Error Converting Data Type Nvarchar To Datetime
Mar 23, 2006
Hi
I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime.
I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error.
Any assistance would be greatly appreciated.
View 4 Replies
ADVERTISEMENT
Jun 2, 2008
Hi,
I'm pretty desperat after trying solving the above problem in several days. I hope somone here can help me :-)
I have this stored procedure. When I try to Execute the storedprocedure where I have a date as parameter I get the above error.
I checked (many times), that the input parameter is a datetime format (30-05-2008) and also I checked the tabel and it is datetime format. I checked the table to see if it was english datetime format - but all the datetimes that are listet are listed in danish datetime format DD-MM-YYYY.
In the stored procedure I try this:
fProjectSkuTimeStamp >= @ReducedTime
I can't figure out where it gets that nvarchar from?
My stored procedure look like this:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
set NOCOUNT ON
go
ALTER PROCEDURE [dbo].[GetProjectSkuList]
@fProjectFId AS INTEGER = null, --ProjektId
@ReducedTime AS DATETIME --Tidsrum fra
AS
BEGIN
SELECT tProjectSku.fProjectSkuPId, tProjectSku.fCompanyFId, tProjectSku.fProjectFId,
tProjectSku.fProjectSkuDate,
tProjectSku.fOurContactFId, tProjectSku.fOurContactF2Id, tProjectSku.fOrderFId,
tProjectSku.fProjectSkuTimeStamp,
tProjectSku.fProjectSkuNote1, tProjectSku.fProjectSkuNote2, tProjectSku.fContactFId,
tProjectSku.fStoreTransactionsFId,
tProjectSku.fProjectSkuSalesPrice, tCompany.fCompanyName, tProject.fProjectName,
tOurContact.fOurContactFirstName + ' ' + tOurContact.fOurContactLastName AS CreatedBy,
tOurContact_1.fOurContactFirstName + ' ' + tOurContact_1.fOurContactLastName AS Responsible,
tContact.fContactFirstName + ' ' + tContact.fContactLastName AS ContactFullName,
tStoreTransactions.fStoreTransactionsCostPrice,
tStoreTransactions.fStoreTransactionsSerialNo
FROM tOurContact AS tOurContact_1 RIGHT OUTER JOIN
tContact RIGHT OUTER JOIN
tProjectSku LEFT OUTER JOIN
tStoreTransactions ON tProjectSku.fStoreTransactionsFId = tStoreTransactions.fStoreTransactionsPId ON
tContact.fContactPId = tProjectSku.fContactFId LEFT OUTER JOIN
tOrder ON tProjectSku.fOrderFId = tOrder.fOrderPId ON tOurContact_1.fOurContactPId = tProjectSku.fOurContactF2Id LEFT OUTER JOIN
tOurContact ON tProjectSku.fOurContactFId = tOurContact.fOurContactPId LEFT OUTER JOIN
tProject ON tProjectSku.fProjectFId = tProject.fProjectPId LEFT OUTER JOIN
tCompany ON tProjectSku.fCompanyFId = tCompany.fCompanyPId
WHERE
(tProjectSku.fProjectFId = @fProjectFId) AND
--fProjectSkuTimeStamp >= CONVERT(datetime, @ReducedTime, 120)
fProjectSkuTimeStamp >= @ReducedTime
ORDER BY tProjectSku.fProjectSkuPId DESC
END
Kind regards,
simsen :-)
View 7 Replies
View Related
Mar 27, 2008
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam]
-- Add the parameters for the stored procedure here
@coachName varchar(100),
@TeamName varchar(100),@regionID INT
AS
SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID;
Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);
conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn);
command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text);
command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection);
DataList1.DataSource = reader;
DataList1.DataBind();
conn.Close();
View 13 Replies
View Related
Feb 28, 2008
Hi,
I get "Error converting data type nvarchar to int." It is some kind of SQL exception. This is the code in my application.
