Error During Set Partner Statement (SP1)
Apr 21, 2006
Hi!
I have the following error during setting partner on mirror server
Msg 1431, Level 16, State 4, Line 1
Neither the partner nor the witness server instance for database "masterserver" is available. Reissue the command when at least one of the instances becomes available.
The partner is available through telnet. I've also checked ports vai netstat and have no found errors.
There are two noteworthy erros in the error log at mirror server
Error: 9642, Severity: 16, State: 3.
and
An error occurred in a Service Broker/Database Mirroring transport connection endpoint, Error: 8474, State: 11. (Near endpoint role: Target, far endpoint address: '')
Security settings it seems are set accurately.
View 1 Replies
ADVERTISEMENT
Jul 23, 2005
Hi all,Here is the table and DML statmentsCREATE TABLE [jatpartnerMst] ([rowid] [int] ,[partnerid] [int] NULL ,[mcstat] [int] DEFAULT (1), -- 1 Pending ,2 Approved[sf] [varchar] (20))INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(1,1,2,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(2,1,2,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(3,1,2,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(4,1,2,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(5,1,1,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(6,1,2,'inactive')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(7,1,2,'inactive')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(8,1,2,'inactive')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(9,2,2,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(10,2,1,'active')INSERT INTO [jatpartnerMst]([rowid],[partnerid],[mcstat],[sf])VALUES(11,1,2,'active')What I wish to find is the latest record on the top and it's otherrecordse.g If partnerID 1 is changed it goes to the bottom of the table , atany given time I am interested only in max(rowid) for a partner withstat 1 or 2I am using this queryselect * from jatpartnerMst where rowid in (select max(rowid) fromjatpartnermst where mcstat in (1,2) group by partnerid,mcstat )This query does not give me the latest.On using this queryselect * from jatpartnerMst where rowid in (select max(rowid) fromjatpartnermst where mcstat in (1,2) group by partnerid,mcstat )order by rowid descThe partner's two records get seperated . I wish to show them followingone another.So the output should be1112active511active922active1021active11 & 5 rowids are following each other because they are rows of samepartner and 11 is the most recent row [ because new rows are insertedat the end]Is it possible to do the above using single queryI am using cursor to do the same.With Warm regardsJatinder
View 11 Replies
View Related
Apr 25, 2007
Hi, i am working with SMO object,
At the time of accessing remote(LAN) database server I encountered the
following message: "MirroringPartnerInstance" : Undefined error.
I m not able to figure out whats the exact problem is..
i had gone through the following link too but doesn't make any sense to me :
msdn2.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.database.mirroringpartnerinstance.aspx
All i understand is i need to set some property of mirroring partner.
Does any on have any idea how to resolve this problem
Thanking you all in advance
Vivek
View 2 Replies
View Related
Oct 25, 2006
I've read that when this run's, it removes all db mirroring information on that db. What exactly does it remove?
Here's my senario:
We are using SQL 2005€™s db mirroring process. We are using the certificate method of authentication between the principle and the mirror db€™s.
My question is that when the ALTER DATABASE dbname SET PARTNER OFF is run, does it remove these certificate settings as well? In other words when I want to enable the db mirroring, will I need to recreate these certificates or just recreate the endpoints to use these certificates?
View 5 Replies
View Related
Oct 11, 2012
We have a database,which has been mirrored.Also,We have an application which uses OpenRowSet to connect to this database.
Is it possible to set "Failover partner" in OpenRowSet connection string,so when we failover from Prinicple server to the mirrored database,The application still will continue to work?
Example:
select
*
from openrowset(
'SQLOLEDB',
'Data Source=Server1;Failover Partner=Server2;trusted_connection=yes;','select top 10 from Database1.dbo.Table1'
) temp
View 1 Replies
View Related
May 24, 2006
I need to connect to mirrored SQL servers (Developer Edition) using OLE DB, I tried both OLE DB and ODBC, but it doesn't work
I used connection ODBC string:
Driver={SQL Native Client};Server=10.0.1.161;Failover Partner=10.0.1.162;Uid=test;Pwd=test;Database=TestDB
if server 161 is principal and server 162 mirror, it connects ok, but
when I exchange server roles, connect fails (the error message is:
Cannot open database "TestDB" requested by the login. The login failed.
