Error Creating Package - Failed To Save Package File ... Emp EmpD4B.tmp With Error 0x80040154 Class Not Registered
May 19, 2006
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio
------------------------------
Error creating package
------------------------------
ADDITIONAL INFORMATION:
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
BUTTONS:
OK
------------------------------
I found a similar post that suggested that they try the following:
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
But msxml6.dll could not be found.
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
My concern now is what is the likelyhood of this being the only file missing from the installation.
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
Thanks.
Marshall
View 12 Replies
ADVERTISEMENT
Jan 31, 2007
Hi,
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
Thanks,
Bobby Fu
View 1 Replies
View Related
Aug 3, 2007
Hi All,
I have SSIS package which loads excel data in SQL server. Now when I execute the package by double clicking it(GUI Utility for Dtexec) or by running it in SSIS Editor it works great.
However if I run it using the command line dtexec.exe then following error arises. Note that machine on which I am executing does not have Microsoft Office installed and is 64 bit.
Error: 2007-08-03 16:53:27.42
Code: 0xC0202009
Source: PkgExtract Connection manager "SRC_Connection"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2007-08-03 16:53:27.42
Code: 0xC020801C
Source: Data Flow Task - Extract Data Excel Source [1860]
Description: The AcquireConnection method call to the connection manager "SRC_Connection" failed with error code 0xC0202009.
End Error
Error: 2007-08-03 16:53:27.43
Code: 0xC0047017
Source: Data Flow Task - Extract Data DTS.Pipeline
Description: component "Excel Source" (1860) failed validation and returned error code 0xC020801C.
End Error
Any pointers or help is greatly appreciated.
Thanks
Sid
View 11 Replies
View Related
Oct 31, 2007
Hello,
I am running Windows Server 2003 R2 Enterprise Edition SP 2
I have created an integration package in VS 2005 which extracts data from Access 2000 and imports it into a table on SQL server 2005 running on this server.
The package runs ok in Visual Studio 2005, but when i schedule it as a step in 2005 SQL Agent to execute as a SQL Server Integration package using SQL Agent Service Account it comes with the following error -
I did a bit of research which suggests this is due to SQL 64 bit and Windows 64b bit, however I am running 32 bit !! also the sql server agent is a domain admin user...can you gurus please help ?
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 10:07:42 AM
Error: 2007-10-31 10:09:13.85
Code: 0xC0202009
Source: Copy all Data to Reporting Prod Connection manager "Access Allocations.mdb"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC020801C
Source: 5_Copy vw_Allocations 5_Access Allocations [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Access Allocations.mdb" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC0047017
Source: 5_Copy vw_Allocations DTS.Pipeline
Description: component "5_Access Allocations" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC004700C
Source: 5_Copy vw_Allocations DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC0024107
Source: 5_Copy vw_Allocations
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 10:07:42 AM
Finished: 10:09:13 AM
Elapsed: 91.422 second
View 29 Replies
View Related
Sep 14, 2007
Hi,
Attempting to schedule and execute a package. The server is a 64bit clustered sql 2005 server.
The package was developed on my local install of sql 2005 client tools. I can run the package within BIDS, I can export and run the package from MSDB, but I cannot get it to execute without failure when scheduled.
I suspect it is some weirdness caused by the difference between 32 bit and 64 bit type program, but do not know what to do to figure it out.
Job history output below:
Date 14/09/2007 1:07:30 PM
Log Job History (SISS)
Step ID 1
Server servername
Job Name SSIS test job
Step Name Import NE Outpat
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: HAHSillsqlserver. ...9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:07:30 PM Progress: 2007-09-14 13:07:31.54 Source: Clinics Validating: 0% complete End Progress Progress: 2007-09-14 13:07:31.54 Source: Clinics Validating: 33% complete End Progress Progress: 2007-09-14 13:07:31.75 Source: Clinics Validating: 66% complete End Progress Error: 2007-09-14 13:07:31.89 Code: 0xC0202009 Source: ImportNewEnglandOutpatientData Connection manager "Clinics" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2007-09-14 13:07:31.89 Code: 0xC020801C Source: Clinics Clinics Access Database [15] Description: SSIS Error Code DTS_E_CANNOTACQ... The package execution fa... The step failed.
