Error In DTSX At The End Of Long Running ETL Process
Feb 14, 2006
Hi,
We have a DTSX in which parallel threads are processing ETL. There is a Final step in the DTS to do cleanup tasks. we are getting the following error after ETL completes. This is not consistently reproduced.
Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to complete login process due to delay in prelogin response". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: Timeout error [258].
Connection manager is set as Localhost.
Can somebody help us out here?
thanks
View 1 Replies
ADVERTISEMENT
Jan 10, 2001
Hi all,
I have 3 three scheduled job: one runs onece a day, one runs once per hour, and another runs every 17 minutes. It is a NetIQ application. I just scheduled SQL Server maintianace job last night which ran at 2:00Am and 4:00Am. This morning, I came in office and found all my jobs were still running; and they were all blocked by the first 3 jobs. I had to kill all of them. In this afternoon, I kicked off one of my many DTS packages which runs usually about 40 minutes, but it failed. I tried several times but no luck. I suspected one of user tables corrupted or one of stored procedures corrupted. After I recycle the server, and dropped the table and the stored procedure, and recreated them, the package went fine. The store procedure involves many updates and inserts.
The question I have is: is it possible to cause this problem because I killed the unfinished jobs (especially the sql maintanace job)?
NOTE: the sql maintanace job does not include the backup of database and transaction log.
View 1 Replies
View Related
Apr 13, 2007
I have a SQL procedure that can take several minutes to complete. I allow users to initiate the process through a web site and view a progress bar. When the process is running, though, the site slows to a crawl or times out completely. That long running process seems to block all other queries on the database. Is there a way to give this process a low priority or somehow throttle its resource use so that the other web processes can get a chance to run in a timely manner?
Thanks for any advice.
View 4 Replies
View Related
Aug 21, 2014
What do I need to stop this error?
Started: 5:05:48 PM
Error: 2014-08-21 17:05:50.64
Code: 0xC000F427
Source: File System Task
Description: To run a SSIS package outside of SQL Server Data Tools you must install File System Task of Integration Services or higher.
End Error
View 1 Replies
View Related
Feb 23, 2007
Hi, I have a package that I am running concurrently with different values. and sometime I'm getting following message for one of the running instances and it fails while the other ones are running.
Execution failed with the following error: "ERROR : errorCode=0 description=Failed to save package file "C:Documents and SettingssmillerLocal SettingsApplication DataMicrosoftSQL ServerSmoInnerPackage.dtsx" with error 0x80070020 "The process cannot access the file because it is being used by another process.". helpFile=TableTransferGenerator Task helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Any ideas what is the reason I have search everywhere for keyword InnerPackage.dtsx as this is not my package name and it is getting created by SSIS enginee
Thanks
View 16 Replies
View Related
Jul 11, 2014
I have an execute process task in SSIS that executes a .Net program.When this is running as a Sql Server Agent job in Sql Server 2005, I have no issues. The operating system of the server is Windows Server 2003 R2.
Now I'm trying to get this working as a Sql Server Agent job in Sql Server 2012. The operating system of the server is Windows Server 2012 R2. And now I have issues.
If I run the SSIS package in Visual Studio debug mode, I have no issues! It's only when I try running the same package from a Sql Server Agent job that there are problems. The .Net program errors out with a System.TypeInitializationException.
I thought this might be an issue running the .Net program as 64 bit so I changed the agent setting to 32 bit. That didn't work. I thought it might be an issue with authorization (since I can run it in debug with me as the user). I put in a class in the program that changes the user through impersonation. That didn't work either.
Since I don't have a full-blown version of Visual Studio on the database server, I haven't been able to capture the error and debug the program to see where it is blowing up.
why something like this would work in Sql Server 2005/Windows 2003 but not in Sql Server 2012/Windows 2012 when run as an agent job? And on top of that, why would it work when I run it manually in debug mode but not when run as an agent job?
View 5 Replies
View Related
May 26, 2015
I have a table that I need to identify similarities so I'm running a Fuzzy Grouping Process. I'm getting the follow errors and I can't identify the problema since all the fields are varchar, except for the first that is int but not use in the fuzzy.
select
MSSEndCustomerTPID
, orgname
, address1
, cityname
, statename
, countryname
from [sales].[vw_Fact_VolumeSales] a
inner join [GMOFBI].[dbo].[vw_Dim_MSS_Organization] b
on a.EndCustomerOrganizationKey=b.MSSOrganizationKey
[code]...
View 3 Replies
View Related
Jan 8, 2008
Hi,
Can someone explain how the PR testharness is supposed to function? When I run it f with and without debugging and by using dtexec other processes can start and stop before the awaiting response from the console date and number of days to process. If you just look at the testharness and the loadgroupfulldaily the increment date and SQL Audits will finish prematurely before the console data is even entered. Is there a property that I am missing?
Thanks,
Larry
View 1 Replies
View Related
Sep 1, 2006
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
Is there a way to do this?
