I am having problems connecting to my SQL Server instance with Management Studio; basically the setup is as follows;
*Single server running windows 2003 enterprise - in a workgroup not domain
*SQL Server is installed on this machine
*When I try and connect from the same machine using its own IP address and Windows authentication I get the 18452 error "login failed for {NULL} user"
I am testing it like this because Sharepoint is failing in configuration wizard because it is connecting the same way - at least the login failure audit logs say the same.
I have had SQL express installed and working ok, however, I can no longer connect
OS: XP sp2.0
.net installed ver1.1 .. 2.0 sp1, 3.0sp1 and 3.5
The install of SQL was using the SQLEXR_adv download
I have removed SQL and all associated applications folders and windows SQL services
I have re-installed many times but always receive the same issue.
I re-built the .net 2.0
The issue I have is when I try and connect form my applications or with Express sql management studio I receive the following error:
It looks like a .net2.0 issue
TITLE: Connect to Server ------------------------------ Cannot connect to RNASHLTOPSQLEXPRESS. ------------------------------ ADDITIONAL INFORMATION: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters' threw an exception. (System.Data) ------------------------------ Configuration system failed to initialize (System.Configuration) ------------------------------ Unrecognized configuration section system.serviceModel. (C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config line 136) (System.Configuration) ------------------------------ BUTTONS: OK ------------------------------
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
I have 4 named instances of SQL 2005 running on one of our sales server (dont ask me why I have 4 instances.Its a beefy box btw). All the instances have SSIS Packages (around 6-7 in each instance) saved to the SQL server and not to the file system. The issue is every time i need to look at the packages or export the packages from SSMS I have to edit the MsDtsSrvr.ini.xml and type in the named instance name within the <ServerName></ServerName> tag . I then have to restart my SSIS. I dont see an easier approach to this method.
This is causing me a lot of unnecessary time waste. is there anyway this can be automated where in i can pass the instance name dynamically to the ini file or even more best, can I have all the instance names in the ini file and some how look at the packages in each Instance. I am not sure how having all the instance names in the ini file woud resolve the issue though.
I know I can use BIDS which is much more flexible and a recommended approach but need a solution for looking at SSIS packages through SSMS in all of the 4 instances. I look forward to recommendations from anyone who have better ideas and suggestions.
I use visual studio express 2005, and just downloaded Management Studio Express. (I have SQL Express). I've already created my projects and created database tables and everything but I do not know how to connect an existing database to management studio. Can someone tell me how to connect an existing database to management studio? Thanks, Computergirl
I have a sql server 2005 remotely, need to connect from client using sql management studio. I am unable to connect from one of the client machine and able to connect from different machine.
The tcp/ip, named pipes and sql browser is enabled in (sscm)server and windows firewall is off in client.
I am getting (provider: sql network interfaces, error 26 - error locating server/instance specified)
I am trying to connect to a sql server 2005 server using either the SQL Server Management Studio program using either windows auth or sql server auth but I can not. When I click on the connect button to connect to a server it never connects. I can not cancel once I press connect. It never times out after I press connect. I removed all registered servers that were registered previously. I have uninstalled all software that involved sql server (and sql2000) run a registry cleaner(not microsofts), installed the software to a new directory and still I can not connect to the sql2005 server (the only db).
I tested the connection from my machine to the production database system using osql and it worked fine. I registered the server tested the connection (using the management studio) and it tested fine. When I try to connect to the database engine it does not work.
When I had another user login to my machine and launch the SQL Server Management Studio I noticied that it ran a configuration utility for first use. When I uninstalled the SQL Server Management Studio on my machine it never came up again. Is there any way that I can get the configuration utility to run again on my account?
Hi all, I got this problem which makes me struggle in the last few days. I am able to connect to my local server using a query analyzer or calling sql commands in a window application, but there's no way I can access it in Management Studio: by clicking "Connect" it just waits forever, and it doesn't respond to any other command (it must be shut by terminating the process) Got any hints?
Is there a way to connect to database using Windows authentication as a different user than what you've logged in with to your desktop?
