Hi, I'm very new to SQL. Trying to sum two fields, but I have to change the datatype first. Here's the code and the error message I receive. Any help would be appreciated.
SELECT TS_RESPONSIBLE, TS_STATUS, TS_USER_07, SUM(TS_USER_07 * TS_STATUS) AS value
FROM TEST_54_VW
GROUP BY TS_RESPONSIBLE, TS_STATUS, TS_USER_07
WHERE CAST(TS_USER_07 AS INTEGER)
Incorrect syntax near the keyword 'WHERE'.
I am keep getting error when I use CAST function in Expression.
If I run (DT_I4)("1") I got following error.
TITLE: Expression Builder
------------------------------
Cannot convert expression value to property type.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Controls.TaskUIFramework.TaskUIFrameworkSR&EvtID=CannotAssignExpressionToProperty&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Cannot convert 'System.Int32' to 'System.Int64'.
------------------------------
BUTTONS:
OK
------------------------------
I'm encountering a Cast error, and find I am very much out of my league... I'm using a Derived Column Transformation to convert a column that comes from an Excel spreadsheet from a non-standard date format to DT_Date, though I picked this format simply because it was the first date format I found in the pick list. When I upload the ETL into Management Studio and run it I get the following error:
Code Block
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
01/03/2008 07:27:52,Force_Receipt_To_Clear_From_Excel,Error,0,WFM-SQL1-RDM,Force_Receipt_To_Clear_From_Excel,(Job outcome),,The job failed. The Job was invoked by User Removed. The last step to run was step 1 (Run Force_Receipt_To_Clear_From_Excel).,00:00:35,0,0,,,,0
01/03/2008 07:27:52,Force_Receipt_To_Clear_From_Excel,Error,1,Sever_Name_Removed,ETL_NAME_REMOVED,Run ETL_NAME_REMOVED,,Executed as user: Removed. ....00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 07:27:52 Error: 2008-01-03 07:28:25.12 Code: 0xC0202009 Source: Data Flow Task OLE DB Destination [232] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". End Error Error: 2008-01-03 07:28:25.14 Code: 0xC020901C Source: Data Flow Task OLE DB Destination [232] Description: There was an error with input column "ASSIGNED_TO_DISPATCH" (2020) on input "OLE DB Destination Input" (245). The column status returned was: "Conversion failed because ... The package execution fa... The step failed.,00:00:35,0,0,,,,0
The data that is being converted appears as one of two things. First it can appear as a string value with 0 characters (that does not appear a Null oddly). Second it will appear as a string value representing a date in the following format 01022008 7:38 which is a date in the following the format 2 Digit Month, 2 Digit Day, 4 Digit Year, Space Time in Military Time.
The expression I'm using to convert the String data type to a Date is:
Code Block
LEN([Completed Date Time]) == 0 || ISNULL([Completed Date Time]) ? NULL(DT_DATE) : (DT_DATE)(SUBSTRING([Completed Date Time],1,2) + "/" + SUBSTRING([Completed Date Time],3,2) + "/" + SUBSTRING([Completed Date Time],5,10))
sqlConnection1.Open();
System.Data.SqlClient.SqlDataReader Dil1;
Dil1 = sqlDilGetir.ExecuteReader();
ddlDil1.Items.Add(new ListItem("1. Dil", ""));
while (Dil1.Read())
{
ddlDil1.Items.Add(new ListItem(Dil1.GetString(1), Dil1.GetString(0)));
}
Dil1.Close();
sqlConnection1.Close();
I used SQLDataReader to assign a OrderID to a text box.
OrderID is varchar type. I got cast error. How to fix it?
Me.txtOrderID.Text = myDataReader.GetString("OrderID")
I want to load a smallint field with values from a varchar field; e.g. CAST(field as SMALLINT). This is in a bulk copy insert so of course there are the few fields that have '1773A' for example and error out the CAST. Anyone know of a way to return 0 (or 1) if CAST errors on conversion ?