in LOGIN)
the connect string using OLE DB is:
Provider=SQLOLEDB.1;Persist Security Info=False;User
ID=test;Password=test;Failover Partner=10.0.1.162;Initial
Catalog=TestDB;Data Source=10.0.1.161;Use Procedure for Prepare=1;Auto
Translate=True;Packet Size=4096;Use Encryption for Data=False;Tag with
column collation when possible=False
error message is the same
when I try to connect using VS 2005 using connection string
Database=TestDB;User Id=test;Password=test;Server=10.0.1.161;Failover
Partner=10.0.1.162, it works OK
i have installed SQL server 2005 (on local - client machine) with SQL Native Client and also
SQL Server service pack 1
Is there any way how to connect from OLE DB?
Thanks
View 3 Replies
View Related
Mar 27, 2008
We have a pair of SQL 2005 SP2 with Rollups clusters. We have a series of DB's that we are migrating from an existing SQL 2000 cluster. I have scripted the process, however on one of the test DB's, it goes to "In Recovery" as soon as I issue the Set Partner statement. There are other DB's on the same cluster mirrored with no problems. As we have a bunch of DB's to migrate, I want to figure out what would cause it to start a recovery. After the initial restores are done, it is in "Restoring" for a status so everything works up to that point.
Thanks
Jon Macy
View 3 Replies
View Related
Oct 25, 2007
Hello,
Am I reading it wrong or can I have a developer edition as a partner?
http://www.microsoft.com/technet/prodtechnol/sql/2005/dbmirror.mspx Please take a look at the Database Mirroring and SQL Server 2005 Editions section.
Anyone knows?
Thank you.
View 6 Replies
View Related
Dec 27, 2006
i tried to set up mirroring having only principal and mirror. mirroring endpoints were easily created for both servers. when i try to add the partner name it responds with
Msg 1418, Level 16, State 1, Line 1The server network address "TCP://machine1.domain.com:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
On the log of machine1 i see,
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed with error: 'Connection handshake failed. The login 'NT AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint. State 84.'.
i have similar problems as in
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1020144&SiteID=1
i am a sysadmin on both SQL Servers and have connect permission on both end points.
Both the endpoints are in started state and listening to all IP's
Both services are as 'Local System'
As per what was mentioned in the above post to add a 'domain/machine$' user did not help.
Tried using setspn.exe to add a new SPN MSSQLsvc/<HOST>:<MIRRORINGPORT> did not work. an ERROR comes 'not enough privileges'
setup shows the following SPN only on both
HOST/Machine name
HOST/Machine name.Domin.com
MSSQLSvc/Machine name.Domin.com:1433
SMTPSVC/Machine name
SMTPSVC/machine name.Domain.com
and on second machine
HOST/Machine name
HOST/Machine name.Domin.com
MSSQLSvc/Machine name.Domin.com:1433
any Clues?
View 1 Replies
View Related
May 10, 2007
Hi
Sincere Apologies for the cross posting. Did not realize that there is a specific DB Mirroring group and so posted initially in the High Availability group. Here is the original post
Hi
I am trying to test DB Mirroring connectivity and running into a road block. using SQLOLDB in my connection string the failover partner keyword seems to be not recognised when the failover occurs and the connectivity fails. The same however works with the SQL Native client driver.
Can any expert please let me know what I am doing wrong and what is the right connection string for the OLEDB one?. I also tried using different flavors of FailoverPartner (like Failover Partner, FailoverPartner etc) to make it work with OLEDB but still could not connect with SQLOLEDB provider.
SQLNCLI works with no issues at all.
Connection string code samples included.
--Code that does not work
Code Snippetconnstring = "Provider=SQLOLEDB;network=dbmssocn;Data Source=Server1SQLInst1;FailoverPartner=Server2SQLInst2;Initial catalog=mydb;INTEGRATED SECURITY=SSPI;"
Code Snippetconnstring = "Provider=SQLNCLI;network=dbmssocn;Data Source=Server1SQLInst1;FailoverPartner=Server2SQLInst2;Initial catalog=mydb;INTEGRATED SECURITY=SSPI;"
Any help is appreciated.
Thanks
AK
View 3 Replies
View Related
Jan 27, 2006
I am getting this error while trying to setup mirroring.
