0,
Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its
dependencies. The system cannot find the file specified.
(Microsoft.DataTransformationServices.Design)
BUTTONS:
OK
===================================
There was an error displaying the preview. (Microsoft Visual Studio)
===================================
Could not load file or assembly
'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0,
Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its
dependencies. The system cannot find the file specified.
(Microsoft.DataTransformationServices.Design)
------------------------------
Program Location:
at
Microsoft.DataTransformationServices.Design.PipelineUtils.ShowDataPreview(String
sqlStatement, ConnectionManager connectionManager, Control
parentWindow, IServiceProvider serviceProvider,
IDTSExternalMetadataColumnCollection90 externalColumns)
at
Microsoft.DataTransformationServices.DataFlowUI.DataFlowConnectionPage.previewButton_Click(Object
sender, EventArgs e)
View 1 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
May 22, 2007
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies
View Related
Nov 20, 2006
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
View 5 Replies
View Related
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
Oct 18, 2007
Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
View 4 Replies
View Related
Oct 10, 2007
where can i find it?
thanks
View 4 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
Oct 19, 2007
I have a SQL Express database on our server that is used for one of our websites when the website tries to write to the database I get the following error: -
An attempt to attach an auto-named database for file D:lahwebsitesGiants North Walesapp_datadatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This error is very frustrating and I really can't find a way around it. I have done the following: -
Deleted the SQL Server Express folders under user preferences
View 3 Replies
View Related
Feb 29, 2008
Hi,I am trying to write some C# ASP.NET 2.0 code. I have created a web form to send data to my sql server 2005 database. When I compile the application and insert data then click on the submit button I get this error
"A first chance exception of type
'System.Data.SqlClient.SqlException' occurred in System.Data.dll" I have been trying to solve this for a few days now with no luck, so any help would be appreciated. I'll post below the source code of the web form (addOrder.aspx). It might be worth mentioning that I have created another web form in the same project called addCustomer.aspx. Like addOrder.aspx it is a web form, however it successfully inserts data in the database. 1 <%@ Page Language="C#" MasterPageFile="~/Default.master" Title="Add Order Page" %>
2 <%@ import namespace="System.Data.SqlClient" %>
3 <%@ Import Namespace="System.Data" %>
4 <%@ Import Namespace="System.Web" %>
5 <%@ Import Namespace="System.Configuration"%>
6 <%@ Import Namespace="System.Globalization"%>
7
8 <script runat="server">
9
10 protected void Page_Load(object sender, EventArgs e)
11 {
12
13 }
14
15 protected void sumbitButton_Click(object sender, EventArgs e)
16 {
17 SqlConnection conn;
18 SqlCommand comm;
19 string connectionString =
20 ConfigurationManager.ConnectionStrings[
21 "ShippingSystemConnectionString1"].ConnectionString;
22 conn = new SqlConnection(connectionString);
23 comm = new SqlCommand(
24 "INSERT INTO Order(CustomerID, " +
25 "NumberofItems, DescriptionsofItems, SafeItems) " +
26 "VALUES (@CustomerID, " +
27 "@NumberofItems, @DescriptionsofItems, @SafeItems)", conn);
28 comm.Parameters.Add("@CustomerID", System.Data.SqlDbType.Int);
29 comm.Parameters["@CustomerID"].Value = int.Parse(DropDownList1.SelectedValue);
30 comm.Parameters.Add("@NumberofItems", System.Data.SqlDbType.Int);
31 comm.Parameters["@NumberofItems"].Value = numofitemstxt.Text;
32 comm.Parameters.Add("@DescriptionsofItems", System.Data.SqlDbType.VarChar);
33 comm.Parameters["@DescriptionsofITems"].Value = descofitemstxt.Text;
34 comm.Parameters.Add("@SafeItems", System.Data.SqlDbType.VarChar);
35 comm.Parameters["@SafeItems"].Value = safetxt.Text;
36 try
37 {
38 conn.Open();
