Error = [Microsoft][SQL Native Client]Unable To Op
May 2, 2008
As long as the output file is written to the local client, it completes successfully. But after changing the UNC path to another server with or without fully qualified names it is unable to open BCP host data-file. (sample shown below)
-----------------------------------------------------------------
DECLARE @FileNamevarchar(2000),
@bcpCommandvarchar(2000)
SET @FileName =REPLACE('\stladminy_drive ransfer
maffrandauthors_'+CONVERT(char(8),GETDATE(),1)+'.txt','/','-')
SET @bcpCommand ='bcp "SELECT * FROM FKIAcctReceivable.dbo.PurchaseOrder" queryout "'
SET @bcpCommand =@bcpCommand + @FileName + '" -T -c'
EXEC master..xp_cmdshell @bcpCommand
---------------------------------------------------
xp_cmdshell has been enabled and the user has sysadmin rights.
Anybody have the same problem and willing to help?
View 3 Replies
ADVERTISEMENT
May 2, 2006
On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS
Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)
I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?
View 2 Replies
View Related
Apr 24, 2008
I am starting to see this error appear randomly? This is on an application that uses ASP, but its been working fine for months... I'm using SQLExpress 2005 on Win2003 IIS6Microsoft SQL Native Client error '80040e21'
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.I'm trying to figure out why its happening all of a sudden? Any ideas very appreciated...
View 4 Replies
View Related
Nov 20, 2006
The below error happens when trying to use the SSIS Transfer SQL Server Objects Task to transfer objects. Related to (Bug?? Transfer SQL Server Objects Task - error when copying Views )?
--------------------
Error: 0xC002F325 at Transfer Data (NEW) Pre, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: Transfer Data (NEW) Pre
View 2 Replies
View Related
Mar 2, 2008
Hi try to connect with driver {SQL Sever Client} but i can't
I'm have SQL Server 2005 Express SP2
Error connecting to the ODBC server:[Microsoft][SQL Native Client][SQL Server] Changed database context to..
Please Help me
Thanks
View 10 Replies
View Related
Dec 14, 2007
Hi there,
I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)
To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.
Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...
Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from
I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...
I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)
I am running the ssis pakage from the server which is the destination
As mentioned above the Timeout on the SQL Server Destination Objects is set to 0
What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...
Can
View 8 Replies
View Related
Apr 10, 2007
Hi
i connect to remote Integration Service. i configure server for remote connection( on component services and DCOM config , ... ) .and now i can connect to Integration Service remotely and correctly.
but when i expand Stored Package and then click to expand MSDB this error will hapen:
login failed for user ... .(microsoft sql native client )
please help me
thanks in advance
View 1 Replies
View Related
Aug 7, 2015
I have a bcp command that works in 2008 standard edition but not in sql 2012 developer edition.
I'm using the SA account in both cases to a local sql server.
Results are attached.
set nocount on
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
go
select @@version
go
select @@MICROSOFTVERSION
go
exec sp_configure 'xp_cmdshell'
[Code] ......
View 2 Replies
View Related
Dec 16, 2007
Hello,I'm trying to install the SQL Server 2005 Standard edition and while I can easily install the first part of the package, the
document.write(L_LINK_RUNINSTALL_VAR_TEXT)
Server components, tools, Books Online, and samples, when I click
to install the Run the SQL Native Client Installation Wizard it tells me this:This Microsoft sql server native client package is not supported on the current processor type
I have Windows XP64bit with IIS running on 32bit now. Why does it do that and how I can get around it ? :) Thanks.
View 3 Replies
View Related
Apr 14, 2008
We scheduled lot of SSIS packages on 64 bit server and most of the time they are running fine. Some times we are getting below error message on any random package. When we re-run its working fine to success. This is repeating once in a week on different packages.
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_TblObject'. Cannot insert duplicate key in object 'dbo.tblObject'."
Please let me know if you have any solutions?
View 3 Replies
View Related
May 10, 2006
Product: Microsoft SQL Server 2005 -- Error 29515. SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]Encryption not supported on the client. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
View 78 Replies
View Related
Nov 1, 2006
Hi,
I have SQL2000 installed as the default instance, and now I'm trying to install SQL 2005 standard edition as a named instance.
I receive this error :
SQL Server could not connect to database service for server configuration.. [SQL Native client] Encryption not supported on the client. However I'm able to install client tools
The setup works fine on other box with the same config : SQL 2000/Windows XP, is there any work around for this issue ?
In my SQL 2000 client network utilty "Force proctocol encryption " is desabled and did not find the setting for SQL 2005 !
Thank you
View 1 Replies
View Related
Dec 14, 2007
Hi all,
I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link
http://channel9.msdn.com/ShowPost.aspx?PostID=142941
First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.
Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.
