Error When Setting Map Document Label In A Group Of A Table
May 21, 2007
Hi,
I try to activate the map document control on my report. My Report is composed of a table in which I group by 2 criterias. When I set the document map label of the first entry of the group list then I get an error on the preview :
"An internal error occurred on the report server. See the error log for more details. "
Can someone tell where can I find the error log file ?
I have a Report that has a document map Label in the Report which I need to remove. However as the report has over 50 text-boxes I am having difficulty locating it. I have had a look at the XML but that does not seem to indicate the offending text box. Any advice would be greatly appreciated.
I've made a report in which there are always one tablix under each textbox. I tried to produce a document map by giving document map labels for each textbox.
Everything works fine in Report Builder (3.0), but when run in the browser (IE, Firefox) the document map doesn't seem to work: when trying to navigate with document map by clicking the labels the report runs to the end of the report - not to the textbox where it should go...
I tried to solve problem using bookmarks instead of Document map, but there similar problem occurred. Bookmarks seem to work with Google Chrome, but I need a solution that would work better in most of the browsers.
So the problem seems to be that document map label navigates to bottom of the page. Added pagebreak after each tablix worked but since the tablixes are longer than screen there's still problem - document map should be set to navigate to the top of the page.
[rsRuntimeErrorInExpression] The HeadingLabel expression for the chart €˜chart4€™ contains an error: Argument 'Length' must be greater or equal to zero.
What I am trying to do is only display the text preceding the "-" if it exists within the text otherwise just show the text as it is.
Hi all. I have a label on my page and I want to bind it to a field in a table. The catch is that I want to bind it to the last row in the table. I think I can use the custom binding, but I don't know how to bind to the last row. Any Suggestions ? p.s. The page is tied to an SqlDataSource that retrieves the data from the above table. Thanks in advance.
Hi,I have a problem:I am writing an update script for a database and want to check for theversion and Goto the wright update script.So I read the version from a table and if it match I want to "GotoVersionxxx"Where Versionxxx: is set in the script with the right update script.Whenever I have some script which need Go commands I get error in theoutput thatA GOTO statement references the label 'Versionxxx' but the label hasnot been declared.But the label is set in the script by 'Versionxxx:'Is there a way I can solve this easily?Thanks in advance
I am trying to fill a Textbox with the Label-Field from the Report Parameters. The Multi-Value-Option is checked and it is possible to select multi-values from the time hierarchy [Time].[Year - Half Year - Quarter - Month].
For example you can choose: "Calendar 2007" ([Time].[Year - Half Year - Quarter - Month].[Year].&[2007-01-01T00:00:00]) "Quarter 4, 2006" ([Time].[Year - Half Year - Quarter - Month].[Quarter].&[2006-10-01T00:00:00]) and "April 2006" ([Time].[Year - Half Year - Quarter - Month].[Month].&[2006-04-01T00:00:00])
Now I want to fill a Textbox with the chosen parameter values by putting following expression as value of the textbox:
Parameters!TimeYearHalfYearQuarterMonthDate.Label ... with "TimeYearHalfYearQuarterMonthDate" as the name of the DataSet.
I have a NT Group of users that need to connect to MSSQL db using integrated auth and run a stored proc. I have got this concept to work for individual windows users but not a group.
Does anyone have any ideas?
(Win XP, MSSQL 2000 SP3, Windows Group = "SQLUsers", member is "User2")
--- TSQL ---
USE master GO sp_grantlogin 'pcSQLUsers' GO sp_defaultdb 'pcSQLUsers', 'theDB' GO USE theDB GO sp_grantdbaccess 'pcSQLUsers', 'SQLUsers' GO GRANT EXECUTE ON [dbo].[uspThing] TO SQLUsers GO
-- Trying to connect with OSQL.EXE:
> osql -d theDB -E Login failed for user 'pcUser2'.
BUT.....
runing it for the individual user:
---TSQL
USE master GO sp_grantlogin 'pcUser2' GO sp_defaultdb 'pcUser2', 'theDB' GO USE theDB GO sp_grantdbaccess 'pcUser2', 'SQLUsers' GO GRANT EXECUTE ON [dbo].[uspThing] TO SQLUsers GO
---- now trying to connect with OSQL.EXE as User2:
Hi,What's the 'new' declarative way to fetch one field from a SQL table and display the result in a Label control?I have a users table with a fullname field. I want to query the table and retrieve the fullname where the usertable.username = Session("loggedinuser")I can make the SqlDataSource ok that has the correct Select query, but not sure how to bind the label to that.thanks,Bruce
I have a table having XML column. I want to read a XML document and insert content of the XML file into this xml column. CREATE TABLE [XMLTest]( [DataAsXML] [xml] NULL,
[CreatedDate] [datetime] NULL )
I have tried the following query declare @filepath varchar(100)
declare @filename varchar(100)
set @filename = 'Referred'
set @filepath = 'D:ReportOutput'+ @FileName +'.xml'
print @filepath
insert into XMLTest
SELECT xCol,getdate()
FROM (SELECT * FROM OPENROWSET
(BULK @filepath,SINGLE_BLOB) AS xCol) AS R(xCol)
Problem is that When I give complete file path for BULK instead of variable name i.e. BULK 'C:Test.xml', query runs fine. But when I try to use @filepath, I get error "Incorrect syntax near '@filepath'." What am I doing incorrect? Also,If some one can suggest a better approach to load content of XML document to table?