Thanks for all suggestions,
View 5 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Sep 13, 2007
I am just beginning to work on an ETL project at a new client site using their computers. They are an IT department new to SQL Server. We have SQL Server 2005 up and running, no probkem. But I get that error when I try to add a new package to an SSIS project. The error number is 0x8002801D "Library Not Registered". I did see the post about the MSXML DLL files and when I try to load an existing package I get 3 errors regarding XML - stating that the MSXML binaries may not be installed or registered properly. I searched and found the MSXML3 & 6 DLLs but the MSXML4.DLL appears to be missing. If I repair the installation, will this fix it? BTW - the MSXML 6.0 Parser did show as being installed in Add/Remove Programs.
Thanks for you help!
View 6 Replies
View Related
Feb 28, 2007
Hello,
I am doing a SSIS package that is going to export the value of a table into an excel file.
I have set Run64bitRuntime debugging setting to false to can utilizate this export, here all goes well, but now I tried to go a little more far and I want to execute this package using the ms-dos command dtexec, and it's here where it gives me the error that in a first moment I has solved changing this set to false.
Has anyone any idea of why it is giving me that error?????
View 1 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Sep 18, 2006
Hi,
I am using the SQL Package Installation Wizard to deploy my SSIS packages on to a 64-bit SQL Server and I am getting this error, Library not registered. I am also getting the same error when I tried to import a SSIS package from a 32-bit SQL Server. I was able to save my SSIS packages to the 64-bit SQL Server one by one from Visual Studio. My server is run Windows 2003 Enterprise x64 with SP1, and SQL 2005 Enterprise x64 with SP1 and hotfixes. 64-bit .Net Framework is also registered on the machine.
This is the error from the installation log file:
Exception details: Microsoft.SqlServer.Dts.Runtime.DtsTaskException: Library not registered.
---> System.Runtime.InteropServices.COMException (0x8002801D): Library not registered.
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToSQLServer(IDTSPackage90 Package, IDTSEvents90 pEvents, String ServerName, String ServerUserName, String ServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.SavePackageToSqlServer(WizardInputs wizardInputs, String packagePassword, Boolean bUseSeverEncryption, String serverName, String userName, String password, String packageFilePath, List`1 configFileNames)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.InstallPackagesToSqlServer(WizardInputs wizardInputs)
Thanks in Advance.
View 3 Replies
View Related
Apr 28, 2008
I have been searching high and low for days and I am perplexed and appalled at the lack of information regarding what can not be an isolated incident.
We are trying to get an Analysis Services 2005 to process on a x64 server. We have both versions of the Oracle client installed and .ora file in both places. I have seen a couple of posts regarding this issue, but they are 2 years old and MS was supposed to have resolved the 'parentheses' issue long ago.
The test connection succeeds, and I can explore the data in the datasource view, but I cannot process the cube. All I get is the "OLE DB error: OLE DB or ODBC error: Class not registered"
Microsoft Windows Server 2003 R2
Enterprise x64 Editon
Service Pack 2
Installed Oracle Client 10g and ODAC home
I tried a few things that were suggested in posts, but nothing has worked. I tried the cmd line starting SSMS from progra~2 instead of (x86). I tried renaming the directory with no parentheses. This is the second time we've tried to get it to work in 2 years. We'll probably give up again and stay with x86, um, because it works without all these silly mickey-mouse tricks. Most of our relational DBs are ORACLE so this is a showstopper for us as far as trying to go x64.
Sorry for the attitude, but I'm really frustrated!
If anyone can tell me a way to resolve this (or that it can't be resolved), I'd really appreciate it!
View 8 Replies
View Related
Jun 7, 2007
When I try to run DTS Package in SQL 2000, it reports a error - Class not registered?
What is the solution to this problem?
View 1 Replies
View Related
Apr 14, 2008
Hi all,
I have created a SSIS package that pulls data from paradox tables using a microsoft Jet 4.0 OLEDB Provider.