"Neither the partner nor the witness server instance for database "shop" is available. Reissue the command when at least one of the instances becomes available. (Microsoft SQL Server, Error: 1431)"
I am just using principal and mirror server, there is no witness server. I have tried fully qualified name and ip for the servers also. I can connect from the principal server to the mirror server using the management studio and it also creates endpoints on prinicipal and witness. But then gives me an error that it cannot find the instance of the mirror server and if I try again it gives the error above. I can also telnet to port 5022.
I have used -T1400 as the startup parameter.
I did the backup and recovery based on this link http://msdn2.microsoft.com/en-us/library/ms189053.aspx and the mirror server is in recovery mode now.
View 20 Replies
View Related
Jun 23, 2014
Running this query in DR server to start SQL mirroring but encountered an error below.
Query:
use master
go
alter database test set partner= N'TCP://HOSTNAME.DOMAIN.GROUP.INTRANET:5023'
go
Error:
Msg 1452, Level 16, State 6, Line 2
The partner server instance name must be distinct from the server instance that manages the database. The ALTER DATABASE SET PARTNER command failed.
View 2 Replies
View Related
Nov 7, 2006
We were having problems setting up the mirroring, so I did it via command lines. I found out the "alter...set partnership" command works on the mirror server going to the principal, but gets a 1418 error when going from the principal to the mirror.
So if A is the principal and B is the mirror, A to B fails but B to A works.
If I reverse it so that B is the principal and A is the mirror, B to A fails and A to B works.
Any suggestions?
View 3 Replies
View Related
Jul 22, 2014
it is possible to create Linked server with Failover partner option. I can query when primary server and getting the error when I set the DB Fail over. I have tried with following script and also gone through different sources, but failed. Please see the script and error below.
EXEC master.dbo.sp_addlinkedserver
@server = N'MIRRORLink',
@srvproduct=N'',
@provider=N'SQLOLEDB',
@provstr=N'Server=primary;FailoverPartner=mirror;network=dbmssocn;',
[code].....
View 2 Replies
View Related
Aug 23, 2006
I'm trying to run an SSIS package. The package runs on an SQL 2005 server on Win2k3 server. The package tries to connect to another win2k3 server with sql 2000 to retrieve some data. However, I recieve the errormessage shown in the topic.
I found info about modifying the MSDTC security settings under "component services" and did so. I made sure everything was allowed. However, the result was the same. Does anyone have any other idéa about what could cause this problem?
PS. The package works fine if I set up both databases on the same physical machine...
Regards Andreas
View 3 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Sep 21, 2006
When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:
SQL Server Internal Error. Text manager cannot continue with current statement.
The server is running SQL Server 2000 with SP4.
I am really concerned because this is a production sever and there are over 300 users access concurrently.
Please help me to find a solution.
Thanks,
Roshan.
View 8 Replies
View Related
Mar 2, 2007
Hi, I m Trying TO use A sql insert Query but it showing an error
i m trying to insert value in Filed Name PNR from Str.text and Coresspond Field Name PNR1 valuse is 1 less than from pnr.text and PNR1 is a Auto Number Field
my code for insert query is
Dim q1 As OleDb.OleDbCommand = New OleDb.OleDbCommand("insert into res (PNR) values('" & Str.Text & "') where PNR1='" & pnr.Text - 1 & " ' ", con)
and Error is Shown by browser is as follows
Server Error in '/WebApplication1' Application.
Missing semicolon (;) at end of SQL statement.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: Missing semicolon (;) at end of SQL statement.Source Error:
Line 466: con.Open()
Line 467: Dim q1 As OleDb.OleDbCommand = New OleDb.OleDbCommand("insert into res (PNR) values('" & Str.Text & "') where PNR1='" & pnr.Text - 1 & " ' ", con)
Line 468: q1.ExecuteNonQuery()
Line 469: con.Close()
Line 470: End SubSource File: C:InetpubwwwrootWebApplication12.aspx.vb Line: 468 Stack Trace:
[OleDbException (0x80040e14): Missing semicolon (;) at end of SQL statement.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextErrorHandling(Int32 hr) +41
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +174
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +92
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +65
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +112
System.Data.OleDb.OleDbCommand.ExecuteNonQuery() +66
WebApplication1._2.Button2_Click(Object sender, EventArgs e) in C:InetpubwwwrootWebApplication12.aspx.vb:468
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +57
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain() +1277
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
View 3 Replies
View Related
May 24, 2007
SELECT QueryOne.StudentID, Max(QueryOne.Year) AS MaxOfYear, Count(QueryOne.StudentID) AS CountYear, IIf([CountYear]<2,"1","0") AS NewStudent, IIf([CountYear]>1,"1","0") AS ContStudent, IIf(Max([Order]-1)<5,"K-4",Max([Order])-1) AS [Grade Level], Max(Lookupgradelevel.APR_Order) AS Sorted_Grade_LevelFROM Lookupgradelevel RIGHT JOIN QueryOne ON Lookupgradelevel.gradelevel = QueryOne.GradelevelGROUP BY QueryOne.StudentIDHAVING (((Max(QueryOne.Year))=[Forms]![APR]![Year]))ORDER BY Max(Lookupgradelevel.APR_Order);---------------------------------------------------------------------------------------------------I run the above statements in sql server 2005 ,it says that there are errors near "<", and near "Max"Could you help me, thanks.
