Error Caused By Too Lengthy Search Term (string) Passed To CONTAINS Predicate
Nov 14, 2007
Hi, I test the following sql statement, finding that an error ocurs:
Msg 7630, Level 15, State 2, Line 3
Syntax error near '"' in the full-text search condition '"dsg SDRGDG " OR "sdfsdfsdfsdafdsafdsfds'.
DECLARE @searchTerm NVARCHAR(40)
SET @searchTerm = '"dsg SDRGDG " OR "sdfsdfsdfsdafdsafdsfdsafdsafdsafsafdfdsafdf"';
SELECT [JobTitle], [JobDes], [OpenDate], j.[URLRef], c.[CompanyName], c.[URLRef], c.[URLSource]
FROM JobWanted AS j INNER JOIN
Company AS c ON c.CompanyID = j.CompanyID
WHERE CONTAINS((JobTitle, JobDes), @searchTerm)
It seems too lengthy string will cause an error for full-text engine. I find the sdfsdfsdfsdafdsafdsfdsafdsafdsafsafdfdsafdf is truncated as shown in error message.
How to avoid this issue? Could I configre this limination?
Although this SP intends to sorround a search text in double quotes, it seems that when called from Management Studio it throws a Syntax Error even before entering the SP.
createproc fts(@t nvarchar(1000)=null) as begin
select @t = '"' + @t + '"'
select @t
select * from dbo.products where CONTAINS(name, @t)
end
GO
exec fts @t = 'my product name'
GO
Msg 7630, Level 15, State 3, Procedure fts, Line 4
Syntax error near 'product' in the full-text search condition 'my product name'.
-------------------------
If I pass the string in double quotes I get a different error:
exec fts @t = '"my product name"'
Go
Msg 7630, Level 15, State 3, Procedure fts, Line 4
Syntax error near 'my' in the full-text search condition '""my product name""'.
Now, if I remove the quotes again and make the original call:
I have a report in SQL that passes parameters at runtime entered by the user for two date ranges (beginning and ending). I'm trying to write a formula that will print a specific field *only if* the specified date range entered by the user is BETWEEN a specific value (like 200401). This is kind of reverse of a normal WHERE, BETWEEN clause.
I tried a standard BETWEEN predicate in my WHERE clause like: IF '200401' BETWEEN ?BegPer and ?EndPer then salesanal.ptdbud01 else 0
But, it's returning an error that my Then statement is missing. I can't use a normal statement like 'IF ?BegPer >= '200401' and ?EndPer <= '200401', then.....' because users could enter a RANGE of periods, so it would be difficult to code all of the possible combinations this way. I'm actually doing this in Crystal, but if someone can give me a standard MSSQL example, I can translate that over to Crystal.
exec sp_SearchProductAdvanced "(name LIKE '%a%' Or name LIKE '%b%' Or name LIKE '%c%' Or name LIKE '%d%' Or name LIKE '%e%' Or name LIKE '%f%')and (salesprice between 3 and 10) ",null
after executing i got this error:
The identifier that starts with '(name LIKE '%a%' Or name LIKE '%b%' Or name LIKE '%c%' Or name LIKE '%d%' Or name LIKE '%e%' Or name LIKE '%f%')and (salesprice ' is too long. Maximum length is 128.
how can i solve this problem. so that i can use more values .
my lenght exceeds 128. is there any way to get rid of this.
in my SP i have declared the parameter variable as
Hi everybody, I have a problem using the CONTAINS predicate. I use the contains predicate in a web page that students utilize to look for dissertations stored in a database (MS 2000) of the library. The search is one big textbox where students can perform any type of reaserch. For instance, they can insert the author, the title or few keywords of a dissertation. After they have clicked on the button Submit, the words that they have inserted are filtered and combined (with AND) in one string: Example: miami, education --> 'Miami AND Education'
An example of the query that I need to perfrom is the Query Number 1:
select docnumber,Title
FROM [Log].[dbo].[DocTable1]
where contains(SearchColumn,'miami AND education') order by docnumber
SearchColumn is a field (varchar) that is the concatenation of various fields such as Location, Title, Author, etc... that are contained in the same table (See below for the description of the Table DocTable1).
I'm currently testing the search and I have figured out that the query described above does not work. For example, the query should produce the same resultsof the following one, but it does not:
select docnumber FROM [Log].[dbo].[DocTable1] where contains(Location,'miami') AND contains(Keywords,'education') order by docnumber
I need to implement the first query, but i can not understand why it does not produce the same results of the second one. Any Ideas?
