1) I have data coming in from flat file everyday.On failure I would require Error Table to be updated with problematic rows.Otherwise rows would be updated to a Staging Table.Problem is I have been asked to also return the row number for the problematic rows, so that it's easier for the Client to resend failed rows.How do I do this ?
2) I have realize that even if row coming in has some invalid data type in more than 1 column.ErrorColumn, in Error table just return 1 column value.Is this how it works? OR is there a way for it to return the Error_Column for the other Column's as well.
I have been struggling with this since last week.Do help me out.
I'm creating 1 package to transfer the data to destination table(D) and where all the error recodrs are transfered to a Error Table(E). Now some of the error records are corrected. Now i want to create a package that will transfer the corrected records to destination table (D) and also delete the corrected records from Error table E. how to do it?
Below is the error, Thanks!! [Data Conversion 1 [157]] Error: Data conversion failed while converting column "Media Type" (89) to column "Media Type" (201). The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Data Conversion 1 [157]] Error: The "output column "Media Type" (201)" failed because truncation occurred, and the truncation row disposition on "output column "Media Type" (201)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Data Conversion 1" (157) failed with error code 0xC020902A. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - Test" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
I'm importing data from Navision 3.70A Database (not MS SQL Server) with SSIS and data reader via odbc.
Works perfect until I try to import a table which has a column including cells with | (pipe symbol) and .. (dots) between numbers.
8420|8421|8430|8431
8900..8944
the error message from data reader: [get sachkonto [5165]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "get sachkonto" (5165)" failed because error code 0x80004003 occurred, and the error row disposition on "output column "Zusammenzählung" (8265)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
No error message exist before this message.
Is there an option to allow or a workaround? Maybe a replace function in the sql command can help but I have no sql manual for the native database of navision. Can somebody help with an example of a query?
I can read this table with Excel via ODBC without problems ...
I am attempting to run an SSIS package that, among other things, imports a spreadsheet from excel into a database table. The package runs without any issues within Visual Studio. I have tried executing the package through both, the MSDB run package and through dtexec (trying to kick of the package through a stored procedure) and I get 2 different behaviors.
Using dtexec (the method I really need to use): The package will run successfully...up to the point when the spreadsheet is imported at which time it fails with Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. Here is the code:
Running it through the MSDB Run Package UI...It will also make it up to the point where the Excel spreadsheet is imported but errors with: The Product level is insufficient for the component "Lookup Station and Account Type: (1894) ...and 1 line with that same error for every single task in that dataflow. Here is the code it runs.
/DTS "MSDBPopulateTRTLStationandtRTLUnitMapping" /SERVER "SERVERNAME" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
The machine is running 32 bit OS Windows Server 2003 SP1 and Db SQL Server 2005 32 bit. I found one forum posting that suggested turning the Delay Validation property to True...but that did not fix the issue. I did create the package with my username with a ProtectionLevel of EncryptSensitiveWithUserKey. I don't think it is related to the account however because all of the tasks (serveral work tables are created) up to the Excel import will execute.
I really need to get this working as soon as possible so am open to any solutions someone can present.
Hi, I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE. I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that. Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
So i am getting an error on 3rd step. While i am trying to push it says, "The Push method returned one or more error rows. See the specified error table. [ Error table name = ]". I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.". Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
I recently joined a company that is having an issue connecting to SQL Server Integration Services on one of their production servers. When trying to connect via management studio, both locally and remotely, they receive the error below. The server is a 64 bit server and is using third party replication (Veritas).
It sort of sounds like the issue described in this knowledge base article: http://support.microsoft.com/kb/919224. However, we do not have a problem creating maintenance plans. I'd just give it a shot but its a production server and getting approval to do anything that modifies the registry with the registry replication setup is a pain, so I'd like to determine if there could be another cause first.
TITLE: Connect to Server ------------------------------
Hello, Maybe anyone have done that before? I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables. i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.
I made such SSIS package. set ole db source data access mode to table or view name variable. set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables) but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.
