Error During Processing Of The CommandText Expression Of Dataset
Oct 17, 2007
An error has occurred during report processing.
Cannot set the command text for data set 'ScoreboardOLAP'.
Error during processing of the CommandText expression of dataset €˜ScoreboardOLAP€™
Can anyone help at all here? I've seen about 10 articles on this one but none appear to be relevant. I have a complex report comprising many sub-reports which runs successfully in a development environment. When deployed to an environment which comprises a separate report sever and report server DB I get the above error even when I try and browse to any of the sub-reports.
The sub-report is using an OLEDB connection to an SSAS DB and its command text is set as:-
=Code.GetQueryString(parameters)
Where GetQueryString is a function in the code section of the report which returns some MDX based on the supplied parameters. I obviously know the function works because it works in development mode.
I have tried to determine what is going on from the logs but the only messages I get are those above. I've set the data sources on the server up to use valid Windows Credentials stored on the server so I don't believe the issue is one of authentication
Any thoughts or tips in helping to diagnose the cause of the problem would be greatly appreciated.
Which component should be used to process dataset as a whole, and not on per row basis? I have need to process dataset conditionally (condition based on dataset), e.g. if a special row is present in dataset than dataset should be processed in a special way. Should I maybe use one Script Transformation to determine if dataset satisfies condition (and store that result into a variable), and then based on that condition (variable value) perform or not processing (using Conditional Split and Script Transformation)?
I want to do conditional processing depending on values in the rows of a CTE. For example, is the following kind of thing possible with a CTE?:
WITH Orders_CTE (TerritoryId, ContactId) AS ( SELECT TerritoryId, ContactId FROM Sales.SalesOrderHeader WHERE (ContactId < 200) ) IF Orders_CTE.TerritoryId > 3 BEGIN /* Do some processing here */ END ELSE BEGIN /* Do something else here */ END
When I try this, I get a syntax error near the keyword 'IF'
Any ideas? I know this kind of thing can be done with a cursor but wanted to keep with the times and avoid using one!
I have been getting to grips with writing a custom data processing extension for using a supplied dataset. I have got it working OK so far, but I don't see how to make use of relational data. There's plenty of code for walking through the fields, but nothing to walk through the tables. Since this clearly has to be possible can someone tell me where I'm going wrong?
So I have this great MDX query that runs fine in Management Studio and I need to use it in a report. The statement contains a LookupCube call. I've tried everything but I am unable to get access to the fields in the dataset when I go to design the report.
I've tried adding the =" in the beginning and the " at the end. I've also tried escaping the " with "". Everything I've tried however never gives me the ability to access the 'PREV BATCH ELIGIBLE BALANCE' field.
Before you ask, I'm using LookupCube because the below code is just a piece of a much large MDX query. I just figured I'd start small and see how it goes.
WITH MEMBER [Measures].[PREV BATCH ELIGIBLE BALANCE] AS LookupCube("CLAIMS"," ([Measures].[TOTAL BALANCE] ,[CLIENT].[ATC Healthcare, Inc.] , [ELIGIBILITY].[TRUE], [ROLL_FWD].[TRUE], " + [Batch].PrevMember.UniqueName + ")") SELECT { [Measures].[PREV BATCH ELIGIBLE BALANCE] } ON COLUMNS, { [BATCH].[MyComp Healthcare, Inc.].Children } ON ROWS FROM [CLAIMS]
Now I can query dataset and bind to report parameter. But I have some problem about setting default value. I don't know, how to select max value from dataset by using expression.
Example, I query disticnt year from my table. The result has 2 years "2007" and "2008" select distinct year(mytime) as myyear from mytable.
I set available parameter by using this dataset. Then, I set default value for this parameter by the other dataset ...
select max (distinct year(mytime)) as maxyear from mytable.
I want to select max value by using expression, not select max by using dataset.
Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls as connectionString works
However - I'm trying to deploy the package - and trying to use expression: @[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls" which causes the same error to occur
(Same error with other Excel source also: Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1 )
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
This problem happens on this particular machine and doesn't happen on other machines that I have. And I think this problem belongs to this forum. Because the problem is triggered by a special setting in the connection string. I followed the steps of threads including Xinwei Hong's instruction for fixing this error(26) but has no luck.
The problem occurs when I call SqlConnection.Open().
I am using window xp, sql2000. the named instance is on local machine, my connection string is like
Whenever I change Asynchronous Processing=true into Asynchronous Processing=false, the problem is gone.
This problem also occurs when I use Visual Studio - Server Explorer - Add Connection dialog - Advanced button - Advanced Properties window where you can set Asynchronous Processing property to true.