This is the test script that's trying to convert 3750 records (an unknown minority of records contain alpha characters):
create table alstest (field1 smallint)
insert into alstest (field1)
select CAST(conf_number AS SMALLINT) from conference
name1 field is is nvarchar(40).(1)select case when isnumeric(name1) = 1 thencast(name1 as int) else null end as nameIn (1) when name1 is not numeric, name is null andits type becomes number not string(40).And,(2)select case when isnumeric(name1) = 1 thencast(name1 as int) else name1 end as nameIn (2) when name1 is Not numeric it gives error:can not cast name to int.Basically, i like to convert name1 to Integer if it isnumeric or keep it in its origianl nvarchar(40) if itis Not numeric. how?.--Sent by 3 from yahoo element from comThis is a spam protected message. Please answer with reference header.Posted via http://www.usenet-replayer.com
View 2 Replies View RelatedI have a backup of DB with version Microsoft sql 2012 and i need restore this data base on instance Microsoft sql 2008 R2
when i try restore database on SQL server 2008 R2  i have the error:
Specified cast is not valid.
(SqlManagerUI)
I try to run code but got an error. How to fix it?
SELECT Cast(('20140304800084500001') AS BIGINT)
Arithmetic overflow error converting expression to data type bigint
I'm usung bcp to move data from one table to another. 202 million rows. The source/original table had 32 fields. The new table has 33 fields. I added a PK column to the destination/new table. The new PK column is the first field in the new table, it is set to autoincrement by 1 on each insert. The data file only has 32 fields of data per row.
The error is :SQLState = 22018, NativeError = 0 Error = [Microsoft][SQL Native Client]Invalid character value for cast specification
10 times, then bcp shuts off (default errors is 10).
C:>bcp dbname.schema.TP_LOG_NEW in e:alltplog.dat -S
dbsvr -T -f tplognew.fmt
tplognew.fmt:
9.0
33
1 SQLCHAR 0 41 " " 1 TP_LOGID_PK ""
2 SQLCHAR 0 41 " " 2 TP_LOG_ID ""
3 SQLCHAR 0 20 " " 3 PROCESS_TYPE SQL_Latin1_General_CP1_CI_AS
4 SQLCHAR 0 20 " " 4 SEVERITY_CODE SQL_Latin1_General_CP1_CI_AS
5 SQLCHAR 0 41 " " 5 TP_ERROR_REF_ID ""
6 SQLCHAR 0 41 " " 6 TP_PARTNER_ID ""
7 SQLCHAR 0 41 " " 7 TP_CUSTOMER_ID ""
8 SQLCHAR 0 500 " " 8 DESCRIPTION SQL_Latin1_General_CP1_CI_AS
9 SQLCHAR 0 255 " " 9 PROCESS_REF_ID SQL_Latin1_General_CP1_CI_AS
10 SQLCHAR 0 255 " " 10 PROCESS_NAME SQL_Latin1_General_CP1_CI_AS
11 SQLCHAR 0 24 " " 11 PROCESS_ARGUMENT_1 ""
12 SQLCHAR 0 24 " " 12 PROCESS_ARGUMENT_2 ""
13 SQLCHAR 0 24 " " 13 PROCESS_ARGUMENT_3 ""
14 SQLCHAR 0 24 " " 14 PROCESS_ARGUMENT_4 ""
15 SQLCHAR 0 41 " " 15 PROCESS_ARGUMENT_5 ""
16 SQLCHAR 0 41 " " 16 PROCESS_ARGUMENT_6 ""
17 SQLCHAR 0 41 " " 17 PROCESS_ARGUMENT_7 ""
18 SQLCHAR 0 41 " " 18 PROCESS_ARGUMENT_8 ""
19 SQLCHAR 0 500 " " 19 PROCESS_ARGUMENT_9 SQL_Latin1_General_CP1_CI_AS
20 SQLCHAR 0 500 " " 20 PROCESS_ARGUMENT_10 SQL_Latin1_General_CP1_CI_AS
21 SQLCHAR 0 500 " " 21 PROCESS_ARGUMENT_11 SQL_Latin1_General_CP1_CI_AS
