I guess this is an easy one, but I haven't found a (nice) way to handle "error"-rows.
In my application I load a lot of data, in earlier version I used the Transformation task, which did deliver log and error-files. How do I make the same in SSIS? In the best of worlds I would like to log when a package/task i starting, ending and how many rows are OK and how many rows are errors. For the errors I want a Description what is wrong (FK, PK, NULL value ....) and the complete row in a file so it will be easy to reolad it.
I've tried the logging-feature but when I redirects the error-rows to a text-file, it also eliminates the error text in my log file. So it seems that I have to choose to have the description or the row-records?!
All, I am new to SSIS package. I need to know how to handle the errors in SSIS work flow. Can you please provide any specific procedure or method to handle the error. Basically, i wanted to trap the failed records and alert through email... I would be pleased if any one could answer for this..
I have a package which stores the data from Excel to SQL database. Excel file contains 2 records in which one is good record and other one is bad record. I would like to transfer the bad record to sql 2005 error table.
How should i accomplish this and what are the steps to be followed for successful package implementation.
I have an SSIS package in which i use the OLEDB command to InsertUpdate the table (i.e., the command calls an Stored Procedure which has the logic to insertupdate in the table). In the SP we are having Try.. Catch blocks which logs the error into the table, Now my problem is if i give ignore failure then the error is not logged anywhere, if i give fail component obviously the package fails, which i dont want, however when i give Redirect Row then the errors are logeed in the error table via the SP but the problem is it is showing a warning because i have given no destination to the error output. Am i doing anything wrong wat should be the actual mechanism if i want to get the error logged into the table from the SP and not thro. the SSIS package. Thanks in advance.
I'm currently rewriting a package that was developed in SQL 2000 DTS to SSIS SQL 2005. When I right click on my DTS package and I go to the Logging tab at the bottom there is an "Error Handling" section. I have the path to the text file where I want the errors saved off. I also have a check in "Fail Package on First Error". My question is how can I do this in SSIS? I can't find any way to do this.
I am developing a package which takes data from SQL Server 2005 and hits the JDE files.
In this package I need to send error mail when anyrow returns failure on OLE DB Command component which calls JDE Stored Procedure. So I created a script component which takes error output (red arrow) from OLE DB Command component. But whenever error is triggered, this is not redirecting the rows to script component even though I configured Error output as "Redirect Row". Can anyone please tell me how to redirect error to a script component?
I am new to using SSIS. I need to know how can I retrieve the records in a Lookup component that cause an error to use them in a Data Transfer task. I created the error event handler but I don't know how to retrieve the records causing the error to use them in the Data Transfer task.
Hi guys, i'm running my SSIS package via a web application,
Microsoft.SqlServer.Dts.Runtime.Application app = new Microsoft.SqlServer.Dts.Runtime.Application();
Package pkg = app.LoadFromSqlServer("\send mail test", "localhost", null, null, null);
Variables vars = pkg.Variables;
vars["username"].Value = "C# user Name ";
vars["message"].Value = "C# body text";
DTSExecResult result = pkg.Execute();
//MessageBox.Show(result.ToString(), "result from dts"); --app mode
now sometimes the "result" variable return Failure, but i don't know what's wrong, when i run the package in debug mode (in VS) it works fine. DTSExecResult only returns "Success" or "Failure", is there a way to find out more information about the result. like why did the package fail?
the ssis package is built with event handlers but they don't get triggered. it's just when i execute from the web it just returns failed. i checked all the SQL connections as well, they are all fine, as they use SQL authentication, and connection strings are hardcoded as expressions.
I want to caputure all error records with rowid and error code and Error description in SSIS 2012.We want to do this in Dataflow level... I am using error out option(Redirect Row). But it is not giving detailed information of the error records.
When my ForEach Loop runs, when a file does not exist on the server, I am getting a File does not exist error.I would prefer to write a mesaage to my log and then move on to the next step successfully.When I got to Event Handlers and select OnTaskFailed, what do I want to do from here?
When I have an alternet Data Flow in an event handler, caused by a record failing to be inserted due to a unique-key constraint violation, does this increment the number of errors, counting towards the MaximumErrorCount? How can I NOT count it as an error?
