Error Handling In MSSQL - If Error During Call Remote Stored Prcedure I Need SQL Code To Continue...
Jul 20, 2005
Hi All,
I want to catch the next MSSQL error in my SQL code with following continue
calculations
Server: Msg 17, Level 16, State 1, Line 1
SQL Server does not exist or access denied.
If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQL
will not continue with (b) - I need the code in (b) to run despite whether
the previous exec was successful or not - Any ideas?
If an update in a stored procedure fails/errors (as in (a) below) the procedure will not continue with (b) - I need the code in (b) to run despite whether the previous update was successful or not - Any ideas?
(a) if(@Data2 = 6) begin update SCHEDULE set Start_CallBack = getdate() where (Block = @Block) end
(b) WHILE @Block_Count > 0 BEGIN UPDATE BLOCK SET Status = @Block_Status END
does anybody know this error code? I get that error from a jdbc-connection ocasionally but can't find an explanation. The original message is in German. The number should be ok. The error occures when a transaction is aborted, the jdbc-connection is lost.
'Der Server konnte die Transaktion nicht fortsetzen. Beschreibung: 60000000b8'
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Hi! Have a problem to execute xp_cmdshell with a proxy user in MSSQL2005 (9.00.2047.00). The error is:
Msg 15121, Level 16, State 10, Procedure xp_cmdshell, Line 1 An error occurred during the execution of xp_cmdshell. A call to 'CreateProcessAsUser' failed with error code: '1314'.
The proxy user is a local administrator on the sql server machine. The proxy user have €śReplace a process level token€? rights thru the group SQLServer2005MSSQLUSer (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=627221&SiteId=1).
I have even tried to use a domain administrator as proxy user, but the same error occur.
What is wrong? I have search the internet a lot and found that many people have this problem without any answer.
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
I get this error when trying to run xp_cmdshell. I have turned on xp_cmdshell via sp_configure and verified it is on (set to 1) by running sp_configure again. The login trying to run xp_cmdshell has sysadmin privileges. If anyone has a solution please let me know.
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009. Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
I have an application where I am bcping a file into a holder table and then looping through each of the rows in that table to add it into the main table for the app. If the data is improperly formatted (ie someone accidently enters 39.Y6 instead of 39.66), we still want to keep it in the system, so we can update the bad fields manually and then import it into the system and keep going through the loop so that if there are 50 rows to import and only one of them is bad, the other 49 will still get imported fine.
I am putting each field from the holder table into a variable and passing them into an existing stored procedure that updates the main table. I had originally checked each one of those variables that had to be numeric or a date to make sure that it was correct before passing them into the procedure but there are about 30 fields so this made the application run unacceptably slow. I then just checked the @@Error value after passing them into the stored procedure (tried after the sp and after the INSERT statement inside the sp) to get that this row didn't insert correctly and move onto the next one. The problem is that the "Error converting data type varchar to numeric" doesn't seem to be handled by the error handling and just bombs the whole thing, so none of the subsequent rows or processing is done.
Is there any way to handle this error and continue the processing without the whole stored procedure crashing? The data entry is being outsourced to India (grrr...), so I don't have any control over checking the data when they enter it and have to do it from within my application on the database side.
Hi, I'm doing some fairly basic updates with stored procedures. 99% of them affect one row. I've jsut discovered that I can't get the value of @@rowcount and @@error to return as output parameters (if I check one, the other one gets reset!). My theory is then to return the rowcount and if it's not = 1, then I know I've had a problem. If I begin a transaction in vb.net and call each proc in the required order and check each step that rowcount = 1, is this a reliable method of ensuring no errors have occurred?Thanks.
I have a stored proc that loops through records using a cursor. If during the loop an error occurs i need to trap the error and write it to a log file. Error handling needs to be placed in the update and insert sections and the error that occurs needs to get recorded along current row from the cursor.