SqlConnection sqlConnection1 = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand();
Object start;
string activityID = Session["activitygroupID"].ToString();
cmd.Parameters.AddWithValue("@ActivityGroupID", activityID);
cmd.CommandText = "get_startdate";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Connection = sqlConnection1;
sqlConnection1.Open();
SqlDataReader reader = cmd.ExecuteReader(); //The code stops here!!!
start = reader["StartDate"];
sqlConnection1.Close();
The stored procedure on the SQL-server looks like so. StartDate is of DateTime type.
ALTER PROCEDURE [dbo].[get_startdate]
-- Add the parameters for the stored procedure here
@ActivityGroupID int
AS
BEGIN
SELECT StartDate
FROM dbo.CurrentGroup
WHERE ActivityGroupID = @ActivityGroupID
END
I appreciate any help!
View 4 Replies
View Related
Feb 25, 2008
I getting the above error can someone please help me solve it, here is the code:
public void InsertHost() { // TODO // - Call stored procedure to write to a log file writeToLog using (SqlConnection cn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"])) { SqlCommand cmd = new SqlCommand("writeToLog", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@pAction", "action"); cmd.Parameters.AddWithValue("@pHostName", "Hostname"); cmd.Parameters.AddWithValue("@pUserNUm", "requestorID"); cn.Open(); cmd.ExecuteNonQuery(); } }
Here is the storedprocedure:
ALTER PROCEDURE dbo.writeToLog(@pAction varchar(10), @pUserNUm bigint, @pHostName varchar(25))AS INSERT INTO dbo.hostNameLog (action, requestorID, HostName)VALUES (@pAction, @pUserNUm, @pHostName)
Here is the table:
HostName - varchar, action - varchar, requestorID - bigint
I can't seem to find the error.
View 7 Replies
View Related
Dec 12, 2014
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
My stored procedure:
ALTER PROCEDURE dbo.MChemsInsert
(
@LabLot nchar(10),
@Chem nchar(50),
@Source nchar(50),
@SourceLot nchar(10),
[code]....
View 2 Replies
View Related
Sep 24, 2015
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal
,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat
FROM QA
WHERE QA_AutoID in (
SELECT TOP 1 QA_AutoID
FROM QA
WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1
)
--AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0)
ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
View 13 Replies
View Related
Apr 20, 2007
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
View 2 Replies
View Related
Apr 29, 2015
I am getting the above error when trying to add a dataset to my report. Here is my stored procedure below.
USE [HSIU_TEST]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [ssrs].[spKEMHWaitTimeCaseList]
[Code] .....
View 5 Replies
View Related
Jan 19, 2007
Hi,
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
View 2 Replies
View Related
Aug 24, 2007
ALTER procedure [dbo].[findConsultantMail]
(
@PerID numeric(18,0),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =@PerID)
return @perMail
I want to get Email address from sql database.
But whenever I executed stored procedure I get an error message
"Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int"
If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
View 4 Replies
View Related
Aug 19, 2015
I am trying to convert a column (nvarchar) to date time.
Here is an example of some values:
20110905
20110901
20111003
As expected, I received the following error: 'Conversion failed when converting date and/or time from character string.'
However, I am unsure how I should approach updating the whole column. I would like the format to be '103'.
View 9 Replies
View Related
Oct 13, 2012
When I run the following sql query:
"update table set price = price * 1.1 "..
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
View 9 Replies
View Related
Feb 16, 2007
Hi,
It is not exactly what I stated in the subject - It's an outcome - exception thrown while executing non-query command.
I get this exception when I try to execute my stored procedure that takes datetime as one of its parameters.
I am using dataset designer to create table adapters and build queries. Then I simply use objectdatasource component that uses one of the table adapters and bind it to for example a detailsview control.
When I run this in debug mode and trace the objects everything looks perfect including these datetime parameters. It is sql server that throws the exception. I ran the sql profiler to see what exactly is going on, and I captured the command that is sent by ADO - it's broken into several lines right in the middle of my datetime parameters... this is the source of the problem. Everything is working fine when I take this command and execute it as a single line in the sql management studio.
Is there anything about ADO that I do not know?
View 2 Replies
View Related
Jul 7, 2004
I'm getting the error Error converting data type DBTYPE_DBTIMESTAMP to datetime when I try to import a date field from Oracle to SQL Server.