Hi, Is this anyway to finding updated/ deleted recored using anyother data flow transformation tasks without using sql task. Can find the new records using merge join task.
Is there better way to merge master table using staging table?
I have a 2010 SSIS package where I am reading csv files with different fields and formatted data, I have created separate packages for each file and I am formatting the data to fit the final destination tables data elements, I've been instructed to create 7 separate packages to read each file and the format the data from the 7 csv files, and insert into their table tbl1, tbl2, tbl3...etc then, I'm taking a execute sql task and wanting to insert the tbl1, tbl2, tbl3...etc into destination table that will be the final table for all reports and other uses.
1- should I create a ID? 2- these files will be read once a month 3- I want to append the data, not drop and recreate each run, 4- It's 2012 SQL and 2010 SSIS
Each csv file is in a different format, some have 15 columns, other have 8 I have to parse the data, in SP to align with the fields in the destination table.
5- Can I force RowID to be the next auto gen number from tbl1,for the start of insert for tbl2, then last row of tbl2 for insert of tbl3???
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I click on menu item SSIS and enable logging to my SQL Database (SSIS log provider for SQL Server). When I run the package it runs fine for the first time. Upon subsequent runs I get the following error.
[Log provider "SSIS log provider for SQL Server"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "There is already an object named 'sysdtslog90' in the database.".
It seems like I need to drop the table every time to avoid this error. Is there a way I can log all package logs to single table historically? Any weblink or tip is appreciated.
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--/////////////////////////// USE MyDatabase GO CREATE TABLE dbo.LabResults (SampleID int PRIMARY KEY NOT NULL, SampleName varchar(25) NOT NULL, AnalyteName varchar(25) NOT NULL, Concentration decimal(6.2) NULL) GO --Inserting data into a table INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration) VALUES (1, 'MW2', 'Acetone', 1.00) VALUES (2, 'MW2', 'Dichloroethene', 1.00) VALUES (3, 'MW2', 'Trichloroethene', 20.00) VALUES (4, 'MW2', 'Chloroform', 1.00) VALUES (5, 'MW2', 'Methylene Chloride', 1.00) VALUES (6, 'MW6S', 'Acetone', 1.00) VALUES (7, 'MW6S', 'Dichloroethene', 1.00) VALUES (8, 'MW6S', 'Trichloroethene', 1.00) VALUES (9, 'MW6S', 'Chloroform', 1.00) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00 VALUES (11, 'MW7', 'Acetone', 1.00) VALUES (12, 'MW7', 'Dichloroethene', 1.00) VALUES (13, 'MW7', 'Trichloroethene', 1.00) VALUES (14, 'MW7', 'Chloroform', 1.00) VALUES (15, 'MW7', 'Methylene Chloride', 1.00 VALUES (16, 'TripBlank', 'Acetone', 1.00) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00) VALUES (19, 'TripBlank', 'Chloroform', 0.76) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51) GO //////////Parse/////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'. ////////////////Execute//////////////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'.
But now I am getting error "General Network Error. Check your network documentation" after specifying Use existing stored procedure in TableAdpater Configuration Wizard.
ALTER PROCEDURE dbo.Insert_MailSignature( @Singnature image )
AS
SET NOCOUNT OFF;
INSERT INTO MailsSignature (Singnature) VALUES (@Singnature);
SELECT Id, Singnature FROM MailsSignature WHERE (Id = SCOPE_IDENTITY())
For testing I created a desktop application and found that the same Code, same(Use existing stored procedure in TableAdpater Configuration Wizard) and same stored procedure is working fine in inserting image into the table.
ALTER TABLE [dbo].[CalCalendar] ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY NONCLUSTERED
is answered with:
Server: Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'PRIMARY'.
which I consider to be interesting. Anyone has an idea why? I checked documentation but I do not see an error.