39 comm.ExecuteNonQuery();
40 Response.Redirect("Success.aspx");
41 }
42 catch
43 {
44 }
45 finally
46 {
47 conn.Close();
48 }
49 }
50
51
52
53 protected void CustomerIDList_SelectedIndexChanged(object sender, EventArgs e)
54 {
55
56 }
57 </script>
58
59 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
60 <table style="position: static">
61 <tr>
62 <td style="width: 169px">
63 Customer ID:</td>
64 <td style="width: 100px">
65 <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
66 DataTextField="CustomerID" DataValueField="CustomerID" Style="position: static">
67 </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ShippingSystemConnectionString1 %>"
68 SelectCommand="SELECT [CustomerID] FROM [Customer]"></asp:SqlDataSource>
69 </td>
70 <td style="width: 178px">
71 </td>
72 </tr>
73 <tr>
74 <td style="width: 169px">
75 Number of Items:</td>
76 <td style="width: 100px">
77 <asp:TextBox ID="numofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
78 <td style="width: 178px">
79 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="numofitemstxt"
80 ErrorMessage="Number of Items Required" Style="position: static"></asp:RequiredFieldValidator></td>
81 </tr>
82 <tr>
83 <td style="width: 169px">
84 Descriptions of Items:</td>
85 <td style="width: 100px">
86 <asp:TextBox ID="descofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
87 <td style="width: 178px">
88 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="descofitemstxt"
89 ErrorMessage="Description Required" Style="position: static"></asp:RequiredFieldValidator></td>
90 </tr>
91 <tr>
92 <td style="width: 169px">
93 Are Items safe:</td>
94 <td style="width: 100px">
95 <asp:TextBox ID="safetxt" runat="server" Style="position: static"></asp:TextBox></td>
96 <td style="width: 178px">
97 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="safetxt"
98 ErrorMessage="Are Items Safe?" Style="position: static"></asp:RequiredFieldValidator></td>
99 </tr>
100 <tr>
101 <td style="width: 169px">
102 <asp:ValidationSummary ID="ValidationSummary1" runat="server" Style="position: static" />
103 </td>
104 <td style="width: 100px">
105 <asp:Button ID="sumbitButton" runat="server" OnClick="sumbitButton_Click" Style="position: static"
106 Text="Submit" /></td>
107 <td style="width: 178px">
108 </td>
109 </tr>
110 </table>
111 </asp:Content>
112
113
My order table in SQL server 2005 (express) looks like this:
View 5 Replies
View Related
Jan 27, 2004
Hello-
I have the following sql statement which produced an error when I add the order by clause
SQL = "SELECT DISTINCT nc_department.department, Count(nonconformance.department_id) as 'events', ISNULL(SUM(nonconformance.nc_wafer_qty),0) as wafers FROM nc_department LEFT OUTER JOIN nonconformance ON nc_department.department_id = nonconformance.department_id WHERE nc_department.active = '1' GROUP BY nc_department.department ORDER by nc_department.order_id"
This is the error I get:
ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
Any help appreciated
View 10 Replies
View Related
Apr 23, 2004
I'm catching a primary constraint error in SQL and don't want to return the SQL error message back to the client. Is there any way to stop this. Thankyou
View 5 Replies
View Related
May 21, 2004
I need help on this!
When I try to change the data from a table using Web Matrix, then I get this error message.
The table’s data cannot be edited because the table does not contain modifiable columns.
As I need to edit the data’s, how can I solve this?
Thanks for Your Help
Mikel
View 1 Replies
View Related
Sep 8, 2004
I finally installed MSDE and have the icon in my tray at the bottom of the screen.
When I try to connect to a database using the wizard in the web matrix program I get this message:
Unable to connect
SQL Server does not exist of access denied
Connection Open (Connect ())
What might be wrong??
Thanks for your help I'll get it soon (I hope)
Del Dobbs
View 2 Replies
View Related
Dec 17, 2004
HI FRIENDS
WHEN I TRY TO RUN A PROGRAM WHICH BINDS A DATAGRID CONTROL TO A SQL SERVER TABLE I GET A ERROR MESSAGE LIKE [SQL EXECEPTION LOGIN FAILED FOR HOMECOMPUTER/ASPNET] . IF U KNOW WHAT MIGHT COZ THE PROBLEM PLEASE TELL ME.