View 4 Replies
View Related
Oct 26, 2007
How to use Microsoft Data Link(Udl) type file to connect with SQL Server using SQL Native Client,If i use OLDEDB Connection i can make connection using UDL file with Database ,but how can i use a file for a connection using SQL Native Client.Is there any other data link file that can be used to connect with SQL server using SQL Native Client.
View 5 Replies
View Related
Sep 5, 2007
I'm new in this forum and I 'm Italian, so my English won't be perfect!
If i want to connect to my SQL Server database in prompt i type:
"osql -U sa" and then i type the password.
So, I get an error that says:
"[Sql Native Client] Provider Via: Impossible to find the specified module.
[Sql Native Client] Access timeout expired
[Sql Native Client] An error occured during the attempt to estabilish a connection to the server. During the connection to SQL Server this error may be caused by pre-defined settings that don't ......"
How i can solve this problem?
Who can help me?
Thank you!!
Maxx
View 3 Replies
View Related
Sep 5, 2007
I'm new in this forum and I 'm Italian, so my English won't be perfect!
If i want to connect to my SQL Server database in prompt i type:
"osql -U sa" and then i type the password.
So, I get an error that says:
"[Sql Native Client] Provider Via: Impossible to find the specified module.
[Sql Native Client] Access timeout expired
[Sql Native Client] An error occured during the attempt to estabilish a connection to the server. During the connection to SQL Server this error may be caused by pre-defined settings that don't ......"
How i can solve this problem?
Who can help me?
Thank you!!
Maxx
View 1 Replies
View Related
Apr 16, 2008
The following (VB.Net) code causes exceptions at seemingly random times.
Any suggestions?
Not sure if the problem is in .Net's ODBC support or in Sql Native Client.
If MARS is off, usually after less than 100 loops:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [HY000] [Microsoft][SQL Native Client]Connection is busy with results for another command"
Source="SQLNCLI.DLL"
Turning MARS is on bypasses that error, so it will sometimes survive a thousand or so runs before hitting:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [23000] [Microsoft][SQL Native Client][SQL Server]Cannot insert the value NULL into column 'Number', table 'tempdb.dbo.#TempTable___..(shortened to fit).. _________000000002F3F'; column does not allow nulls. INSERT fails.
Source="SQLNCLI.DLL"
Code here:
(Console Application, empty database,
Visual Studio 2005, .Net 2.0, Windows XP,SQL Server 2005 or SQL Express 2005, Local or Remote)
Code Snippet
Module Module1
Sub Main()
'Dim connection As New SqlClient.SqlConnection("database=TestDB;server=.sqlexpress;Integrated Security=SSPI;") 'Doesn't crash
'Dim connection As New OleDb.OleDbConnection("Provider=SQLNCLI;database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Doesn't crash
'Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Crashes
Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;MARS_Connection=yes") 'Crashes
VBMath.Randomize()
Dim run_count As Integer = 1
connection.Open()
Console.WriteLine("Connected!!")
While True
'connection.Open()
Dim testcmd As New Odbc.OdbcCommand("CREATE TABLE [#TempTable] (Number int PRIMARY KEY)", connection)
testcmd.ExecuteNonQuery()
testcmd.Dispose()
testcmd = Nothing
Dim dtTemp As New DataTable
Dim daTemp As New Odbc.OdbcDataAdapter("SELECT * FROM [#TempTable]", connection)
daTemp.MissingSchemaAction = MissingSchemaAction.AddWithKey
daTemp.Fill(dtTemp)
Dim cbTemp As New Odbc.OdbcCommandBuilder(daTemp)
Dim viewTemp As New DataView(dtTemp, Nothing, "Number", DataViewRowState.CurrentRows)
Dim i As Integer
For i = 1 To 1000
Dim test_number As Integer = CInt(Rnd() * 2000)
If viewTemp.Find(test_number) = -1 Then 'Keep it unique
Dim new_temp_row As DataRowView = viewTemp.AddNew()
new_temp_row("Number") = test_number
new_temp_row.EndEdit()
End If
Next
daTemp.Update(dtTemp)
'daTemp.Dispose()
'daTemp = Nothing
'cbTemp.Dispose()
'cbTemp = Nothing
'dtTemp.Dispose()
'dtTemp = Nothing
'viewTemp.Dispose()
'viewTemp = Nothing
Dim testcmd2 As New Odbc.OdbcCommand("DROP TABLE [#TempTable]", connection)
testcmd2.ExecuteNonQuery()
testcmd2.Dispose()
testcmd2 = Nothing
'connection.Close()
'GC.Collect()
'Console.Write(".")
run_count += 1
End While
End Sub
End Module
Usually the ".Update" triggers the exception, but sometimes the other sql commands do it.
Have tried various experiments with disposing of objects immediately when finished, but no effect.
Opening and closing the connection each loop seems to delay the errors, but it still happens eventually.
