I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
I have a problem retrieving data from a linked SQL Server 6.5 server in version 7. I have set-up the server as a linked server and most operations occur with no problem. With some tables, though, I get the following error when I attempt to query any column of data:
Server: Msg 7356, Level 16, State 1, Line 1 OLE DB provider 'SQLOLEDB' supplied inconsistent metadata for a column. Metadata information was changed at execution time.
This occurs consistently for a subset of tables. I cannot see any pattern to the configuration of these tables that would make them any different to those where a query succeeds.
I am running a SQL2K on a Server2K box. I have linked servers to SQL2005 Express on WinXP. I am trying to get data off of the SQL2005 DB to the central DB on SQL2K. This has been running for about a year. I am now getting an error message as follows:
Server: Msg 7356, Level 16, State 1, Line 1 OLE DB provider 'SQLNCLI' supplied inconsistent metadata for a column. Metadata information was changed at execution time. OLE DB error trace [Non-interface error: Column 'TestVarChar' (compile-time ordinal 2) of object '"WKS"."DBo"."testtable"' was reported to have changed. The exact nature of the change is unknown].
When I run the following Queries on the SQL2K box: SELECT * from WKSA400.WKS.DBo.testtable
or
SELECT * from OPENQUERY(WKSA400, 'SELECT * from WKS.DBO.testtable')
I did notice that if my testtable has only numeric fields, it works fine. It only has a problem with alphanumeric fields.
If I run 'exec sp_tables_ex WKSA400' on the SQL2K, it works fine. I get a listing of all the tables on the remote server. This tells me that my security is fine. It seems to be a conversion from the 2005 to 2000 SQL. If it had not been working for over a year, the dent in the wall the size of my head would be much smaller.
I'm having a tad bit of trouble getting output from an asynchronous component that I've written and am looking for some insight.
This component takes in a name string passed from upstream and parses the name components into standardized output fields. I'm using an asynchronous component because if the name string contains two names ("Fred & Wilma Flintstone") I'm outputting one row for Fred and one for Wilma. I've gotten it to run and with debugging have observed what appeared to me to be proper execution, but zero rows are flowing out of it.
In my ProvideComponentProperties method, I add the three fields and there associated metadata to the OutputColumnCollection. Is this method where this should occur? It's before the PrimeOutput method, so I didn't know if I should be creating the output columns in ProcessInput (i.e., after the output buffer is provided by PrimeOutput.)
In ProcessInput, I'm using AddRow for each input row and another if it contains a second name, setting the value for each index using the buffer's SetString method, to no avail. I can observe it to this point, but then don't know what's in that output buffer (if I'm using the wrong buffer index value, etc)
I get an error every so often with a DTS package on SQL 7. Error asfollows.The connection is currently being used by a task. The connectioncannot beclosed or re-used.This doesn't happen all the time and I can sometimes (more often thannot) get the DTS package to complete in it's entirety.To explain what the DTS package does...Truncate tables in reporting environment(several in a batch)Clear Transaction LogsCopies data from live environment into CSV (for speed)Copies data from CSV files into tables previously truncated.Builds up a table based on the data copied (for reporting)Clear Transaction logsI'm using a pretty basic set up, Connection (1st DB) -> Transformationto CSV -> Transformation to Connection (2nd DB). It seems to fail oneither the first or second transformation at random (?).I've checked the transformations so that they close the connectionafterwards so it should in theory be releasing the CSV files for thenext step. I suspect that there is a timing issue with this. I cancopy the CSV files over, but this is a little sloppy and I wouldprefer not to do it.Any ideas how to find a tidy way to ensure these are closed bothbefore and afterwards ?ThanksRyan
I keep getting the following error in SSIS. Also, I don't get the error on every server the package is run on, but less than 5 (the package is run on over 100).
"The external metadata column collection is out of synchronization with the data source columns. The column "Timestamp" needs to be added to the external metadata column collection"
Please tell me where I need to remove Timestamp from. Thanks
IÂ setup merge replication about 3 weeks ago between a few databases all running SQL 2008 SP1:
DB1 - This database is the publisher and distributor. DB2 - This database is a write-only subscriber (-EXCHANGETYPE 1) to DB1. DB3 - This database is a write-only subscriber (-EXCHANGETYPE 1) to DB1. DB4 - This database is a write-only subscriber (-EXCHANGETYPE 1) to DB1. DB5 - This database is a read-only subscriber (-EXCHANGETYPE 2) to DB1. DB6 - This database is a read-only subscriber (-EXCHANGETYPE 2) to DB1.
Everything was running fine, then suddenly one at a time the replication jobs for DB2, DB3, and DB4 all started reporting the error:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Publisher for changes not yet sent to the Subscriber. You must reinitialize the subscription (without upload). (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199402)
I was able to manually upload data from DB2, DB3, and DB4 to DB1 then reinitialize the subscriptions. However, I don't understand why only those three subscriptions failed. I have other merge replication jobs between the same SQL instances that are still running fine. The only unique thing I can determine about the failed subscriptions is that they are write-only. I really don't want to make them read/write, as it would cause a lot of unnecessary network traffic to flow between them.
