Hi All,
I have a report which has two subreports in a table.First Sub report1 ,then a detail section and sub report 2.
Sub report1 runs fine.But sub report2 gives error in the main report"
Query execution failed for data set 'DataSet_azshdsd30'.
For both the sub reports parameters passed from the main report are same(2 parameters).
When I run sub report2 indivisually it gives right result.But not in the main report.
Also when I put Subreport 2 in place of subreport 1 I do get the results in the main report.
Any idea,any body??
Thanks.
I'm having a problem sending the query set as an email text attachment. Test transmissions from Database mail working fine.
Send simple messages with the sp_send_dbmail sproc works fine as well.
It is only when I try and send a query result that things blow up. The query itself is working fine also, so I'm now down to think there is some esoteric problem with the sproc itself.
Surface config features have database mail on, and SQL Mail off.
Msg 14661, Level 16, State 1, Procedure sp_send_dbmail, Line 476 Query execution failed: Error initializing COM Msg 0, Level 11, State 0, Line 0 A severe error occurred on the current command. The results, if any, should be discarded.
Investigating the sproc itself shows...
Line 476 in the sproc is the beginning of a 'trap' --Raise an error it the query execution fails -- This will only be the case when @append_query_error is set to 0 (false) IF( (@RetErrorMsg IS NOT NULL) AND (@exclude_query_output=0) ) BEGIN RAISERROR(14661, -1, -1, @RetErrorMsg) END
RETURN (@rc) this is the last section of code in the sproc
I'm facing a strange problem.. I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web. in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also.. if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue thanks in adv.
Have run about six downlowds and all fail with same problem. The installer seems to be missing a file. all other parts of Viz studio Exp install but NOT the sql server exp.
Am I the only one getting this ? and if so what is the problem?. All other Visual Dev Express parts have instald OK.
Run on XP home SP2. As I posted this I noticed the compiler time stamp is 4 days ahead of real time ???
From the install log:
Complete: ParseBootstrapOptionsAction at: 2006/9/22 15:34:19, returned false Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run: Could not parse command line due to datastore exception. Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Wed Oct 26 16:38:20 2005 Function Name: writeEncryptedString Source Line Number: 124 ---------------------------------------------------------- writeEncryptedString() failed Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Wed Oct 26 16:38:20 2005 Function Name: writeEncryptedString Source Line Number: 123
I have created and deployed my first report. It renders fine for me and the other database admin. When others attempt to view it, we get the error
Query execution failed for data set 'periods'. (rsErrorExecutingCommand), For more information about this error navigate to the report server on the local server machine, or enable remote errors
Initially, We created a local group on the machine that hosts both the database and webserver and added the individuals to that group. Then, within SRS Report manager, we added that group to the Browswer role of the report. The error message was slightly different, in that it couldn't even open the Datasource.
We then added an individual to the database as dbreader, and got the above message. It apprently is starting to render, and when it encounters the first query (dataset "periods", which populates a drop down list for a parameter), it chokes. BTW, the Periods dataset executes a stored procedure dbo.Period_List that has no parameters. It returns a list of reporting periods.
I could not figure out how to "enable remote errors" or find an error log on the server. The C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles Log files did not appear to record any errors.
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
strange behaviour in our production environment, while in the test servers all goes ok:
web application with web report viewer, the report is fine but clicking on "preview" or "print" an error 0x800C008 occurs.
The report include 3 subreports, and here's the problem: after some attempts i realized that each subreport (alone in the master report) works fine, but more than 1 in the same master report produces the error!
w3wp!library!7!04/17/2007-11:23:55:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Errore interno nel server di report. Per ulteriori informazioni, vedere il log degli errori., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Errore interno nel server di report. Per ulteriori informazioni, vedere il log degli errori.
Does anyone else experience Visual Studio 2005 shutting down when they try to preview a report which has a subreport contained in a table or list?Error Log:Description:Faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, faulting module kernel32.dll, version 5.1.2600.2180, stamp 411096b4, debug? 0, fault address 0x0001eb33.Description:Bucket 358802311, bucket table 1, faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, faulting module kernel32.dll, version 5.1.2600.2180, stamp 411096b4, debug? 0, fault address 0x0001eb33.