Iam pulling data from Paradox tables to SQL SERVER
In the package i have changes the properties RunIn64bitmode from True to False,doing this helped me to run the Package in BIDS environment....However iam not able to run the same using batch file.
.
I get the below error when run thru a batch file.
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered"
Has anybody come across this situation?Any help on this is greatly appreciated.
Thanks
View 1 Replies
View Related
Jan 12, 2007
I have an application written in .Net 2.0 using the SQL Server RMO .Net assemblies to create the replication on the SQL Server and to control the synchronization between the publisher and subscribers. I have installed the application on a server that only has the following components install on it:
Microsoft SQL Server Native Client
Microsoft Core XML Services (MSXML) 6.0
Microsoft SQL Server 2005 Management Objects Collection
When I run application everything works until I try to synchronize a subscriber, I get the following error: Class not registered.
I tracked down the clsid which it can€™t find to be this:
1E6ADC03-1A05-4DF0-B627-3DAE0F6DA188.
This is listed to be the following class: (Microsoft SQL Merge 9.0) SQLMerge.SQLMerge.3 which located in the following dll file: sqlmergx.dll.
Is there a separate install package that I need to run to get this, sqlmergx.dll and other dependent libraries installed? Or do I have to have SQL Server Services installed on this server because I tried to install only the SDK from the server install on this server and then the client tools and still get the same error when trying to synchronize between the publisher and subscriber.
Or is there something missing with our RMO .Net assemblies?
View 1 Replies
View Related
Jun 1, 2007
I have a DTS package (stored in a .dts file) that was created in SQL Server 2000 and I am trying to work with it in SQL 2005. When I try to import it into the Legacy > Data Transformation Services node in Management Studio, I get a window that reads "Class Not Registered (Microsoft Data Transformation Services (DTS) Package)". I get the same error if I try to just execute the package itself from a query window.
I have Legacy Support installed, and I also have Integration Services installed.
Any ideas? We have three installations of SQL 2005 and I am getting the same error on all of them.
View 1 Replies
View Related
Jan 30, 2007
Hi
I have a package the connection of which is defined in a config file. When the source is on SQLserver, the package executes fine but when i change the connection to Oracle then i am getting this error.
TITLE: Microsoft Visual Studio
------------------------------
Error at DMND_PROBS_EXTRACT [Connection manager "DLWSDV18.PM"]: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error at DMND_PROBS_EXTRACT [DEMANDPROBLEMDETAILS [1]]: The AcquireConnection method call to the connection manager "DLWSDV18.PM" failed with error code 0xC0202009.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
Please let me know if theres any solutions.
Thanks,
Vipul
View 3 Replies
View Related
Nov 2, 2015
Unable to save a maintenance plan in sql server 2005, SP3. Error is class not registered.
View 2 Replies
View Related
May 6, 2015
I am using SSIS 2008 R2 & SQL Server 2008 R2. When I run the package in bids it runs fine but when I try to execute this package from agent job I get the below error message. In the job execution options I tried using 32-bit runtime that didn't work either.
Connection String for Ole db source"Data Source=Test;Initial Catalog=DB_SSIS;Provider=SQLNCLI10.1;Integrated Security=SSPI;Application Name=SSISDataLoad;"
Error Message:
Executed as user: Domainusername. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4033.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.  Â
Error:     Code: 0xC0209302    Source: SSISDataLoad Connection manager "DB_SSIS"    Description: SSIS Error Code DTS_E_OLEDB_NOPROVIDER_ERROR. The requested OLE DB provider
SQLNCLI.1 is not registered. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". Code: 0xC020F42A . Source: SSISDataLoad Connection manager "DB_SSIS"    Description: Consider changing the PROVIDER in the connection string to SQLNCLI10 or visit
View 4 Replies
View Related
Dec 31, 2005
Hello, I need some help with installing release copies of SQL05(+SSIS) and VS05 on Win03R2. It is very frustrating when a basic install fails. I€™ve been going round and round with this. M$ support has not been of help yet.
