I am very new to SQL and just completed an install of SQL 2005 Express. After install, I downloaded the Adventure Works database and attempted to attach through both the Object Browser (right-click 'Databases'--->'Attach') and by running the script that is located on the SQL download page where I got the Adventure Works db.
Here's the error that I get:
"Could not find row in sysindexes for database ID 8, object ID 1, Index ID 1. Run DBCC CHECKTABLE on sysindexes."
I have attempted to go through the help files, but unfortunately the above message is too cryptic for me and I have no idea what it's telling me.
When I am trying to process the dimension "Clustered Customers"
I get an error of the following words, ...
OLE DB error: OLE DB or ODBC error: The following system error occurred: The token supplied to the function is invalid .; File system error: The following error occurred while reading from the file 'Compressed stream'..
SELECT 1 AS [dbo_FactInternetSalesReason0_0],[SalesReasonKey] AS [dbo_FactInternetSalesReasonSalesReasonKey0_1] FROM [dbo].[FactInternetSalesReason] ) AS [dbo_FactInternetSalesReason] Processing Mining Structure 'Customer Mining'. Start time 5/6/2007 1:45:40 AM Processing Cube 'Customer Clusters ~MC'. Start time 5/6/2007 1:45:40 AM Processing Measure Group '~CaseDetail ~MG'. Start time 5/6/2007 1:45:41 AM Processing Partition '~CaseDetail ~MG'. Start time 5/6/2007 1:45:41 AM Processing Measure Group 'Internet ~1 ~MG'. Start time 5/6/2007 1:45:41 AM Processing Partition 'Internet ~1 ~MG'. Start time 5/6/2007 1:45:41 AM SQL queries 1 SELECT DATAID ( [Adventure Works].[Internet Sales].[$Customer.Customer] ) AS [Sales0_0], AGGREGATE ( [Adventure Works].[Internet Sales].[Internet Sales Amount] ) AS [Sales0_1], DATAID ( [Adventure Works].[Internet Sales].[$Product.Subcategory] ) AS [Sales0_2] FROM [Adventure Works].[Internet Sales] GROUP BY [Sales0_0],[Sales0_0],[Sales0_2] ORDER BY DATAID ( [Adventure Works].[Internet Sales].[$Customer.Customer] )
ASC Error Messages 1 OLE DB error: OLE DB or ODBC error: The following system error occurred: The token supplied to the function is invalid .; File system error: The following error occurred while reading from the file 'Compressed stream'..
Any ideas what could be causing this error occurred while reading from the file 'Compressed stream'.. problem?
I was studying the Adventure Works database because I read it contains good examples of best practices.
It has an ID column for each table that is auto-incrementing Primary Key. There is also a row guid which seems redundant since the ID PKs are identity columns that increment automatically and should be unique in a given table.
What is the purpose of the row guid being used in conjunction with the ID which should be unique in a given table?
The Data Mining Tutorial accompanying the June CTP includes mention of a table DimProspect. Despite the csv file existing in the Program FilesMicrosoft SQL Server90ToolsSamplesAdventureWorks Data Warehouse path containing the data for the table, the instawdwdb script doesn't include any reference. Can someone supply me with the necessary script for this table?
I'm new to the whole DB thing so I wanted to start off easy and download SQL Express. That part worked fine so I tried to install the Adventure Works DB to get some practice using the SQL commands. The problem is every time I click on a table in Adventure Works and choose Open Table I get a Microsoft SQL Server Management Studio box that pops up. The error says: Class Not Registered (Exception from HRESULT: 0x80040154 REGDB_E_CLASSNOTREG))
(Microsoft.SqlServer.SqlTools.VSIntegration)
Help!! Any ideas out there how to get the Adventure Works DB working? Thx much.
C:Program FilesMicrosoft SQL Server90ToolsSamplesAdventureWorks Analysis Services ProjectStandard, select the file Adventure Works DW.sln
---------------------------error msg Microsoft Visual Studio
The application for project 'C:Program FilesMicrosoft SQL Server90ToolsSamplesAdventureWorks Analysis Services ProjectstandardAdventure Works DW Standard Edition.dwproj' is not installed.