View 7 Replies
View Related
Mar 18, 2008
Hello All,
I am trying to create a local database.............using a simple tool called BuildDatabase.cmd for example this is what i pass in the command prompt
C:My.databaseBuildDatabase SAMPLE1SQLEXPRESS MyTestDatabase
this is the error i am getting........
[SQL Native Client]SQL Network Interfaces: Error Locating Server/InstanceSpecified [xFFFFFFFF].[SQL Native Client]Login timeout expired[SQL Native Client]An error has occurred while establishing a connection tothe server. When connecting to SQL Server 2005, this failure may be caused bythe fact that under the default settings SQL Server does not allow remoteconnections.
WARNING! Drop/Create Errors
can someone please help me out....how to fix this.
Thanks a lot
View 2 Replies
View Related
Sep 19, 2006
Hi !
How to avoid a SQL Native Client Instalation (a corrupted package ? from MSDN Disc !?) during MS SQL 2005 Server Standard instalation on MS Windows Vista Ultimate RC1 ?!?
Generally after this error all instalation failed !
Thanks in advance.
View 2 Replies
View Related
Nov 22, 2015
I am trying to obtain access to SQL Server Native Client OLE DB provider using :
hr = CoCreateInstance(CLSID_SQLNCLI11, NULL, CLSCTX_INPROC_SERVER, IID_IDBInitialize,
(void **) &PIDBInitialize);
and this fails with 80040154 error. I am using sqlserver 2012 and everything worked perfectly fine as long as my application was running on the same machine as sql server was installed but now that the app is deployed in a different environment in which the app runs on a separate server than the server which has the database and sql server I am failing with this error even though the sql server version on the target server is same as mine.
View 3 Replies
View Related
Oct 16, 2007
Does anyone know if this is a SQL Native Client bug? I've read a previous thread (posted back on Jan. 18th, 2007) about this error, but there are no replies. I am getting this error when I issue the sp_setapprole command using sqlexecdirect() ODBC api call. Is there any way to work around this? Or is there a fix to the SQL Native Client? The error 15002 message text states "The procedure sys.sp_setapprole cannot be executed within a transaction". This is on a new connection so there should be no transactions active at the time. Thanks in advance for any info anyone can provide on this.
View 5 Replies
View Related
Aug 15, 2007
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e
ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
ODBC Driver: SQL Native Client
SQL server 2005
Table
CREATE TABLE [dbo].[RAVI_TEMP](
[ID] [int] NULL,
[Name] [varchar](max) NULL,
[CITY] [varchar](50) NULL
)
VC++ code
#include "stdafx.h"
#include <string>
#include <strstream>
#include <iomanip>
int main(int argc, char* argv[])
{
try
{
HRESULT hr = CoInitialize(NULL);
_RecordsetPtr pExtRst = NULL;
_bstr_t bstrtDSN, bstrtSQL;
bstrtDSN = L"DSN=espinfo;UID=opsuser;PWD=opsuser;";
bstrtSQL = L"SELECT * FROM RAVI_TEMP";
_variant_t vartValueID,vartValueNAME,vartValueCITY;
_bstr_t bstrtValueID,bstrtValueNAME,bstrtValueCITY;
pExtRst.CreateInstance(__uuidof(Recordset));
hr = pExtRst->Open(bstrtSQL, bstrtDSN, adOpenDynamic, adLockOptimistic, adCmdText);
hr = pExtRst->AddNew();
bstrtValueID = L"1";
vartValueID = bstrtValueID.copy();
bstrtValueNAME = L"RAVIBABUBANDARU";
vartValueNAME = bstrtValueNAME.copy();
bstrtValueCITY = L"Santa Clara";
vartValueCITY = bstrtValueCITY.copy();
pExtRst->GetFields()->GetItem(L"ID")->Value = vartValueID;
pExtRst->GetFields()->GetItem(L"NAME")->Value = vartValueNAME;
pExtRst->GetFields()->GetItem(L"CITY")->Value = vartValueCITY;
pExtRst->Update();
pExtRst->Close();
}
catch(_com_error e)
{
printf("Exception Description %s and Error Number:: %d",(LPTSTR)e.Description(),e.Error());
return e.Error();
}
return 0;
CoUninitialize();
}
if i use regular SQL ODBC driver, no error but its truncating the data
Adv Thanks for your help
View 1 Replies
View Related
Mar 3, 2007
Hi,
While using Sql Native Client ,VB Application giving error
"Transcation Cannot Start because more than one ODBC connection is in use"
But when useing SqlServer client then work perfectly ok.
Please guide where to use Sql Native Client.
Thanks
Rizwan
View 1 Replies
View Related
Apr 23, 2008
I have tried this on several different operating systems (VISTA and XP ) and several versions of SQL NATIVE CLIENT including 2005.90.3042.0
I have a 64 bit "SQL NATIVE CLIENT" connection that fails. The exact same connection and code succeeds on 32 bit.
