Error: Value Does Not Fall Within The Expected Range. Error In Buffer.DirectRow Method
Oct 10, 2006
Hi
I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.
When i run the task it fails with this error ( I am putting the whole SSIS message)
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------
This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).
int GoodOutputId = -1;
IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);
//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);
GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}
I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.
Please let me know if i have missed something. Thanks in advance.
Vipul
View 1 Replies
ADVERTISEMENT
May 28, 2015
I have a execute sql task which insert data into a table, but before that I need to make sure no data is available for particular date. we have a table where we are defining date for which date we want to data, and we are fetching that particular date using ssis variable 'Date'. today I was trying to load data dor '2015-05-10'. But it gave me error like '[Execute SQL Task] Error: "Value does not fall within the expected range.'. Below are the my execute sql task query:
delete from STG_Shipped_Invoiced
where Transaction_Date=?
INSERT INTO STG_Shipped_Invoiced (div_Code, inv_inv_id, tot_Net_Amt,
trans_date, trans_type, Created_date, Transaction_Date)
select inv.DIV_CODE as Div_Code, inv.INV_ID as inv_inv_id, inv.TOT_NET_AMT as Tot_Net_Amt,
[Code] ....
Here I have defined a variable 'Date', where we are passing the date. Am i doing anything wrong with the delete query?
View 0 Replies
View Related
Jan 18, 2008
I just installed Reporting Services - and installed the sample reports and when I try view any of the individual reports all of them give this message "Value does not fall within the expected range sql reporting services"
I also tried to create my own report, which compiles and I when I try to view it as well in the browser I get the same message.
Thanks for any help.
View 15 Replies
View Related
Jan 30, 2007
Win XP Pro SP2IIS 5.1SQL 2005 SP1 (Developer edition)VS 2005 SP1.Net 2.0IE7 (didn't work on IE 6 either)Latest updates from Windows updateI have set up SSRS successfully on several machines. But on a new machine with standard install I have the out of the box SSRS report manager running with issues and would like to resolve them. Report Manager will serve image files from my project. But it won't render deployed reports, not even one which has no data sources. From within VS 2005 the same reports render, no problems. The same reports published to another SSRS machine render fine.The browser erorr message is "Value does no fall within the expected range".Any ideas? Thanks in advance.
View 3 Replies
View Related
Jul 6, 2006
Hi!
I was just wondering if there are any examples on how to work with the Script Editor, and more specifically how to use the DirectRow method? I've seen some examples that say that the editor automatically creates the methods DirectRowTo<output buffer>, but it doesn't say how that is done. If I just specify Row.DirectRow(output buffer #), it says that the method is protected.
Any help or just pointing me in the right direction would be greatly appreciated!
Thanks!
Jeff Tolman
E&M Electric
jeff.tolman@enm.com
View 4 Replies
View Related
Apr 18, 2012
I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"
View 3 Replies
View Related
Apr 28, 2006
Hi
I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.
There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".
SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).
I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.
Does any one have any idea what happened?
TIA . . . Ed
View 2 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Jan 10, 2008
Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that.
Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
Step : 3 Push From Mobile
Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);
So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
View 7 Replies
View Related
Oct 11, 2007
Hi,
I am trying to convert an active x script in a script task. Below is a snippet of code. The underlined AsOfDate has a blue squiggly line under it and if I hover over it, it says "Declaration Expected."
Public Class ScriptMain
Dim AsOfDate As String
AsOfDate = Dts.Variables("MyDate").Value
...
Can someone please tell me what I'm missing? I thought maybe I'm missing an import statement, but I have:
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
I have used similar syntax in script components and it works fine.
Thanks
View 6 Replies
View Related
Sep 7, 2006
Hi
I have written a custom data flow component that counts the rows coming through the pipeline and adds the counts to an object stored in a package variable.
The component sometimes generates warnings with the following message - "A call to the ProcessInput method for input 358 on component "<Component Name>" (354) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned.".
The component is used several times throughout ~60 packages. It does not always occur on the same instance, or even in the same package, from one occasion to another. When all the packages are executed (from a master package - some in parallel and some in series) the warning is generated several times (around 10), but the warning is not generated at all when the packages are executed individually from BIDS. The values of the refcounts vary from message to message, but the difference is always 1 more after the call than it was before. The server has SP1 and the hotfix package installed, but the warning was being generated before SP1.