Dim MiSQL As String = "INSERT INTO tabla1(ID,Proveedor,Tipo) VALUES (@IDCentro,@Proveedor,@Tipo)" ................ cm.Parameters.Add(New SqlParameter("@IDCentro", SqlDbType.Int, 4)).Value = 15 cm.Parameters.Add(New SqlParameter("@Proveedor", SqlDbType.NVarChar, 50)).Value = "IBM" cm.Parameters.Add(New SqlParameter("@Tipo", SqlDbType.TinyInt, 1)).Value = 35Hi friens, its possible to get the string with the vaules of parameters changed?, i mean get this string in code:INSERT INTO tabla1(ID,Proveedor,Tipo) VALUES (15,IBM,35);I tried with CommandText but in this string are the variables and not the values....thx a lot.
PRAdapter.SelectCommand.CommandText = "SELECT * FROM dbo.Customer WHERE Cname = 'بهمن' ";PRAdapter.Fill(table); The table in the DataBase has a complete row contains this column. But count of rows of the table in C# is 0 (zero). I don't know why. Thanks for your answer!
Strangest thing is happening...Im building a select query..when I execute the query I get the results I want...But then I add the following code (yes am assigning the cmdText to myCommand etc, that all works):cmdText += "LookingForIDs LIKE '%,@LFID,%' "mycommand.Parameters.Add(New SqlParameter("@LFID", s(i)))(I used the debugger and this code is executed)the s() is an array of String.Now..I would expect that the @LFID part is replaced with the value of s(i)..in this case it's "2"Now when I execute the query...no results are found anymore....BUT when I execute the query in MS SQL Management Studio and replaced the @LFID manually with "2" it DOES work...and returns the right resultsAlso when I replaced the @LFID in the code with 2 so that it becomes:cmdText += "LookingForIDs LIKE '%,2,%' " it works....So my best guess is that for SOME reason the @LFID doesnt get replaced
Hi , Iam new to vs2005. Iam trying to integrate Authorize.net for transactions in my site. When i tested it worked fine .But when i put it in live for Amex cards it is giving me sqlerror. Here is my code using System; using System.Data; using System.Configuration; using System.Collections; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.Data.SqlClient; using System.Net; using System.IO; public partial class Paymentprocessing : System.Web.UI.Page {SqlConnection objConn = new SqlConnection(ConfigurationManager.AppSettings["strConn"]); string permLevel = "";protected void Page_Load(object sender, EventArgs e) {if (Session["displayname"] == null || Session["franchiseid"] == null || Session["username"] == null) {Response.Redirect("Default.aspx"); } else {lblusrname.Text = Session["displayname"].ToString(); }string strSelectquery = ""; strSelectquery = "select userPermissionLevel,Franchise_ID from tblUsers where User_Name='" + Session["username"].ToString()+"'";SqlCommand objCmd = new SqlCommand(strSelectquery, objConn);SqlDataReader objDr; objConn.Open(); objDr = objCmd.ExecuteReader(); if (objDr.Read()) { permLevel = objDr[0].ToString(); } objDr.Close(); objConn.Close();if (int.Parse(permLevel) == 99) {pnlRefundCC.Visible = true; pnlRefundCA.Visible = true;pnlTransact.Visible = true; pnlPaymentInfo.Visible = true;pnlCardifo.Visible = true; } else {pnlPaymentInfo.Visible = true; pnlCardifo.Visible = true;pnlRefundCC.Visible = false; pnlRefundCA.Visible = false;pnlTransact.Visible = false; } }protected void RadioButton3_CheckedChanged(object sender, EventArgs e) {pnlTransact.Visible = false; pnlPaymentCCA.Visible = false;pnlOrgTransID.Visible = true;pnlCardifo.Visible = true;
Here is the error iam getting server Error in '/' Application. ----------------ExecuteNonQuery: CommandText property has not been initialized Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: ExecuteNonQuery: CommandText property has not been initializedSource Error: Line 431: SqlCommand cmd1 = new SqlCommand(strInsert,objConn);Line 432: objConn.Open();Line 433: cmd1.ExecuteNonQuery();Line 434: objConn.Close();Line 435: Source File: d:Websitesserviceinfo.comsecurePaymentprocessing.aspx.cs Line: 433 Stack Trace: [InvalidOperationException: ExecuteNonQuery: CommandText property hasnot been initialized] System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async) +873524 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +72 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 Paymentprocessing.btnSubmit_Click(Object sender, EventArgs e) in d:Websitesxyassss.aspx.cs:433 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102 ----------------Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
I keep trying to insert a Value in a field called Category and DateTIme in a field called date but I keep getting this error The datetime field in the database is a data type DateTime. I converted the varible into a ToString, I put it in a Convert.In32() method, I even set the varible to a DateTime datatype. doesnt work. whats wrong ? Server Error in '/WebSite1' Application.
