Hello,
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
What can I do to restart the SQL
Thanks
Hello,
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
What can I do to restart the SQL
Thanks
Hello,
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
What can I do to restart the SQL
Thanks
Hi,
I am running SQL Server Enterprise manager. I was able to connected to the database properly. But after restarting the PC I am getting the following error.
"System.NullReferenceException: Object reference not set to an instance of an object"
The following event where logged in event viewer.
under security: 560, 562, 538, 528.
under system: 7035, 7036
could anbody give hint how to solve this issue?
We are running SQL Server 2014 Web Edition (64-bit). On three occasions now we have had two of our live secondary log shipping databases become unusable through the log shipping process. We ship logs to these databases every five minutes, and generally the process works fine. However, on three occasions in as many months we have suddenly received alerts warning us that the transaction log restores could not be performed on the secondary databases. The SQL Server Error Log revealed the following:
Date,Source,Severity,Message
10/13/2015 04:01:16,spid52,Unknown,Setting database option SINGLE_USER to ON for database 'ObfuscatedName'.
10/13/2015 04:01:17,spid52,Unknown,Starting up database 'ObfuscatedName'.
10/13/2015 04:01:17,spid52,Unknown,Recovery is writing a checkpoint in database 'ObfuscatedName' (8). This is an informational message only.
[code].....
An error occurred during recovery, preventing the database 'ObfuscatedName' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support."
The extract above shows two previously successful restores to the secondary database. Suddenly, at 04:11:16, the database can no longer be started up or restored to. This is despite CHECKDB giving a clean bill of health only five minutes earlier. The result is that the last three lines are then repeated ad infinitum.
The only way we have managed to get around this issue so far is to replace the secondary database with a recent backup of the primary. Once this is in place, any outstanding transaction logs are successfully applied when the log shipping restore job next runs. However, this seems rather drastic.It is rather concerning that our warm-standby databases continue to become corrupted without any apparent explanation from SQL Server.
Why does Error log show database restarting everytime a transactionlog backup runs?It also runs a checkdb as well.The log backups are scheduled through a maintenance plan.Is this normal?
View 1 Replies View RelatedSystem.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
We have a couple of MS SQL Server 2000/2005 databases with a bunch of..NET clients written in C#, but may want to replace the dbserver withpostgres instead. The clients will still run on Windows, hopefully withas few changes as possible.We don't have any stored procedures or triggers, so all we need to portare the tables/index definitions.What are the most common issues/problems people run into on the clientside? My guesses are stuff like- identity columns- transaction handling(autocommited vs. implicit)- date and datetime- general error handling and error codesAnything else?I've googled for migration guides and howto's, but without success.Pointers to such are appreciated.Boa
View 1 Replies View RelatedWhat is the correct order:
Should it be:
Master
Model
MSDB
Tempdb
I understand that the model should be before the MSDB database but as for master and tempdb I don't know the order.
Thanks
Lystra
I've been given the task of moving data from an old system to a new one. That's easy enough apart from some of the data fields do not match in the least:
Example: In the old system (tableOld) there is a field that contains text data such as 'Laboratory','Field','Market','Demo','Development', but this one field could contain one or more of these. In the new system (tableNew) there are boolean fields for each of the above.
What I need is a way to check for these and then make sure the correct field(s) gets ticked (1 entered into the field) in the new system.
Any suggestions, just trying to get my head around SSIS.
Thanks for any help provided.
Is this possible? If so, how is it done?
View 1 Replies View Relatedwhenever we are moving system databases from one drive to another, do we need to move the path physically? or it automatically moves.I want to try the rebuild the sql server. So I want to corrupt the master database so, I deleted the master mdf file and restore it back but instead of database corruption it is giving the following error message. How can I corrupt the master database and can practice the rebuild the server.
And one more thing when I try to use the repair option I couldn't able to get all the things back to normal. The database engine service, replication is not working but SSAS, SSRS things are showing successfully repaired.
2014-01-10 21:34:26.44 Server Error: 26055, Severity: 16, State: 1.
2014-01-10 21:34:26.44 Server The SQL Server failed to initialize VIA support library [QLVipl.dll]. This normally indicates the VIA support library does not exist or is corrupted. Please repair or disable the VIA network protocol. Error: 0x7e.
2014-01-10 21:34:26.44 Server Error: 17182, Severity: 16, State: 1.
