Error After Migrating Package From Development To Staging
Feb 7, 2007
I've migrated a package that has worked in our development environment. In both environments (dev & staging) I am in the BUILTIN/Administrators local group which is in the sysadmin server role.
In our staging environment, I execute DTEXEC command from the command line and get the following results.
D:Reporting>"D:Program FilesMicrosoft SQL Server90DTSBinnDTEXEC.EXE" /SQL "MSDBProcessReportingDatabase" /SERVER USFKL16DB1CI01 /MAXCONCURRENT " -1 " /
CHECKPOINTING OFF /REPORTING V /SET "Package.Variables[User::RunID].Value";65 /
SET "Package.Connections[RSAnalytics].InitialCatalog";"VR New Test 1 Dec28-FndPrj 1 Dec28"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:46:43 PM
Could not load package "MSDBProcessReportingDatabase" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Source:
Started: 1:46:43 PM
Finished: 1:47:02 PM
Elapsed: 18.797 seconds
In addition to my login, all logins that access this package are in the sysadmin role; and I have gone back and included these logins in msdb's dts_operator role. Has anyone seen this before?
Thanks - Dave
View 1 Replies
ADVERTISEMENT
Feb 27, 2007
Hi all,
I try to make SSSIS packages made on my pc accesible to an other user of SSIS (both running on Windows 2000). The packages are on a shared drive in our LAN.. Some configurationfiles are use to configure the Oracle DBconnection.The same files are on the same location on both PC's
The other user can open and run the packages but from the moment the lookup buffers are loaded, we get the following errors:
Error: 0xC0202009 at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "".
Error: 0xC020824E at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties.
Error: 0xC004701A at AB_ADDRESS_DF, DTS.Pipeline: component "LOOKUP_POST_ID" (22801) failed the pre-execute phase and returned error code 0xC020824E.
Any suggestion would be most welcome.
View 3 Replies
View Related
Nov 1, 2007
I have a SSIS package that runs fine when I execute it in visual studio but when I run it on the server as a job it fails. This is nothing to do with protection levels etc as the job is running. It fails part way through with this as the error log
Started: 2:42:48 PM
Progress: 2007-11-01 14:43:04.16 Source: Import Hon File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.16 Source: Import Hon File Validating: 50% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Hon File Validating: 100% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 50% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 100% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import MedFac File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.22 Sour... Process Exit Code 1. The step failed.
It is failing on the last file it is trying to import but it works OK on my PC.
Can anyone give me any pointers on what might be causing this.
Thanks
View 5 Replies
View Related
Apr 25, 2008
Having a difficult time setting up a development environment and a set of standards for SSIS package development.
First of all, you can't run the dataflow object "SQL Server Destination" in BIDS because BULKCOPY can only be run from the actual server. So how do you test/debug a package with this object in it?
Second of all, if you create an SSIS package on a developer computer in BIDS, and then import it into the SSIS package store on your development SQL server, you can't run the package from Management Studio on the developer PC. You get the error "DTS_E_PRODUCTLEVELTOLOW" when it tries to run any of the SSIS. Do I have to have SSIS installed on the developer client machine? How do I do that without installing a full server instance on each client machine (not to mention the licsense issues)?
Lastly, what protection level would you suggest using for production? We are having issues with ODBC connection passwords being decrypted and thus package steps failing in using "EncryptSensitiveWithUserKey". What exactly does this protection level do? Our network is physically very locked down, so we arent worried about SSIS package security too much, just looking for a way for them to work reliably without having to setup complicated security scenarios.
thanks for your time.
View 4 Replies
View Related
Jul 10, 2006
When I run a package I created in the development Studio it runs fine but if I create a job and run it I get an error "The AcquireConnection method call to the connection manager "ODS" failed with error code 0xC0202009"
I have the package setup to use a XML config file and it works fine on all the other packages but this one will not work.
View 6 Replies
View Related
Apr 6, 2006
Hi,
I have created a simple SSIS package in a 32-bit server and I'm able to execute it using dtexec command in the same server.I copied this package to the 64-bit machine and when try to execute the pacakge using dtexec /f <package path> ,it is giving me the following error
"The connection manager "10.101.24.230.master 1" will not acquire
a connection because the package OfflineMode property is TRUE. When the Offline
Mode is TRUE, connections cannot be acquired."
But in SSIS designer OfflineMode property for the package is by default set only to false but still I get this error in 64-bit.
Any help in this regard would be appreciated.
Thanks
SG
View 1 Replies
View Related
May 13, 2008
I have successfully used migrate wizard to migrate DTS pacakge to TrainingDTS.dtsx.