22 SQLCHAR 0 500 " " 22 PROCESS_ARGUMENT_12 SQL_Latin1_General_CP1_CI_AS
23 SQLCHAR 0 41 " " 23 USER1 ""
24 SQLCHAR 0 24 " " 24 USER2 ""
25 SQLCHAR 0 255 " " 25 USER3 SQL_Latin1_General_CP1_CI_AS
26 SQLCHAR 0 255 " " 26 USER4 SQL_Latin1_General_CP1_CI_AS
27 SQLCHAR 0 255 " " 27 USER5 SQL_Latin1_General_CP1_CI_AS
28 SQLCHAR 0 32 " " 28 CREATED_BY SQL_Latin1_General_CP1_CI_AS
29 SQLCHAR 0 24 " " 29 CREATED_DATE ""
30 SQLCHAR 0 32 " " 30 CREATED_PROCESS SQL_Latin1_General_CP1_CI_AS
31 SQLCHAR 0 32 " " 31 MODIFIED_BY SQL_Latin1_General_CP1_CI_AS
32 SQLCHAR 0 24 " " 32 MODIFIED_DATE ""
33 SQLCHAR 0 32 "
" 33 MODIFIED_PROCESS SQL_Latin1_General_CP1_CI_AS
New table definition:
CREATE TABLE [schema].[TP_LOG_NEW](
[TP_LOGID_PK] [numeric](18, 0) IDENTITY(1,1) NOT NULL,
[TP_LOG_ID] [numeric](18, 0) NOT NULL,
[PROCESS_TYPE] [varchar](20) NOT NULL DEFAULT (),
[SEVERITY_CODE] [varchar](20) NOT NULL DEFAULT ('0'),
[TP_ERROR_REF_ID] [numeric](18, 0) NOT NULL DEFAULT ((0)),
[TP_PARTNER_ID] [numeric](18, 0) NULL,
[TP_CUSTOMER_ID] [numeric](18, 0) NULL,
[DESCRIPTION] [varchar](500) NULL,
[PROCESS_REF_ID] [varchar](255) NULL,
[PROCESS_NAME] [varchar](255) NULL,
[PROCESS_ARGUMENT_1] [datetime] NULL,
[PROCESS_ARGUMENT_2] [datetime] NULL,
[PROCESS_ARGUMENT_3] [datetime] NULL,
[PROCESS_ARGUMENT_4] [datetime] NULL,
[PROCESS_ARGUMENT_5] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_6] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_7] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_8] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_9] [varchar](500) NULL,
[PROCESS_ARGUMENT_10] [varchar](500) NULL,
[PROCESS_ARGUMENT_11] [varchar](500) NULL,
[PROCESS_ARGUMENT_12] [varchar](500) NULL,
[USER1] [numeric](18, 0) NULL,
[USER2] [datetime] NULL,
[USER3] [varchar](255) NULL,
[USER4] [varchar](255) NULL,
[USER5] [varchar](255) NULL,
[CREATED_BY] [varchar](32) NULL,
[CREATED_DATE] [datetime] NULL,
[CREATED_PROCESS] [varchar](32) NULL,
[MODIFIED_BY] [varchar](32) NULL,
[MODIFIED_DATE] [datetime] NULL,
[MODIFIED_PROCESS] [varchar](32) NULL,
CONSTRAINT [PK_TP_LOG_NEW] PRIMARY KEY CLUSTERED
(
[TP_LOGID_PK] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
I have created a SQL Stored Procedure that uses a Case statement todetermine the Order By. For one of the Case statements I am trying toturn a Char field into Datetime in for the Order By, however I can notget it to work. Can someone please take a look and my code below andtell me what I am doing wrong. Thank you.ORDER BYCASE WHEN @SortBy = 'dttm_stamp' THEN dttm_stamp End,CASE WHEN @SortBy = 'Event_Date1' THEN CAST(CONVERT(char(10),Event_Date1,101) as datetime) End,CASE WHEN @SortBy = 'FullName' THEN Emp_lastname + ', ' +Emp_firstname End,CASE WHEN @SortBy = 'FullName Desc' THEN Emp_lastname + ', ' +Emp_firstname End DESC,CASE WHEN @SortBy = 'Emp_SSN' THEN Emp_SSN End
View 11 Replies View RelatedHi,
I get the following error opening an existing (or working) ssis package on my new server.