SELECT CAST(cancel_dt as datetime) FROM OPENQUERY(orcldb, 'SELECT cancel_dt FROM tablename WHERE id= 12345')
The date in Oracle is 19-JUN-99, but it's coming over as 06/19/0999 and it throws the error because the year 999 is invalid in SQL Server. Any ideas on why Oracle or SQL server would convert the year to 0999 instead of 1999?
This is also happening on a value 24-SEP-07 coming over as 09/24/0207
Most other date values work, so I'd really like to get in depth into the process that occurs when converting to a SQL Server datetime.
View 7 Replies
View Related
Dec 4, 2004
hi
i want to pass a datetime variable from a asp page to MSSQL through a stored procedure, & i get this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]Error converting data type varchar to datetime.
this is the code that i use in page:
strsql="sp_inventory @timee=' " & RecievedDate & " ' "
also i use this one:
but i still get this error
strsql="sp_inventory @timee=' " & cdate(RecievedDate) & " ' "
this is maybe useful that i get this errot on some PCs, not all the computeres.
sometimes work well, & sth not work.
View 2 Replies
View Related
Dec 22, 2004
Here is the stored procedure
the data type for the column b_trn_tentdte is decimal(8,0).
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER Procedure Prc_New_cus_wo_prev_posted
@b_trn_tendte_Beg_Date datetime
,@b_trn_tendte_End_Date datetime
@b_trn_tendte_Beg_Date1 datetime
,@b_trn_tendte_End_Date2 datetime
as
declare @Beg_tentdte datetime
declare @End_tentdte datetime
declare @Beg_tentdte1 datetime
declare @Beg_tentdte2 datetime
set @Beg_tentdte = convert(varchar(10), @b_trn_tendte_Beg_Date, 112)
set @End_tentdte = convert(varchar(10), @b_trn_tendte_End_Date, 112)
set @Beg_tentdte1 = convert(varchar(10), @b_trn_tendte_Beg_Date1, 112)
set @Beg_tentdte2 = convert(varchar(10), @b_trn_tendte_End_Date2, 112)
/* this query looks for customers with posted
transactions but none prior to the date range
in question */
Select distinct b_cus_cname
from
bar_cus_db_rec
,bar_trn_db_rec b
where b.b_trn_instid = ''
and b.b_trn_instid = b_cus_instid
and b.b_trn_actid = b_cus_cusid
and convert(varchar(10), b.b_trn_tentdte) between @Beg_tentdte and @End_tentdte
and not exists (select c.b_trn_actid
from bar_trn_db_rec c
where c.b_trn_instid = b.b_trn_instid
--and c.b_trn_tentdte between 19970901 and 20030229
and convert(varchar(10), c.b_trn_tentdte) between @Beg_tentdte1 and @Beg_tentdte2
and c.b_trn_actid = b.b_trn_actid)
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
every time I run the query, I get this error message:
Error converting data type varchar to datetime.
thanks for your assistance.
View 5 Replies
View Related
Jun 21, 2006
An application i am using creates an error.
Using SQL-profiler i catch this statement:
exec sp_executesql N'insert into RECORDING_SCHEDULE (programme_oid, capture_source_oid, filename, status, recording_group, recording_type, manual_channel_oid,
manual_start_time, manual_end_time, quality_level, pre_pad_minutes, post_pad_minutes) values (@P1,@P2,@P3,@P4,@P5,@P6,@P7,@P8,@P9,@P10,@P11,@P1 2)',N'@P1 int,@P2 int,@P3
nvarchar(19),@P4 int,@P5 int,@P6 int,@P7 int,@P8 datetime,@P9 datetime,@P10 int,@P11 int,@P12 int',177748,2,N'Lilla röda traktorn',4,40,5,16,''2006-06-21
17:00:00:000'',''2006-06-21 20:00:00:000'',1,1,2
After removing the double ' around the date and time parts i get the following error when running in QA:
Msg 8114, Level 16, State 5, Line 0
Error converting data type varchar to datetime.
If a remove the time portion it works.
