Error Connecting New Data Source To SQL Server Express
Dec 8, 2006
In ODBC Data Source Administrator, I add the SQL Server driver, complete a name and select my local SQL Server instance, select Windows NT authentication (the client configuration is set to TCP/IP, dynamically determine port) and on clicking Next, the following errors occur:
Connection failed:
SQLState: '01000'
SQL Server error: 2
[Microsoft][ODBC SQL Server Driver][Shared Memory][ConnectionOpen (Connect()).
Connection failed:
SQLState: '08001'
SQL Server error: 17
[Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.
I note that in the Help it says: "The SQL Server system administrator must have associated your Microsoft Windows login with a SQL Server login ID".
Is this the problem? If so, where do I make this association?
Thanking you in anticipation.
View 2 Replies
ADVERTISEMENT
Aug 31, 2007
Hi,
I am new to SQL server and am experiencing problems with connecting to SQL server express from my VS C++ 6. Since its just the start, I am trying to play around with data access on the computer with the server installed.
I want to connect to the server through ODBC and understand that I can do so by first creating a data source. However, at the Data Source Administrator, there were errors when connecting to the server. I tried with different server names, with Shared memory/TCP/Named pipes enabled(in all combinations) at the Configuration Manager but to no avail.
However, I am able to contact to the server through Shared memory at the Management Studio Express. I don't know what is wrong.
Let me know if you need extra information to give me assistance.
Thanks in advance.
Mel
View 1 Replies
View Related
Feb 27, 2007
Hello,
I'm a newbie who is trying to create a connection to the server in my website application and I keep getting the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server). I enabled TCP/IP and Pipe in the configuration and restarted the engine and server but I still get this error and it's stressing me out. Below is the code for the app. Any help would be greatly appreciated. Thanks
Imports System.Data
Imports System.Data.SqlClient
Partial Class _Default
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
' Create the database Connection
Dim conn As New System.Data.SqlClient.SqlConnection( _
"Server=Main;" + _
"Integrated Security=True;" + _
"Database=ShoppingCartData;" + _
"AttachDBFilename=" + _
"C:DOCUMENTS AND SETTINGSTONYAMY DOCUMENTSVISUAL STUDIO 2005WEBSITESADOAPP_DATAADO.MDF")
' Create the Data Adapter with the required SELECT statement
Dim Adapt As New System.Data.SqlClient.SqlDataAdapter("SELECT * FROM Products", conn)
' Create the dataset with the required information
Dim dsADO As New System.Data.DataSet()
Adapt.Fill(dsADO)
Dim DR As DataRow()
' Define the Table
Dim ProdTbl As New Table()
' Create content for the Web Page
For Each DR In dsADO.Tables(0).Rows
'Create a new table row.
Dim ProdRow As New TableRow()
'Create a cell within the row.
Dim ProdCell As New TableCell()
'Define content for the Cell
Dim ThisLink As New HyperLink()
ThisLink.NavigateUrl = "Products.aspx?ProdID=" + _
DR("ProductID").ToString()
ThisLink.Text = DR("ProductNme").ToString()
ThisLink.ID = DR("ProductID").ToString()
'Add the content to the cell and the cell to the row. Place the row in the table
ProdCell.Controls.Add(ThisLink)
ProdRow.Controls.Add(ProdCell)
ProdTbl.Controls.Add(ProdRow)
Next
'Add the table to the Place holder.
phProducts.Controls.Add(ProdTbl)
End Sub
End Class
View 3 Replies
View Related
Feb 15, 2006
Just manged to install sql server 2005 express after two days. I have a problem now! When i try to connect to it via my browser (local database), i get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have opened the surface area configuration manager and set the connections to remote and local but it still doesnt work
Any ideas would be great
Paul
View 2 Replies
View Related
Sep 8, 2007
I've been trying to configure remote connections to my sql server express to no avail.
First here are some constants to clear some things up:
- OS: Windows XP Pro
- SQL Express version: April CTP release
- Windows Firewall: disabled (to avoid any problems there)
- Network type: two computers connected a router.
- Router firewall: Enabled (I may be wrong but the router firewall only blocks external traffic, so I left it on.)
First, I configured my SQL server to allow remote connections in the SQL Surface Area Configuration. (Set it to both TCP/IP and named pipes)
Second, I enabled and configured sql server browser.
Third, I enabled TCP/IP and named pipes in the 'Protocols for SQL Express' option of the SQL Server Configuration Manager.