I have a new development box for SQL05/VS05 development, and when I do a clean install of release software from MSDN: Windows Server 2003 R2 ent; SQL Server 2005 dev; Visual Studio 2005 pro I find that the "save to server" in SSIS (and other utilities that save a package) fails with a non-informative message *No Description Found* (see error text below).
To setup this box I install Win03R2 first, promote it to a Active Directory DC (the one and only DC in a test forest), then install VS05 onto the E: drive. Note, I must install VS05 first (before SQL05) so that all components get installed to the RAID5 *E:* drive. If SQL05 is installed first then VS that comes with SQL gets installed on to C: (no way I see to get around this) then the full VS05 pro gets forced to install on the C: drive.
Then I install SQL05 (with everything including SSIS). At this point every thing works fine, packages can be saved ok.
If I then install VS05 again so that all settings of VS05 are as expected of a standard VS05 install (not the SQL version) then the problem with saving packages arises.
If the error message was a little more informative, I might be able to track down the source of the problem. Please help! I have tried a bunch of things - creating credentials, proxies, using the most privileged accounts possible, etc.
Thanks, MikeC
Error from create SSIS package (save to server):
===================================
No description found (Microsoft Visual Studio)
------------------------------
Program Location: at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServerAs(Package package, IDTSEvents events, String packagePath, String serverName, String serverUserName, String serverPassword) at Microsoft.DataTransformationServices.Controls.PackageLocationControl.SavePackage(Package package) at Microsoft.DataTransformationServices.Design.Controls.PackageSaveCopyForm.PackageSaveCopyForm_FormClosing(Object sender, FormClosingEventArgs e)
===================================
Error from copy db wizard:
===================================
No description found (Copy Database Wizard)
------------------------------
Program Location: at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServerAs(Package package, IDTSEvents events, String packagePath, String serverName, String
serverUserName, String serverPassword) at Microsoft.SqlServer.Management.CopyDatabaseWizard.PackageCreator.SavePackage()
===================================
View 3 Replies
View Related
May 12, 2006
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
View 3 Replies
View Related
Apr 21, 2008
Dear all,
I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ?
Thanks in advance.
Best regards,
Hery
View 22 Replies
View Related
Mar 6, 2008
Hello Chaps,
I am using vb.net 2005 and SQL Server 2005.. I have deployed some of my packages on the server.. Now if i am trying execute packages with SSIS object model from any of developement PC they are executing perfectly. But as soon as i am trying to execute them from client pc - where no any component except (.netframwork) -- i am getting the follwoing error:
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}
Can any one help me out..? i have gone through some of the article stating that SQL client componet must be installed on the computer from where app runs...
Is there any other solution to use SSIS object model...
Let me know if any one you have...!
Thanks,
Tarang Pandya
View 4 Replies
View Related
Mar 20, 2001
Hi
I have a Win2K SP1 server running SQL 7. Whenever I try to create a DTS package, I get a box headed "DTS CoCreateInstance" with "Error in the DLL" as the box text. I have tried removing and re-installing SQL 7 and have also applied SQL SP 1,2 & 3. There are no errors in the event log, just the popup error outlined above.
Has anyone seen this error, and is there a fix?
Thanks
Simon Thomas
CommArc Consulting Ltd
View 1 Replies
View Related
Feb 8, 2006
I have an SSIS package which calls two other SSIS packages as part of it's control flow (using the Execute Package task). Both packages are stored in the same parent folder on the same server. The first child package runs successfully, the second does not. It ran fine for days until yesterday. Not sure what I might have done. I have tried to delay validation and recreate the connection. No go. Has anyone else run into this. I am running SQL 2005 RTM and VS 2005 RTM on XP Pro SP2. Any suggestions would be welcome.
View 9 Replies
View Related
Jan 7, 2008
I have a server with MSDE 2000 installed onto it. I also installed SQLEXPR_TOOLKIT.EXE . Now there is a DTS package present on that server saved in the DB. How can I alter that package? And if that's not possible: how can I save the package to a file so I can transfer that file to my development machine?
Thanks in advance,
Stijn Verrept.
View 3 Replies
View Related
Nov 5, 2014
I get an error when trying to open an SSIS package from TFS using Visual studio 2014..
