Hello
Is there a way to use Goto or something like it in QA? I have a script with
a few GO statements, as I'm sure you know, declared variables, labels, and
goto's only have scope within each GO block. If i have an error in the
second or third, of 5 GO blocks, I want to trap the error number and goto
only ONE error handler label.
Anyone know of a way?
Thansk.
Matthew Wells
Join Bytes!
I am trying to run sp_fulltext_database enable and I receive the following error:
"The Microsoft Search service cannot be administered under the present user account"
Not sure where to go.
I am trying to run DTS package from query analyzer and getting following error .
Command from query analyzer is
go
master..xp_cmdshell 'dtsrun /Sirhahadb01 /Usa /P<sa password> /Ntestpack'
Output error message is
output
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147217887 (80040E21)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Error Detail Records:
Error: -2147217887 (80040E21); Provider Error: 0 (0)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
Sujit
Hi,
I have the TAMCreate.sql file which contains the script to create all tables in the Database TAMaintenance. Its created and used in the SqlServer 2000. But i have only SqlServer 7. From the script i copy and paste each table and created upto 7 tables without any problem, when i create the 8th table i get the following error the code for the table
CREATE TABLE AA_Branch_Master(
Branch_Code varchar(15) CONSTRAINT PK_AA_Branch_Master1 PRIMARY KEY,
Branch_Name varchar(50) NOT NULL,
Branch_Opened datetime NOT NULL,
Branch_Location varchar(50) NOT NULL,
Branch_Province varchar(25) NOT NULL,
Branch_Incharge varchar(50) NOT NULL,
Branch_Remark varchar(150),
Branch_Status BIT(1))
go
Error:
Server: Msg 2716, Level 16, State 1, Line 1
Column or parameter #8: Cannot specify a column width on data type bit.
In the same way i have get the error or another table, rest of the tables are created successfully.
the code for the table
CREATE TABLE AA_Supplier_Master(
Supp_Code varchar(15) CONSTRAINT PK_AA_Supplier_Master1 PRIMARY KEY,
Supp_Name varchar(100) NOT NULL,
Supp_Address varchar(150) NOT NULL,
Supp_Contact_Person varchar(50) NOT NULL,
Supp_Paymode varchar(25) NOT NULL,
Supp_Tel1 varchar(25),
Supp_Tel2 varchar(25),
Supp_Fax varchar(25),
Supp_Postbox varchar(15),
Supp_Postal_Code varchar(15),
Supp_City varchar(50) NOT NULL,
Supp_Country varchar(50) NOT NULL,
Supp_Status BIT(1))
go
Error:
Server: Msg 2716, Level 16, State 1, Line 1
Column or parameter #13: Cannot specify a column width on data type bit.
Thankyou,
Chock.
Chock
We have several databases but one is behaving differently in SQL Query Analyzer. Please assume we have selected the correct db in the the pull-down and assume database name is DB1 and table name is Table1
SELECT *
FROM db1.[table1]
works fine.
SELECT *
FROM [table1]
returns "Invalid Object Name Error".
This problem causes some complex queries not to work so I'd like to know if this db has some special setting that requires explicit db name in each query.
We have also tried..
use [db1]
SELECT *
FROM [table1]
It still gives the same error.
Any help would be appreciated.
Thansk
Notalian
MS SQL Server 2000 SP3Windows XP SP2Error when try to debug in Query Analyzer:Server: Msg 504, Level 16, State 1, Procedure sp_sdidebug, Line 1[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect todebugger on HORNET (Error = 0x80070005). Ensure that client-sidecomponents, such as SQLDBREG.EXE, are installed and registered onEUGENE. Debugging disabled for connection 63.Tried:- 'Troubleshooting the Transact-SQL Debugger' ( Book on-line )- EXEC ... 'legacy_on'- firewall is disabledWhat else can be done ?Thanks , Eugene
View 1 Replies View Related
Hi,
Please provide some help regarding the "Interface Defining Error: IID_IDBDataSourceAdmin" error while trying to create a SDF database using Query Analyzer on a Windows CE 5.0 mobile device (Symbol MC3000).