What should I do next? when I run
C:>dtexec /file "C:TrainingDTS.dtsx"
Error: 2008-05-13 09:14:31.36
Code: 0xC0029172
Source: File Transfer Protocol Task undefined FTP Task
Description: The connection is empty. Verify that a valid FTP connection is p
rovided.
End Error
Error: 2008-05-13 09:14:31.36
Code: 0xC0024107
Source: File Transfer Protocol Task undefined
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
View 2 Replies
View Related
Apr 4, 2006
Hi,
I have to create a migration package ..means package should migrate the sql server 2000 tables to 2005 tables (Not dealing with data at this point of time and ignoring SPs,DTS packages).But there are lot of normalisation ans schema changes in 2005 compared to 2000.Like,
- One 2000 table devided into 3-4 tables in 2005
- Lot of changes in the filed names
- Handling integrity relationship between the newversion tables
Being new to SSIS ,iam in confusion like how to start and where to start.can you pls tell me the steps(Structured way) i have to fallow
-- I have around 8-9 tables in 2000 ,I have to migrate them into 18-19 tables (with some new fileds )
-- For each table i have to create one package(bcoz lot of transformations are there) or I can create one package for all of those ? but the finally i have to handover one package to the client
pls ask me if u need any further info to come up with the explanation..bcoz iam not sure whether i provided enough info or not
Thanks for ur help
Niru
View 2 Replies
View Related
Apr 28, 2008
I applied the following info and created an SSIS package that allows COM control of Excel:
unable to add reference to Microsoft Excel in VSA
The package runs locally, and can be executed successfully after it is migrated to the server, but both of these processes use local memory space (I think). When I try to run the package via a job, it fails with the following error:
-------------------------------------------------------------------------------------------
Date 4/28/2008 10:34:04 AM
Log Job History (J_MSR_UHC_PC)
Step ID 1
Server SFA30229SQL003
Job Name J_MSR_UHC_PC
Step Name S_MSR_UHC_PC
Duration 00:00:05
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: ALEREsql_admin. ...on 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:34:04 AM Error: 2008-04-28 10:34:06.73 Code: 0xC001405F Source: Description: Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information. End Error Progress: 2008-04-28 10:34:09.34 Source: Data Flow Task Validating: 0% complete End Progress Error: 2008-04-28 10:34:09.45 Code: 0xC0202009 Source: msr_uhc_pc Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-04-28 10:34:09.45 Code: 0xC020801C Source: Data Flow Task... The package execution fa... The step failed.
----------------------------------------------------------------------------------------------
Microsoft.Office.Interop.Excel.dll has been added to the assembly directory.
Any ideas would be appreciated.
TruckeeBill
View 4 Replies
View Related
Sep 2, 2015
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
View 2 Replies
View Related
May 19, 2006
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio
------------------------------
Error creating package
------------------------------
ADDITIONAL INFORMATION:
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
BUTTONS:
OK
------------------------------
I found a similar post that suggested that they try the following:
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
But msxml6.dll could not be found.
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
My concern now is what is the likelyhood of this being the only file missing from the installation.
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
Thanks.
Marshall
View 12 Replies
View Related
Sep 24, 2007
I am using SQL Server 2005 Developer edition on Windows 2003 Server with SP1
I am getting the following error when try to execute SQL Server Business Intelligence Development Studio to create/configure Report Model:
"Microsoft Visual Studio
The Beta period is over
Thank you for your participation
You can remove Microsoft Visual Studio from your computer
OK"
Where this is installed from Visual studio installation or SQL server installation?
Because only vss is installed as visual studio 2005 installation in this computer(server)
Please help to sort out this problem
Muralidaran r
View 5 Replies
View Related
Nov 22, 2006
I'm having an issue with a development machine that has the RTM version of Vista installed on it. I get the same issue with every script component, regardless of what package it resides in.
The red "X" error that I get in the BI dev studio is:
Error 1 Validation error. My Data Flow Task: My Script Component [6313]: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) at Microsoft.VisualBasic.Vsa.VsaEngine.Compile() at Microsoft.SqlServer.VSAHosting.Runtime.LoadSource(String project) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent() MY SSIS Package.dtsx 0 0
When I try to execute the package, I get the following error:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at "All" Data Flow Task [YearMonth Math for Prior Year [3149]]: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at Microsoft.VisualBasic.Vsa.VsaEngine.Compile()
at Microsoft.SqlServer.VSAHosting.Runtime.LoadSource(String project)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent()
Error at "All" Data Flow Task [YearMonth Math for Prior Year [3149]]: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at Microsoft.VisualBasic.Vsa.VsaEngine.Compile()
at Microsoft.SqlServer.VSAHosting.Runtime.LoadSource(String project)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent()
Error at "All" Data Flow Task [DTS.Pipeline]: "component "YearMonth Math for Prior Year" (3149)" failed validation and returned validation status "VS_ISBROKEN".