For example:
I log on to my desktop as mydomainme. I'm developing queries using Management Studio against a database (on another server) where mydomainme doesn't have access, but the admins have granted access to mydomainJobs1. I have the password for mydomainJobs1, and I'm hoping I can connect to the database using that account without having to log-off my local desktop as mydomainme and then re-login using mydomainJobs1.
The analogy in the file/share-permissions world would be using "net use" from a command prompt:
net use \SomeServer /User:mydomainJobs1 jobs1password
Hi all, I want to do SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express and I have read the following articles and books: (i) Connecting to SQL Express User Instances in Management Studio in http://blogs.msdn.com/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-insta... (ii) Managing SQL Server Express with SQL Server 2005 Management Studio Express Edition in http://www.microsoft.com/technet/sql/2005/mgsqlexpwssmse.mspx (iii) Chapter 16 - Going Beyand Transact-SQL: Using the SQL Common Language Rutime (SQLCLR) in Microsoft SQL Server 2005 Express Edition for Dummies (iv) Chapter 21 - Working with the Common Language Runtime in Microsft SQL Server 2005 Programming for Dummies (v) Chapter 4 - Introduction to Common Language Runtime (CLR) Integration in Programming SQL Server 2005 by Bill Hamilton. I want to create an SQLCLR project "HelloWorld" by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. But I am still not sure how to get it started, because I do not understand the following things: (1) Pipe Name for a User Instance, (2) Enabling (or Disabling) the CLR by using Transact-SQL, (3) Creating a Transact-SQL script, (4) Creating an Assembly, (5) Creating a backup device, etc. I need to see some simple examples of SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. Please help and tell me where in the websites I can find them.
Really confused ... I created 2 tables in a VB Express program (which went well). Problem is that I can't see/find those tables with MSME. I don't really understand how to connect the MSME to where the tables are. I created the tables under My DocumentsData and they are DBapp.mdf + DBapp_log.LDF and the tables are Items and Preferences. The VB application can "see" the tables OK.
Do I need to move the tables to C:Program FilesMicrosoft SQL ServerMSQL.1MSQLDATA (like the Adventureworks installation which I haven't done) or what?
When I connect using SQL SERVER MANAGEMENT STUDION, i get following error:
The type initializer for 'AsyncWmiBinding' threw an exception. (Object Explorer) Additional Information: unable to load 'sqltoolsvsnativehelpers.dll': Access is denied. (Exception from HRESULT: 0x80070005(E_ACCESSDENIED))(Object Explorer)
When executing export data task and through the wizard to include column names within a flat file desitination and get the following error listed below. If you uncheck the box and don't include the column names it works correctly.
Error
- Pre-execute (Error)
Messages
Information 0x402090dc: Data Flow Task: The processing of file "C:Documents and Settings*Desktop est_2.txt" has started.
(SQL Server Import and Export Wizard)
Error 0xc0202095: Data Flow Task: Failed to write out column name for column "ClientSubGroupID".
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - test_2_txt" (22) failed the pre-execute phase and returned error code 0xC0202095.
I am getting the following error when I try to start SQL 2005 Management Studio to manage my SQL Server : Cannot load the DLL xpstar.dll, or one of the DLLs it references. Reason: 126(The specified module could not be found.).
I'm trying to run the disk usage reports from the SQL Server Management Studio and I'm getting an error. I right-click on a database, go to Reports, then Standard Reports and select Disk Usage by Table. I get the error below. Can anyone help?
===================================
Object reference not set to an instance of an object. (System.Xml)
------------------------------ Program Location:
at System.Xml.XmlReader.CalcBufferSize(Stream input) at System.Xml.XmlTextReaderImpl.InitStreamInput(Uri baseUri, String baseUriStr, Stream stream, Byte[] bytes, Int32 byteCount, Encoding encoding) at System.Xml.XmlTextReaderImpl..ctor(String url, Stream input, XmlNameTable nt) at System.Xml.XmlDocument.Load(Stream inStream) at Microsoft.SqlServer.Management.Reports.StandardReport.LoadRdlDocument() at Microsoft.SqlServer.Management.Reports.Report.LoadReportQueriesFromRdl() at Microsoft.SqlServer.Management.Reports.StandardReportFactory.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.ShowReport(ReportInfo reportInfo)
Hi, I'm still getting error 2908 while installing the SQL Server Management Studio Express. The file downloads, I run it and it goes through the setup wizard. It gets almost all the way through the installation and then gets this error. The complete message is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The install then rolls back. Any suggestions?