I do not understand what could be keeping a reference to the buffer. The ProcessInput method is very basic:
public override void ProcessInput(int inputID, PipelineBuffer buffer)
{
try
{
if (!buffer.EndOfRowset)
{
totalRowCount += buffer.RowCount;
}
}
catch (Exception ex)
{
bool cancel = false;
ComponentMetaData.FireError(0, ComponentMetaData.Name, ex.Message, string.Empty, 0, out cancel);
throw new Exception("Could not process input.", ex);
}
}
Does anyone have any idea what could be causing this, or ideas for things I should be investigating?
TIA . . . Ed
View 5 Replies
View Related
May 1, 2015
Why do I get an error when creating XML schema as follows?
CREATE XML SCHEMA COLLECTION PersonalInfoSchema AS
'<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema elementFormDefault="qualified" xmlns:xsd="http://www.w3.org/2001/xmlSchema">
<xsd:element name="personal">
<xsd:complexType>
<xsd:sequence>
[Code] ....
View 2 Replies
View Related
Oct 7, 2015
how to hard code mention date range in my SP to get expected results in my query 01/01/2012 to 12/31/2012
DECLARE @ACCOUNT AS INT
DECLARE @POSTING_DATE AS DATETIME
DECLARE @FIRST_POSTING_DATE AS DATETIME
SET @POSTING_DATE = {?POSTING_DATE}
SET @ACCOUNT = {?ACCOUNT}
[code]...
View 3 Replies
View Related
Nov 20, 2000
Upon running DTS manually to transfer data from Excel into SQL Server, I
get the error:
-----------------------------ERROR OUPTUT ------------------------------------
Error at Source for Row number 264. Errors encountered so far in this task: 1. General error -2147217887 (80040E21).
Data for source column 3 ('Value') is too large for the specified buffer size.
---------------------------END ERROR OUTPUT----------------------------------
*** 'Value' is varchar(4000); largest having length of 1000.
*** The network packet size is 4096.
?? AM I SUPPOSED TO CHANGE THE BUFFER SIZE??
Your kind help is greatly appreciated
Thanks
Ziggy
View 2 Replies
View Related
Jul 13, 2006
Error: "The specified buffer size is not valid. [buffer size specified = 0]
Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed:
Im working on a c# (.net 2.0) project and loaded data
(one column from one table, 800 rows, text, no greater than 80characters in length)
from an access db into a data set, then lnserted the data in SQLce, great it works fab!
but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error...
what have i missed???
View 3 Replies
View Related
Jul 20, 2005
Does anybody know what might cause the following message to show up inthe SQL Server Error Log?:Time out occurred while waiting for buffer latch type 2, bp0x12260f80, page (5:77914), stat 0x40d, object ID 7:421576540:0,waittime 500. Continuing to wait.I've read several articles about what to do about this situation onSQL Server 2000, but I'm running SQL Server 7.0. Specifically, I'mrunning version 7.00.842. Is there a way to resolve this problemwithout upgrading to some flavor of SQL Server 2000?
View 2 Replies
View Related
Feb 27, 2007
HI ,
Need some quick fix Help
I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )
The files, I€™m trying to load, have
number of rows more then 15 million.
On execution of the package I get
Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4
CPU Box.
There seems to be some Buffer and
Swapping related issue which I€™m not able to figure out. It says that System is
unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE
1.dtsx" starting.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.
An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".
Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.
Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.
Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.
Task failed: ABCDE 2003 to
2004
Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.
Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.
Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.
Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to
2005_11
Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
€¦€¦.
€¦€¦€¦€¦
View 11 Replies
View Related
Jun 22, 2007
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
View 5 Replies
View Related
Jan 11, 2008
Hi Guys,
i've found many threds with SSIS buffer errors but non of them seems to work, or have a good solution. i'l explain the story short.
i've got a DB server running on Windows 2003 R2 Enterprise with 10GB RAM 20GB Virtual memory with same spec another machine for the web server.
both machines have "Lock Memory in memory" group policy enabled for
Network Service
System
DomainSQLServiceAccount (in DB server)
and in the DB memory "awe allocation" is also enabled.
both servers have /PAE /3GB switches enabled in boot.ini file
problem: i run all my SSIS packages in the web server through IIS. so the processes are devided between DB and web server. i.e SSIS service is also running in web server.
when i run packages under load (transforming - 200,000 records) i get buffer allocation errors.
A buffer failed while allocating 10485760 bytes.
Error Code = -1073450990
all packages i run i have set the default buffer temp to my web servers e: emp (got 260GB space left). and defaultbuffer size is 10mb with 10,000 defaultbuffermaxrows.
funny this is when it hit 8.33GB (approx 875 files) i get the above error message. it always seems to give me errors after 8.33GB.