I've created a dataset with 27 measures and 20 query parameters. When attempting to load the report containing this dataset I'm shown the message;
'Document contains one or more extremely long lines of text. These lines will cause the editor to respond slowly when you open the file. Do you still want to open the file.'
If I do open the file it does indeed respond very slowly or even hangs.
I can manually format the XML code but amending the code in any way (i.e. using the layout designer to move a chart) removes my formatting and re-introduces the problem.
Are these an unreasonable amount of measures / parameters?
Environment; VS2005 v8.0.507 MSSQL 2005 9.00.1399.06 Build 3790 SP2 Windows Server 2003 SP2
Lest Say with File-stream we have a table document where the file-stream column is located, then we have another table called product-document where the productID and the Document-node are both foreign key of the Product and the Document tables respectively. if i want to query the file-stream document for a specific product, i can just join all three tables, but with file-table there is something i probably didn't get as how to query the file table and get a document for a specific product.
I am working the Books Online documentation for the full-text search feature of SQL Server 2005 Express Advanced and having a problem following the instructions.
I made sure to choose the "Full Text Search" option during installation of VB 2005 Express Advanced.
I downloaded, installed, and attached the AdventureWorks database successfully.
I checked to ensure that the database was enabled for full-text search, but could not follow the instructions for indexing a table within the database. Here are the instructions from Books Online: To enable a table for full-text indexing
Expand the server group, expand Databases, expand User Databases, and expand the database that contains the table you want to enable for full-text indexing.
Right-click the table that you want to enable for full-text indexing.
Select Full-Text index, and then click Enable Full-Text indexing.
Another document notes:
To create a full-text index on a table, the table must have a single, unique not null column. For example, consider a full-text index for the Document table in Adventure Works in which the DocumentID column is the primary key column.
When I right-click the Document table (Production.Document) in the AdventureWorks database, there is no option to "Select Full-Text Index" or "Enable Full Text indexing".
Am I missing something here?
How do I get the the table indexed for full text search?
I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.
I have someone who is sending me .htm documents, with a table in them, and I was wondering if there is a way to import the data from those tables into a SQL table, probably using an SSIS Package.
I do a clean install of SQL Server + RS + SP1 with standard setup on Windows Server 2003. I create a simple report (select * from aTable). This report (actually any report) shows the error message "For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method."
This has to do with security settings in Windows Server 2003. On Windows XP everything works fine.
Any help would be greatly appreciated. Thanks!
Edit: The reports do work in the preview tab in BIDS.
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
I keepo getting the following error while setting up MSDE: Setup failed to configure the server.Refer to server error logs and setup error logs for more information. Any ideas?
I am creating an image gallery system, where there is an admin andmultiple users upload images. Each user is restricted to uploading 8images. Currently, I have this hard coded into a trigger. I wouldlike it to use a table field instead... one that the admin can changeon the fly. I want to call this table Settings, but I want to createinsert 1 record, and then block all subsequent INSERT statements(there's only going to be 1 setting) so that the Settings table willonly have 1 record in it for its entire lifetime. What's the best wayto do this?
I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' Â values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) Â must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName          Clm ABC-X
X
Page2:
GroupName          Clm ABC-Y
Y
Page3:
GroupName          Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
Hello everyone,Small and (I think) very simple quesiton;-) which makes me creazy.Let's say I have two tables listed below:T1====IDX====134T2===============IDD fk_IDX===============A1A2A4B1B3B4C4D1D2D3D4I would like to select from table T2 all distinct records IDD whichhave all of fk_IDX containded in T1.The select statement should return in this case ONLY:B and Dbecasue:B has 1,3,4andD has 1,2,3,4 so it has this combination 1,3,4 contained in the T1also.I've tried to do that with group by, with having, in and it neverworks (I always became all records which one of them is in this T1table).Maybe some one from you did try something like that, and can give afast answer.I will be very greatfullGreatingsMateusz
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
I am using the Configure Publishing and Distribution Wizard in the SQL Server Enterprise Manager to configure a server as a Distribution and Publishing server. The security configuration on the server in question for authentication is SQL Server and Windows NT.