Based on what I've been able to gather, the subscriptions were marked as expired which caused this problem. If I change subscriptions to never expire to get around this problem, is that going to cause my distribution DB to grow unchecked? Are there other ways to solve this problem?
I keep getting the following error in SSIS. Also, I don't get the error on every server the package is run on, but less than 5 (the package is run on over 100).
"The external metadata column collection is out of synchronization with the data source columns. The column "Timestamp" needs to be added to the external metadata column collection"
Please tell me where I need to remove Timestamp from. Thanks -Kyle
I have transferred a database from SQL 2000 to SQL 2005 and now I am getting an error when I try to run backup. I get there error "An error occurred while processing 'BackupMetadata' metedata for datase ID..." Does anyone have any suggestions on how to resolve this error?
This has been driving me mad for several days. I have setup SQL Server 2005 Express (SP2) on a box. I have SQL Server Management Studio (9.00.3042.00) installed on a client box. I can connect to the 2005 server and created a test database on the machine. But when I try to open a query on the database, I always get the above error message "[Error loading mining model metadata: Not connected.]" in the LHS pane and the query window remains unconnected. If I try to connect (by clicking on the connect button) I get a login screen for Analysis Services, but I don't have Analysis Services running on any boxes. The login screen doesn't allow me to change anything other than Server Name. This happens even if I open a new Database Engine Query through the File/New menu.
All I want to do to execute a query against my database. I don't want to use Analysis Services. What am I doing wrong? I have almost the exact same setup at home and it works fine.
I'm having an issue running the clustering algorithm in the data mining view of Visual Studio. The databases connect properly and the data subsequently loads. However, upon clicking on the "Mining Model Viewer" tab, I receive the following error message:
Errors in the metadata manager. The D Msample ~MC cube has no measure groups. Errors in the metadata manager. An error occurred when loading the D Msample ~MC cube, from the file, '\?C:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataewDM_sample.0.dbD Msample ~MC.2.cub.xml'.
We are not using a data cube, so I am assuming that this file is being called through the clustering algorithm. Furthermore, I have run the same process on different systems successfully. The only difference I can detect is that this error resulted on a 64bit system.
I have a SSIS package with a Data Flow task. This task transfers the data from SQL Server 2000 to a table in SQL Server 2005.
I deployed and tested this package on the Test Server. Then put this package in a job and executed it - Works fine.
On the production server- If I execute the package through DTEXECUI, it works fine. But when I try executing it through a job- the job fails and it gives me following error:
Description: The external metadata column collection is out of synchronization with the data source columns. The "external metadata column "T_FieldName" (82)" needs to be removed from the external metadata column collection....
What I don't understand is, why are there no errors displayed when I execute the package through DTEXECUI.
I was trying to get my data from olb table to excel. but i got this error my dataflow is as follows: oledb source-> excel destination
i have got a excel file template at the destination all ready. with the column names+ the sheet all ready. but somehow it got stuck... anybody can help? thanks!
I work with February CTP of SqlServer 2008. I have an Assembly with several UDTs inside. Version of assembly is 1.0.* I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version). Then I try to update assembly in SqlServer. I use ALTER ASSEMBLY <name> FROM <path> WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA statement for this. Statement runs with error: Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1. I found the list of condition for ALTER ASSEMBLY in MSDN: ALTER ASSEMBLY statement cannot be used to change the following: · The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly. · The signatures of methods in the assembly that are called from other assemblies. · The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly. · The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly. · The FillRow method name attribute for CLR table-valued functions. · The Accumulate and Terminate method signature for user-defined aggregates. · System assemblies. · Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead. Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes: · Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed. · Adding new public methods. · Modifying private methods in any way.
But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions. What could be the reason for such behavior? P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
hello Jamie actually i am trying to add something using OLE DB Command Component and i am getting this error
[Add Mail Status [8108]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Error in stored procedure <myStoredProcedure>: @fNameStatus must be a GUID for relational fields".
in the stored procedure, the column name accepts a varchar(800) and i am passing a String (3). from the source, the column is nVarchar(255). For some reason, its working for email and all others please HELP --
My process checks values in certain files in a "Source" folder against a table in a database. If these values do not match, those files are moved to a "Fail" folder and if they are validated then they are moved to a "Success" folder. My issue is caused by the fact that these files (which are notepad text files) are not being moved over to the success folder for the following error:
"The process cannot access the file '\Server1c$Source239598.TXT' because it is being used by another process."
I have checked whether these files were actually being used by another process but even cutting off users from the directory and even copied a test file into the folder, the issue will still pop up and for random files.
I've tried using two different components to do the same thing as the "Move" component --- "Copy files from source to destination" and then a separate component "Delete file from Source folder" which is essentially a move. The issue persists on the Delete process because it sees that the file is still being used by some other "imaginary" process it seems to me.