Note that:
ALTER TABLE [dbo].[CalCalendar] ALTER COLUMN [OID] uniqueidentifier NOT NULL
DOES get executed, and
ALTER TABLE [dbo].[CalCalendar] ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY
produces the same error.
Now, in my understanding this has nothing to do with an index may already exist etc. - the eror indicates a SYNTAX error, before any checking. Makes no sense to me, though, reading the documentation.
This is the error that I got. Is it a Resevered Table name or something Invalid column name 'LastLoginDate'.Invalid column name 'LastLoginDate'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Invalid column name 'LastLoginDate'.Invalid column name 'LastLoginDate'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
I have created a package that insert data from Iseries table to SQL 2005 database.
I am using Microsoft OLE DB provider for DB2 and Native OLEDB for SQL2005 database as connector.
I am getting following errors:
[OLE DB Source [1]] Error: There was an error with output column "ACCOUNTID" (32) on output "OLE DB Source Output" (11). The column status returned was: "The value could not be converted because of a potential loss of data.".
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "ACCOUNTID" (32)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "ACCOUNTID" (32)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
hi, iam fairly new at running ssis packages.i have created a ssis package in sql server business intelligence dev. studio. iam running a simple package of file system task where ontents of one file are bieng copied to another on the same machine. the package runs successfully when i run it manually.but when i run it as a job it dosent run i checked the log and got this message
Executed as user: LEGALsvc-leglngdaysql002. ...42.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:52:00 AM Error: 2008-02-22 02:52:01.22 Code: 0xC0011007 Source: {83F3BF45-5E11-4164-835F-DDB92207603B} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2008-02-22 02:52:01.22 Code: 0xC0011002 Source: {83F3BF45-5E11-4164-835F-DDB92207603B} Description: Failed to open package file "D:Documents and Settingskumarr1My DocumentsVisual Studio 2005ProjectsIntegration Services Project5Integration Services Project5Package.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specifi... The package could not be f... The step failed.
can anyone tell me what it means and what i have to do to resolve this error. all help is aprreciated.
i have written an ssis package that is designed to do the following:
1. load a list of servers from a management sql server table
2. store this into an ADO recordset
3. hand the ADO recordset off to a child package that in turn will
4. dymanically grab servernames and execute a WMI task to query the win23_logicaldisk table and store this in a dataset
5. dataset is handed to a for each loop and a data insert is made back to a management server table
The reason for the Child package is that it was one of the suggestions that I found on forum discussions to resolve the problem that I am still facing. I am recieving an error of "RPC server not available" when dymanically assign the servername to the connection string property of the WMI connection using an expression.
Error: 0xC002F304 at WMI Data Reader Task, WMI Data Reader Task: An error occurred with the following error message: "The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)".
I have researched this extensively and have verified that connectivity and communications are open, the rpc, rpc locator and wmi services are running. I even receive this meessage when executing this code against my local machine that is running the ssis package!
Any insight would be greatly appreciated in resolving this.
I encountered these errors after running the SSIS package. A command line triggers a batch file in a batch server that runs the package in a seperate server. Kindly assist me on this.
Code: 0xC0202009 Source: <Package name> Connection manager "<server path>" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ". End Error Error: Code: 0xC00291EC Source: On Error Execute SQL Task Description: Failed to acquire connection "<server path>".Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: Code: 0x80019002 Source: OnError Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1).
Hi, I'm getting the following error while loading data from flat file to SQL server tables.I'm using OLE Db destination. Can anyone tell me what might be the reason?
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
I encounter a serious problem when I execute dtsx package in 64bit SQL2005. I try to run dtexec command together with the file name , and its return error below: €œFailed to decrypt protected XML note €œDTS:Password€? with error 0x8009000B€? Key not valid for use in specified stateI found the problem is cause by SQL2005 Proctection level in SSIS, then i use dtutil to encrypt the password, but i still cannot run the DTS in 64bit SQL2005
We are using IBM iseries OLE DB provider and once we make a source connection using the same we get an error saying that the "Default Code Page" property is not defined and a default code page will be used.