The DDL for the table is:
CREATE TABLE [dbo].[RECORDING_SCHEDULE](
[oid] [int] IDENTITY(1,1) NOT NULL,
[programme_oid] [int] NULL,
[capture_source_oid] [int] NULL,
[status] [smallint] NOT NULL,
[filename] [varchar](255) NULL,
[recording_type] [int] NULL,
[recording_group] [int] NULL,
[manual_start_time] [datetime] NULL,
[manual_end_time] [datetime] NULL,
[manual_channel_oid] [int] NULL,
[quality_level] [int] NULL CONSTRAINT [DF__RECORDING__quali__38996AB5] DEFAULT ((0)),
[pre_pad_minutes] [int] NULL CONSTRAINT [DF__RECORDING__pre_p__398D8EEE] DEFAULT ((0)),
[post_pad_minutes] [int] NULL CONSTRAINT [DF__RECORDING__post___3A81B327] DEFAULT ((0)),
CONSTRAINT [aaaaaRECORDING_SCHEDULE_PK] PRIMARY KEY NONCLUSTERED
What am I missing?
View 2 Replies
View Related
May 4, 2006
Hi
I am trying to transfer data from Access 2000 database to SQL server 2005 via SSIS. My access database table has a field with data type Date/Time and SQL server table has a field with data type datetime. When I am running the SSIS package, it is throwing the following error and stops execution.
[SQL Server Destination [12466]] Error: An OLE DB error has occurred. Error code: 0x80040E07. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E07 Description: "Error converting data type DBTYPE_DBTIMESTAMP to datetime.".
Please help.
Thanks in advance,
Ramzee
View 12 Replies
View Related
Apr 22, 2007
Hi
I am trying to migrate data from oracle to sql server 2005 in sql server management studio express, most of my data in oracle have been successfully moved into sql server 2005 by using storage procedure. But some of data can't move across becasue i got this error:
Error converting data type DBTYPE_DBTIMESTAMP to datetime
Does anyone know why? Please help?
Thanks
Li
View 1 Replies
View Related
Oct 13, 2006
Hi,
I am havin problems with the following giving a message
Msg 8114, Level 16, State 4, Line 0
Error converting data type varchar to datetime.
exec sp_executesql
@stmt=N'UPDATE CUSTOMER
SET [REQUEST] = @19, [DISC_EXPRY] = @28, [GROUP1] = @29, [GROUP2] = @31, [PR_LEVEL] = @48, [MOD_DATE] = @55, [MEM_CODE] = @63, [MEM_DATE] = @64, [HO_MOD] = @66, [LASTUPDATE] = @78
WHERE [ID] = @Old_1'
, @params=N'@19 nvarchar(4),@28 DateTime,@29 nvarchar(5),@31 nvarchar(5),@48 nvarchar(1),@55 DateTime,@63 nvarchar(7),@64 DateTime,@66 Integer,@78 Float,@Old_1 Integer',
@19= 'NRMA',@28= '1752-09-14',@29= 'ALBUM',@31= 'FRAME',@48= 'A',@55= '2006-10-10',@63= '1003.50',@64= '2006-10-10',@66= 3,@78= 39000.190633,@Old_1= 454636
however, as soon as I remove the datetime fields it works
exec sp_executesql
@stmt=N'UPDATE CUSTOMER
SET [REQUEST] = @19, [GROUP1] = @29, [GROUP2] = @31, [PR_LEVEL] = @48, [MEM_CODE] = @63, [HO_MOD] = @66, [LASTUPDATE] = @78
WHERE [ID] = @Old_1'
, @params=N'@19 nvarchar(4),@29 nvarchar(5),@31 nvarchar(5),@48 nvarchar(1),@63 nvarchar(7),@66 Integer,@78 Float,@Old_1 Integer',
@19= 'NRMA',@29= 'ALBUM',@31= 'FRAME',@48= 'A',@63= '1003.50',@66= 3,@78= 39000.190633,@Old_1= 454636
what am I doing wrong with the datetime parameters?