Error loading 'TestExecutionFromScript.dtsx' : Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSContainer90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{8BDFE892-E9D8-4D23-9739-DA807BCDC2AC}' failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))..
I found in a blog that this is caused due to a dll which is not registered ("DTS.dll")
Can anyone try to explain the exact reason for this? I am not even able to execute a package from the command prompt using the dtexec utility. I have "Microsoft SQL Server Analysis Services Designer Version 9.00.3042.00" on my server. My other machine which executed this package successfully was running "Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00".
Thanks very much for any kind of help.
First, I hope this is in the correct spot.
I'm trying to build a SS 2005 db from a Sqlbase database and I have coded a program to bring over the data and insert. The problem I'm having is that on some of the tables, I'm getting an "Invalid character value for cast specification" error on an insert. I've found the offending row and discovered that it's an integer that is null in the source table.
The weirdness is, that in SqlServer, it is defined as an "int" column that can be null. I can insert the row through both Management console (connected natively) and through a sql utility from Sqlbase/Gupta (called sqltalk) connected thru ODBC. The problem is when I try the insert through OLEDB within the application, that's when I get the error. I changed the value from null to zero in the source table then it works. I think there must be a "set **** on" on the connection that I'm missing if I can enter the SAME data using Management console but I'm not sure what that is. I don't want to have to find ALL occurences of null integers in my entire database just to insert it into SqlServer.
Has anyone else had this problem??
I have a datagrid script where I modify data in an sql dbase in asp.net, when i hit the "update" button, I get a Specified cast is not valid error on my 'descript' declaration, whereas 'descript' is a multiline text box and a varchar datatype (everything else is either a char or a datetime datatype). Am I assigning 'descript' a wrong datatype? Tried making it a nvarchar, still get same result'''''''''''''''''''''''''''''''Sub MyDataGrid_UpdateCommand(s As Object, e As DataGridCommandEventArgs ) Dim conn As SQLConnection Dim MyCommand As SQLCommand Dim strConn as string = "Server=sql.mydomain.com;Initial Catalog=mydb;User ID=DBxxx;Password=xxxxx;" Dim company As textbox = E.Item.cells(2).Controls(0) Dim address As textbox = E.Item.cells(3).Controls(0) Dim city As textbox = E.Item.Cells(4).Controls(0) Dim state As textbox = E.Item.cells(5).Controls(0) Dim county As textbox = E.Item.cells(6).Controls(0) Dim zip As textbox = E.Item.cells(7).Controls(0) Dim phone As textbox = E.Item.cells(8).Controls(0)'''''' the following line declaring the descript var is the line of the error Dim descript As textbox = E.Item.cells(9).Controls(0) Dim web As textbox = E.Item.cells(10).Controls(0) Dim email As textbox = E.Item.cells(11).Controls(0) Dim datesold As textbox = E.Item.cells(12).Controls(0) Dim dateexpire As textbox = E.Item.cells(13).Controls(0) Dim strUpdateStmt As String strUpdateStmt =" UPDATE CPAs SET" & _ " company = @company, address = @address, city = @city, state = @state, " & _ "county = @county, zip = @zip, phone = @phone, descript =@ descript, " & _ "web = @web, email = @email, datesold = @datesold, dateexpire = @dateexpire" & _ " WHERE cpaID = @cpaID" conn = New SqlConnection(strConn) MyCommand = New