Error: 0x80004005 E_FAIL
Native Error: 28558
Description: SQL Mobile encountered problems when creating database [,,,,]
Param. 0: 0
Param. 1: 0
Param. 2: 0
Param. 3:
Param. 4:
Param. 5:
A list of (related) installed packages:
NETCFv2.wce5.armv4i.cab
sqlce30.dev.ENU.wce5.armv4i.CAB
sqlce30.repl.wce5.armv4i.CAB
sqlce30.wce5.armv4i.CAB
PS.
Basically I have developed a mobile application that programmatically creates the database, the code worked on a similar device (Win CE 50), trying to run the application on a new device resulted in database creation errors. I tried creating a test database manually .. and this is what I got.
Browsing MSDN or searching on the Forum did not help.
~Zarko Gajic
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View RelatedI am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq
View 4 Replies View RelatedHi there
Running query analyzer against two different server.
the first only need 1-2 secs to return the query result,
the other return 7-8 secs for the query result.
plz advice what could cause this slow performance?
thx
Is Query Analyzer being droped in MS-SQL 2005? I'm using Microsoft SQL
Server Managemant Studio and I couldn't find the Store Procedure node
and Query Analyzer anymore. Help is appreciated.
Say you have a state column with the name of a state in it. And you need to add a branchId to the table. I know I should not have it in there, and the application should use proper lookup tables, but that's not the case.
Can SQL Server query analyzer loop through and update the branchid field based on a lookup in a lookup table?
How would that be done?
Hi All,
I think I post this in a wrong section but I cant find forum for sql server and i just have a quick question
basically, I installed sql server 2005 and I need to debug a store procedure.1. Does query analyzer come with sql server 2005?2. If not how can I debug store procedure in sql server 2005?Thanks in advance
Does anyone know if there is a limitation in Query Analyzer in terms of the number of characters in a query that it will parse?
I am having a problem with some large queries, and I am not sure if it is Query Analyzer, or the SQL Server query parsing engine that is causing the problem.
The query just involves a simple SELECT statement, albeit for a large number of columns.
Hi,
I'm using SQL Server 7.0. I connect to one database in Query Analyzer and I can use the "Perform Index Analysis" option under the "Query" menu option. when I connect to one of our other databases, the "Perform Index Analysis" option under the "Query" menu option is disabled (greyed out). Does anyone know what the problem could be and how might I be able to enable this option.
Thanks in advance,
Darrin
Hello
In query Analyzer of SQL2000 when i select
2 Select Queries and Run it shows in same Window as 2 Grids
I have seen people using seperate grid option to view each query results in a Tab query results Pane in MSSQL 7.
Eg Select * from table1 (in one grid)
select * from table2 (in another grid)
like a TAB so that i can move from one tab to another.
Is it possible to do that in query Analyzer?
Regards
I would like to use the Query Analyzer to create a script that will prompt the user(dialog box) for a response in SQL Server 7.0. I found a post someone mentioned DBMS can return messages and using Query Analyzer.
Thanks for your help in advance.
I'm trying to do a couple of things with some different tables.
With the first table, I have first name and last name in two separate columns.
I'm trying to create a new ID column that would do the following.
Take the first 3 letters of the last name (and remove any non characters such as ',&) and the first 3 letters of the first name, and then combine them.
I know how to use substring to take the first three, and I know how to combine them, but I'm having problems removing the non alpha characters.
For example, if the columns looked as follows:
First Last
John O'Connor
I'd want the result to look like OCOJOH, however, I'm getting O'CJOH.
The second issue is how would I do something similar if the First and Last Name were in the same column and string.
For example, if the column looks as follows:
Name
John O'Connor Publishing
I'd like to pull the first 3 from the first string before the space and then the next 3 so it would be as follows:
JOHOCO
Finally, I want to compare these new IDs, and add numbers to them.
So if I had the following
First Last
John O'Connor
Johnny O'Connell
The first would be OCOJOH01
The second would be OCOJOH02
If there are not any duplicates with the new ID, I'd like to call it OCOJOH01 and then move on.
Any help/ideas would be greatly appreciated.
Thanks
Hi;
I would like to change the format of dates that is in colum using query analyzer. The name of the colum is StartD and this how they look: 3292006 I would like to insert the / / . Can someone show me how to accomplish it.