Error at "All" Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at "All" Data Flow Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Other developers can open and execute this package fine. The only machine that can't is the Vista machine. Has anyone else had this issue with running BIDS on Vista?
View 6 Replies
View Related
Jun 23, 2006
Hello,
I'm trying to install the Business Intelligence Component ONLY of the Microsoft SQL Server 2005 Enterprise Edition. We are interested in only giving the BI Development Studio to a User to allow to create reports. The documentation makes it seems as if this is possible - am I wrong?
It allows me to walk through and select this component, and then it fails and I receive the following error:
There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=50000&EvtType=packageengine%5cinstallpackageaction.cpp%40InstallToolsAction.11%40sqls%3a%3aInstallPackageAction%3a%3aperform%400x643
When I followed the link and received "Sorry no additional information".
The System Requirements all meet - with the exception of the min. hardware I receive a warning message. Would this hault the execution?
Any help/advice would be appreciated.
Thanks!
View 5 Replies
View Related
Jul 21, 2006
I am migrating our reporting services from 2000 to 2005. I am following the instructions in http://msdn2.microsoft.com/en-us/library/ms143724.aspx. I am currently using the Report Server Configuration tool to restore the encryption key. I click "Restore", point to the backup that I created at the beginning of the process, enter the password, and the process begins. I get a check mark and a message saying "Restoring Encryption Key." The problem is that it never comes back from this. I let it run for over an hour and finally clicked one of the previous steps to abort this. I went back and started it over. Again, it has been running for over an hour. I get no errors; it just does not complete. How do I proceed? Thanks in advance for any assistance.
View 4 Replies
View Related
Sep 21, 2006
I'm trying to migrate MS Access 2003 query into SQL Server 2005 view.
I'm getting error for the following query.
ERROR: Incorrect syntax near the keyword 'LEFT'
MS-Access query:
SELECT tbl.*, tblP.ParticipantLastName, tblP.ParticipantFirstName, tblP.ParticipantAmount, tblP.SocialSecurityNumber, tblP.Comment
FROM tbl LEFT JOIN tblP ON tbl.AutoNumber = tblP.RecordNumber
WHERE ToBeProcessed='YES' and [Cancel]=0;
SQL Server View:
CREATE VIEW dbo.[qryReport]
AS
/*
* Generated by SQL Server Migration Assistant for Access.
* Contact accssma@microsoft.com or visit http://www.microsoft.com/sql/migration for more information.
*/
SELECT
tbl.*,
tblP.ParticipantLastName,
tblP.ParticipantFirstName,
tblP.ParticipantAmount,
tblP.SocialSecurityNumber,
tblP.Comment
FROM tbl AS LEFT
JOIN tblP ON tbl.AutoNumber = tblP.RecordNumber
WHERE (ToBeProcessed = 'YES' AND [Cancel] = 0)
View 10 Replies
View Related
Nov 26, 2015
When deploying a project from within a SSIS project in Visual Studio 2012 to SQL Server 2012 Integration services server I get the follwoing error message:
Failed to deploy project. For more information, query the operation_messages view for the operation identifier '10'. (Microsoft SQL Server, Error: 27203)
For the given operation id there is no entry in view catalog.operation_messages.
View 3 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Mar 4, 2008
Hi
My Server having DTS package even Job failing saying
"Error string: The specified DTS Package ('Name = 'ERP_Mater_Encript_Data_Move'; ID.VersionID = {[not specified]}.{T0I37w32-AB51-1SA4-9495-AcE6SSS4a321}') does not exist"
Please help regarding.
View 3 Replies
View Related
Jul 8, 2007
Hello,
I have a vb program that include a dts package that has been saved to vb with sql2000 dts wizard and works very good.
Now that I upgrade my website to sql2005, this vb dts package doesn't work.
The error I get is:
Microsoft Data Transformation Services (DTS) Package
Invalid STDGMEDIUM structure
(Microsoft Data Transformation Services (DTS) Package (80040066): Invalid STDGMEDIUM structure
) (Microsoft SQL-DMO (ODBC SQLState: 42000) (80004005): [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ')'.)
I searched in the internet how to make dts package in sql2005 and save it to vb and found no information about it.
What Can I do to get the vb code of the dts package I create in sql2005 or how do i migrage the sql2000 vb dts package code to sql2005?