SqlCommand(strUpdateStmt, conn) MyCommand.Parameters.Add(New SqlParameter("@company", company.text)) MyCommand.Parameters.Add(New SqlParameter("@address", address.text)) MyCommand.Parameters.Add(New SqlParameter("@city", city.text)) MyCommand.Parameters.Add(New SqlParameter("@state", state.text)) MyCommand.Parameters.Add(New SqlParameter("@county", county.text)) MyCommand.Parameters.Add(New SqlParameter("@zip", zip.text)) MyCommand.Parameters.Add(New SqlParameter("@phone", phone.text)) MyCommand.Parameters.Add(New SqlParameter("@descript", descript.text)) MyCommand.Parameters.Add(New SqlParameter("@web", web.text)) MyCommand.Parameters.Add(New SqlParameter("@email", email.text)) MyCommand.Parameters.Add(New SqlParameter("@datesold", datesold.text)) '', dateexpire =@dateexpire MyCommand.Parameters.Add(New SqlParameter("@dateexpire", dateexpire.text)) MyCommand.Parameters.Add(New SqlParameter("@cpaID", e.Item.Cells(1).Text )) conn.Open() MyCommand.ExecuteNonQuery() MyDataGrid.EditItemIndex = -1 conn.close BindDataEnd Sub'''''''''''''''''''''''''''''netsports
View 1 Replies View RelatedHi I have a varchar(8000) and currently XML files are stored in varchar(8000).Some times when i am doing manuplactions in my varchar column i am getting with special characters error. so now i want to keep my column varchar(MAX) and when i am doing calculations i will convert my varchar datatype to xml datatype. By doing this i hope there wont be any special character problems.
When i am doing calculations with the wellformed xml i am getting error for both convert and cast methods as below
I am trying to do convert(xml,MyVarcharColumn)
Implicit conversion from data type xml to nvarchar is not allowed. Use the CONVERT function to run this query.
Also i tried with casting and getting same problme. is there any way to convert
please suggest me
Thanks
Dilip
I am attempting to convert an integer value to a string using the Derived Column transformation with the following expression on the field:
(DT_STR,10,1252)prod_id
prod_id is an integer. I was able to do this before however, in the past couple of days, this has failed with the following error:
"An error occurred while attempting to perform a type cast."
To my knowledge, I have not changed anything about this particular data flow within the past couple of days. I have verified that the value is coming in as an integer.
Any help would be greatly appreciated.
Unable to cast object of type 'System.String' to type 'System.Web.UI.DataSourceSelectArguments'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.DataSourceSelectArguments'.
Hi, In my pageload i have data retriving from a page and i want it to load it in the GridView. i have GridView and SqlDataSource but when the page loads i am getting the above error. i am not sure what im doing wrong here. i tried different ways. but no luck Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not IsPostBack Thenfp = CType(Context.Handler, Member)
'lblEmail.Text = fp.EMM.ToString
'this labelbox for Email address is under the Name'lblEmail.Text = fp.EmailAddress.ToString
Dim conn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("imacstestConnectionString").ConnectionString)
Dim cmd As SqlCommand = New SqlCommand("SELECT , [fname], [mname], [lname], [address], [city], [state], [zip], [phone] FROM [t_CustomerAcct] WHERE = @email", conn)cmd.Parameters.AddWithValue("@email", fp.EMM.ToString)
conn.Open()
SqlDataSource1.Select(cmd.ExecuteScalar())
'.ExecuteScalar()
conn.Close()
End If
End Sub
Hi all!
I´m having some trouble with a SSIS package that I´ve been using five months or so now.