Grimhael
View 4 Replies
View Related
Sep 20, 2006
Hi all,In the beginning of this month I've build a website with a file-upload-control. When uploading a file, a record (filename, comment, datetime) gets written to a SQLExpress database, and in a gridview a list of the files is shown. On the 7th of September I uploaded some files to my website, and it worked fine. In the database, the datetime-record shows "07/09/2006 11:45". When I try to upload a file today, it gives me the following error: Error: Arithmetic overflow error converting expression to data type datetime. The statement has been terminated.While searching in google, i found it might have something to do with the language settings of my SQLExpress, I've tried changing this, but it didn't help. What I find weird is that it worked fine, and now it doesn't anymore. Here is my code of how I get the current date to put it into the database:1 SqlDataSource2.InsertParameters.Add("DateInput", DateTime.Now.ToString());
Am I doing something wrong, or am I searching for a solution in the wrong place? best regards, Dimitri
View 3 Replies
View Related
Jan 7, 2008
Hi,
I'm having this error with my page, user picks the date -using the AJAX Control Toolkit Calender with the format of ( dd/MM/yyyy ).
It looks like the application current format is MM/dd/yyyy, because it shows the error page if the day is greater than 12, like: 25/03/2007
What is wrong?
Here is the error page:
Server Error in '/' Application.
Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Any help will be appreciated!
View 3 Replies
View Related
Jun 12, 2014
The following codes give me the error "arithmetic overflow error converting expression to data type datetime" Unfortunately, the datatype of date of this database is still varchar(50)
select date from tbltransaction
where datepart(wk,convert(datetime,date,103)) = 15
View 3 Replies
View Related
Apr 8, 2004
HI,
I HAVE BEEN TRYING TO TRANSFORM AN OLD TABLE TO A NEW FORMAT AND CHANGE SOME OF THE DATATYPE FORMATS USED IN THE OLD ONE.
OUT OF WHICH ONE IS A COLUMN CALLED AS FORM_RECEIVE_DATE WHICH HAS NVARCHAR(41) AS DATATYPE IN THE OLD TABLE CREATED BY A PREVIOUS DBA (DON'T KNOW wHY?)
wHILE CONVERTING IT INTO DATATYPE DATETIME , I AM GETTING THIS ERROR :- "Arithmetic overflow error converting expression to data type datetime." i DON'T KNOW WHY
hERE ARE FEW EXAMPLES OF THE DATA CONTAINED IN THE PREVIOUS TABLE :-
05082003
05062003
05142003
COULD YOU PLS TELL ME A WAY TO SOLVE THIS ?
View 4 Replies
View Related
May 11, 2000
I am trying to do some amount calculations.
The amount was declared as nvarchar data type.
I did the following coding. I want to get 2 places right of decimal
but am getting only one place right of decimal.
SELECT
(CAST(EQ_TotQuoteAmnt AS Float(7,2)) -
CAST(EQ_InsFee AS Float(7,2)) - 150) as Inforce_Premium
FROM Quoted
Can someone please help me with the syntax?
Thanks in advance.
M. Khan
View 1 Replies
View Related
Jun 1, 2008
i am getting this error when passing multiple checkbox values to next page..
Error is Conversion failed when converting the nvarchar value '3,4' to data type int.
my code is below
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:mobiletimesConnectionString %>"
SelectCommand = "SELECT * FROM [device] WHERE [dev_id] IN (@chk1)">
<SelectParameters>
<asp:FormParameter FormField="chk1" Name="chk1" />
</SelectParameters>
</asp:SqlDataSource><asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"
BackColor="White" BorderColor="#CC9966" BorderStyle="None" BorderWidth="1px"
CellPadding="4" GridLines="Both">
<FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
<ItemStyle BackColor="White" ForeColor="#330099" />
<SelectedItemStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
<HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
<ItemTemplate><div class="overviewpdamain" >
<div class="overviewpdadevice">
<center>
<b><%#Eval("dev_name")%></b><br />
<b>
</b>
</center></div>
</div></ItemTemplate>
</asp:DataList>
View 6 Replies
View Related
Apr 17, 2015
This is a common error for SQL Server, but I got it in a uncommon way.I have a table called - tblIDNumber where there are two columns - IDN_Number [NVarchar(200)] and Temp [BigInt]
If I run,
SELECT Â *
FROM Â Â dbo.tblIDNumber
WHERE Â IDN_IDNumberTypeStaticValue = 33
    AND IDN_Removed = 0
    AND CAST(IDN_Number AS BIGINT) = 1
SQL Server give me the error:
Msg 8114, Level 16, State 5, Line 1
Error converting data type nvarchar to bigint.