Product: Microsoft SQL Server Management Studio Express -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The arguments are: {2AC4F9E9-0BFA-4CAC-BA2E-D089C63637F5}, ,
Product: Microsoft SQL Server Management Studio Express -- Error 1935. An error occurred during the installation of assembly 'Microsoft.ReportViewer.WebForms,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.50727.42",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {B68B643F-A989-4510-9D98-0B2385E85ADF}
Hi, I'm getting error 2908 while installing the SQL Server Management Studio Express. The file downloads, I run it and it goes through the setup wizard. It gets almost all the way through the installation and then gets this error. The complete message is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The install then rolls back. Any suggestions?
Here's the errors that are getting generated in the application log
Product: Microsoft SQL Server Management Studio Express -- Error 1935. An error occurred during the installation of assembly 'Microsoft.ReportViewer.WebForms,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.50727.42",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {B68B643F-A989-4510-9D98-0B2385E85ADF}
Product: Microsoft SQL Server Management Studio Express -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The arguments are: {2AC4F9E9-0BFA-4CAC-BA2E-D089C63637F5}, ,
I have found a similar problem in Google but that thread doesn't have any conclusion. So that I wish a new thread can help solve this problem ultimately.http://forums.asp.net/rss.aspx?ForumID=54&PostID=1600414Problem description:TableAdapter will raise timeout exception when I try to execute a SQL containing subquery and grouping. However, if the same SQL is executed in SQL Server Management Studio. The response time is always less than 1 second.Solution provided in previous link:Increase the timeout setting of the command - I think this is not the solution. As the default timeout should be 15 seconds, how could it get a timeout error if it execute a SQL supposed to be finished within a second?I have encountered similar problem before. However, I can't remember the exact detail. My solution for that moment seems to be using join instead of subquery in the SQL. Unluckily, this trick does not work this time.Please provide any other suggestion. Thanks in advance.
I have some strange error trying to connect to Reporting Services.
At the beginning I was suspecting some accounts issues.
But after checking all the accounts under wich ASP.NET, SQL SERVER, Reporting Services are running I don't even know what to think.
After searching internet for answers the only similar problems' solutions were remove RS and install it again.
Have anybody here had this problem? Can you just fix something without reinstalling RS? The error is:
Object reference not set to an instance of an object
------------------------------ Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString) at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject() at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
Hello, I am facing a very odd behavior with SQL server 2005. I have a database role with specific permissions to execute only some of the stored procedures in the database. I also have a SQL login/user attached to the role.
If I execute one of the stored procedures from the application (web application, with Microsoft enterprise library database block) I am getting a security error stating that I need select permission for the schema. However, If I execute the same sp with the same parameters from SQL management studio, connecting with the same SQL login as in the application I can execute the sp without any security errors. The SQL management studio is in on a different server than the targeted database.
Are there any differences between executing stored procedures from SQL MS and from application when using the same SQL login?
When launching Microsfot SQL Server Management Studio Express, I get a Popup Error box (!) without any text. After pressing the OK button, everything seems to work fine. Any ideas as to what it's trying to tell me?
I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB. When I execute the package from the BIDS it execute succesfully. However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error:
the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter.
Yesterday I successfully installed Microsoft Visual Basic 2005 Express Edition which included SQL Server 2005 Express. Today I noticed I needed to download the Management Studio seperate download. I downloaded SQLServer2005_SSMSEE.msi and executed it and get the following error:
Error reading from file C:...SQLServer2005_SSMSEE.msi. Verify that the file exists and that you can access it..