IAM RUNNING THE MICROSOFT SQL SERVER FORM MY HOME COMPUTER I.E (LOCAL) . IS THERE SOME SETTINGS THAT I NEED TO DO BEFORE RUNNING A PAGE WHICH CONNECTS TO THE SQL SERVER.
View 2 Replies
View Related
Jun 13, 2006
I am trying to set a text field as the primary key for a SQL SERVER Express 2005 Database in Visual Studio. I used the following Command:ALTER TABLE Tablename ADD PRIMARY KEY (fieldname);where you substitute table name and fieldname for the appropriate fields. The error message I am getting is:SQL Execution Error.Executed SQL statement: ALTER TABLE Lake ADD PRIMARY KEY(wbic);Error Source .Net SqlClient Data ProviderError Message: Column 'wbic' in table Lake is of a type that is invalid for use as a primary key column or index.Could not create constraint. See previous errors.How can I fix this so any type of field can be a primary key?
View 7 Replies
View Related
Feb 7, 2002
I am extracting data out of Lotus Notes into an Oracle DB using EM.
I keep getting an error "[Lotus][ODBC Lotus Notes] Data value is not a valid date, time or timestamp" I went ahead and dropped the destination table, and changed all of the "date" columns to varchar's, redefined the transformation, and executed package again, but still get the error. Any ideas?
Thanks!
BV
View 1 Replies
View Related
Jun 20, 2001
Has anyone seen these error messages.....
17066: SQL Server Assertion: File: <proc.c>, line=1927
Failed Assertion = 'm_activeSdesList.Head () == NULL'.
and
1203, Severity: 20 State: 1
Process ID 8 attempting to unlock unowned resource KEY:
7:1402200252:6 (f80117756d42).
View 2 Replies
View Related
Oct 18, 2001
I am running across this error message: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Has anyone seen this before? Can you perform a fetch or do a loop? I am kind of new at sql and not really sure how either of these work or how to start to code something like that.
Thanks!
Terry
View 2 Replies
View Related
Oct 26, 2000
When I ran below stored procedure, I got error message.
create procedure pro_log
as
declare@Execution_String varchar(255),
@logfilevarchar(112)
select@logfile = 'server_name(F:)folder_namelog_name'+convert(varc har(8),getdate(),112)+'.log'
Select @Execution_String = '(F):Mssql7Binnisql -S server_name -U user_name -P password -d datebase_name -q"procedure_name" > ' + @logfile
Print @Execution_String
Execute master..xp_cmdshell @Execution_String
return
GO
exec pro_log
************************************************** *************************
Mssql7Binnisql was unexpected at this time.
(1 row(s) affected)
************************************************** *************************
Any body can please tell me what is meant by above error message?
View 5 Replies
View Related
Jan 10, 2001
I am running a program on SQL 6.5 server and I am getting this error message:
Can't allocate space for object '-451' in database 'tempdb' because the 'system' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment. Sort failed: Out of space or locks in database 'tempdb'
Can somebody help me resolve this error message? Thanks a lot
Isabel
View 1 Replies
View Related
Nov 16, 2001
hi,
i am getting the following error message whenever i run my sql server. the error message is
================================================== ========
The ODBC resource DLL(c:WINNTsystem32odbcint.dll) is a different
version than the ODBC driver manager (C:winntsystem32ODBC32.dll)
You need to reinstall the ODBC components to ensure proper operation.
================================================== ===========
i also get the foll message while starting the windows also
================================================== ==========
msdtc.exe entry level not found
================================================== ==========
can anyone tell me what should i do to rectify this problem
regards
prady
View 2 Replies
View Related
Mar 6, 2001
Hi All,
Can anyone tell me what this error means..
Error: 0, Severity: 20, State: 0
Stored function 'xp_sqlmaint' in the library 'xpstar.dll' generated an
access violation. SQL Server is terminating process 10.
Thanks,
Venu
View 1 Replies
View Related