I have a package scheduled to run every 2 minutes to load data into my SQL Server instance
from our mobile computer systems. This data comes is read as flat file sources. My package runs 24/7.
My problem is that this package randomly returns "An error occurred while attempting to perform a type cast". This message is then returned during maybe 3 or 4 executions of the package. The error then vanishes into thin air, without me doing anything what so ever, and execution continues. The very same file that previously returned the errors is now processed without any problems.
I have no clue why this is, but I get the feeling that there has to be a reason for these random errors. To me, the type cast error seems to indicate problems with the data source (the flat file), but since the same file suddenly get processed without errors I have no clue where to start looking.
Anyone having the same issue?
Regards,
Daniel
Trying to do a update/insert from SQL 2005 query to Access 2003 linked table.
In the Script Transformation I get this error.
Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.OleDb.OleDbConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.
Destinatoin Oledb connection is Native OLEDB Jet 4 to Access 2003 database.
Private sqlConn As OleDb.OleDbConnection
Private sqlCmd As OleDb.OleDbCommand
Private sqlParam As OleDb.OleDbParameter
Private connstring As String
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
connMgr = Me.Connections.ConnectionOLE
'sqlConn = CType(connMgr.AcquireConnection(Nothing), SqlConnection)
connstring = connMgr.ConnectionString
sqlConn = CType(connMgr.AcquireConnection(Nothing), OleDb.OleDbConnection)
End Sub
Any help would be appreciated.
Hi all--Given a table called "buyers" with the following column definitions in a SQL Server 2005 database:
[BUYER] [nvarchar](40) NULL,
[DIVISION] [nvarchar](3) NULL,
[MOD_DATE] [datetime] NULL
This table is laden with Unicode data and the MOD_DATE contains no data--not even NULL values, and is giving me a headache as a result. I can export this data fine to a text file, but when I create an SSIS package to attempt import to another table defined exactly the same as above in another place, I get the following messages:
SSIS package "buyers_import.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Information: 0x402090DE at Data Flow Task, Source - buyers_txt [1]: The total number of data rows processed for file "D: emp3uyers.txt" is 232.
Error: 0xC0202009 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
Error: 0xC020901C at Data Flow Task, Destination - buyers_tst [22]: There was an error with input column "MOD_DATE" (45) on input "Destination Input" (35). The column status returned was: "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (35)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "Destination Input" (35)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - buyers_tst" (22) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has ended.
Information: 0x402090DF at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Destination - buyers_tst" (22)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "buyers_import.dtsx" finished: Failure.
Among the customizations in this package is the flag "ValidateExternalMetadata" set to False. The data itself is surrounded by " and delimited by semicolons for each field, with the header row set as the name of each column. It looks like this:
"BUYER";"DIVISION";"MOD_DATE"
"108 Joon-Hyn Kim";"TAD";""
"109 Kang-Soo Do";"TAD";""
"FS07 John Smith";"TAD";""
...
Can anyone suggest a course of action on how to handle the error when the MOD_DATE field is completely empty?
Thanks in advance,
Jonathan
When I open up my existing SSIS project, I always get this error. Does anyone know what was wrong ?
TITLE: Microsoft Visual Studio
------------------------------
Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.IObjectWithSite'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FC4801A3-2BA9-11CF-A229-00AA003D7352}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
I have OLE DB source which executes SP with 2 parameters and output is flat file. Every time I run I immediately get output below. How do I troubleshoot further what might be causing this?
Information: 0x402090DC at Data Flow Task, Flat File Destination [2]: The processing of file "C:UsersadminDesktopout.csv" has started.
Error: 0xC0202009 at Data Flow Task, OLE DB Source [41]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E21 Description: "Invalid character value for cast specification".
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: OLE DB Source failed the pre-execute phase and returned error code 0x80040E21.
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Hi
Can anyone tell me how I can CAST these fields AS DECIMAL (19, 2) please?