The thing is, I need to insert 300,000+ records each day, and some may be duplicates from data already in the table. So I set a unique key constraint on the table, and if during the load, it fails, it will trigger an alernate data flow to load the error records into another table. But if someone tries to load a file that already has been loaded, for example, all the records would be duplicates, which would be equivelant to 300,000+ errors, and I don't want to keep setting the MaximumErrorCount property higher and higher.
Is there any way to treat the error as "being handled" in the dataflow, so therefore doesn't treat it as an error? Or conversely, can I set the MaximumErrorCount property to 0 or -1 to accept all errors, no matter how many?
Please suggest me the approach for handling the below custom validation in SSIS
Source: A Table in the database Destination: One or More Tables in the database Transformation:For each record in the source table, I have to do custom validation and redirect to one of the destination tables
Custom validation for each record include
1. Checking a set of fields are not matching with main record data in database - If so move to a duplicatelist table 2. Checking for set of fields have got any new values - If so make an entry in a newvaluesfound table 3. If no new/duplicate found move to success table
Approach 1
An OLEdb Source Task to point the source table An OLEdb Transformation to call an SP for each record in the source Concerns
The Transformation is implemented in SP(Custom validation & loading to destination)
Approach 2
An Script task from the control flow items - To call an SP in the database Concerns
The Source, Transformation, Destination - everything managed in the SP
Suggestions needed
Is there any better approach of handling this type of requirement in SSIS If I write all the code in SP, I may need to use cursors for looping through each record..
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
I have two columns in Informix data base One has Data Type of date and another column of data type string. Time is stored in string format. I have to Validate wether both are correct, not null, greater than 1753 and concate to get one datetime field to transfer to SQL Server. Right now I am doing it in script component, as I need to log error if any thing is wrong Is there any better way to do it,(derived column or any other component) so that I can log the error also.
I have one ssis package moving the data from staging to destination. In stating table we have the duplicate data. But in destination table 4 columns have primary key. How to handle the duplicate records in oldedb source.
OLEDB SOURCE --> LOOK UP TRANSFORMATION | lookup output / error output(for new Inserts) (updated records) / / DERIVED COLUMN DERIVED COLUMN TRANSFORMATION1 TRANSFORMATION1 | | v v OLEDB COMMAND TRANSFORMATION OLEDB DESTINATION (inserting new records to (Updating records in destinationTable) destination)
in this senario new records r insrted properly but though package runs without error records not get updated in Destination. In OLEDB COMMAND my query is like below,
In advanced editor of OLE DB I hv created additional 16 paramater columns though i assign datatype as numeric to tht columns when i press refresh automatically it changes to DT_STR. My destination table columns r numeric .
I though due to this datatype mismatch the error came So i change the datatype of dest to varchar to make compatible with OLEDB Comand Transformation. THN also no Use NO UPDATES
package is running without error but records not get updated.
if change the flow like below
OLEDB SOURCE --> LOOK UP TRANSFORMATION | lookup output / error output(for new Inserts) (updated records) / / DERIVED COLUMN DERIVED COLUMN TRANSFORMATION1 TRANSFORMATION1 | | v v OLEDB COMMANDTRANSFORMATION / (Updating records in / destinationTable) / / / UNION ALL TRANSFORMATION | v
OLEDB DESTINATION
In This Case The updated record get inserted in the target as wel as the old remains as it is means m getting one additional record.
kindly help me to figure out the bug M frusted with this issue please.............
I've just started looking at SSIS and have encountered what should hopefully be a simple problem to solve. I have a pipe-separated source file that looks like this (I've added Line numbers for simplicity):
In addition to a header and footer records, this file contains three record types for each person.
Record types are identified by the second column.
Each record type has a different number of columns:
Type 100 has 5 columns Type 200 has 4 columns Type 305 has 12 columns
The Row delimiter for all records is the {CR}{LF} character
I've set up a flat file input source and specified {CR}{LF} as the row delimiter for both header and data rows and the "|" character as the field delimiter.
It appears that SSIS is assuming that because the first data row has 5 columns, then everything must fit that format too. So the {CR}{LF} character that separates lines 02 and 03 is interpreted as text rather than a separation character and all remaining | field separators after 305 are interpreted as text containing in the fifth column. SSIS is also complaining that the last row is incomplete.