Note: all packages run in IIS (w3wp.exe). i'm configuring my new production boxes. the old production with similar envirnment (less speed) work with the same data and packages fine under load.
new production machine got more memory than the old machine but i get memory error (buffer). it doesn't even use up all available physical memory, only about 3gb (max), then start buffering to disk.
any help would be greately appreciated.
i also got
The system reports 31 percent memory load. There are 10734981120 bytes of physical memory with 7326126080 bytes free. There are 3221094400 bytes of virtual memory with 283840512 bytes free. The paging file has 12661686272 bytes with 9633767424 bytes free.Error Code = -1073450991
this was before i increased virtual memory to 20gb(from 4gb).
Any ideas i can try out?
View 4 Replies
View Related
Sep 15, 2007
Hi,
I am having problem with the CRecorset::Update() function.
I have declared a CRecordset object in client Application in VC++6.0.
I open the recordset in dynamic mode.
Before opening the recordset , I have obtained the UPDLOCK on the base table.( Obviously this UPDLOCK is in transaction).
When I try to call CRecordset::Update() it gives me exception 16931(There are no rows in the current fetch buffer).
I have define a clustered index on this table.
But I still get the exception 16931 on calling CRecorset::Update().
Any help is much appreciated.
Thanks in advance.
View 2 Replies
View Related
Nov 1, 2007
Hi,
I get folllwing error while SSIS package is executing and uploading Data from Flat Files to SQL Server 2005. This Error goes away when I change my SSIS Package Connection Manager to read UNICODE data files.
Is there any smart way to figure out which flat files have UniCode Data in the and which is not a Unicode data file.
Thanks,
Vinod
Information: 0x402090DC at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has started.
Information: 0x4004300C at Upload EP Data, DTS.Pipeline: Execute phase is beginning.
Error: 0xC020209C at Upload EP Data, DAT File Reader [1]: The column data for column "SYSTEM_LOCKED" overflowed the disk I/O buffer.
Error: 0xC0202091 at Upload EP Data, DAT File Reader [1]: An error occurred while skipping data rows.
Error: 0xC0047038 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DAT File Reader" (1) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Upload EP Data, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has ended.
View 13 Replies
View Related
Mar 15, 2006
Hello:
I tried to synchronize the SQL 2000 database with the SQL mobile server on PDA with SQL server management studio from SQL 2005. I got the error as €œThe buffer pool is too small or there are too many open cursors. HRESULT 0x80004005 (25101) €?. The SQL database file size is 120MB.
I create the .sdf file on PDA with the following C# code:
string connString = "Data Source='Test.sdf'; max database size = 400; max buffer size = 10000;";
SqlCeEngine engine = new SqlCeEngine(connString);
engine.CreateDatabase();
I think the 400MB max database size and 10000KB max buffer size are big enough to hold that SQL database data and I have already successfully synchronized my PDA with another smaller SQL server database file. I have been kept trying and searching this for couple of days and still can not figure it out.
Moreover, the synchronization always stops at the same table.
Please help and a lot of thanks in advance.
View 1 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Oct 4, 2005
Hi,
I’m attempting to use DTS to import data from a Memo field in MS Access (Jet 4.0 OLE DB Provider) into a SQL Server nvarchar(4000) field. Unfortunately, I’m getting the following error message:
Error at Source for Row number 30. Errors encountered so far in this task: 1.
Data for source column 2 (‘Html’) is too large for the specified buffer size.
I also get this error message when attempting to import the same data from Excel.
Per the MS Knowledgebase article located at http://support.microsoft.com/?kbid=281517, I changed the registry property indicated to 0. This modification did not help.
Per suggestions in other SQL Server forums, I moved the offending row from row number 30 to row number 1. This change only resulted in the same error message, but with the row number indicated as “Row number 1�. (Incidentally, the data in this field is greater than 255 characters in every row, so the cause described in the Knowledgebase article doesn’t seem to be my problem).
You might also like to know that the data in the Access table was exported into this table from a SQL Server nvarchar(4000) field.
Does anybody know what might trigger this error message other than the data being less than 255 characters in the first eight rows (as described in the KB article)?
I’ve hit a brick wall, so I’d appreciate any insight.Thanks in advance!
View 9 Replies
View Related
Oct 11, 2004
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
View 4 Replies
View Related
Oct 23, 2005
Hi,I've developed an ASP.NET application which uses MS-SQL Server 2000 as abackend. But as the site hits increase SQL server reponse becomes lower.At some stage after that SQL Server gets automativally stopped bringingcomplete web-application down to halt. i checked the Windows 2000 EventLogs and found several error logs indicating folloowing line."SQL Server 2000 Error 17805 Invalid buffer received from client.". Butno errors on UI side. What may be the actual problem.In storedproceduresor at some other place?Awaiting favourble reply.Regards,Amit*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Mar 5, 2008
Hi Everyone-
i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
thanx
Maylo
View 5 Replies
View Related
Feb 2, 2006
I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile.