(SELECT ([Total students] - [withdrawn] - [transferred] - [cancelled]) / [total Students] * 100 AS [Percentage Retained])
Thanks
Daniel
I have
CASE
WHEN (a.type_id in (9))
THEN a.duration
ELSE 0 --CAST ( expression AS data_type )
END 'Time'
I need the duration to be displayed if type is 9 only.
so otherwise id ideally want 'N/A' displayed..
but it won't display it as its not an int ..
is there a way i can just display it temporarily
instaed of 0 ?
I am having a little trouble with the CAST in my SELECT statement below. Any help is greatly appreciated.
SELECT
group_id_ AS [Group ID],
vendor_id_ AS [Vendor ID] ,
project_id_ [Project ID],
resource_id_ [Resource ID],
vendor_price_ [Old Price],
new_price_ [New Price],
(CAST (new_price_/vendor_price_)-1 AS DECIMAL (4, 2)) AS [Difference]
FROM hbs_vnpq
WHERE (group_id_ = '210') AND (vendor_id_ = '08416') AND (new_price_ >0) AND (vendor_price_ >0)
ORDER BY [Difference]
Server: Msg 1035, Level 15, State 10, Line 7
Incorrect syntax near 'CAST', expected 'AS'.
im doing a sum on a table and it either returns a number in decimal format or 'null' . The problem is when it returns null i want it to just make the text say '0.00'. So i did a test on the object that if it returns NULL just print '0.00' but if it is not null it tells me that there is a number there and i want to store that as a decimal and print it out. But i get an error for a type cast when im not it should not even be going to that part of the code. In the code below the first executescaler will return null so it should just go straight to the else. But it gives me the type cast error in the if that shouldnt be seen. The error and code are below. //Borrower NSF FEES
cmd.CommandText = "select sum(itemamount) from postmtdtls where loanid='" + LoanID + "' and Transactioncode = '310'";
object temp = cmd.ExecuteScalar();
if (temp != null)
{
decimal B_NSFFees = ((decimal)cmd.ExecuteScalar());
borrowerPayoff_NSFFees.Text = String.Format("{0:#,#.##}", B_NSFFees).ToString(); //Borrower NSF FEES
}
else
{
borrowerPayoff_NSFFees.Text = "0.00"; //borrowerPayoff_NSFFees.Text = "0.00";
} Server Error in '/WebSite5' Application. Specified cast is not valid. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Specified cast is not valid.Source Error: Line 774: if (temp != null)
Line 775: {
Line 776: decimal B_NSFFees = ((decimal)cmd.ExecuteScalar());
Line 777: borrowerPayoff_NSFFees.Text = String.Format("{0:#,#.##}", B_NSFFees).ToString(); //Borrower NSF FEES
Line 778: }Source File: c:ProgrammingFilesWebSite5InvestorPool.aspx.cs Line: 776 Stack Trace: [InvalidCastException: Specified cast is not valid.]
InvestorPool.GetLoanInfo(String LoanID) in c:ProgrammingFilesWebSite5InvestorPool.aspx.cs:776
InvestorPool.MortAccountText(Object sender, EventArgs e) in c:ProgrammingFilesWebSite5InvestorPool.aspx.cs:660
System.Web.UI.WebControls.TextBox.OnTextChanged(EventArgs e) +75
System.Web.UI.WebControls.TextBox.RaisePostDataChangedEvent() +124
System.Web.UI.WebControls.TextBox.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +7
System.Web.UI.Page.RaiseChangedEvents() +138
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4507
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I am pretty new to SQL for SQL Server 2005. In a view I have a column CAST(Field1 as int). Field1 is a varchar.All works well except when the data is not numeric such as a '?' or '*'.How can I get around this, with a case statement, coalese?I only want to perform the CAST on valid numeric values.The valid values in the varchar field are blank, null,'0','1','2','3','4','5','?','*' and maybe othersThanks
View 11 Replies View RelatedIf I run the following query in SQL Server Management Studio it returns the correct results: (Searching the table for the field "SpecimenID (an INT)" against the data entered (a Text Field - "7575-01") from the submitted form.