Make sure the application for the project type (.dwproj) is installed.
I am trying to locate the solution file for the Adventure works DW included as part of the installation of SQL Server 2005 to be opened in Business Intelligence Development Studio, But where is the solution file saved? I can see its database from Management studio but I need to know its solution file to locate it in Business intelligence studio. Please could anyone here give me some idea about that. Thanks a lot in advance for any help and guidance for that.
I have got sql server developer 2014 64 bit, but i cannot attach the adventure works 2014 or 2012, keeps giving me errors. so is their an exe file or another way to install this to the database.
Using windows 8.1 64 bit enterprise, jaws 16, and sql server 2014 developer 64 bit.
I'm running Windows Xp Pro With SQL 2005 Dev edition with Adventure Works sample db installed. I am the local administrator on my desktop, the services are up and running and I specified local connections only since this is the DEV edition of SQL05.
When I try either one of these connection strings: Data source=(SQLDEV05); initial catalog=AdventureWorks or Data source=(local); initial catalog=AdventureWorks.
I receive this error message:
TITLE: Microsoft Report Designer -----------------------------
A connection cannot be made to the database. Set and test the connection string.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
I am trying to create a Adventure Works Tabular cube in my developing machine and im having problems deploying the tabular cube (the DW database was firstly attached without problems)
So I'm having problems processing Adventure Works Tabular Cube, the problems are somewhere between SSAS project configuration and running privileges, i think. I'll describe exactly where i am:
- in SSMS 2012, connections, tables and roles and roles are empty, i only have the full name of the database when I try to process i get an error "the table with id of "product category 92583829......", Name of Product Category refereced by the model Cube, does not exist. An error ocurred when loading the model cube, '?c:program filesmicrosoft sql serverMSAS11.MSSQLSERVEROLAPDataAdventureWorks Tabular model SQL 2012.0.dbModel.21.cub.xml'. (Microsoft AnalysisServices.)"
- in SQL Server configuration Manager, I have Sql Server (MSSQLSERVER) running with account NT ServiceMSSQLSERVER Sql Server Analysis Services (MSSQLSERVER) running with account .L.ABCDE , which is my account, i've changed because i've read somewhere that i could have problems with privileges.
(Note: it's strange because SSAS is tabular, i can see a blue rectangle (sort of) in SSMS but in configurator manager seems to be a cube.)
- in SSAS Project i unzip a clean copy of the project and the first error is that BIM file can't be found, it try's to find server TOSHIBA_S50_BTAB, but as i have only tabular SSAS running, i replace for TOSHIBA_S50... And some time ago it worked, now it doesn't even found TOSHIBA_S50_B?!!!!
i followed all the instruction to add the database of the adventure works to the database server. but when i attach the database from the managment sql server this error comes
Couldnt find row in sysindexes for database ID 8, object ID1 ..........etc
and couldnt open new database 'adventureworks'. create database is aborted.
please i need a qucik help. cuz i tried the msdn and i failed.
Hi I have three questions about several topics. In this code: public string ConnectionString { get { return "Provider=MSOLAP.3;Data Source=localhost;Initial Catalog=Adventure Works DW"; } }
What is data source and initial catalog and what does this code do? And if I want to use other database how can change this code? (This code is for data mining viewer client project) And in this code: SqlConnection cn = new SqlConnection("Data Source=localhost;Initial Catalog=AdventureWorks;Integrated Security=True"); SqlCommand cm = new SqlCommand("Select AddressID,AddressLine1 from Person.Address", cn); SqlDataAdapter da = new SqlDataAdapter(); da.SelectCommand = cm; DataTable dt = new DataTable(); da.Fill(dt); this.comboBox1.DisplayMember = "AddressLine1"; this.comboBox1.ValueMember = "AddressID"; this.comboBox1.DataSource = dt;
what is comboBox1.DisplayMember and comboBox1.ValueMember ,and what is difference between those ? and other question: in adventure works dw project for data mining predicting ,in forecasting model ,if I want to show the result of this query in the combobox in c# how can I show that? SELECT PredictTimeSeries(amount) From [Forecasting] And again in this code ,it has a result which has two culomns ,on of them is for amount and other column is for time ,in sql I can save this result in exsiting table or neew table with wizard,but I want to Do this work in c#,that€™s mean with a adomdconnection I connect to forecasting model and write this query then in a datagridviwe ,Iwant to see the values of prediction in adventure works dw database. Other question: In €œdataminingviwerclient€? project I change this code and you can see it,for this code I have a form that give servername and catlogname in that and then with clcking on a button I want to show the chart of model in a child form ,but I can€™t.