I've tried upping the MaxErrorCount on the Delete and even using the Move components to try to ignore this issue but the package still fails. Are there any other ways to get around this problem?
[Data Conversion [14]] Error: Data conversion failed while converting column "Column1" (99) to column "Column1_Converted" (204). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [14]] Error: The "output column "Column1_Converted" (204)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "Column1_Converted" (204)" specifies failure on error. An error occurred on the specified object of the specified component.
Can anyone tell me which Data Type should I use to convert string into integer.
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2 WHERE T1.DL_CODE = T2.DL_CODE AND T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
I have a Data Flow Task with an OLE DB Source containing this query:
SELECT Batch_Idx, Package, FailureSource FROM Audit.ProcessPackage WHERE (Status = 2) AND (Batch_Idx > ?) and FailureSource IS NOT NULL
At this point, before sending the data to the Recordset Destination, I would like to do a Row Count, and do something different depending on if there are any rows or not. When I try to put in the Row Count after the OLE DB Source, I get this error:
"The component has forbidden the requested use of the input column with lineage id xxx"
My variable for the RowCount results is RowCount and it is declared at package level. I have tried to use all each of the columns as input columns, and I get the error for every one. Do you know how I can fix this error? Thank you!
I have created a package which forms data from flat file to sql database.I have a data flow where all my data is processed to destination.if the package fails by any chance i want an email notification with the cause of the error.how can i do this.please let me know..
I have three script component A,B, C. A reads certain data from a table. B inserts records into a .txt file when the recordtype = 1. C inserts records into same .txt file when the recordtype = 0. Now I receive a script comp error for C as follows.
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at ScriptComponent_6bda9d13fce34f90ac6315546c8d0d54.ScriptMain.PreExecute() in dts://Scripts/ScriptComponent_6bda9d13fce34f90ac6315546c8d0d54/ScriptMain:line 19
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PreExecute()
[Derived Column [192]] Error: Converting an input column from type DT_STR to type DT_WSTR failed. An error occurred while performing the implicit conversion on the input column.
But I don really understand y there is a attempt to type cast at all ?
I've read a MSDN article on enhancing error outputs with a script component. This solution added the script component astride the error output, and it was able to add a column with the error description text.
I would like to do something a little different. I'd like to add information from my custom component. When the component causes an error, it generally "knows why" - it has available to it the information that made it decide there was an error. I'd like to include that information in error outputs, but I haven't seen a way to do that.
Is this even possible using the error output directly? I could abandon error outputs and use Conditional Split, along with an "iserror" column plus my extra columns, but I'd prefer not to do that.
I cannot open my script component in my SSIS package. Not sure if this is the cause, but I originally designed the package in BIDS and now have loaded Visual Studio 2005. Here are all the error messages:
=================================== Cannot show Visual Studio for Applications editor. (Microsoft Visual Studio) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.DataFlowUI.SR&EvtID=CouldNotShowVsaIDE&LinkId=20476 =================================== Engine returned Unknown Error (Microsoft.VisualBasic.Vsa) ------------------------------ Program Location: at Microsoft.VisualBasic.Vsa.VsaEngine.LoadSourceState(IVsaPersistSite Site) at Microsoft.SqlServer.VSAHosting.DesignTime.LoadEngineSource(String engineMoniker, String project) at Microsoft.SqlServer.Dts.Pipeline.ScriptDesignTime.CreateDesignTimeEngine(String projectName, Boolean loadSource, ICodeGenerator codeGenerator) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ShowIDE() at Microsoft.DataTransformationServices.DataFlowUI.ScriptUI.propPage_DesignScript(Object sender, EventArgs args) =================================== A project with the name 'ScriptComponent_96f4738414c440d0b240beb6399cef36' already exists. ------------------------------ Program Location: at Microsoft.Vsa.IVsaEngine.LoadSourceState(IVsaPersistSite site) at Microsoft.VisualBasic.Vsa.VsaEngine.LoadSourceState(IVsaPersistSite Site)
In one of the SSIS package, I have a Script Component with ReadWrite variables --> TotalRecordCount, JobName, CycleCode
But suddenly in our Prod server from where the SSIS package is executed against our Prod DB server (SQL Server 2005 SP2), it failed. The error message was
Error: 2008-04-11 07:31:20.61 Code: 0xC0047062 Source: DFT PolicyTerm Load SCR Balancing [839] Description: System.Runtime.InteropServices.COMException (0xC001404D): Exception from HRESULT: 0xC001404D at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PostExecute() at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPostExecute(IDTSManagedComponentWrapper90 wrapper) End Error
I am attaching the code below here...
Imports System
Imports System.Data
Imports System.Data.OleDb
Imports System.Collections
Imports System.Text
Imports System.Windows.Forms
Imports System.Environment
Public Class ScriptMain
Inherits UserComponent
Public rowCount As Integer
Public Connections As New Connections(Me)
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