I have a field called URL in my table. I want to get the SEARCH TERM from a given URL and create a report based on that information. I'm getting difficulties, because the URL have different format depending up on the search engine that the users use to browse. Some of the search engines are "google",".excite.com", "search.msn.","search.netscape", "search.lycos", "altavista", "search.yahoo" and many more.
Examples of the URLs from google :
http://www.google.com/search?q=S26+Collet+Chuck&hl=en&client=firefox-a&rls=org.mozilla:en-USfficial&start=30&sa=N -- The search term is S26 Collet Chuck http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLG,GGLG:2006-02,GGLG:en&q=kt21+kia -- The search term is kt21 kia http://www.google.com/search?hl=en&q=Slagger+burning+Tables -- The search term is Slagger burning Tables
Does anybody have a sql query or used a CLR functions to get the SEARCH TERM from different search engine (URL).
I'd like to get some ideas for the following: I am writing a quick mini-application that searches for records in a database, which is easy enough. However, if the search term comes up empty, I need to return 10 records before the positon the search term would be in if it existed, and 10 records after. (Obviously the results are ordered on the search term column) So for example, if I am searching on "Microsoft", and it doesn't exist in my table, I need to return the 10 records that come before Microsoft alphabetically, and then the 10 that come after it. I have a SP that does this, but it is pretty messy and I'd like to see if anyone else had some ideas that might be better. Thanks!
hi, I have a question regarding calling sql table columns dynamically? workflow would go as:1. user enters search term into a textbox2. user checks a checkbox to search by column in sqldb (eg.. firstname or surname) pseudo sql would go like......SELECT +%column1(checkbox1.value)%+ OR +%column2(checkbox2.value)%+ OR +%column3(checkbox3.value)%+WHERE column1 = +%TextBox.Text%+ OR column2 = +%TextBox.Text%+ 3. display results in gridview my sql needs to improve greatly so any code insight(good book or link) would be terrific . thanks
Hello, I want to search a column with all the words deliminate by underscore. E.g. User_id, Community_name, author_id and etc. It seems like freetext only deal with string with blank deliminator. How should I do the rull text search on column like this? Here is the code.declare @var varchar(2000) set @var = 'id' select [name], definition,version_code from dbo.base where freetext([name],@var) thx
SQL Server Data Mining comes with "Term extraction" and "Term Lookup" for phrase detection. Rather than using the GUI tool, how to utilize these two features in coding? Please assist! Thanks!
I am designing a ssis package,This is intends to mine text data(Data extracted from websites). Term lookup/Term extraction has been used as tools for mining. I have lookup terms defined with me for reference table,but the main problem lie in extracting the nearby text/number/charcters to these lookup terms during mining. For example : I found noun "Email" 200 (frequency score) times in my text,Now I want to extract nearby email address(this is also true for PhoneNumber,Address attributes also).so how can I achieve this with SSIS. If u have some idea/suggestion to carry out this challenge with or without Term Extraction/Term Lookup,plz do write here.
I have a requirement where, I need to get the value of parameter from a query string of url and use it in my report. Ex:- http://www.mysite.com?name=bobby
From the above url, I have to take the value of name and be able to use it in my report query or assign to a parameter.
I have been attempting to build a search engine that searches a database full of invoices. The user will enter in a invoice number and then the results will be returned if the exact invoice exists and if the record belongs to the user. My first attempt has involved the use of a SQL Datasource to pass a stored procedure based on what is in the search textbox and the information in the cookie about the user. I was hoping that on the btnsearch.click event that I could somehow return the stored procedure in the SQL DataSource. My next step was to make the result (if exists) part of the query string like this: Response.Redirect("~/Invoice.aspx?Invoice=?"+ SQLRETURNEDVALUE)
I'm looking for any help to a possible way to use my idea or any other ideas to get a invoice number and place it into a query string so that the result can be fetched on the next page. Thanks
THIS IS THE ONE.TXT FILE Customer called to complain that the ice maker on her fridge has stopped working model XXYY-3 Door to refrigerator is coming off model XX-1 Ice maker is making a funny noise XXYY-3 Handle on fridge falling off model XXZ-1 Freezer is not getting cold enough XX-1 Ice maker grinding sound fredge XXYY-3 Customer asking how to get the ice maker to work model XXYY-3 Customer complaining about dent in side panel model XXZ-1 Dent in model XXZ-1 Customer wants to exchange because of dent in door model XXZ-1 Handle is wiggling model XXZ-1 Customer happy with us. Best fridge yet!