I have a report in SSRS 2008 R2 that has multiple subreports, in fact the report uses the same subreport twice with different parameters. Then that subreport also has a subreport, which has a subreport. (It's a complex data scenario with a hierarchy that can go up to three layers deep.) The report renders fine in report viewer, but when I try to export to PDF I get the following error:
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Object reference not set to an instance of an object.
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
[Code] ....
Each subreport renders correctly to PDF, and if I remove either subreport from the main report, it also renders correctly. But the two subreports together on the report cause the error.
Removing the third hierarchy layer (the final one) fixes the issue. Is there a limit to the number of nested subreports when rendering to a pdf?
In my C# asp.net website I am using a qurey select GPM.propertyId,GURM.userName,GURM.phone from Gatepropertymaster1 GPM,GateUserMaster GURM where GPM.userId=GURM.userId and GPM.propertyTypeId='" + PropertyTypeId + "' and GPM.transationTypeId='" + TransationTypeId + "' and GPM.cityId='" + CityId + "' order by GPM.regDate descin some cases input PropertyTypeId may be 0 or transationTypeId may be 0 or cityId may be 0, How can I use the same qurey even though these Ids(propertyId,TransationTypeId,cityId) may be 0 in some cases Thanks in advanceAnu Palavila
I am working on a multi level payout system with a parent child table for referrers. I am performing multiple In Lists to get to level 3 of the pyramid as you can see by running the code below.
I would like if this is the best way to refer to these folks down on level 3 and is there a better way to go down the levels.
Any help would be greatly appreciated. Thanks.
Here is my code:
-- Make the Table CREATE TABLE [dbo].[x_Test__Member_Refer]( [ID] [int] IDENTITY(1,1) NOT NULL, [CustomerID] [int] NOT NULL, [MemberID] [int] NOT NULL, [dtmTimeStamp] [datetime] NOT NULL CONSTRAINT [DF_MemberRefer_dtmTimeStamp] DEFAULT (getdate()), CONSTRAINT [PK_Member_Refer] PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
-- Add some Data Insert Into x_Test__Member_Refer ( CustomerID, MemberID ) Values ( 59108, 59107 )
-- Run our Queries Select * From x_Test__Member_Refer
-- Set Top Member Declare @MemberID int Set @MemberID = 59107
-- Select Level 1 Select * From dbo.x_Test__Member_Refer Where MemberID = @MemberID
-- Select Level 2 Select * From dbo.x_Test__Member_Refer mr Where MemberID In ( Select CustomerID From dbo.x_Test__Member_Refer Where MemberID = @MemberID ) -- Select Level 3 Select * From dbo.x_Test__Member_Refer mr Where MemberID In ( Select CustomerID From dbo.x_Test__Member_Refer Where MemberID In ( Select CustomerID From dbo.x_Test__Member_Refer Where MemberID = @MemberID ) )
-- Clean Up Shop! Drop Table x_Test__Member_Refer
JBelthoff • Hosts Station is a Professional Asp Hosting Provider › As far as myself... I do this for fun!
I have a group of reports using a shared datasource. Going to the preview of the report works fine in the report designer, but when I try and view it from a browser (deployed on a website), it gives the error:
"An error has occurred during report processing.
Query execution failed for data set 'DataSet1_ticketInfo'.
Failed to parse SQL.[long sql query here]"
If there's a problem with it, I don't get why it works in preview mode. I'm using SQL server 2005.
I just deployed my first interface and below is the error message
failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'EUROPExxx123$'.". End Error Error: 2008-05-09 11:01:13.00 Code: 0xC020801C Source: Load New Data Into TransDat... The package execution fa... The step failed.
The interface is just to copy the data from 1 database to another based on a date. I suspect that i could have missed a step during the deployment, can someone tell me if the error is caused me forgetting to configure something during the step up of the job or is it network related
I am trying to design package which would copy all tables and stored procedures from one server to another. It used to be simple task in SQL 2000, there was wizard. However the new wizard does not work...
I wrote SSIS package, but when I execute I get the following error: "Can not apply value null to property Login..."
Any idea? It seems to me that this new SQl2005 is not that simple to use like 2000. 2000 was a great product. I am considering to rollback to 2000. Very frustrated with the new one...
The below query should produce all those customers who are in 'orginalerrorfiles' but not in 'hopefullyworks2'. 3 fields will be used as the check to make sure that the rows, that r identical won't be displayed but those that r different will be displayed.
Instead of doing that it just display everything in the table called 'orginalerrorfiles'.