A bit like this (I've used tildes to indicate column separation):
I've seen one other reference to this behaviour but the response seemed to be SSIS doesn't know which columns are missing. In this scenario, we don't have missing columns, rather, we have different types of record in a single file. in DTS I would effectively parse the file once for each record type thus:
Hi All, I have a requirement here to import data from XML file to SQL Database. The XML schema contains of various elements and one of the element is recursive ie. Parameter node contains parameter node within it and it can have n number of iterations. I have given the sample schema below:
But all the nodes contain the data which has to be imported to a single table dbo.Parameters. I cannot use Union ALL since i dont know how many iterations I will have in the file. Is there any way to do this operation in Data Flow Task using XML Source? Can anyone help me on this?
I would like to supress an Informational error that SQL is returning when I run a stored proc that I created. The error message returned is:
Warning: Null value eliminated from aggregate.
The values returned from the stored proc are the results from a 'select * from #tmp_tbl". Before returning the values, I simply create the temp table, populate it and then run the select statement. Prior to getting my results, I get the error message. Can I suppress it and how?
Hi there, Can anyone help me in catching @@error value. I have a stored procedure which return @@error value, I need to read that in my dataaccesslayer and act according to it. how do I catch the return value from stored procedure in my dataaccesslayer. if I am not wrong @@error return a bool value
dear friends i am writng a store procedure to insert into a two table .table 1 data inserted but when i inserting into a table2 it have some error at that time table 1 data also want to delete.give suggestions
I am writing a stored procedure that loads transaction logs to a database and I am having trouble trapping meaningful error messages. When ever the load fails, it gives me two error messages, the first one is meaningful and the second one just states that the load ended abnormally. Unforunately, when I capture the error using @@error after the load statement, it is the second error message that I am getting.
Is there anyway to trap the first error message as well?
I currently have defined a source server, a transformation, and a destination server using DTS. How and where do I create an error routine that would capture any and all errors that would occur. This would include connection error, transformation errors etc. I know the errors can be written out to a text file but I would like them written to a table on my destination server.
The DTS package will be called from an external program using the xp_cmdshell extended stored procedure. We are using it this way as a flag so if one transformation fails it will return a 1. If all are successful it will return a O. These will be our flags to check the errors table in the destination server.
Could someone tell me where this code is to go and what the code will look like. Samples would be the most help.
is there any way to do sometype of Error handling with in a Stored Proc? Example, If I have a deadlock, can I trap that error and execute other sql code or will always simply kill the stored proc?
I have a composite unique key on the audit_hub table that includes TimeStamp, UID, Type, Mailbox all as part of the unique key.
I’m trying to do inserts, and know that in some cases I will violate unique index.
I’m using stored procedure, and want to handle the error gracefully there – just move on.
Reading from text-based log files via .vbs and get back the nasty popup window.
Looks like I have it right but obviously I don’t considering how it’s (not) working.
I thought error handling would be the simplest way to avoid dupe records. Might be necessary to run the same log in more than once, and only want to add the new records since the last insert session.
Here’s what I have. It obviously simply halts and complains immediately after the insert attempt.
ALTER procedure eml_HubInsert @TimeStamp bigint ,@UID varchar(255) ,@Type varchar(255) ,@MailBox varchar(255) ,@ServerID varchar(50) as insert into audit_hub (TimeStamp,UID,Type,Mailbox,ServerID) values (@TimeStamp,@UID,@Type,@MailBox,@ServerID)
1 question: What Error-Handling msut i mplement in a trigger, who is updating permanently two tables in a database (with the follow commands: insert, delete and update) ???
I have some stored procedures that insert information from a third party plugin that hooks into our database (so I can't do any client side validiation). The problem I am encountering is that some of the fields I use need to be in DateTime format. In order for SQL SERVER 2000 to be able to insert this field, the Date has to be in the correct syntax or an error is thrown.
Is there any way to do something like this in SQL SERVER 2000
Code:
DELCARE @SomeDate DateTime
Try Set @SomeDate = CONVERT(DateTime, Parameter1, 101) Catch return custom error describing what field is formatted wrong and exit stored procedure END
I am running some bcp copies through a Sql job. I am copying 35 tables in individual steps. However, sometimes the bcp step fails to copy the data, and I want the step to fail if the data is not copied properly. Is that possible? If so, how? Any help is greatly appreciated.