Thank you
I have a database with couple of store procedure and views.
Is there any way that i can find out all sp or views which contains word like *svc*. I am talking about the containt of the sp and views not name.
We are replacing one module so i have to change the all sp and views which use table or view start with svc.
Need help.
Thanks
in the market place that will run a query on multiple DBs acrossmultiple servers? Without having to manually connect to each server?If so, can anyone provide a link for it.Thanks
View 3 Replies View RelatedI am new to SQL and need help running a performance check on our companies dtabase. I use SQL Enterprise Manager 2000. Could someone please help me accomplish this?
Thanks,
Carl
hi everybody!
this is my first post, so I'd like to say hallo to everyone!
I "work" on SQL Server 2000, and I would like to ask you a question.
Is it correct that i cannot set a database user as database owner (using command sp_changedbowner 'user_name')?
QA returns this error message:
"Server: Msg 15110, Level 16, State 1, Procedure sp_changedbowner, Line 46
The proposed new database owner is already a user in the database."
so I have to use sp_revokedbaccess and then I can change the db owner.
why can't a db user be the db owner?
thanks for the answers!!
Hi,
Was wondering if anyone can tell me how to get the Query Analyzer Tool installed to WM6 Professional Emulator inside of VS05?
Thanks,
John.
Hello,
how is the query analyzer opening a database??? Does someone knows the command it uses to open the connection ??
I ask this because i have corrupted datafiles stored on a flash card which i can not open with connection.open but the analyzer opens them normally. After that i can open the datafiles using normal code
Does it use any special params?? I get the corrupted files on power down and after that i can not open them from my application. I can only do this after i open them once with the query analyzer
The database is about 20 MB stored on a flash card
Thanks in advance
Say I have this query in my stored procedure. The problem I am facing is @OrgUID contains no value, so I put these 2 lines to debug. Am I using the right way to debug? I couldn't see the value of @OrgUID using this way. OrgUID is the PK in Organization. INSERT INTO Organization (OrgName) VALUES (@DealerName)SELECT @OrgUID = @@IDENTITYprint @OrgUIDreturn
View 4 Replies View RelatedThis has got to be a simple one, but I could not find out how
I have this simple proc for test purposes only...
ALTER PROCEDURE dbo.RotoTest( @strSSN VARCHAR(11), @blnUseACHDate BIT = 0, @intInvestorId int = 0)ASreturn 5
Thats right it does nothing but return 5 and thats because I removed all the real code to simplify my question.
When I hit this proc in SQL Query Analyzer..
exec RotoTest '123-45-6789', 0, 1 No return value is displayed in Query Analyzer.
When I try something like this
exec RotoTest '123-45-6789', 0, 1, intRetValue Output (in this situation I get wrong number of arguments)
How can I get a return value displayed on my screen in SQL QUERY ANALYZER with out modifying the proc? I do not want to modify the proc in anyway (because I can't), I just want to display the return value
Hi I have a following SP that does not return results. Could somebody tell me what I am doing wrong here.
CREATE procedure dbo.wfiDocuments_Get
(
@ModuleIdint,
@PortalIdint,
@IsActivebit=NULL
)
AS
declare @SQL nvarchar(4000)
SET @SQL =
'select
DocumentId,
ModuleId,
PortalId,
CreatedByUserId,
''CreatedByUserName'' = Users.FirstName +'' '' + Users.LastName,
CreatedDate,
Title,
Category,
Syndicate,
Clicks,
Size,
Description,
FileName,
VPath,
IsActive
from wfiDocuments
left outer join Users on wfiDocuments.CreatedByUserId = Users.UserId
where PortalId=@Portal and ModuleId =@Module'
IF @IsActive IS NOT NULL
SET @SQL = @SQL + ' AND IsActive=@Active'
SET @SQL = @SQL + ' ORDER BY Title'
EXEC sp_executesql @SQL,
N'@Portal INT,@Module INT,@Active bit',
@PortalId,@ModuleId,@IsActive
GO
Hi there !
I have a table called customer which got
id = int
name = varchar
address = varchar
email= varchar
can you please write the syntax that insert the below data in the table using query Analyzer
id = 1
name = fadil
Address = London
email = fadil1977@hotmail.com
Thank you for your time and help.