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS1502: The best overloaded method match for 'System.Data.SqlClient.SqlParameterCollection.AddWithValue(string, object)' has some invalid argumentsSource Error:
Line 33: cmd.Parameters.AddWithValue("@Category", NewCat.Text); Line 34: DateTime Date = DateTime.Now; Line 35: cmd.Parameters.AddWithValue("@Date",Date.ToString); Line 36: Line 37: trySource File: c:Documents and SettingsCompaq_OwnerMy DocumentsVisual Studio 2008WebSitesWebSite1AdminCat.aspx.cs Line: 35 Show Detailed Compiler Output:
I'm having a ton of trouble with a dataset. It builds at design time,but fails at runtime, saying:---------------------------Processing Errors---------------------------An error has occurred during report processing.Cannot set the command text for data set 'ds_Legal_Entity'.Error during processing of the CommandText expression of dataset'ds_Legal_Entity'.---------------------------OK---------------------------Below is the CommandText for ds_Legal_Entity that gives me the error:="SELECT DISTINCT dbo.t_d_legal_entity.legal_entity_desc FROMdbo.t_d_legal_entity INNER JOIN dbo.t_f_month_summary ONdbo.t_d_legal_entity.legal_entity_key =dbo.t_f_month_summary.legal_entity_key WHERE(dbo.t_f_month_summary.acctg_mth_key = " &Parameters!acctg_mth_key.Value & ")" &IIF(Parameters!BusUnitKey.Value = 0,""," AND(dbo.t_f_month_summary.bus_unit_key = " & Parameters!BusUnitKey.Value &")") & " ORDER BY dbo.t_d_business_unit.legal_entity_desc"If I delete everything after " & Parameters!acctg_mth_key.Value & ")",I won't get the error, so I assume that's where the problem lies. Ijust need another pair of eyes to see it.Thanks!Mike
I have done a SQL statement INSERT for my coding. The program compiled and run the insertion with no error occurred. But after the compilation I found out that my database is not populated at all.
I tried the data insertion using the manual query, and I work perfectly.
So the problem now is that I do not know why my codes did not insert the data into my database. Will like to get some advise. Thanks
My codes are pasted in http://www.pastebin.ca/320102 The Debug.Writeline in the code is in http://www.pastebin.ca/320108
When I process a new cube I recieve an error "Error (211): Unknown dimension member ' 8'; Time: 8/11/00 1:09:45 PM". Any ideas about what this error is about ?
Hi all, I have created a report on the client and want to deploy it on the server. I am able to deploy the report on the Server but whern i am trying to see that report from the server i am getting error.
The Error Is : -
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'DataSource1'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I created a report using visual studio and published it in dev server which is in another machine. Then I connected a shared data source which was already publisehd earlier by someone else. I use a stored proceedure for the report which has two FromDate and Todate parameters. But once I deploy the report, i can not see it on report manager. When I try to view it, I get the following error
.
An error has occurred during report processing.
Query execution failed for data set 'DataSet1'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Errors in the high-level relational engine. The data source view does not contain a definition for the 'WeightRecieved' column in the 'dbo_factPurchases' table or view.
The problem is WeightReceived IS defined in my DSV so I don't know what to do about this error.
Whenever OnError is triggered I send an email out notifying the appropiate personel. Is there a way I can capture and include the error message in the subject of the email easily? Thanks in Advance.
In the previous thread I said when I want to create a model and structure, in process time one error appeared that I said. Now I think this error is because of my structure now I€˜ve one request i send my project and please see that and say what is this error? Thanks a lot. For creating mining structure and mining model I use the code of chapter14 file that one person had put for me
Please run this project and then say whay when I process my model ,the process do incorrectly. in this code button 1 is for showing the anme of data bsase and table and column of that in currenyt server and then with button 2 i want ot creat model and struture and data source data source view now please run this code and then say whay i have error for process model . please run and answer me thanks a lot
$exception {"Arithmetic overflow error converting expression to data type smalldatetime. The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException} occurs here is my code protected void EmailSubmitBtn_Click(object sender, EventArgs e) { SqlDataSource NewsletterSqlDataSource = new SqlDataSource(); NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text; NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
I just finished migrating SQL 2005 - 2012 and I am having issues processing my cubes. I included the error message below with generic names, but I think it should be transparent. I seem to be having an issue with one of the logins, but which one. The error message points to "domain_nameserver_name$" with a $ at the end. I am assuming this is a SQL login? I have included the error message below:
I'm using SQL Server 2005 Standard Edition, and when I try to process a Decision Tree with more or less 50 input variables I get the following warning:
"Informational (Data mining): Automatic feature selection has been applied to model, TREE_2 due to the large number of attributes. Set MAXIMUM_INPUT_ATTRIBUTES and/or MAXIMUM_OUTPUT_ATTRIBUTES to increase the number of attributes considered by the algorithm."
I've tried to set MAXIMUM_INPUT_ATTRIBUTES to 10 and then there's an error saying: "The 'MAXIMUM_INPUT_ATTRIBUTES' data mining parameter is not valid for the 'TREE_2' model."
I have created several reports and deployed them successfully. However, when I return to view the reports some time later I receive the following error message:
An error has occurred during report processing.
Query execution failed for data set 'DataSet1'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors The only way I have been able to get round the issue is to re-deploy the reports. All reports are executed from Stored Procedures.