Here is the code: declare @tier_id int, @tier_desctext varchar(50), @tier_shortdesc varchar(50), @long_name varchar(50), @short_name varchar(50), @rec_count int
--Cursor for UES data DECLARE cr_ues_tier INSENSITIVE CURSOR FOR SELECT DISTINCT tier_id, tier_desctext, tier_shortdesc FROM "dbsourcedayoldprod".ues.dbo.Tiers
OPEN cr_ues_tier
--Select cursor values into local variables FETCH NEXT FROM cr_ues_tier INTO @tier_id, @tier_desctext, @tier_shortdesc WHILE (@@FETCH_STATUS <> -1) BEGIN
--Set Data Mart variables SELECT @long_name = long_name, @short_name = short_name FROM uesrpt..coverage_level WHERE ues_tier_id = @tier_id
--Set the record counter SET @rec_count = (select ues_tier_id from uesrpt..coverage_level where ues_tier_id = @tier_id)
--Are there exsisting records if so go to the update section IF @rec_count <> 0
--Update Data Mart values if they have changed BEGIN IF @long_name <> @tier_desctext OR (@long_name IS NULL AND @tier_desctext IS NOT NULL) OR (@long_name IS NOT NULL AND @tier_desctext IS NULL)
OR @short_name <> @tier_shortdesc OR (@short_name IS NULL AND @tier_shortdesc IS NOT NULL) OR (@short_name IS NOT NULL AND @tier_shortdesc IS NULL)
UPDATE uesrpt..coverage_level SET long_name = @tier_desctext, short_name = @tier_shortdesc WHERE ues_tier_id = @tier_id END
--Rows don't exsist in the Data Mart - Insert new rows ELSE INSERT INTO uesrpt..coverage_level (ues_tier_id, long_name, short_name) SELECT @tier_id, @tier_desctext, @tier_shortdesc
--Get next row from UES cursor FETCH NEXT FROM cr_ues_tier INTO @tier_id, @tier_desctext, @tier_shortdesc END
I have a huge stored procedure. part of the query is, the cursor is open and it consist of the implementation for subquery, I want to do an implementation if this subquery return more than one value, catch the error, but continue the cursor operation.
my SQL procedure part looks like:
---code to open the cursor here WHILE @@FETCH_STATUS=0 BEGIN SELECT @attachmentCount=count(metaDataID) FROM View_1 WHERE parentMetaDataID='' + ( SELECT metaDataID FROM View_1 WHERE metaDataStorageID = @metaStorageID AND parentMetaDataID='0') + '' AND metaDataContentTypeID=@metaDataContentTypeID
--error handling DECLARE @err int SELECT @err = @@error IF @err <> 0 BEGIN FETCH NEXT FROM CursorDataStorageID INTO @metaStorageID CONTINUE END
FETCH NEXT FROM CursorDataStorageID INTO @metaStorageID END
-----------------
when I execute this query in SQL management studio, it does return me the no of rows with the msg:
Msg 512, Level 16, State 1, Procedure sp_AdvanceSearchHugeExecution, Line 522
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But when the stored procedure is called from the within the code ASP.Net, to fill the dataset, I get an exception.
my C# code is simple to fill the dataset using data adapter in try catch block.
Can anyone please suggest how will I able to fill dataset successfully overcoming this mesg?
OK, i'm trying to do some error checking on stored procedures and amfollowing the advise in Erland Sommarskog's 'Implementing ErrorHandling with Stored Procedures' document.Can anybody help with my stored procedures and why it keeps erroring atthe '-- Create new Address Detail stage'? The errorCode value that isbeing return in my web app is 0, so i'm not even sure why it's evenraising the error!!Rather than executing the INSERT INTO AddressDetail in myCreateSupplier procedure and checking for errors, i'd like to be ableexecute a CreateAddressDetail SP, so that i can reuse it throughout myweb app.New suppliers must have a contact address associated with it, so ifthere's an error creating the suppliers address, i need myCreateSupplier stored procedure to ROLLBACK and not create the newsupplier. That's why i'm not doing two separate calls to the proceduresfrom my app code.Any suggestions are most appreciated.Many thanksDan Williams.CREATE PROCEDURE CreateSupplier@supplierName varchar(50),@userId bigint,@address varchar(50),@town varchar(50),@county varchar(50),@postCode varchar(15),@contactName varchar(50)ASBEGINDECLARE @newSupplierId as bigintDECLARE @newAddressDetailId as bigintDECLARE @errorCode as bigintSET NOCOUNT ONBEGIN TRANINSERT INTO Supplier(supplierName, accOpenedBy, accOpenedDate)VALUES (@supplierName, @userId, getDate())SET @newSupplierId = SCOPE_IDENTITY()-- Check for an error creating new supplierSELECT @errorCode = @@ERRORIF (@errorCode <> 0) BEGIN ROLLBACK TRAN RAISERROR ('Error creatingsupplier',16,1) RETURN @errorCode END-- Create new Address DetailEXEC @errorCode = CreateAddressDetail @address, @town, @county,@postCode, @contactName, @newAddressDetailId OUTPUTSELECT @errorCode = coalesce(nullif(@errorCode, 0), @@error)if @errorCode <> 0 BEGIN ROLLBACK TRAN RAISERROR ('Error creatingaddress. ErrorCode = %d',16, @errorCode) RETURN @errorCode ENDCOMMIT TRANSET NOCOUNT OFFRETURN @newSupplierIdENDGOCREATE PROCEDURE CreateAddressDetail@address varchar(50),@town varchar(50),@county varchar(50),@postCode varchar(15),@contactName varchar(50),@newAddressDetailId bigint OUTPUTASBEGIN-- Create new AddressDetailDECLARE @errorCode as bigintSET NOCOUNT ONBEGIN TRANINSERT INTO AddressDetail(address, town, county, postCode, contactName)VALUES (@address, @town, @county, @postCode, @contactName)SET @newAddressDetailId = SCOPE_IDENTITY()-- Check for an error creating new addressSELECT @errorCode = @@ERRORIF (@errorCode <> 0)BEGINRAISERROR ('Error creating new address detail',16,1)ROLLBACK TRANENDELSECOMMIT TRANSET NOCOUNT OFFRETURN @newAddressDetailIdENDGO
Hi all,I have a sproc that uses OpenRowset to an Oracle db. If OpenRowseterrors, it terminates the procedure. I need it to continueprocessing. Is there any workaround for this?ThanksPachydermitis
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I am a little confused about something and I am hoping that someone out there has some insight.