Note 'orginalerrorfiles' consist of 141455 rows 'hopefullyworks2' consist of 134784 rows
select o.card_no ,o.ref_no ,o.tran_val
from OriginalErrorFiles o
where exists (select h.card_no ,h.ref_no ,h.tran_val from hopefullyworks2 h where( h.card_no = o.card_no and h.ref_no=o.ref_no and h.tran_val = o.tran_val ))
I need to change a display value for a database field when its value is NULL, Exampl I wrote the query like this CASE MyTable.MyFiled When 'IS NOT NULL' THEN ' ' Else MyTable.MyFiled END But it works well in sql query screen, but not in Sql panel, can any one help me. Thank you
I created the an assembly and stored procedure using the following steps:
sp_configure 'clr enabled', 1 GO RECONFIGURE GO
alter database TEST set trustworthy on
CREATE ASSEMBLY ClrWebServices FROM 'D:Dataclr_4.dll' WITH PERMISSION_SET = UNSAFE; GO
CREATE ASSEMBLY [ClrWebServices.XmlSerializers] FROM 'D:Dataclr_4.XmlSerializers.dll' WITH PERMISSION_SET = SAFE; GO
CREATE PROCEDURE InsertLocation(@city nvarchar(200), @state nvarchar(200), @country nvarchar(200)) AS EXTERNAL NAME ClrWebServices.StoredProcedures.clr_4 GO
After this when i am trying to execute the procedure InsertLocation
EXEC InsertLocation 'Sarasota','Florida','USA'
I am getting the following exception..
Msg 6522, Level 16, State 1, Procedure InsertLocation, Line 0 A .NET Framework error occurred during execution of user-defined routine or aggregate "InsertLocation": System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it System.Net.Sockets.SocketException: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) System.Net.WebException: at System.Net.HttpWebRequest.GetRequestStream() at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at ClrWebServices.Test.TerraService.GetPlaceFacts(Place place) at StoredProcedures.GetLocationImage(SqlString city, SqlString state, SqlString country) at StoredProcedures.clr_4(SqlString city, SqlString state, SqlString country)
I searched in the google and found one answer in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=76222&SiteID=1 suggesting use
ALTER ASSEMBLY ClrWebServices WITH PERMISSION_SET=EXTERNAL_ACCESS
when i executed i got the exception
Msg 6213, Level 16, State 1, Line 1 ALTER ASSEMBLY failed because method "add_ConvertLonLatPtToNearestPlaceCompleted" on type "ClrWebServices.Test.TerraService" in external_access assembly "clr_4" has a synchronized attribute. Explicit synchronization is not allowed in external_access assemblies.
I have a job that executes an ssis package. The SSIS package executes successfully in business intelligence Studio however when I make it into a job I get the error message in the topic title. The log file isnt any more helpful which simply says "The package execution failed. The step failed."
I have several reports that are working great on my report server. However, one of my reports "ReportB" is launched as a hyperlink from "ReportA" through the use of a custom function which uses a little javascript to simply open a new browser to the URL of ReportB along with passing a parateter through that URL. I can get it all to work great on my local machine I'm using for development. But when I deploy it to my production server I get the following problems (Please note ReportA works fine, it is ReportB that gives me these problems):
1. When running report in web browser on my local machine - An error has occurred during report processing. Query execution failed for data set 'FDQW'. For more information about this error navigate to the report server on the local machine, or enable remote errors.
2. When running the report in a web browser on the report server itself (also is the SQL server containing the data) - An error has occurred during report processing. Query execution failed for data set 'FDQW'. Must declare the scalar variable "@DocNo".
Like I said above... when I deploy to my local RS on my development machine I get neither of the above problems. I have tried changing SQL roles, RS Execution accounts, database connection credentials, all kinds of permission realated things and can't get it to work.
I am not using a stored procedure as a data source. Here is a copy of my data set query if it helps:
SELECT DocumentHeaders.DocNo, DocumentHeaders.SoldToCompany, DocumentHeaders.SoldToContact, DocumentHeaders.SalesRep, DocumentHeaders.DocName, DocumentHeaders.DocDate, DocumentHeaders.GrandTotal, DocumentItems.LineNumber, DocumentItems.Description, DocumentItems.QtyTotal, DocumentItems.ExtendedPrice FROM DocumentHeaders INNER JOIN DocumentItems ON DocumentHeaders.ID = DocumentItems.DocID WHERE (DocumentHeaders.DocNo = @DocNo) AND (LEN(CONVERT(varchar, DocumentItems.Description)) > 0)
We are using SQL 2005 server for generating reports.When we ran the reports it taking so much time after some time it shows this error:---
ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
When i execute a sql statment, i get this error: System.Data.SqlClient.SqlException: Execution of a full-text operation failed. A clause of the query contained only ignored words.
i tryed to execute same statment in sql query analyzer...in analyzer it works, but in .net returns this error. Have anybody any clue how to fix this error? i'm using ms sql database, SqlDataAdapter and datatable.