This is the error:
error loading package failed to decrypt protected xml node DTS:Password Key not valid for use in specified state you may not be authorized to view this information
This package has been developed by a person who left the company. I think he had admin permissions on the servers.
View 2 Replies
View Related
Apr 15, 2015
I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
[code]....
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
View 7 Replies
View Related
Jun 20, 2006
I have a package (PackageA) with an Execute Package Task that execs PackageB. When I run PackageA I get this error on the Execute Package Task :
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
PackageB has 'EncryptSensitiveWithUserKey' ProtectionLevel. I'm providing passwords in the dtsConfig so I'm guessing I should change it to 'DontSaveSensitive'?
Interestingly, PackageA also has 'EncryptSensitiveWithUserKey' ProtectionLevel, but I don't get an error about PackageA, just on the task that runs PackageB.
(SP1 is installed).
View 9 Replies
View Related
Aug 6, 2007
Hi,
I'm trying to create a SSIS package. I have used OLEDBSource adapter to get the source table's data and transferring the data to an OLEDBDestination adapter. I tried but I'm facing the problem in mapping the metadata contents.
My code:
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
static void Main(string[] args)
{
// Create a new package
Package package = new Package();
package.Name = "OLE DB Transfer";
// Add a Data Flow task
TaskHost taskHost = package.Executables.Add("DTS.Pipeline") as TaskHost;
taskHost.Name = "Transfer Table";
IDTSPipeline90 pipeline = taskHost.InnerObject as MainPipe;
// Get the pipeline's component metadata collection
IDTSComponentMetaDataCollection90 componentMetadataCollection = pipeline.ComponentMetaDataCollection;
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 oledbSourceMetadata = componentMetadataCollection.New();
// Associate the component metadata object with the OLE DB Source Adapter
oledbSourceMetadata.ComponentClassID = "DTSAdapter.OLEDBSource";
// Instantiate the OLE DB Source adapter
IDTSDesigntimeComponent90 oledbSourceComponent = oledbSourceMetadata.Instantiate();
// Ask the component to set up its component metadata object
oledbSourceComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerSource = package.Connections.Add("OLEDB");
connectionManagerSource.Name = "OLEDBSource";
// Set the connection string
connectionManagerSource.ConnectionString = "provider=sqlncli;server=HSCHBSCGN25008;integrated security=sspi;database=Muthu_SSIS_Testing";
// Set the connection manager as the OLE DB Source adapter's runtime connection
IDTSRuntimeConnection90 runtimeConnectionSource = oledbSourceMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionSource.ConnectionManagerID = connectionManagerSource.ID;
// Tell the OLE DB Source adapter to use the SQL Command access mode.
oledbSourceComponent.SetComponentProperty("AccessMode", 2);
// Set up the SQL command
oledbSourceComponent.SetComponentProperty("SqlCommand", "select * from EmployeeTable");
// Set up the connection manager object
runtimeConnectionSource.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerSource);
// Establish the database connection
oledbSourceComponent.AcquireConnections(null);
// Set up the column metadata
oledbSourceComponent.ReinitializeMetaData();
// Release the database connection
oledbSourceComponent.ReleaseConnections();
// Release the connection manager
runtimeConnectionSource.ReleaseConnectionManager();
// Add a new component metadata object to the data flow
IDTSComponentMetaData90 oledbDestinationMetadata = componentMetadataCollection.New();
//Associate the component metadata object with the OLE DB Destination Adapter
oledbDestinationMetadata.ComponentClassID = "DTSAdapter.OLEDBDestination";
// Instantiate the OLE DB Destination adapter
IDTSDesigntimeComponent90 oledbDestinationComponent = oledbDestinationMetadata.Instantiate();
// Ask the component to set up its component metadata object
oledbDestinationComponent.ProvideComponentProperties();
// Add an OLE DB connection manager
ConnectionManager connectionManagerDestination = package.Connections.Add("OLEDB");
connectionManagerDestination.Name = "OLEDBDestination";
// Set the connection string
connectionManagerDestination.ConnectionString = "provider=sqlncli;server=HSCHBSCGN25008;integrated security=sspi;database=Muthu_SSIS_Testing";
// Set the connection manager as the OLE DB Destination adapter's runtime connection
IDTSRuntimeConnection90 runtimeConnectionDestination = oledbDestinationMetadata.RuntimeConnectionCollection["OleDbConnection"];
runtimeConnectionDestination.ConnectionManagerID = connectionManagerDestination.ID;
// Tell the OLE DB Destination adapter to use the SQL Command access mode.