public Form1 form1 = new Form1(); public string m_ServerName; public string m_CatalogName; public Form3() { m_ServerName = ""; m_CatalogName = ""; InitializeComponent(); }
public string ConnectionString { get { return "Provider=MSOLAP.3;Data Source=localhost;Initial Catalog=Adventure Works DW"; } }
private void ShowModel(Panel panel, string modelName) { AdomdConnection conn = new AdomdConnection(); try { MiningModelViewerControl viewer = null; MiningModel model = null; MiningService service = null;
// Clear any existing controls from the panel if (panel.HasChildren) panel.Controls.Clear();
// Connect to server conn.ConnectionString = ConnectionString; conn.Open();
// Determine the viewer type based on the model service and // instantiate the correct viewer model = conn.MiningModels[modelName]; service = conn.MiningServices[model.Algorithm]; if (service.ViewerType == "Microsoft_TimeSeries_Viewer") viewer = new TimeSeriesViewer(); else throw new System.Exception("Custom Viewers not supported");
// Set up and load the viewer viewer.ConnectionString = ConnectionString; viewer.MiningModelName = modelName; viewer.Dock = DockStyle.Fill; panel.Controls.Add(viewer); viewer.LoadViewerData(null); } catch (System.Exception ex) { MessageBox.Show(ex.Message, "Model Load"); } conn.Close(); when I run this code ,I have one error that say: the €œ object not found parametr name:index Please see this code and answer my question. If you just can answer one of my qestions ,please say. Thanks a lot for your answers.With best wishes for you
I am trying to delete tables from data where the ModifiedDates older than 9 years in AdventureWorks2012 database . I get console notified that foreign keys are dropped but the delete statement is throwing errors. I am sure that somewhere the key constraints are not getting altered, but i'm not able to figure it out as i'm a relative beginner to T-SQL. The error and code:
The DELETE statement conflicted with the REFERENCE constraint "FK_SalesOrderHeaderSalesReason_SalesReason_SalesReasonID". The conflict occurred in database "AdventureWorks2012", table "Sales.SalesOrderHeader [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null $option_drop = new-object Microsoft.SqlServer.Management.Smo.ScriptingOptions; $option_drop.ScriptDrops = $true;
TITLE: Microsoft SQL Server Management Studio Express------------------------------ Attach database failed for Server 'srvsqlsrv'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476 ------------------------------ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup. (Microsoft SQL Server, Error: 5173) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=5173&LinkId=20476 ------------------------------BUTTONS: OK------------------------------
hi all i am working on sql server 2005 When i am trying to attach database in my server i am getting following error. Plz help me to fix this error. the error as as follows :
Attach database failed for Server 'myserver'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. Could not open new database 'ReportServer'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
hi all i am working on sql server 2005 When i am trying to attach database in my server i am getting following error. Plz help me to fix this error. the error as as follows :
Attach database failed for Server 'myserver'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. Could not open new database 'ReportServer'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
I was getting following error while creating a database or attaching a database to sql server 2005
"The file <<*.mdf>> is compressed but does not reside in a read-only database or filegroup.."
In this scenario, if you try sp_attach_db procedure, you get following error: Msg 5118, Level 16, State 1, Line 1
After little bit of troubleshooting, I found this was happening because of a folder option (of the folder where database file reside (in case of attach) or being created (in case of create)).