i created the table term_result(term_id varchar2(50)); ( termid ==xxyy-3 like)
now i want to find the no of times repeat the xxyy-3 posted queries
ERROR : DT_NTXT OR DT_WSTR TYPES ONLY ALLOWS HERE ERROR I AM GETTING SO
Flat File Source-----------> Data Conversion --------->Term Lookup -------->Oledb data source one.txt DT_stR I choosen error occur here
SO WHAT IS THE DATA TYPE I HAVE TO GIVE FOR THAT MATCHING LOOKUP
Using a string of IDs passed into a stored procedure as a VARCHAR parameter ('1,2,100,1020,') in an IN without parsing the list to a temp table or table variable. Here's the situation, I've got a stored procedure that is called all the time. It's working with some larger tables (100+ Million rows). The procedure passes in as one of the variables a list of IDs for the large table. This list can have anywhere from 1 to ~100 IDs passed to it.
Currently, we are using a function to parse the list of IDs into a temp table then joining the temp table to get the query:
CREATE PROCEDURE [dbo].[GetStuff] ( @IdList varchar(max) ) AS SET NOCOUNT ON SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] .....
The problem we're running into is that since this proc gets called so often, we sometimes run into tempDB contention that slows this down. In my testing (unfortunately I don't have a good way of generating a production load) swapping the #table for an @table didn't make any difference which makes sense to me given that they are both allocated in the tempDB. One approach that I tried was that since the SELECT query is pretty simple, I moved it to dynamic SQL:
CREATE PROCEDURE [dbo].[GetStuff] ( @IdList varchar(max) ) AS SET NOCOUNT ON SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] ....
The problem I had there, is that it creates an Ad Hoc plan for the query and only reuses it if the same list of parameters are passed in, so I get a higher CPU cost because it compiles a plan and it also causes the plan cache to bloat since the parameter list is almost always different. Is there an approach that I haven't considered that may get the best of both worlds, avoiding or minimizing tempDB contention but also not having to compile a new plan every time the proc is run?
I am getting error Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. StackTrace> at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at Galileo.Modules.Data.DBDeclare.RunProcedure(String sp, IDataParameter[] parameters) at GalileoModules.Data.PrivateAccomodation.Search3.Query(String[] values
Does anyone know of any SQL errors that will stop the SQLserve.exe service? I meant the error didn't hang the SQL server service, it stopped the service (from green light to red light).
Can somebody guive me alittle guidance in how to make this? I have like 4 lookups but some can throw errors, and I need to know what happened when I go to the office in the moorning.
My program use the mutil-threads, each thread would use AppendChunk to insert a binary file into sqlserver. But program always stopped exceptionally , But I can not catch any exception. It looks like be killed by someone or system.
I have a scenario where in I need to use a comma delimited string as input. And search the tables with each and every string in the comma delimited string.
I am trying to import a fixed width file where some of the numeric columns are empty. The columns in question are defined as integer columns (of varying sizes) and I am guessing that "empty" columns come across as multiple spaces on the import.
Even though I have "Retain null values from source" checked off, I am still receiving the following error on these empty columns:
Error: 0xC02020A1 at Input Data, Flat File Source [1]: Data conversion failed. The data conversion for column "ToContractExpiryYear" returned status value 2 and status text "The value could not be converted because of a potential loss of data.". Error: 0xC0209029 at Input Data, Flat File Source [1]: The "output column "ToContractExpiryYear" (51)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "ToContractExpiryYear" (51)" specifies failure on error. An error occurred on the specified object of the specified component. Error: 0xC0202092 at Input Data, Flat File Source [1]: An error occurred while processing file "\Nastinus-01ClearingDataOCC20060320ser2mst.20060317" on data row 1.
If it is truly the system treating the column as spaces (and not trimming the value), then the only solution I can think off is to source everything as strings, perform a transform that executes a Trim() (Derived Column or Script ??), THEN perform a transform that converts data types, then do whatever else I need...
Am I missing something? Is this the correct solution?
I wanted to prevent ntbackup from locking my databases during the nightly backup, so I excluded the ...Data folder from the backup set. However, I think that ntbackup is backing up the databases during the volume shadow copy phase of the backup, even though their folder was excluded from the backup set (I verified this setting in the .bks file). Although the lock only lasts a few seconds, the error message is worrisome and I would prefer to skip the databases completely. How can I stop the volume shadow copy from doing this?