According to http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I have done everything I need to (including edit the registry to enable the SQL Server Browser service) and the error I continue to get is:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
So I tinkered and had no success in messing with anything that would fix it. Although, ***when I browsed for network servers on different machine, the server instance DID show up in the list***. So I find it odd that it can find the instance when browsing, but fails to 'find' it when making a connection.
So I didn't stop there, I decided to try the non-sql server browser method of remotely connecting: specifying the IP.
I went back to the blog of instructions referenced above and re-did the steps, this time specifying a TCP Port for the server instance and then after specifying the port on the remote computer connection string, and attempting to connect, I get this error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)"
I've done all I know how, read all the possible blogs I can, and nothing's come up. If anyone can shed some light on me, I'd pay you 1 billion pretend dollars. Any help would be appreciated. Thank you!
View 2 Replies
View Related
Jan 30, 2006
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact under the default settings of SQL SERver does not allow remote connections. (provider:Named Pipes Provider, error: 40-Could not open a connection to SQL Server)
View 6 Replies
View Related
Jun 20, 2007
Dear All,
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
View 5 Replies
View Related
Mar 18, 2007
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
EXEC sp_addlinkedserver
@server = 'server_name',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'odbc_dsn_name'
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
Any assistance would be appreciated.
Thanks,
View 3 Replies
View Related
Mar 13, 2008
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
View 1 Replies
View Related
Jul 24, 2007
I'm using SQL Server 2005 Express, Windows XP SP2. I connect using Windows authentication.
The data source that I'm trying to hit is on a remote server. It's an OpenLink ODBC Data source, and the server is in another location. SQL Server 2005 Express and the ODBC connection are both installed/configured locally on my machine.
I can connect to the remote server. The DSN exists as a System DSN.
The DSN has its own proprietary configuration utility, which I can configure so that the server name is XPLILLEYGSQLEXPRESS. The configuration utility doesn't care; I connect successfully one way or the other.
When I open Management Studio Express, I can see my database (CMS) listed under the "Databases" folder, but there's no tables in there, other than the system tables.
So my question is, what am I missing?
Thanks
Geoff Lilley
View 1 Replies
View Related
Nov 14, 2006
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
View 3 Replies
View Related
May 21, 2007
I'm trying to connect to the sample database (rs2005sbsDW) that I installed from a CD that came with the book SQL Server 2005 Reporting Services. When I try to connect to this database in the report wizard following instructions on page 41, it tells me my database doesn't exist. The following path was entered into the New Project dialog box which does exist. C:Documents and SettingsBrett SomersMy DocumentsMicrosoft PressRS2005SBSworkspace. The book guides me to enter Localhost as the server name. The rs2005sbsDW database does not appear in the "select or enter a database name" dropdown field.
View 10 Replies
View Related
Feb 20, 2008
Hi,
We are in the process of upgrading a SQL Server 2000 database to 2005. For the mean time, we're trying it out on SQL Server Express 2005. My question is, can reports in SSRS 2005 pull data from SQL Server 2000 in case both are installed side by side in the same machine and the 2000 version is the default instance while the 2005 express edition is the named instance?
Thanks a lot!
View 5 Replies
View Related
Sep 12, 2006
I am attempting to insert information from Visual Web Developer 2005 using either the Gridview or Datalist controls into a SQL Server 2005 database and get stuck when defining the custom statement.When I enter the text within the insert tab, the <next> button remains greyed out, preventing me from continuing to the next page.If I copy the same text into the select tab, then I can continue with the wizard, however this raises other problems which may or may not be related (multiple insertions of the data into the SQL Server database table - possibly due to postback functions). I would rather use insert to confirm that my second problem is not because I am using the wrong option.My question is:Should I be able to use the insert function within VWD express or is this only available within the standard/pro editions?
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
Dec 5, 2006
Hi - can anyone please help?
I am using SQL Express 2005 - and have an asp (yes legacy asp) site running locally. It works ok, until I try and connect to the server from another PC.
The error message I get is:
******
Microsoft OLE DB Provider for SQL Server error '80004005'
Cannot open database "fixit" requested by the login. The login failed.
/fixitnew/fixit_login.asp, line 30
******
Line 30, is where I open the connection to the database.
My connection string is:
myConn = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=fixit;Data Source=misinvaknb01sqlexpress;"
Can anyone please help?
Thanks in advance,
Mark
View 1 Replies
View Related
Mar 1, 2008
Hopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?
View 3 Replies
View Related
Sep 28, 2006
How do I get rid of this error message when tring to log into my web site user account stored on the default ASP.NET 2.o generated database on my local computer?