Thanks,
Kubyustus
View 4 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
Dec 7, 2005
I've found staging tables to still be necessary (for example, when you have a large dimension table that you can't load into memory. The memory restricted lookup is too slow as it sends a query for each row). I have a few questions:
View 7 Replies
View Related
Apr 1, 2007
Hi Everybody,
I have made one simple application in asp.net 2.0 using VS 2005. I got following error
Server Error in '/[applicationname]' Application. --------------------------------------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
- When i got on my local machine i solved it by deleting sqlexpress directory from user's account and it was due to that I have installed VS 2005 on machine and by default it installs sql express with it.
- But I could not solved this error on my Development Server wherein there is no VS 2005. Only .Net framework 2.0 & 1.1 are there. My all other applications are running well.
So if any one have idea regarding the solution for this error then please reply me soon. It is very urgent.
Thanks to all of you.
Regards, Hardik B.
View 1 Replies
View Related
Jul 21, 2004
I have a database db1 on server1 and server2.The Db On server1 is a production db and the Db on server2 is a staging Db.All the new data will be coming into production Db.And i wanted to update the data and database structures on staging Db from production Db on weekly basis.So how can I reflect the data and datastructures on my staging Db from my production Db.
Thanks.
View 1 Replies
View Related
Mar 31, 2008
Hi Guys,
I'm trying to import the contents of a CSV file into a staging table that I've created in SQL server 2005. To perform the import I have used the BCP utility with the use of a BCP format file.
The problem I'm having is that the data in some of the fields in the csv file are longer than the length of the corresponding field in my staging table. So when I try to import I get the following error:
[Microsoft][ODBC SQL Server Driver]String data, right truncation
And the record with the error does not import.
My question would be, is there a way of telling BCP to trim the
data before importing into the staging table? Could I somehow
specify in the BCP file to trim the data before importing or
is there a switch that i can specify in the BCP command which tells BCP to trim data to the length of the destination column.
If it helps I'm using the command below to run BCP.
bcp S_OLTPDEV.dbo.CX_LOTS_STG in %path1%CTS_SiebelLotsTo_Siebel_From_CTSlotupdates.csv -f %path1%CTS_SiebelLotsTo_Siebel_From_CTSLots_Format.fmt -F 1 -S %dbsrvr% -U %duname% -P %dpasswd%
Thanks in advance, any help would be really appreciated.
View 3 Replies
View Related
Apr 4, 2008
Hi All
We are in SQL2005 . Is there anyone have SSIS package developed for automation of database refresh
Say we want to do weekly refresh prod to staging.
I want to use that as a model template for me to develop the package.
i would need one package for refresh one specific database
and one for user databases.
MOST IMPORTANT dev permission should be restored after production data sync on staging.
Secondly I want to create a job based on ssis package to run on schedule.
Thank you
View 7 Replies
View Related
Jan 3, 2007
I'm populating a table (B) in SQL Server from a Staging table (A) using a stored procedure.At any point of time, the Staging table holds 60 months' old data.In the first load of the destination table B, I get 13 months of old data whereas for every subsequent load,I need to load the data for the most recent month and delete data for the 1st(oldest) month. For example, if the load procedure runs on December 02,2006, it should pick data for the month of November,2006 from the Staging table and delete data for the 1st month.
I have a column DATA_MONTH_KEY in table B which maps to the column DATA_MONTH in my staging table A. I get the data for the first 13 months using:
(B.DATA_MONTH_KEY BETWEEN ( DATEADD(month,-13,@startdate)) AND @startdate) where startdate is the current date on which the procedure for populating table B is run. I get the value of startdate from a function.
How do i get data for the most recent months and delete the oldest month in subsequent loads?
Any help appreciated. Thanks.
View 7 Replies
View Related
Aug 25, 2005
Scenario:
We want to stage all data coming into our database from various
applications. We have a generic control where all data goes
through to get to the database.
We want have the data staged in a 'staging database'. My question
is, what would be the best way to store the staging database in the
database.
I'm thinking storing it as XML in a SQL column. The reason for
this is because the data could change from application to
application. It would be impossible to create a relational table
because maintenance would be a nightmare.
Has anyone ever done something like this. Would you save the node names in another table in SQL?
Any help would be appreciated as I'm new to XML.
Thanks,
ScAndal
View 1 Replies
View Related
Jul 16, 2007
We are in the process of setting up a shared staging/development enviroment in which multiple developers will deploy their packages for testing etc.
The plan is to allow the developers to remote in to execute their packages, but we are worried about the concurrency limit of 2 users per terminal services.
It is my understanding that you cannot execute packages remotely (ie you have to be on THAT box to kick it off. (FYI - we are not planning on using SQL Agent at this point - That will be with DBAs in UA)
Please let me know what options are available/best practices...
Thanks!
View 5 Replies
View Related