oledbDestinationComponent.SetComponentProperty("AccessMode", 2);
// Set up the SQL command
oledbDestinationComponent.SetComponentProperty("SqlCommand", "select from EmplTable");
// Set up the connection manager object
runtimeConnectionDestination.ConnectionManager = DtsConvert.ToConnectionManager90(connectionManagerDestination);
// Get the standard output of the OLE DB Source adapter
IDTSOutput90 oledbSourceOutput = oledbSourceMetadata.OutputCollection["OLE DB Source Output"];
// Get the input of the OLE DB Destination adapter
IDTSInput90 oledbDestinationInput = oledbDestinationMetadata.InputCollection["OLE DB Destination Input"];
// Create a new path object
IDTSPath90 path = pipeline.PathCollection.New();
// Connect the source and destination adapters
path.AttachPathAndPropagateNotifications(oledbSourceOutput, oledbDestinationInput);
IDTSInput90 input = oledbDestinationInput;
IDTSVirtualInput90 vInput = input.GetVirtualInput();
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the destination
// to add each available virtual input column as an input column.
oledbDestinationComponent.SetUsageType(
input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READONLY);
}
foreach (IDTSInputColumn90 col in oledbDestinationInput.InputColumnCollection)
{
IDTSExternalMetadataColumn90 exCol = oledbDestinationInput.ExternalMetadataColumnCollection[col.Name];
oledbDestinationComponent.MapInputColumn(oledbDestinationInput.ID, col.ID, exCol.ID);
}
Console.WriteLine("done");
Console.ReadKey();
// Save the package
//Application application = new Application();
//application.SaveToXml(@"c:OLEDBTransfer.dtsx", package, null);
}
While debugging, I'm getting exception (ELEMENTNOTFOUND) at this line
IDTSExternalMetadataColumn90 exCol = oledbDestinationInput.ExternalMetadataColumnCollection[col.Name];
because metadata have no appropriate column to map with the destination component.
Any one help me to resolve this issue.
Regards,
kris
View 1 Replies
View Related
Jul 11, 2005
An oddity has appeared in my MSSQL 8.0 SP3a instance; DTS packages which were working fine in the past can no longer be opened in Designer. Even when attached to the instance with the ‘sa’, I get the following errors:
**Package Error
Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description: The System cannot find the file specified.
**DTS Designer Error
The selected package cannot be opened. The DTS Designer has been closed.
The packages themselves continue to run properly even through Agent, but when I attempt to open them for view or edit, the above errors appear. Note, not all DTS packages are displaying this behavior and there appears to be no obvious pattern to which packages are affected. When editing on the server itself, the packages can be opened and edited. Another peculiarity noted while looking into this one; while editing on the server directly, the option to save a given package in the Meta Data Services location is no longer an option. It is available when attached to the instance form a workstation.
Anyone seen this type of behavior before?
Thanks in advance!
View 5 Replies
View Related
Mar 4, 2008
Hi
My Server having DTS package even Job failing saying
"Error string: The specified DTS Package ('Name = 'ERP_Mater_Encript_Data_Move'; ID.VersionID = {[not specified]}.{T0I37w32-AB51-1SA4-9495-AcE6SSS4a321}') does not exist"
Please help regarding.
View 3 Replies
View Related
Oct 16, 2007
I am attempting to link a table to an .ADP using an ODBC link. When I run through the link table wizard, I hit 'finish' and this is the error I get.
[edited to add]: I am running MS Access 2003.
Can anyone help with this or tell me what this error message's translation is? Thanx.
Sean
View 1 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related