Below is the the sequence of events leading up to the error, most recent first:
Event Type: Error Event Source: SQLVDI Event Category: None Event ID: 1 Date: 3/23/2007 Time: 3:01:49 AM Description: SQLVDI: Loc=CVDS::Cleanup. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. . Process=8684. Thread=7556. Client. Instance=. VD=.
Event Type: Information Event Source: MSSQLSERVER Event Category: (6) Event ID: 18264 Date: 3/23/2007 Time: 3:01:48 AM Description: Database backed up. Database: master, creation date(time): 2007/03/12(15:08:23), pages dumped: 1, first LSN: 268:352:37, last LSN: 269:24:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{66DC3082-FB76-4312-AD74-4BDAD9FC7209}1'}). This is an informational message only. No user action is required.
Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 3198 Date: 3/23/2007 Time: 3:01:47 AM Description: I/O was resumed on database master. No user action is required.
Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 3197 Date: 3/23/2007 Time: 3:01:45 AM Description: I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
hi , what is the definition and difference between predicate and residual predicate. give me some examples..Basically the columns used in where clause are called as predicates. Am i right.
Hi.I have an ancient preCambrian app that uses the db library to interface withsql server databases.It is written in c++.When testing it I noticed on one machine with sql server 2005 installed itruns fine, but on another it has some problems, notably.. it gets as a resultof a select statement with an order by clause the error:only fully keyset ddriven cursors can have 'order by', 'group by', or 'having'phrases.Error code 10080Can someone suggest a 'configuration' parameter that might be causing theotherwise identical systems to have this problem on one machine and not theother?ThanksJeffthanksJeffJeff Kish
I have a report which has the Interactive Height set to 0 so that it does not use paging. When I try and print preview the report, I can see the report okay until I go forward after the last page, and then I get the error "An error occured trying to render the report. 0x80004005". I can print the report and it prints fine, but I get a pop-up that says that there was an error printing the report. I've narrowed it down to the interactive size property, but am not sure how to get around it.
At my job is a dts package that is failing in SQL 2005. I am not a SQLexpert. I am just trying to fix. I put the query in Query Analyzerand get this error:(4322 row(s) affected)Server: Msg 535, Level 16, State 1, Line 1Difference of two datetime columns caused overflow at runtime.I am just trying to understand what this means, what I should belooking for and what could be wrong. Here is the query:SELECT i.SerialNumber, '' AS mac_number, DATEDIFF([second], 'Jan 1,1970', s.DateOrdered) AS Support_StartDt, DATEDIFF([second], 'Jan 1,1970',s.Warranty_Enddate) AS Support_EndDt,DATEDIFF([second], 'Jan 1, 1970', c.Registration_Date) ASRegistration_Date, c.FirstName AS enduser_fname,c.LastName AS enduser_lname, c.CompanyName ASenduser_companyname, c.ContactEmail AS enduser_email, c.Address ASenduser_address1,c.Address2 AS enduser_address2, c.City ASenduser_city, c.State AS enduser_state, c.Zip AS enduser_zip,c.WorkPhone AS enduser_phone,c.Fax AS enduser_fax, d.DealerName ASdealer_companyname, d.ContactFirstName AS dealer_fname,d.ContactLastName AS dealer_name,d.Address1 AS dealer_address, d.City ASdealer_city, d.State AS dealer_state, d.Zip AS dealer_zip,d.ContactPhone AS dealer_phone,d.ContactFax AS dealer_fax,ISNULL(SUBSTRING(p.ProductName, 11, LEN(p.ProductName) - 10), 'unknownIWP product') AS product_type, '' AS extra1,'' AS extra2, '' AS extra3, '' AS extra4, '' ASextra5, '' AS extra6, '' AS extra7FROM tblInventory i full outer JOINtblDealers d ON i.DealerID = d.DealerID fullOUTER JOINtblSupport s ON i.InventoryID = s.InventoryIDfull outer JOINtblCustomers c ON s.InventoryID = c.InventoryIDLEFT OUTER JOINtblProducts p ON LEFT(i.SerialNumber,PATINDEX('%-%', i.SerialNumber)) = p.SerialPrefixWHERE i.SerialNumber <> ''Any ideas would be greatly appreciated.
I am working on report where I am using a table to disply my data.There is a column called "Control Description" , data for this column can be of max 300 characters. And my report is pretty big it has 22 coulmns so each column's size is very less. Right now height of the cell is increasing to display the whole 300 char text it looks very odd.
I want to know if this is possible? when the report is displayed to user I can only show portion of the text in the tabel's cell and if user wants to see the whole thing he/she can click on it(or roll over mouse on it) and it would display entire text?