2014-01-10 21:34:26.44 Server TDSSNIClient initialization failed with error 0x7e, status code 0x60. Reason: Unable to initialize the VIA listener. The specified module could not be found.
[code]....
I am in the process of moving my system databases to another volume. I have accommplished the first section pertaining to master database.
I have reached step 3 in the Resource database move section down below.
It states to change the FILENAME path to match the new location of the master database. Do not change the name of the database or the file names.
ALTER DATABASE mssqlsystemresource
MODIFY FILE (NAME=data, FILENAME= 'new_path_of_mastermssqlsystemresource.mdf');
I changed the query to point ot the new location of the master, (E:MSSQLData)
ALTER DATABASE mssqlsystemresource
MODIFY FILE (NAME=data, FILENAME= E:MSSQLDatamssqlsystemresource.mdf');
I get the following error when I run the query:
Could not locate entry in sysdatabases for database mssqlsystemresource. No entry found with that name. Make sure that the name is entered correctly.
What am I doing wrong? My syntax must be incorrect. But I can't figure it. Anybody done this before.
These are the steps per msdn.
****************************************************************************************************************
To move the master database, follow these steps.
1. From the Start menu, point to All Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Configuration Manager.
2. In the SQL Server 2005 Services node, right-click the SQL Server (MSSQLSERVER) service and choose Properties.
3. In the SQL Server (MSSQLSERVER) Properties dialog box, click the Advanced tab.
4. Edit the startup parameters values to point to the planned location for the master database data and log files and click Apply. Moving the error log file is optional.
The parameter value for the data file must follow the -d parameter and the value for the log file must follow the -l parameter. The following example shows the parameter values for the default location of the master data and log files.
-dC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf;-eC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG;-lC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
If the planned relocation for the master data file is E:SQLData and the planned relocation for the log file is F:SQLLog, the parameter values would be changed as follows:
-dE:SQLDatamaster.mdf;-eC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG;-lF:SQLLogmastlog.ldf
5. Stop the MSSQLSERVER service.
6. Physically move the files to the new location.
7. Restart the MSSQLSERVER service.
8. Verify the file change.
SELECT name, physical_name, state_desc
FROM sys.master_files
WHERE database_id = DB_ID('master');
********************************************************************************************
To move the Resource database, follow these steps.
1. Stop the MSSQLSERVER service if it is started.
2. Start the service in minimal mode. To do this, at the command prompt, enter <SQLPath>innsqlservr -c -f -T3608 where <SQLPath> is the path for the instance of ssNoVersion. For example, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL. This will start the instance of ssNoVersion for master-only recovery.
3. Run these queries. Change the FILENAME path to match the new location of the master database. Do not change the name of the database or the file names.
ALTER DATABASE mssqlsystemresource MODIFY FILE (NAME=data, FILENAME= 'new_path_of_mastermssqlsystemresource.mdf');
ALTER DATABASE mssqlsystemresource MODIFY FILE (NAME=log, FILENAME= 'new_path_of_mastermssqlsystemresource.ldf');
4. Make sure the Resource database is set to read-only by running this query:
ALTER DATABASE mssqlsystemresource SET READ_ONLY;
5. Physically move the files to the new location.
6. Restart the MSSQLSERVER service.
I think one of my system database files is corrupted. I did an alter database... to move my Model and MSDB and now I can only start the instance with /f /t3608
I can connect to the instance but I can't do anything I get an error that one of the database files does not match it's primary file.. I don't know if it's MSDB or MODEL but I pretty much can't do anything.
I made a backup of model and msdb before I started.. how do I go about restoring them?
Hi all,
Iam reading this forum from some time but its my first post here
Today i found by accictend this really nice PDF poster with SQL 2005 internal System Tables and thought that maybe someone here will be interested having it.
Poster is really huge, just like db schema on it ;)
But ok no more words, just grab it from here if You want http://rapidshare.com/files/79265626/sql.2005.sys.tables.pdf
Regards, Tom
PS.
1. If You can't read PDF after download with FireFox (like me) turn off pdf plugin and then download starts normally
2. If someone from admins think that its not good forum for this post pleas move it to somewhere that it best fits.
Followed this article to move my model and msdb databes but I think I messed up. http://msdn.microsoft.com/en-us/library/ms345408.aspx
The instance will not start because it says one of the files does not match it's primary file (not sure if it's model or msdb)
I can bring the instance up in single user mode (NET START mssqlserver /f /t3608) but when I try to do a query to re-do my alter statements, it says i can't attach because only one seesion is allowed. in 2000 i used to be able to start query analyzer without starting enterprise manager..