I first thought IDN_Number in type 33 has characters, but it doesn't, becasue the below query works!!!
UPDATE dbo.tblIDNumber
SET Temp = CAST(IDN_Number AS BIGINT)
WHERE Â IDN_IDNumberTypeStaticValue = 33
    AND IDN_Removed = 0
To workaround, I ran the query,
UPDATE dbo.tblIDNumber
SET IDN_Number = '123'
WHERE Â IDN_IDNumberTypeStaticValue = 33
    AND IDN_Removed = 0
and then I ran the first query, and SQL Server does NOT give me the same error -Â Msg 8114, Level 16, State 5, Line 1 Error converting data type nvarchar to bigint.
Second query approved there is nothing wrong from converting the value in IDN_Number to a BigInt, but the third query gave the hint that data might be the cause?????
finally, I found the root cause to be an index that the first query uses :
CREATE NONCLUSTERED INDEX [IX_tblIDNumber_Covering] ON [dbo].[tblIDNumber]
(
[IDN_Removed] ASC,
[IDNumberCode] ASC
)
INCLUDE ( [IDN_Number],
[IDN_Reference]) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 85) ON [PRIMARY]
GO
If I remove the index, the first query works without the error.
View 10 Replies
View Related
Jan 23, 2007
Hi,
I have a webform with a drop-down listbox, binded to a table and a GridView, binded to another table. My goal is when I select a value (country in my case) in the drop-down listbox to change what is shown in the GridView, based on the ID that I get from the drop-down listbox.
Here is the code (the important parts...):
Select a Country : <asp:DropDownList ID="CountriesDropDownList" runat="server" DataSourceID="SqlDataSource2" DataTextField="Name" DataValueField="CountryID" Width="220px" AutoPostBack="True">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>"
SelectCommand="SELECT [CountryID], [Name] FROM [DS_Country]">
</asp:SqlDataSource>
<asp:GridView ID="ProvincesGridView" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="ProvinceID,CountryID,Name,ShortName,Description" DataSourceID="SqlDataSource1" BackColor="White" BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" CellPadding="3" HorizontalAlign="Left" >
<Columns>
..............................
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DineSelectConnectionString %>"
DeleteCommand="DELETE FROM DS_Province WHERE ProvinceID=@ProvinceID"
SelectCommand="SELECT ProvinceID,CountryID,Name,ShortName,Description FROM DS_Province WHERE CountryID=@ddlCountryID"
UpdateCommand="UPDATE DS_Province SET CountryID=@CountryID,Name=@Name,ShortName=@ShortName,Description=@Description WHERE ProvinceID=@ddlCountryID"
InsertCommand="INSERT INTO DS_Province (CountryID,Name,ShortName,Description) VALUES (@CountryID,@Name,@ShortName,@Description)">
<SelectParameters>
<asp:ControlParameter Name="ddlCountryID" ControlID="CountriesDropDownList" PropertyName="DataValueField" />
</SelectParameters>
</asp:SqlDataSource>
When I run it I get this error "Syntax error converting the nvarchar value 'CountryID' to a column of data type int.". If I specify the Type="Int" in <asp:ControlParameter>..</> I get "Input string was not in a correct format. "
This is supposed to be easy, but I can't make it work ! Any suggestions will be more than welcome.
Thanks.
View 10 Replies
View Related
Sep 4, 2007
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.
View 10 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Sep 11, 2007
Hi all,
I need to migrate from a DB with a column containing dates as varchar to a new DB which will have a column with the same content as the source DB but in datetime format.
I have tried to use the cast function but i always get a message saying that the conversion result in an out of range error.
Someone can help me? PLEASE
Thanks
View 8 Replies
View Related
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