Thanks
View 1 Replies
View Related
Aug 31, 2007
I get the following error:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".
The above path "I:...." is mapped on the server that SQL Server is running on.
This package runs with NO problems in MS Visual Studio.
View 1 Replies
View Related
Sep 17, 2007
Where do I find about running an SSIS package (.dtsx) from a ASP.Net web service, particularly issues to do with permissions
cheers
Rob
View 1 Replies
View Related
Sep 25, 2007
I'm experiencing some frustration with my active/passive SQL cluster not running my .DTSX packages. I am hoping someone can shed some light on what I need to do.
I've created some .DTSX packages with the SQL Server Business Intel Dev Studio. I initially built & tested these packages in a non-SQL cluster environment without any problems. I'm now re-creating them to work on our SQL cluster. If I run the package through the Dev Studio it works great.
The packages basically grab .txt files from one of the shared drives (which is a resource of the sql cluster group) and imports the data into the one of the databases. The database does not have any special settings (right-click -> new database... -> enter name -> click ok).
I've setup a SQL Server Agent Job with 1 step with the following properties.
Step name: I Offices
Type: SQL Server Integration Services Package
Run as: SQL Agent Service Account
Package source: File system
Package: G:ImportRAGFLOffices.dtsx
When I run the SQL Server Agent Job through MSSQL Server Management Studio (right-click -> start job) I get an error on "Execute job 'RAGFL TestJob'".
These are the 2 messages that show up when I view the history of the SQL Server Agent job.
***********************************************************************************************
Date 9/25/2007 1:16:13 PM
Log Job History (RAGFL TestJob)
Step ID 0
Server BADBOYS
Job Name RAGFL TestJob
Step Name (Job outcome)
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (I Offices).
***********************************************************************************************
***********************************************************************************************
Date 9/25/2007 1:16:13 PM
Log Job History (RAGFL TestJob)
Step ID 1
Server BADBOYS
Job Name RAGFL TestJob
Step Name I Offices
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: THEISLANDAdministrator. The package execution failed. The step failed.
***********************************************************************************************
THEISLAND is our internal domain.
View 2 Replies
View Related
May 13, 2008
Hello all -
Based on advice from this board, I am setting up our newly-converted DTSX packages (sql server 2000 (DTS) to 2005 (SSIS) package conversion) to utilize package configurations to make it easier to run them in multiple environments (dev, testing, production, etc...). This seems to be working just fine, but I now have another question.
We have approximately 12 DTSX packages which need to be executed in a specific sequential order. I was wondering what the best / most widely accepted method is to allow for running them as an automated process. If you double click on each DTSX file individually, the "Execute Package Utility" pops up, and you can run the package. I'd like to know the best way for us to be able to run each package, one after the other (each one waiting until the previous one completes before it begins), until they have all processed. It would be nice if it did not rely on SQL Server being installed on the machine on which it is being run...
thanks for all the fantastic support on this site
View 6 Replies
View Related
Jun 1, 2006
To all,
Im migrating data but its taking too long to commit insertion, what sould i do?
merwinp
View 2 Replies
View Related
Jun 19, 2007
dear guys. i have this one problem, where the sql statements really took very long time to be processed. It took more than 1 minute, depending on the total data in the table. I guest this have to do with the 'count' statements. here is the code:
------------------------------------------------------------
$sql = "SELECT company,theID,abbs,A as Active,N as Nonactive,(A+N) as Total
FROM(
select distinct D.nama As company, C.domID As theID, D.abbrew As abbs,
count(distinct case when B.ids is NOT NULL THEN A.dauserid END) As A,
count(distinct case when B.ids is NULL THEN A.dauserid END) As N
FROM
tableuser A LEFT OUTER JOIN tabletranscript B on (A.dauserid=B.dauserid)
INNER JOIN thedommember C ON(C.entitybuktiID=1 AND C.mypriority=1 AND
C.entitybuktiID=A.dauserid)
INNER JOIN mydomain D ON (C.domID=".$getID.")
GROUP BY D.nama, C.domID, D.abbrew
ORDER BY company
)";
Hope any of you can simplify this statements into a query that doesnt take ages to be processed.
Thanks in advance....