View 7 Replies
View Related
May 7, 2008
Anyone see any thing wrong with this syntax? Getting an exeption error on the update command:
Incorrect syntax near ','.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near ','.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Incorrect syntax near ','.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +925466
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800118
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1005
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +149
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +404
System.Web.UI.WebControls.SqlDataSourceView.ExecuteUpdate(IDictionary keys, IDictionary values, IDictionary oldValues) +721
System.Web.UI.DataSourceView.Update(IDictionary keys, IDictionary values, IDictionary oldValues, DataSourceViewOperationCallback callback) +78
System.Web.UI.WebControls.DetailsView.HandleUpdate(String commandArg, Boolean causesValidation) +1152
System.Web.UI.WebControls.DetailsView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +440
System.Web.UI.WebControls.DetailsView.OnBubbleEvent(Object source, EventArgs e) +95
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.DetailsViewRow.OnBubbleEvent(Object source, EventArgs e) +109
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
UPDATE tblRMADetail SET ToVendorShipDate =, ToVendorShipTime =, ToVendorShipMethod =, ToVendorTrackingNumber =, Status = WHERE (RMADetailKeyID = @original_RMADetailKeyID) AND (FKRMA = @original_FKRMA) AND (RMANumber = @original_RMANumber) AND (ItemID = @original_ItemID) AND (ItemDescription = @original_ItemDescription) AND (ItemCost = @original_ItemCost) AND (DatePlacedOnRMA = @original_DatePlacedOnRMA) AND (Quantity = @original_Quantity) AND (QuantityFilled = @original_QuantityFilled) AND (QuantityReceived = @original_QuantityReceived) AND (QuantityCancelled = @original_QuantityCancelled) AND (SONumber = @original_SONumber) AND (FKExchange = @original_FKExchange) AND (ToVendorShipDate = @original_ToVendorShipDate) AND (ToVendorShipTime = @original_ToVendorShipTime) AND (ToVendorShipMethod = @original_ToVendorShipMethod) AND (ToVendorTrackingNumber = @original_ToVendorTrackingNumber) AND (ExpectedDate = @original_ExpectedDate) AND (ExpectedTime = @original_ExpectedTime) AND (ExpectedShipMethod = @original_ExpectedShipMethod) AND (VendorReimbursementAmount = @original_VendorReimbursementAmount) AND (ReimbursementDate = @original_ReimbursementDate) AND (Status = @original_Status) AND (ItemSource = @original_ItemSource) AND (BinLocation = @original_BinLocation) AND (AccountNumber = @original_AccountNumber) AND (CustomerRMANumber = @original_CustomerRMANumber) AND (ReceivedFromCustomerDate = @original_ReceivedFromCustomerDate) AND (ShipMethodFromCustomer = @original_ShipMethodFromCustomer) AND (ContractNumber = @original_ContractNumber) AND (FKCustomerInventory = @original_FKCustomerInventory) AND (FKCustomerInventoryAssemblyDetail = @original_FKCustomerInventoryAssemblyDetail) AND (Comments = @original_Comments) AND (GLCode = @original_GLCode) AND (Serialized = @original_Serialized) AND (Type = @original_Type) AND (QuantityReturnedToStockOrCustomer = @original_QuantityReturnedToStockOrCustomer) AND (CancelDate = @original_CancelDate) AND (CancelReason = @original_CancelReason) AND (CancelledBy = @original_CancelledBy) AND (ReplacementCostDifferential = @original_ReplacementCostDifferential) AND (ReplacementGLCode = @original_ReplacementGLCode) AND (VendorInvoiceNumber = @original_VendorInvoiceNumber) AND (DropShipFlag = @original_DropShipFlag) AND (ShipToName = @original_ShipToName) AND (ShipToAddress1 = @original_ShipToAddress1) AND (ShipToAddress2 = @original_ShipToAddress2) AND (ShipToCity = @original_ShipToCity) AND (ShipToState = @original_ShipToState) AND (ShipToPostalCode = @original_ShipToPostalCode) AND (ShipToCountry = @original_ShipToCountry) AND (PONumber = @original_PONumber)
Thanks.