My customer and I prepend "oledb:" to the connection string and it starts working.
FAILS on 64 bit:
Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
WORKS
oledb:Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
I debugged my code to the point that I know it is happening when I call CreateAccessor for my SQL statement.
m_hr=m_pIAccessor->CreateAccessor(DBACCESSOR_ROWDATA, GetCols(), (m_pDBBinds+IsBookmarked()), 0, &m_hAccessor, NULL);
Error:
Microsoft SQL Native Client: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
Does anyone have any suggestions?
View 6 Replies
View Related
Jul 11, 2007
Hi to everyone!
Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.
I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.
When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...
Can anyone help me?
View 6 Replies
View Related
Mar 12, 2007
Only one of our users is getting this error
unable to load client print control
She was able to print fine before, any idea why this is happening.
View 1 Replies
View Related
Apr 13, 2006
Hello,
We are running SQL2K5 and have a Web server with a family of sites all sharing an identical connection string to enable ADO connection pooling between them. Today for about 20 minutes we had several (all?) connections from one site that uses a specific DB get a connection reuse error which showed in out SQL logs:
DESCRIPTION: The client was unable to reuse a session with SPID #, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
We also have SQL Server slowdown and log in problems from other applications that seemed a symptom of this, or some third unknown cause. Note, the # means the run-time spid number was inserted. The misspelling "conection" comes right out of sys.messages (it is not our custom error):
select top 10 * from sys.messages where message_id = 18056
The immediately preceeding error in the SQL Log was always:
Message
Error: 18056, Severity: 20, State: 29.
Where Severity and State vary, but "Error: 18056" is consistent, although I can find no documentation on "Error: 18056" through Google or MSDN.
Also, the "The client was unable to reuse a session ..." error seems not to be referred to anywhere.
In our IIS logs, the matching entries are of the form:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
and
Invalid connection string attribute
My questions: Does anyone have experience with this error? We have real good history with ADO connection pooling, but can a "bad" connection be pooled, and if so can it be "flushed" or the pool "drained"?
Thank you for anything you have to offer!
View 13 Replies
View Related
Nov 16, 2015
We have recently upgraded our .Net web application from a windows 2003 server to a windows 2012 server. Since this happened users that are trying to print a reporting services report is getting the error "Unable to load client print control". We are using reporting services 2012, but the application is using the 8 version of the viewer. The reporting services server did not change only the application server. The code for the application did not change.
View 4 Replies
View Related
Feb 20, 2007
Hello.
Does anybody knowk if it's necessary to upgrade Sql Native Client to conect to a Server when you has upgrade it to Sql 2005 SP2? That is to say, can you conect to a Sql server 2005 SP1 and to a Sql Server 2005 SP2 from a client with the same Sql Native client or you have also to upgrade it?
Thanks.
View 7 Replies
View Related
May 14, 2007
We have a VB6 app that we're trying to connect to an SQL2005 server.
We're able to connect from dev machines that have SQLExpress, or SQL 2005 tools installed, but we cannot connect from other machines. We've installed sqlncli.msi from the MS site, but this still doesn't work. When we try to login, we get an error that reads "0[Microsoft][SQL Native Client]Fractional truncation" when we try writing to a smalldatetime field. This problem does not happen on the dev machines.
Connection string:
connectiontype = cnnSQLServer
database name = name
pasword = password
userid = uid
servername = servername
driver = {SQL Native Client}
Driver version on the dev machines is: 2005.90.3042.00
Driver version on the roll out machines is: 2005.90.1399.00
What are we doing wrong?
Zeke.
View 1 Replies
View Related
Nov 23, 2006
Hi,
I currently have SQL2005 Std, using 2 separate domain accounts for both SQL server and SQL agent. When accessing the MSDB stored packages folder from mgmt studio, I get the following error:
Client unable to establish connection.
Encryption not supported on SQL server.
I did google for this error, but have tried all suggestions, including updating the MsDtsSvr.ini.xml file with the servername. I am using a default instance.
Also, I am only able to access the MSDB folder if I set the SQL service account to the local admin account. I have also set the SQL service account to be part of the local admins group, but without any luck.
TIA.
View 1 Replies
View Related
Aug 16, 2007
We're upgrading from SQL2K to 05 next week. We want to push the SQL Native Client driver(ODBC) thru the network but IT said it can only be an msi or exe file. Is their anyway we could get this file in this format?
View 4 Replies
View Related
Mar 11, 2007
Hello,
Can I use the "SQLOLEDB" provider to connect to a SQL Native Client? Follow-up question: does the "SQLOLEDB" provider use the same TDS transport protocol as the SQL Native Client provider?
Thanks as always!
dotBomb
View 6 Replies
View Related