Go to folder properties, General Tab, click on Advanced button,check "Compress or Encrypt attributes" section. If the first option (Compress contents to save disk space) is checked, you get that error. Uncheck it to fix that problem.
I'm trying to attach a database file and it's associated database log file to SQL Server. However I am using the 'SQLDataRoot' value from the registry to determine the absolute path to the DB file and DB log file. Like so...
USE [master]
DECLARE @RC int
/* read path to SQL Server Express Data directory from registry */ DECLARE @sql_server_data_dir sysname EXEC @RC = master..xp_regread N'HKEY_LOCAL_MACHINE',N'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1Setup',N'SQLDataRoot', @sql_server_data_dir OUTPUT SET @sql_server_data_dir = @sql_server_data_dir + N'Data'
CREATE DATABASE [PROJECT_DB] ON (FILENAME = '''' + @sql_server_data_dir + 'PROJECT_DB.mdf'''), (FILENAME = '''' + @sql_server_data_dir + 'PROJECT_DB_log.ldf''') FOR ATTACH;
GO
I have also tried using the sp_attach_db stored procedure as follows
I'm trying to attach a MSDE 2000 database to SQL Server 2005 Express.
I simply issue sp_detach_db XXX where XXX is the name of my MSDE database. Then sp_attach_db or create database ... with attach and both way gets the following message:
Event ID. : 3415
Description: Database 'XXX' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
I'm learning to use BIDS, and have been going through the exercise in Chapter 19 of the book Professional SQL Server 2005 Integration Services. I'm probably in over my head with this since I've never used any SQL services/software before, but the company I'm interning at wants to build a workflow using SSIS, and for some reason unbeknownst to me, I volunteered to train myself for the task. I'm at a part in the book exercise where I'm editing one of the components of a Data Flow task - an OLE DB Destination. When I try to select the table/view in the editor for this, it gives me the following error:
€œAn attempt to attach an auto-named database for file C:Documents and SettingsgroseMy DocumentsVisual Studio 2005ProjectsCase Study ExerciseCase Study ExerciseCase Study.database failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.€?
When I googled this, most people seemed to be getting it through other SQL software, so I'm not sure if the error has the same cause or not. I know that the file in the above error message already exists, but I don't understand why the task editor won't just let me select a database that already exists so I can complete the component. Can anyone explain this to me?
to download AdventureWorksDB.msi. Once I save that to my local machine I run the install and it completes with no errors. Unfortunately, I can't see any of the data in SQL Server Management Studio Express. I'm new to SQL Server Express so maybe its me, but I get the feeling that it was never added to the database. I'm still looking for SQLServerExpressSamplesOverview.htm to see if I am missing a step but I can't find it anywhere.
The install seems to have extracted database files but if I need to run some scripts by hand to create the database I don't know which order to run them in.
I have been asked to edit a web based database and have been given the site on cd. I have installed IIS, sql server express and Visual Web Developer express. I am having problems getting the mdf database connected. It works at the school where they have it installed and as far as I know I have mirrored the configuration they have on one of my test servers. The database is in App_Data the connection string is "Data Source=.SQLEXPRESS;AttachDbFilename=c:inetpubwwwrootApp_Datacampbell.mdf;Integrated Security=True;User Instance=True" And the state is closed. When I view one of the aspx pages in IE I get the following.
Server Error in '/' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
Line 6: <compilation defaultLanguage="vb" debug="true" /> Line 7: <customErrors mode="Off" /> Line 8: <authentication mode="Windows" /> Line 9: <trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" /> Line 10: <sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;user id=sa;password=" cookieless="false" timeout="20" />Source File: c:inetpubwwwrootappcampbell_houseweb.config Line: 8 The common error is: "Error 1 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. c:inetpubwwwrootAppCampbell_HouseWeb.config 8 " When I test the database connection I get a message The header file for 'c:inetpubwwwrootApp_Datacampbell.mdf ' is not a valid database file header. The File Size property is incorrect. An attempt to attach an auto named database for file 'c:inetpubwwwrootApp_Datacampbell.mdf ' failed.A database with the same name existsor the specified file cannot be opened or it is located on a UNC share Any help would be great.