View 2 Replies
View Related
Oct 31, 2004
hi, i try the below sql code, however when i try to execute the command, it always give me the error 'Cannot use an aggregate or a subquery in an expression used for the group by list of a GROUP BY clause.'
If i remove the "(SELECT [description] = CASE WHEN ([description]) <> '' THEN [description] ELSE [tbl_batch_completed].[status] END)" under the group by clause, it will work
do I need to change something in the sql statement?
Thanks in advance
SELECT TAG_FACE_CON.REQUEST_ID,
(SELECT [description] = CASE WHEN ([description]) <> '' THEN [description] ELSE [tbl_batch_completed].[status] END)AS status
FROM (TAG_FACE_CON RIGHT JOIN tbl_batch_completed ON TAG_FACE_CON.GROUP_ID = tbl_batch_completed.ID)
GROUP BY TAG_FACE_CON.REQUEST_ID,(SELECT [description] = CASE WHEN ([description]) <> '' THEN [description] ELSE [tbl_batch_completed].[status] END)
View 2 Replies
View Related
May 26, 2007
dear sirs i am using sql server 2000 enterprise edition, i am new to sql server and also am learning the sql language...
I have a table named spt_datatype_info
that table has a column called TYPE_NAME
I have given a WHERE statement in a query:
SELECT *
FROM spt_datatype_info
WHERE (TYPE_NAME = smallint)
i know actually the value smallint has to be given in quotes...
Now my question is: When i give the Verify SQL syntax
then it does not return any error, but when i run it...then it given the following error...
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column name 'smallint'.
what does this mean...??
If the SQL statement is wrong then it should return an error when verifying the statement...
regards,
kanishk
View 8 Replies
View Related
Apr 6, 2008
Insert Into Weekly(TesterID)
Select TesterID
FROM ALD where TesterID = 'CMT32' , 'CMT31' , 'CMT02','CMT33','CMT04','CMT36','CMT37','CMT38','CMT03','CMT05','CMT42','CMT34','CMT41','CMT40','CMT29','CMT30','CMT01','CMT39','CMT35'
Im receiving the following error while trying to execute the given query. Advice please.
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near ','.
View 2 Replies
View Related
Nov 21, 2014
I have a case statement that is reading a value from a csv column, and based on where that value falls, calculates a product's a numeric value. It works on one computer, and when copied/pasted to mine, it throws errors.
This is the error: Error: "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '121.67END' at line 1"
Here is the case statement:
CASE
WHEN [CSV_COL(8)] BETWEEN 0 AND .01 THEN ((([CSV_COL(6)] * .029) + .30) + ((([CSV_COL(6)] * .029) + .30) + [CSV_COL(6)]) / (100 - 7) * 100) + 4.36
WHEN [CSV_COL(8)] BETWEEN .011 AND .05 THEN ((([CSV_COL(6)] * .029) + .30) + ((([CSV_COL(6)] * .029) + .30) + [CSV_COL(6)]) / (100 - 7) * 100) + 5.44
WHEN [CSV_COL(8)] BETWEEN .051 AND 1 THEN ((([CSV_COL(6)] * .029) + .30) + ((([CSV_COL(6)] * .029) + .30) + [CSV_COL(6)]) / (100 - 7) * 100) + 11
[code]....
View 2 Replies
View Related
Aug 8, 2007
DECLARE CareModel_cursor cursor FOR SELECT DISTINCT ObAnteEvent.UrNo
FROM ObBabyEpisode INNER JOIN ObAnteEvent ON
ObAnteEvent.UrNo = ObBabyEpisode.UrNo AND ObAnteEvent.EpisodeID = ObBabyEpisode.EpisodeID
WHERE ObAnteEvent.EventType='CareModel' ORDER BY EventDate,EventTime
AND CONVERT(DateTime,ObBabyEpisode.BirthDate,103)>= Convert(DateTime,'1/1/2000',103)
AND CONVERT(DateTime, ObBabyEpisode.BirthDate,103)<= Convert(DateTime,'1/1/2007',103)
Error is at 'AND ObAnteEvent.EpisodeID = ObBabyEpisode.EpisodeID' Why is this a problem and how do I solve this?