Server Error in '/FundACure.org' Application.
Cannot open user default database. Login failed.
Login failed for user 'LANBOYASPNET'.
Where "LANBOY" is the name of my computer. I am logged in as myself "LANBOYKEVIN" My web page is trying to log into the server using the name "ASPNET" which I assume is a standard ASPNET user name.
I thought it was failing because I needed to grant access to this user in the server, so I added the account for the server. Same problem.
So I thought I needed to create this user in my Windows XP user list. When I tried it said "this user already exists" even though it isn't displayed in the list. That is when I realized that it is a standard user established by ASP.NET. It is probably supplied in the C# code through a base class.
So, how do I get this DB to connect? Is the user missing, or is it that my connection string is wrong?
View 1 Replies
View Related
Aug 23, 2006
Really confused ... I created 2 tables in a VB Express program (which went well). Problem is that I can't see/find those tables with MSME. I don't really understand how to connect the MSME to where the tables are. I created the tables under My DocumentsData and they are DBapp.mdf + DBapp_log.LDF and the tables are Items and Preferences. The VB application can "see" the tables OK.
Do I need to move the tables to C:Program FilesMicrosoft SQL ServerMSQL.1MSQLDATA (like the Adventureworks installation which I haven't done) or what?
Please help a newbie
Thanks
George
View 3 Replies
View Related
Feb 7, 2008
Hi,
The issue,
I have had SQL express installed and working ok, however, I can no longer connect
OS: XP sp2.0
.net installed
ver1.1 .. 2.0 sp1, 3.0sp1 and 3.5
The install of SQL was using the SQLEXR_adv download
I have removed SQL and all associated applications folders and windows SQL services
I have re-installed many times but always receive the same issue.
I re-built the .net 2.0
The issue I have is when I try and connect form my applications or with Express sql management studio I receive the following error:
It looks like a .net2.0 issue
TITLE: Connect to Server
------------------------------
Cannot connect to RNASHLTOPSQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. (System.Data)
------------------------------
The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. (System.Data)
------------------------------
The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters' threw an exception. (System.Data)
------------------------------
Configuration system failed to initialize (System.Configuration)
------------------------------
Unrecognized configuration section system.serviceModel. (C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config line 136) (System.Configuration)
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
Jan 18, 2007
I have seen several posts on the subject, and have tried various configs. At this point, I am simply trying to connect to SQL Express, that's all.
I have an app. in MS Access that uses SQL Express as a back-end database (this is the simple desktop version of our software). I don't remember having so many issues with just connecting to a small db engine on a single computer..! Just to get it off my chest, there was a post about this subject where someone listed more than 15 items to check... If anyone at Microsoft is reading... connections should not require a 15-item check-list.. People running sql express are not creating a sophisticated database system, probably running it because, they want a free, easy solution, and do not have an IT person, nor are they intersted in reading any 1 of the 15 items... Just trying to connect to the instance of the database that runs on the same computer.... that should not require more than possibly 3 different settings.
My objective at this point, is simply to connect! Nothing else.
My environment settings are:
OS: Win XP Professional
MS Access(2003) and SQL Express both installed on the same computer
All connection attempts are on the same computer
SQL Express is installed in mixed mode
SQL Browser running, Network DDE running (if needed)
All Network protocols are enabled (tried disabling and enabling each 1 at a time as well)
All Client protocols are enabled
I tried setting network library to "dbmssocn", and left blank for default (uses namedpipes)
I tried using host name, localhost, and IP address for servername (with the SQLEXPRESS of course)
Also tried leaving it blank
I tried with Integrated security, also tried with the user "sa" and "test" user (both enabled and capable of logging in and accessing the database)
I tested the connection from SQL Express Manager, successfully connected in all modes (secure, and with SQL users) to make sure there are no issues with the users or security.
Tried turning the SQL browser off (this should not be needed in local mode)
Tried using an alias
Tried using attach database as a filename
And, the firewall is turned off.
Always getting the error "....connection failed because of an error in initializing provider" (whether using namedpipes, or TCP, or shared mem)
Both SQL Express and Access are installed on the computer, that should include the providers...
Please let me know if there is anything left for checking and/or trying... Appreciate your help...
View 1 Replies
View Related
Nov 1, 2006
Hello All,
I have a unique problem while connecting to oracle source with a 64 bit processor. I can connect to the oracle from the command prompt in the 64 bit processor but not from SSIS.