SELECT ClinicalID, SpecimenID, PatientID, LabID, Accession, Bacillus, Francisella, Yersinia, Brucella, Burkholderia, Coxiella, Staphylococcus, Other, OtherExplanation, CollectionDate, strddlTransportMedium, strddlSpecimenSource, UserName, Test, SpecimenCount, DateAndTimeFROM ClinicalSpecimenWHERE (SpecimenID = CAST('7575-01' AS VARCHAR(50)))ORDER BY SpecimenID DESCHowever, when I try to use the same logic in the ASPX.VB code behind page, as follows below, I either get an error message (Syntax error converting the varchar value '' to a column of data type int.) or record not found.... Can someone please explain what I am missing here....
MySQL = "SELECT * FROM ClinicalSpecimen WHERE SpecimenID = CAST(('" & AccessionPresent & "') AS VARCHAR(50))"
*"AccessionPresent" is the value of the text field retrieved from the form.
I guess what I am really asking is how can I search for an INT value in a table using a VARCHAR Field.
Thank you for any or all assistance !!!
Hi,I want to turn int to double/decimal in microsoft sqlSHould i use cast or convert?if so, how i do it thanks,
View 1 Replies View RelatedHi over there,I hope this question is not too simple, but I didn't manage to figure out why...I would need an explanation for following issue:I'm reading data from a database (MSSQL) and it the column "PersonBirthday" is DBNull.I wanted to prevent the error (Textbox.Text = DBNull) with an IIF. The thing is I get thistypecast exception:"Conversion from type 'DBNull' to type 'Date' is not valid." This code is NOT working, why? txtPersonBirthday.Text = IIf(IsDBNull(.Item("PersonBirthday")) =
True, String.Empty,
CDate(.Item("PersonBirthday")).ToString("yyyy-MM-dd")) When I'm using this code, which is for me obviously the same, just with an if-block it works,and I want to know why - please explain. If IsDBNull(.Item("PersonBirthday")) Then txtPersonBirthday.Text = String.Empty Else txtPersonBirthday.Text = CDate(.Item("PersonBirthday")).ToString("yyyy-MM-dd") End IfThanks in advance,cheers,uquandux If IsDBNull(.Item("PersonBirthday")) Then txtPersonBirthday.Text = String.Empty Else txtPersonBirthday.Text = CDate(.Item("PersonBirthday")).ToString("yyyy-MM-dd") End If
Can anyone tell me what varbinary casts to ?? can I do this int[] temp=(int)DataReader["varbinaryColumn"]. Or is byte[] temp the appropiate protocol.
View 1 Replies View RelatedCan't seem to find why I'm getting this error: Specified cast is not valid.
Ok, using a stored procedure for SQL Server 2000 and here is the main part of it:
SELECT id, rank, firstName, lastName, service, status, createdTime FROM accessRequest WHERE lastName LIKE @tLastName AND firstName LIKE @tFirstName
And the C# code behind from the class file:
SqlDataReader spResults;
conn.Open();
spResults = command.ExecuteReader();
while( spResults.Read() )
{
AccessRequestSearch request = new AccessRequestSearch( (int)spResults.GetInt32( 0 ), spResults.GetString( 2 ), spResults.GetString( 3 ), spResults.GetString( 1 ), spResults.GetString( 4 ), spResults.GetString( 5 ), Convert.ToDateTime(spResults.GetString( 6 )));
searchResults.Add( request ); // Add to Array List
}
spResults.Close();
The part in red is where I think it's happening because that is what I just added to the request. createdTime in the table is set as DateTime.
Can anyone see what I am missing here?
More info is available if needed.
Thanks,
Zath