View 3 Replies
View Related
Oct 22, 2007
HI
i am getting a error with my sql statement. i am trying to join to two tables together. this is the error it is giving.
Syntax error (missing operator) in query expression '12Package_Listing.Package_id LIKE 11Package.Package_id'.
my sql statement is
string strSQL1 = "select * from 12Package_Listing INNER JOIN 11Package ON 12Package_Listing.Package_id LIKE 11Package.Package_id";
View 7 Replies
View Related
Dec 4, 2007
I want to know, what is the error in the below block,
BEGIN
Declare @StoreId as varchar(20)
Declare @DepartmentId as varchar(20)
Declare @VendorNumber as varchar(20)
Declare @SortBy as int
Declare @AllVendorSelected as int
Declare @SQL as nvarchar(500)
Set @StoreId = '1'
Set @DepartmentId = 'NONE'
Set @VendorNumber = 'NONE'
Set @SortBy = 0
Set @AllVendorSelected = 0
SET @SQL = 'SELECT
Inventory.ItemNum
,Inventory.ItemName
,Inventory.ItemName_Extra
,Inventory.Dept_ID
,Inventory.In_Stock
,Inventory.Cost
,Inventory.Price
,Inventory.NumBoxes
,Inventory.NumPerCase
,Inventory.Store_ID
,Departments.Description
FROM
Inventory
INNER JOIN Departments ON Inventory.Store_ID = Departments.Store_ID AND Inventory.Dept_ID = Departments.Dept_ID
LEFT OUTER JOIN Inventory_Vendors ON Inventory.ItemNum = Inventory_Vendors.ItemNum AND Inventory.Store_ID = Inventory_Vendors.Store_ID
WHERE
Inventory.Store_Id in (@StoreId)
AND Inventory.Dept_ID in (@DepartmentId)
AND (@AllVendorSelected = 1 OR Inventory_Vendors.Vendor_Number in (@VendorNumber))'
IF (@SortBy = 0)
SET @SQL = @SQL + 'ORDER BY Inventory.ItemNum'
ELSE
SET @SQL = @SQL + 'ORDER BY Inventory.ItemName'
EXEC @SQL
END
View 5 Replies
View Related
Jul 3, 2007
hi i have copied this from my other page where it works fine and i cant understand what is going wrong! maybe one of your guys can point out what i cant see! herei s my code
string strOrderID = Request.QueryString["orderID"].ToString();int intOrderID = Convert.ToInt32(strOrderID);
int intCustID = Convert.ToInt32(Request.QueryString["qsnOrderCustID"].ToString());lblCustomerID.Text = Request.QueryString["qsnOrderCustID"].ToString();lblOrderID.Text = Request.QueryString["orderID"].ToString();
SqlConnection myConn = new SqlConnection("Data Source=xxxx;Initial Catalog=xxxx;User ID=xxxx;Password=xxxx");
//This is the sql statement.string sql = "SELECT [del_address], [del_post_code], [del_time] From tbl_del WHERE order_ID = " + intOrderID;
//This creates a sql command which executes the sql statement.SqlCommand sqlCmd = new SqlCommand(sql, myConn);
myConn.Open();SqlDataReader dr = sqlCmd.ExecuteReader();
//This reads the first result from the sqlReader
dr.Read();
try
{
lblDelTime.Text = Convert.ToString(dr["del_time"].ToString);
lblDelAddy.Text = dr["del_address"].ToString();lblDelPCode.Text = dr["del_post_code"].ToString();if (lblDelAddy.Text != "")
{
lblDelDate.Visible = true;lblDelTime.Visible = true;
Label1.Visible = true;Label2.Visible = true;
}
}catch (Exception except)
{lblerror.Text = Convert.ToString(except);
}
Regards
Jez
View 3 Replies
View Related
Jul 13, 2007
Receive Error: when I Run Select Statement Asking to Declare @Country
Not sure how to Declare the variable '@Country'. Any help would be appreciated... Thank You.