When I get to the first page in the wizard I select that I want to use the server as the Distributor. The other option is to use another server for the Distribution server - and this isn't what I want to do. The next page presents the option to use the default settings to configure the distribution databases or to configure the setup. If I select the default options I get the following error message when the arrow is pointing to Configuring Distributor:
---------------------------------------------- SQL Server Enterprise Manager could not configure 'SERVER1' as the Distributor for
'SERVER1'.
Error 18456: Login failed for user 'sa'. Remote logins for remote server 'repl_distributor' have been dropped. Server dropped. Server added. Server network name set.
----------------------------------------------
Something I have tried to change in order to fix this issue is the 'Replication agents on the Distributor log into the Publisher:' option from its default (By impersontating the SQL Agent account on 'SERVER1' (trusted connection)) to 'Using SQL Server Authentication of this account:', and in those fields I have put in 'sa' (which is a valid admin account to the SQL server) and the correct password.
In all cases I get the message above. Can anyone help me to see what I am doing wrong?
Hi I downloaded MSDE2005 and I tried to set up an ODBC connection to adatabase I created. I can see the database using client but I got thiserror through the ODBC manager[Microsoft][SQL Native Client]An error has occurred whileestablishing a connection to the server. When connecting toSQL Server 2005, this failure may be caused by the fact thatunder the default settings SQL Server does not allowremote connections.Can anyone, please tell me what I need to do to get this setup? I triedto dabble with the TCIP and remote setting but nothing worked.Regards
I am creating the report and setting the datasource(dataset) dynamically to the report. I want to set the parameters also dynamically. am using Report Viewer to process the report.
When i set the parameters locally, i am getting the below error: An error occurred during local report processing
Here is my code: da = new SqlDataAdapter(strqry, conn); ds = new DataSet(); da.Fill(ds);
ReportDataSource ReportDataSourceX = new ReportDataSource(); ReportDataSourceX.Value = ds.Tables[0]; ReportParameter[] parm = new ReportParameter[2];
parm[0] = new ReportParameter("Business_Function", "SQMO"); parm[1] = new ReportParameter("Application", "ETMRS"); parm[0] = new ReportParameter("Owner", "Subbu"); //parm[0] = new ReportParameter("Business_Function", ds.Tables[0].Columns["Business_Function"].ToString()); //parm[1] = new ReportParameter("Application", ds.Tables[0].Columns["Application"].ToString()); //parm[0] = new ReportParameter("Owner", ds.Tables[0].Columns["Owner"].ToString());
Msg 22538, Level 16, State 1, Procedure sp_MSrepl_check_job_access, Line 155
Only replication jobs or job schedules can be added, modified, dropped or viewed through replication stored procedures.
The rest of the script fails due to this line... Now, I am fair at SQL, but I am no DBA. I did some searching and found one post that seemed to have the same problem, and the gentleman solved it himself, but did not explain how lol.
I'm sure this is pretty basic for many folks, but how do I go about setting up and testing a Data Flow element's error output?
The intent is to set up flat file that'll contain the error output from elements on the Data Flow tab of an SSIS package. Later, I'd like to have the error output go to a SQL Server table so my DBAs have access to the errors.
There is no data transformation in this package -- it's very simple, just plain, delimited text to a 2-column SQL Server table.
Here's what I've done so far:
Set up a flat file destination to capture the error output. This flat file destination points to an empty file (C:ErrorDestination.txt) on my local machine.
Grabbed the "red" output from the Data Flow element (named "Source REGIONS"). This element is a flat file source, pointing to a file named Regions.txt. I was pleased to see that the connection manager for the error output was automatically populated with the 3 columns (Flat File Source Error Output Column, Error Code, and Error Column) when I clicked on the "New" connection button in the Flat File Destination Editor.
Changed the "Error Output" for the 2 columns in the flat file source to "Redirect Row" for both the Error and Truncation columns. I understand this instructs the source to send the error-causing rows to the error destination.
I ran the package to make sure nothing has changed how it operates under normal conditions.
But, when I introduce an obvious error into the source file (removing a quote surrounding data in one row) the package blows up on the Data Flow element in the Control Flow tab, the flat file source in the Data Flow tab turns red, but nothing flows to the error destination.
I truly expected the error on the flat file source to flow into the error destination on the data flow tab.
Any ideas? I appreciate any guidance or insight you might be able to give!
Sorry for the length of this post, but I wanted to make sure I've covered my bases.