The acutal problem is, when check the properties of the connection manager and provide a provider for oracle, and then provide username and password and click on test connection. I get the following error:
"Test Connection failed because of an error in initializing provider.ORA-06413: Connection not open"
Regards,
Raju
View 3 Replies
View Related
Jul 31, 2007
Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?
When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"
We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.
We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.
How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?
This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.
Thanks.
View 1 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
Jan 14, 2006
I tried to connect to SQL server 2005 express in LAN Using C# express
I got this msg
the file \blablabla\blablabla.mdf is on a network path is not supported for database file.An Attempt to attach an auto-named database for file \blablablalablabla.mdf failed. a database with same name is exist, or specified file can not be opened, or its located on UNC share.
Is that mean :
I can not connect to SQL server remotly using express edition of C#
SQL server dosen't support connection in LAN
I tried to set all options like enable TCP IP connection and networks
by the way
The data has unquie name and it is located in shared folder and I can easly to connect to database like access with no problem
I will be thankful if you can help me
View 11 Replies
View Related
May 21, 2008
String or binary data would be truncated. I get this error when entering data using sql server management studio express.
I am not running a sql to insert or update the table. This is through the EDI.
The data type is varchar(100). I enter one character and it errors on me. So this isn't a string being too long problem.
Any ideas?
View 2 Replies
View Related
Dec 19, 2007
hello eveyone..i have just downloaded and installed the visaul web developer 2005 express edition and sqlserver 2005 express edition.On top of that i even downloaded and installed the northwind database.But my problem is when i am connecting to the northwind database by clicking toos menu>connect to the database>choose datasource>new connection>..i have provided it with the required information..but as soon as i press "Test Connection" button the following error box displays.. "an error has occured while establishing a connection to the server.when connecting to the sql server2005,this failure may be caused by the fact that under default settings sql server doestnot allow remote connections.(provider:Named piped providers,error:40-couldnot open a connection to sqlserver.)" i have no idea whats is all about..can anyone get me pass this error..
View 2 Replies
View Related
Feb 20, 2006
Dear all,
I have SQL Express 2005 - installed in Windows XP and I want to connect SQL Express using VB .NET. Kindly explain me the methods & steps to connect.
Note : While connecting using Ms-Access database - No error shown.
But while connect to SQL Server (SQL Express) I am getting the following error message.
"It is only possible to connect to SQL Server Desktop Engine databases and mirosoft databases with this version."
I am using VB .NET standard Version- But while running samples - I am referring SQL Server - It is connecting perfectly without any error.
KINDLY HELP ME to solve this problem.
thanks.
venki Rao
venki
View 1 Replies
View Related
Jan 21, 2008
I have a small networked application, using sql server 2005 express. I am using datalinks and I have configured the TCP/IP to 'Enabled' on the server and I have configured the firewall. I have one computer connecting to the database through sql authentication (using a specific name and password). However I have another machine, using the same configurations, but it has a AMD 64 processor. I get the "Sql Server does not exist or access denied" message.
I would greatly appreciate assistance.
View 3 Replies
View Related
Sep 7, 2006
Hi All,
I want to connect to SQLExpress database on the network. I can do so using code but I want to use the Data Source Configuration Wizard. It seems this only works for local instances of SQL server. Is this true?
I can connect just fine to the database on the network using Microsoft SQL Server Management Studio Express...for what this is worth.
I have tried to map a drive to the SQL server machine and pick the mdf file but I get the error msg of network path is not supported for database files....I have turned on allow remote connections, allow tcp/ip, named pipes, added sqlserv.exe and sqlbrowser.exe to my firewall exceptions ect..
I want to be able to use Table Adapters, SqlDataAdapters ect. After reading numerous forum questions/ kb articles this seems to be a common problem. I am on the verge of just saying forget it and use MS Access instead.
Thanks in advance!
View 4 Replies
View Related
Apr 16, 2008
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
View 13 Replies
View Related
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related
Sep 6, 2006
Hi Guysi have a problem with my asp.net 2.0 application, I'm trying to connect to sql server database but it gives the following error: System.Data.SqlClient.SqlException: Cannot open database "MyDatabase" requested by the login. The login failed.Login failed for user 'MyserverASPNET'.Before i had my application on File System and it was connecting fine, now I moved it to IIS and it doesn't work anymore.Connection at Web.Config file :configuration><appSettings><add key="ConnectionString" value="server=(local)SQLEXPRESS; Trusted_Connection=true; database=MyDatabase"></add></appSettings><connectionStrings/>How do i create login for that user?Thanks
View 2 Replies
View Related