Attemping to reattach a recovered .mdf and associated .ldf from a crashed disk drive and I am getting the error below. I attempted to create a new db, stop the service, replace the new data files with the recovered db files and restarted the SQL service so that I could run a dbcc checkdb while the db was in suspect mode, however was unable to do this. This error leads me to belive that the log file needs to be rebuild, but that the mdf files could be a decent shape. Any help would be apprecaited. Thanks!
===================================
Attach database failed for Server 'AUTOBASEAutobase'. (Microsoft.SqlServer.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files, String owner) at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabaseData.PrimaryFile.Attach() at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.SendDataToServer()
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries) at Microsoft.SqlServer.Management.Smo.Server.AttachDatabaseWorker(String name, StringCollection files, String owner, AttachOptions attachOptions) at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files, String owner)
===================================
An error occurred while processing the log for database 'ABSystem7'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log. Could not open new database 'ABSystem7'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=9004&LinkId=20476
------------------------------ Server Name: .Autobase Error Number: 9004 Severity: 21 State: 1 Line Number: 1
------------------------------ Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
I have a VBExpress 2008 application that uses LINQ to SQL to manipulate data in an SQLExpress 2005 database.
I successfully instatiate a DataContext object and examine its metadata through its .Mapping methods and properties. But when I attempt to set the DataSource for a BindingSource control to one of the tables, I get a run-time error.
Specifically:
Dim dc As New DiabetesData(My.Settings.DiabetesData_dbPath)
generates the error: System.Data.SqlClient.SqlException was unhandled Class=14 ErrorCode=-2146232060 LineNumber=65536 Message="An attempt to attach an auto-named database for file SbearMedicalDiabetesDiabetesData2.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share." Number=15350 Procedure="" Server="\.pipe8280AA0D-38A6-41 sqlquery" Source=".Net SqlClient Data Provider" State=1
From the Immediate window: ?My.Settings.DiabetesData_dbPath
"SbearMedicalDiabetesDiabetesData2.mdf"
bsPrimary is a BindingSource on a form named frmEZView.
Public Class DiabetesData includes a property Public BGTests As Table(Of BGTest) and a subsequent definition of BGTest.
The situation : I am making mass changes to my program and database. The goal is to not make changes to the database at the customer sites, but to clone their current database, and work with that one.
The solution: I wrote code and queries to detach the database, copy it to another directory on the same computer with a different name, then attach it with the new name. The process is: run : sp_detach_db "' + aDatabase + '", ''false'';' (aDatabase is the original database name) Then, in code, delete the original .ldf file, and copy the database.mdf file to new directory with new name. then run (for both the new and the original databases):
This works, up to a point. The problem : When I inspect the properties of the newly attached database, with the new name and new directory, the logical name of the database is still the original name.
but it returns(even though I have deleted the .ldf files for the original dataset) : Could not open new database 'Test62'. CREATE DATABASE is aborted. Cannot create file 'E:Data6Test62Test62_log.LDF' because it already exists. Change the file path or the file name, and retry the operation. File activation failure. The physical file name "E:Data6TestTest_log.LDF" may be incorrect.
(original database name = data6 est est, new database name is data6 est62 est62) Is there a way to do this? Or do I just need to give it up?
hello i am having a problem attaching database. The Problem :
I have created a database using sqlserver express edition.now i have installed enterprise edition ,so i am attaching the database which is created in sqlserver express edition into the enterprise edition.it is showing error
TITLE: Microsoft SQL Server Management Studio ------------------------------ Attach database failed for Server 'SRINIVAS'. (Microsoft.SqlServer.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ Could not find row in sysindexes for database ID 13, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. Could not open new database 'FMS'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ Can anyone Help me
We've tried attaching the mdf files given to us by some customers using the script they've provided, too.
I created the database with the corresponding names, and tried to run their script. However, I get the message "The media family on device 'D:DatabaseDVVAD01.mdf' is incorrectly formed. SQL Server cannot process this media family."
What could possibly have gone wrong? Is it also possible that the file was not properly detached, or what?