Within a stored procedure, I have error handling code just after an INSERT statement. the error handling code basically checks @@ERROR, and if non-zero, logs a message to the NT Event Log. One of the things I want to be able to handle is if the transaction log on the database is full, and the INSERT fails for this reason. However, it appears that for this particular situation (and others I've seen in the past), the stored procedure aborts at the INSERT statement. Never makes it to the error handling code. Is there any way to control this behaviour?
I really need to put in place a failure scenario, if the insert fails, but i can't do that if the stored proc. just aborts on certain types of insert failures.
I have a Stored Proc that is called by a SQL Job in SQL Server 2000. This stored proc deadlocks once every couple of days. I'm looking into using the @@error and try to doing a waitfor .5 sec and try the transaction again. While looking around google I've come across a few articles stating that a deadlock inside a Stored Proc will stop all execution of the stored proc so I will not be able doing any error handling. Is this true? Does anyone have any experience that could help me out?
I know the best solution would be to resolve why I get a deadlock. We are currently looking into that but until we can resolve those issues I would like to get some type of error handling in place if possible.
I am stumped on the error reporting with sql server. I was told ineed to return @SQLCode(code showing if successful or not) and@ErrMsg(and the message returned). I am clueless on this.I wrote this procedure: Code: ( text )
Hi,I a stored procedure that inserts a record into a table asbelow.The insert works OK, but if the insert violates a uniqueindewx constraint on one of the columns, the proc terminatesimmediately, and does NOT execute the 'if @@ERROR <> 0'statement.Am I doing something wrong, or do I need to set an attributesomewhere?tia,Billbegin traninsert into Users(UserName, UserPWD, Lname, Fname, UserDesc)values (@userName, @userPWD, @lname, @fname, @userDesc)if @@ERROR <> 0beginrollback transet @returnCode = -2set @errMsg = 'SQL error '+ convert(varchar(6), @@ERROR)+ ' occurred adding user '+ @userNameend
I get hte following Error --------------------------------
"Dupaco Load MMAs"-------------"An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.". "
"Data Flow Task" -------"The AcquireConnection method call to the connection manager "Dupaco" failed with error code 0xC0202009. "
"Data Flow Task" ----------"component "OLE DB Destination" (119) failed validation and returned error code 0xC020801C. "
"One or more component failed validation. "
"There were errors during task validation. "
When i try to execute the same code on the server where all the package are hosted. It is working fine.
More Info:
In thepackage we are using one "Source Flat file connection" and one "Oledb Destination connection"
Please help me to solve this problem, as my client needs it very badly
Can anyone let me know the prefered method for handling stored procedure errors. I usually trap the error in the stored proc and then return a value using an output parameter e.g stored proc if @@error <> 0 beginset @returnValue = -1returnend c#com.Parameters.Add("@returnValue", SqlDbType.Int).Direction = ParameterDirection.Output;con.Open();com.ExecuteNonQuery(); int result = (int)com.Parameters[0].Value; if (result == -1){//throw exception}else{//do whatever}
I would like to capture any errors thrown by linked server in my stored procedure, How do I do this? eg: Select statement in sp to remote server fails if login credentials were changed for some reason on remote server. @@error is not able to capture this error and stored procedure is terminated when this type of error occurs.
I'm using the sp_OAMethod method to call a method called "getDesc" from within a VB .dll I created. Within the .dll file, the method is called "getDesc()", but for some reason I'm getting an error saying it is an unknown name. I am able to create the object without errors, so I know the .dll is correctly registered and is being found by the server. Any idea what would cause this error when I know the method name is correct? The code I use is below (without error handling to make it shorter):
Hi All, I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job: The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error: [Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