Solved my own problem. Once I moved the msi to C: the installation worked. Apparently the path it was in was too long causing it to be unreadable. c:xxxxxxxxSQLServer2005_SSMSEE.msiSQLServer2005_SSMSEE.msi.
I encounter this error when importing SSIS packages using SQL Server Management Studio:
=================================== Unable to cast object of type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction' to type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ISimpleAction'. (Microsoft.SqlServer.DtsObjectExplorerUI) ------------------------------ Program Location: at Microsoft.SqlServer.Dts.ObjectExplorerUI.DtsServerMenuItem.Invoke(INodeInformation parent, String mode, String assembly, String type)
The Integration Services that I'm using has just been rebuilt due to problems after installing SP2. I'm using Integration Services 9.0.3042. I can't find anything having this same problem. Any help will be appreciated.
tried to attach a database in sse-ms, and for some reason the database name is changing to G:someFoldersomeFolderdb.mdf, even tho i dont have a drive g:,
during "attach as" screens inside sse-ms, , ie attach>add> then select the database the mdf loction is what it is suppose to be ie C:inetpubwwwrootapp_datachp11wroxunited.mdf but the database name in the same screen shot is G:someOtherFolderAndPathwroxunited.mdf and the attach as is also the G:someOtherFolderAndPathwroxunited.mdf.
Hello i constructed the following query in SQL management studio and it runs fine, exactly how i want it to. However when i run it in my code behind i get the error: 'Too many characters in character literal' I desperatly need to use this query exactly how it displays in the mangement tool - why wont it work the same in my code behind? (I am using c# in my code behind and binding the results of the query to a gridview) Regards "SELECT DISTINCT (dbo.AuthorList(publicationID))+ ';' + ISNULL(' Editor: '+Publication.editor, '')+ '' + ISNULL(' "'+Publication.title+'"', '')+ '' + ISNULL(' Book: "'+Publication.booktitle+'"', '')+ '' + ISNULL(' '+Publication.type, '')+ '' + ISNULL(' '+Publication.journal, '')+ '' + ISNULL(' Series: '+Publication.series+'.', '')+ '' + ISNULL(' '+Publication.school, '')+ '' + ISNULL(' '+Publication.institution, '')+ '' + ISNULL(' '+Publication.organisation, '')+ '' + ISNULL(' '+Publication.month, '')+ '' + ISNULL(' ('+convert(nvarchar, Publication.year)+')', '')+ '' + ISNULL(' '+Publication.publisher, '')+ '' + ISNULL(' '+Publication.address+'.', '')+ '' + ISNULL(' '+Publication.howpublished, '')+ '' + ISNULL(' Ed: '+convert(nvarchar, Publication.edition)+'.', '')+ '' + ISNULL(' '+Publication.note, '')+ '' + ISNULL(' Vol:'+Publication.volume+'.', '')+ '' + ISNULL(' No:'+Publication.number+'.', '')+ '' + ISNULL(' Pages:'+Publication.pages+'.', '')+ '' + ISNULL(' Chapter:'+Publication.chapter+'.', '') AS SingleColumn, Publication.publicationID FROM Publication;"
I have Vista Ultimate (IIS Enabled), SQL Server 2005 Developer Edition (downloaded and ran the SP2 Update), Visual Studio 2008. VS2008 installs no problem. When I install SQL Server 2005, I get an error when it trys to install the last part( Workstation Components, Management Studio, etc). I have tried FULLY, MANUALLY removing all SQL products and registry entries. I have used Windows Installer Cleanup Utility. I have tried Microsoft's recommended way of manually removing SQL Server 2005. If I manually run SqlRun_Tools.msi the error comes up right away.
The error is: "A component that you have specified in the ADD_LOCAL property is already installed. To upgrade the existing component, refer to the template.ini and set the UPGRADE property to the name of the component."
Here's the Setup Error log: http://toby.pastebin.com/f63405e24 Any help?! Thanks! -Toby
Login timeout expired An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
------------------------------
Login timeout expired An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