This is the most frustrating error I've ever encountered.
I can get no more info from sql server besides "server execution failed". It gives this error when starting the snapshot, distribution, and log reader agents.
This server has been working in this configuration for over a year. We made no changes except restarted the server. This is a windows 2003 server with sql server 2000 running all the latest patches and windows updates.
I have various ssis packages which need to schadule through SQL server agent, I manage to schadule those packages but every time SQL server agent execute those packages automaticlly they failed ... I went to package log and it gives error that Step one failed, on the other hand if i execute those packages through "Execute Package Utility", they run without any error ...
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
I got this Error, Query Execution for Dataset 'Source'.
When i try to run a report that is actually a drillthrough from another report. It runs fine in Report Designer, and when i deploy to my Local server. But when i deploy it to my virtual Report Server, I get this error messege. Why is it doing this? and where can i see errors for this type of stuff, so i can figure this out. This uses the same Datasource as the report linked from it. That report works fine, why wont this one? any ideas?
when I try to run a package as Job I receive the following error
Executed as user: SITAsqlserveragent_svc. The package execution failed. The step failed.
Has someone an idea how I can get more detailed information about WHY the job failed? Tha package was created in BIDS and imported into MSDB. Running the package from the Integration Services context menu works, but starting it as a job from SQL Server Agent fails. Any idea or hint what the reason could be or how I can get more information?
I have a SSIS package which run well when stand-alone. However it was failed when executed from .NET web application. It just simply return Failure. Code snip below:
Dim packagekgResults As DTSExecResult ......... packagekgResults = package.Execute()
I have a logon trigger on a SQL Server 2008 R2 Express Advanced production database to prevent remote logons. The trigger works fine. When I need to connect via my local machine, remotely, I connect via a VPN, can connect with SSMS and do whatever I need. However, if I use a linked server on my local machine (still connected via VPN), I receive the logon error
Msg 17892, Level 14, State 1, Line 1 Logon failed for login 'sa' due to trigger execution.
The trigger is below and it logs any failures, except for the linked server.
If I disable the trigger, the linked server connects ok.
CREATE TRIGGER [tr_MasterLogon] ON ALL SERVER WITH EXECUTE AS 'sa' FOR LOGON AS BEGIN DECLARE @ClientAddress varchar(48) = (SELECT client_net_address
Hello, I've configured SQL Server 2000 for merge replication and am trying to start the snapshot agent for the publication and after about 20 minutes of it trying to start, it gives up with this error.
Server execution failed
There is no more information in the event viewer. I've tried it with a bunch of different subscriptions. SQL Server and SQL Agent are running under a local account which has access to the replcation data directory. SQL Agent is running.
I'm trying to get some proof of concept reports made for a MOSS / SQL Server 2005 (sp2) Integrated solution. I have a simple report that displays everything in the 'incident' uploaded to the MOSS server, and it works fine.
I've made another report that uses a line chart to plot some averages. This report, called 'Average Control Time by Weekday' works 100% ok in VS2005 preview mode and both reports use the same datasource. The report is uploaded and the dataset is all linked up.
When I view the report (by clicking on it's link on my Sharepoint Site), however, I get an error:
An error has occurred during report processing.
Query execution failed for data set 'DataSource1'.
Invalid object name 'incident'.
I've checked the SQL that was run in the SQL Server Profiler to see what transactions were hitting the database. The query that the report makes when in VS2005 Preview mode is precicely the same as what Sharepoint makes when it tries to render the report.
I made another plain report (just a table view) that uses the same query as the 'Average Control' report and tested it on Sharepoint, and it works perfectly. Any ideas?
p.s. I even asked I-God (http://www.titane.ca/concordia/dfar251/igod/main.html) all he said was that I would need a court order to get rid of the recursion in AIML... and then asked for my credit card number.