When i try and start with a minimal config (sqlservr -c -m) it won't start. I get an error saying that one of my files does not match it's primary file (either model or msbd don't know which) any ideas????????
Hi
Today I have task to move all UDB's including matser,msdb form Windows 2000 server to Windows 2003 Advacned Server with 64bit(8 Hours Down time)
Present Plan
1.Install same Version of SQL Server in Destination Server
2.Take all Databases Backup
2.Move DTS,JOB and Scripts with same location
3.Stop both servers SQL Server's
4.Deattch all Databses and Move to Destination Server
5.Place all Databases(Same Loaction i.e Soruce Server master DB is C:<folders>.. Place in Destination Server C:<folder>..)
6.Start the Databse Servers(Destination)
7.Port the Apllication and Test.
Note:for our project we are using windows users,so that no problem with Orphan users.
Please some body Advice me, or suggest me
..it is ok
Dear All,
I m using mssql server 2005, when i create a user account for mssql and then use this account to login via management studio. It will show all the system databases and other client databases. How can i hide those databases and allow the client to see their own databases.
Regards,
Ricky
I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename. After the server wouldn't start I checked my script and noticed my error. I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd.
Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time). I also tried using the dedicated Admin connection but I got the same error. Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all). Is there an easy way to fix this mess without having to reinstall from the setup application?
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedHello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
While attempting to set up sql replication in MSSQL 2005 one of my user databases is now in the systems database folder. I need to move it back to the user databases folder. Any help would be greatly appreciated.
View 16 Replies View RelatedI have the following directories
\servershare
\serversharearchvie
I have a for each file loop and inside it a data flow that pulls from one of the flat files in the directory and then a file system task. If I choose the "Move File" option in the file system task to move the file to the archive directory, it fails with an access denied message. The access denied message occurs after a message saying file was successfully deleted. I am running this from BIDS right now and my local user can write delete etc in both the above directories. However, if I do a "copy file" in the file system task it seems to work. I think what is happening is it is deleting the file first and then trying to move it, but it no longer exists because it has been deleted--is this possible? Is this a bug of some sort?
For now I am going to workaround by putting in another file system task that deletes the files after they were copied and see how that goes, but would prefer just to do the "move" option.
Thanks,
Kayda
I have a File System Task that uses variables to resolve the destination and source paths of a document. When I select the 'copyfile' operation...the document is copied from the source to the destination without error.
However when I change the property from 'copyfile' to 'movefile' I get an error and the document is not moved.
The source and destination variables contain a valid file path name since the copy commmand is working as expected. However when I alter the properties of the File System task to move the document. I get the following error:
Could not find a part of the path 'G:CommonInformation SystemsDropFilesrtNRT_ConfirmationOrder Confirmation Report_11062006.xlsOrder Confirmation Report_11062006.xls
It seems a little nonsensical since the document file paths are valid when performing a copy. For some reason the error log is showing that that the file path is the document name "Order Confirmation Report_11062006.xls" and adding it twice to the the directory path called "'G:CommonInformation SystemsDropFilesrtNRT_Confirmation" as you can see in the above error message.
To replicate the 'move' action...I added an extra File System Task that deletes the document once the copy has been performed. I would like some insight into why this doesn't seem to work.
Thank you.
...cordell...
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies View RelatedI have a problem where developers will stop the SQLServer service during the day and then they will not remember to restart the SQLAgent. It does not seem to restart when you stop the Server service and restart the services with out a reboot. Is there a setting somewhere in Enterprise Manager where I can tell the Agent service to restart with the Service service?
View 4 Replies View Relatedmy VS 2005 keeps on restarting even if im executing a small query only. what could be causing this?
View 2 Replies View Relatedhello
i have a question regarding sql agent. Is it ok to restart the agent any time (i need to restart it for enabling the email alert option in sql agent properties..otherwise it doesnt work)? Does restarting sql agent affect replication jobs and other scheduled jobs? Are there any issues restarting agent on production?
Any help appreciated
Thanks
If SQL is restarted for any reason, I need SQL server to send emails to others letting them know that the server is has restarted once it comes back up.
Is there an Error # that I can build an Alert on? Ideas???
Thank you,
tw
Why does restarting my server improve SQL's performance so dramatically? What can I do to achieve the same effect, without restarting? Thanks for any ideas.
View 8 Replies View Related