I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition".
The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors."
My question is 2 part. First, what is causing this error, and second, how can it be resolved?
View 1 Replies
View Related
Oct 26, 2007
I have a gridview and a dataset. When I start my application I see the results in my gridview. When I clic on edit and chanche some value and click on update it wil give me this error:ObjectDataSource 'ObjectDataSourcePersoon' could not find a non-generic method 'Update' that has parameters: naam, tussenvoegsel, achternaam, adres, woonplaats, telefoonnummer, original_id, Original_naam, Original_tussenvoegsel, Original_achternaam, Original_adres, Original_woonplaats, Original_telefoonnummer. Does someone know whats the problem??
View 10 Replies
View Related
Apr 27, 2004
We have a SQL Server 2000 in a Windows 2003 Server, and we were working very well with the VB 6.0, but after an update in the Windows 2003, the Open method in ADO results in an error -2147467259 sometimes, but if we try the same code in a computer with another domain there are not any problem, some advice?
View 1 Replies
View Related
Jan 9, 2008
Hi,
I have a strange problem with calling packages from c# code. Packages start to execute, but never finish. Instead an error occures in eventlog:
(message is translated into english so it can sound a bit different)
Erring application AppName.exe, version 1.0.0.0, timestamp 0x4784c811, erring module ntdll.dll, version 6.0.6000.16386, timestamp 0x4549d372, exception code 0xc0000374, error shift 0x00000000000c87b7, process ID 0x1284, application start time 0x01c852ceb26bbad3.
In debuger, execution stoppes on line "DTSExecResult res = dtsPkg.Execute();", but no error is showed.
This behaviour occured unexpectally. Application worked correctly and in a minute I wasn´t able to execute any package from an application. I also tryed it from another computer and got the same error. Calling packages directly from management studio works fine.
OS:
Windows Vista Bussiness 64b
Code:
Package dtsPkg = new Package();
Variables variables = dtsPkg.Variables;
Microsoft.SqlServer.Dts.Runtime.Application dtsApp = new Microsoft.SqlServer.Dts.Runtime.Application();
dtsPkg = dtsApp.LoadFromSqlServer(@"\PackageName", "server", null, null, null);
dtsPkg.InteractiveMode = true;
dtsPkg.DebugMode = true;
dtsPkg.LoggingMode = DTSLoggingMode.Enabled;
dtsPkg.VariableDispenser.LockOneForWrite("FilePath", ref variables);
Variable pathVar = variables[0];
pathVar.Value = filePath;
variables.Unlock();
DTSExecResult res = dtsPkg.Execute();
I will be grateful for any ideas
Janca
View 8 Replies
View Related
Oct 22, 2001
Hi,
I'm getting an error that reads "The conversion of a char data type to a datetime data type resulted in an out of range value data time value"
for the following view sql:
CONVERT (datetime, System . dbo.zStatus.MyDate)
MyDate is a char(8)
Any suggestions?
Thanks,
Denise
View 2 Replies
View Related
Dec 3, 2007
Hi
the following code generates an error while executing dbServer.Databases("InvModel").Transfer dbTransfer
error description
[SQL-DMO]Invalid parameter type; must be string or numeric ordinal, or an object; check documentation for this property or method.
I am trying with sql2005 express edition. the code was one which we used for sql 2000
Code Block
Dim dbTransfer As New SQLDMO.Transfer2
Dim dbServer As New SQLDMO.SQLServer2
dbServer.Connect gStrSQLServerName, "sa", "NEWTECH001"
With dbTransfer
.DestDatabase = Trim(txtCompCode)
.DestLogin = "sa"
.DestPassword = "NEWTECH001"
.DestServer = gStrSQLServerName
.DropDestObjectsFirst = True
.CopyAllObjects = True
.CopyAllTables = True
.CopyAllViews = True
.CopyData = SQLDMOCopyData_Replace
.IncludeDependencies = False
End With
Screen.MousePointer = vbHourglass
prgbar.Value = 35
dbServer.Databases("InvModel").Shrink 1, SQLDMOShrink_Default
DoEvents
Screen.MousePointer = vbHourglass
prgbar.Value = 50
DoEvents
dbServer.Databases("InvModel").Transfer dbTransfer
DoEvents
Screen.MousePointer = vbHourglass
REgds
Pramod
View 1 Replies
View Related