Here is the Code:
____________________________________________________________________________________________________________
Private Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
If Not IsPostBack Then
Dim conCommerce As SqlConnection Dim cmdSelect As SqlCommand Dim CategoriesCounter As SqlDataReader Dim StylesSource As SqlDataReader
conCommerce = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
conCommerce.Open()
cmdSelect = New SqlCommand("Select CountrySubCatCount FROM StylesSource WHere Country = @Country", conCommerce)
StylesSource = cmdSelect.ExecuteReader()
txtCounter1.DataSource = StylesSource txtCounter1.DataTextField = "Country"
txtCounter1.DataBind()
StylesSource.Close() conCommerce.Close()
End If
______________________________________________________________________________
Error Message:
Must declare the variable '@Country'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@Country'.
Source Error:
Line 220: cmdSelect = New SqlCommand("Select CountrySubCatCount FROM StylesSource WHere Country = @Country", conCommerce)Line 221:Line 222: StylesSource = cmdSelect.ExecuteReader()Line 223:Line 224:
View 2 Replies
View Related
Apr 22, 2008
SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblLooker,tblSubject,tblStop WHERE NOT (SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblSubject, tblLooker, tblStop WHERE tblSubject.Subject > tblLooker.Looker AND tblSubject.Subject < tblStop.Stop AND tblLooker.id = tblStop.id) Msg 170, Level 15, State 1, Line 5Line 5: Incorrect syntax near ')'. Can anyone tell me why this is not working? Thanks
View 1 Replies
View Related
Mar 30, 2006
Im getting this error when i try to change my value of my int RoleID: UPDATE statement conflicted with COLUMN FOREIGN KEY
constraint 'Roles_Users_FK1'. The conflict occurred in database
'lyngso', table 'Roles', column 'RoleID'.The statement has been terminated.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
UPDATE statement conflicted with COLUMN FOREIGN KEY constraint
'Roles_Users_FK1'. The conflict occurred in database 'lyngso', table
'Roles', column 'RoleID'.The statement has been terminated.
Source Error:
Line 373: tryLine 374: {Line 375: rowsAffected = dbCommand.ExecuteNonQuery();Line 376: }Line 377: finallyThe code that courses this error should be this code from my DatabaseHandler class:... queryString = "SELECT unitID FROM Units WHERE containerID = @containerID AND logDateTime = @logDateTime"; dbCommand = new SqlCommand(queryString, dbConnection); //ContainerID Param IDataParameter dbParam_containerID = new SqlParameter(); dbParam_containerID.ParameterName = "@containerID"; dbParam_containerID.Value = containerID; dbParam_containerID.DbType = System.Data.DbType.String; dbCommand.Parameters.Add(dbParam_containerID); //LogDateTime Param IDataParameter dbParam_logDateTime = new SqlParameter(); dbParam_logDateTime.ParameterName = "@logDateTime"; dbParam_logDateTime.Value = logDateTime; dbParam_logDateTime.DbType = System.Data.DbType.DateTime; dbCommand.Parameters.Add(dbParam_logDateTime);...The logDateTime param comes as a param to the method this code i located in. In my database the two tables are created as the following:CREATE TABLE [dbo].[Roles] ( [RoleID] [int] IDENTITY (1, 1) NOT NULL , [Name] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [RoleLevel] [int] NOT NULL ) CREATE TABLE [dbo].[Users] ( [UserID] [int] IDENTITY (1, 1) NOT NULL , [Firstname] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [Lastname] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [varchar] (250) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [Phone] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [MobilPhone] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [IsActive] [bit] NOT NULL , [RoleID] [int] NOT NULL ) To me it all looks fine, but my application doesn't agree with me....can anybody help here?
View 3 Replies
View Related
Jan 12, 2000
Hi!
I want to select just 1 day older rows from table.
I run next statement:
select*from report
where Date = ltrim (DATEPART (dd,GETDATE())>1)+'/'+
ltrim (DATEPART(mm,GETDATE()))+'/'+ltrim (DATEPART(yyyy, GETDATE()))
the datetime in the column Date is: dd/mm/yyyy
and here is error message:
Server: Msg 170, Level 15, State 1, Line 2
Line 2: Incorrect syntax near '>'.
I tried everything , but can't get rid of this error message.
Please help!
View 1 Replies
View Related