View 1 Replies
View Related
Sep 1, 2006
Good afternoon everyone, I have written a view that pulls customer demographic infomration as well as pulling data from multiple scalar-valued functions. I am using this view to pull and send data from one database to another in the same SQL server. The problem that I am having is that I am running this import as a scheduled job in windows. The job is taking almost 24 hours to complete this task. The total number of records that are being pulled is around 21,000+. I have tried removing the functions from the view and it only takes the view 20 seconds to pull the demographic information from the same 21,000+ records but when I add the function calls this is where the time to complete goes through the roof. Has anyone encountered this before if so what would you suggest doing? Any help would be appreciated. Here is the syntax for my view: SELECT TOP 100 PERCENT CUS_EMAIL AS Email, CUS_CUSTNUM AS MemberID, CUS_PREFIX AS Prefix, CUS_FNAME AS FirstName,
CUS_LNAME AS LastName, CUS_SUFFIX AS Suffix, CUS_TITLE AS Title, CUS_STATE AS State, CUS_COUNTRY AS Country, CUS_ZIP AS ZipCode,
CUS_SEX AS Gender, CAST(CUS_DEMCODEA AS nvarchar(20)) + ',' + CAST(CUS_DEMCODEB AS nvarchar(20))
+ ',' + CAST(CUS_DEMCODEC AS nvarchar(20)) + ',' + CAST(CUS_DEMCODED AS nvarchar(20)) AS DemoCodes,
dbo.GetSubScribedDateMLA(CUS_CUSTNUM, CUS_EMAIL) AS MLASubscribedDate, dbo.GetSubScribedDateMLP(CUS_CUSTNUM, CUS_EMAIL)
AS MLPSubscribedDate, dbo.GetSubScribedDateLDC(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubscribedDate, dbo.GetMLAExpiration(CUS_CUSTNUM,
CUS_EMAIL) AS MLASubExpireDate, dbo.GetMLPExpiration(CUS_CUSTNUM, CUS_EMAIL) AS MLPSubExpireDate,
dbo.GetLDCExpiration(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubExpireDate, dbo.IsProspect(CUS_CUSTNUM, CUS_EMAIL) AS AGMProspect,
dbo.IsCurrentCustomer(CUS_CUSTNUM, CUS_EMAIL) AS AGMCurrentCustomer, dbo.IsMLAMember(CUS_CUSTNUM, CUS_EMAIL) AS MLAMember,
dbo.IsMLPMember(CUS_CUSTNUM, CUS_EMAIL) AS MLPMember, dbo.IsLDCMember(CUS_CUSTNUM, CUS_EMAIL) AS LDCMember,
dbo.CalculateTotalRevenue(CUS_CUSTNUM, CUS_EMAIL) AS AGMTotalRevenue, dbo.GetPubCodes(CUS_CUSTNUM, CUS_EMAIL)
AS ProductsPurchased, dbo.GetEmailType(CUS_CUSTNUM, CUS_EMAIL, CUS_RENT_EMAIL) AS EmailType, CUS_COMPANY AS Company,
CUS_CITY AS City
FROM dbo.CUS
WHERE (CUS_EMAIL IS NOT NULL) AND (CUS_EMAIL <> '') AND (CUS_EMAIL_VALID = 'Y') AND (CUS_EMAIL LIKE '%@%.%') AND (CUS_RENT_EMAIL = 'Y' OR
CUS_RENT_EMAIL = 'R' OR
CUS_RENT_EMAIL = 'I') AND (CHARINDEX(' ', CUS_EMAIL) = 0) AND (CUS_EMAIL NOT LIKE '@%')
Thanks in advance Michael Reyeros
View 9 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Aug 22, 2007
I have a pretty complex query that aggregates lots of data and inserts multiple rows of that data into a reporting table. When I call this SPROC from SQL Server Management Studio, it executes in under 3 seconds. When I try to execute the same SPROC using .NET's SqlCommand object the query runs indefinitely until the CommandTimeout is reached. Why would this SPROC behave differently with the same inputs, but being called from .NET? Thanks for your help!
View 3 Replies
View Related
Aug 20, 2001
Hi everyone.... I'm trying to execute this update statement... It takes an eternity... any ideas on how to rewrite or speed it up?
It's a several step process... below is everything that i run, one step at a time. The final update statement is what takes so long. It should only affect about 2600 rows out of a potential 9000. That's why I'm confused on the response time
select d.olddevicename, de.device, d.newdevicename into #temp9
from dns d, devices de
where de.device = d.olddevicename
update #temp9 set device = newdevicename where olddevicename = device
update devices set device = #temp9.device from #temp9, devices where #temp9.device in
(select #temp9.device from #temp9, devices where #temp9.olddevicename = devices.device)
Thank you!
J.
View 1 Replies
View Related
Feb 7, 2003
When I execute the following stored procedure it runs for about a minute.
CREATE PROCEDURE EquipmentListByProduct
(
@iProdTypeId int
)
AS
SET NOCOUNT ON
DECLARE@iError int, @iRows int
SELECT pn.prodTypeId, pn.prodId, pn.prodName
FROM prodNames pn
WHERE pn.prodTypeId = @iProdTypeId
SELECT@iError = @@ERROR, @iRows = @@ROWCOUNT
IF ( @iError <> 0 )
BEGIN
RETURN@iError
END
IF ( @iRows = 0 )
BEGIN
RETURN-1
END
RETURN@iError
GO
The table only has 22 records.
Do I need to index the table? If so how do I do this?
View 4 Replies
View Related
Mar 11, 2003
My backups are running 5-6 hours on SQL2000. I'm sure they only used to take 1 hour or so. On another server, backing up the same database (both about 50 gig), the backup only takes 45 min - 1 hour. What can I look at to see why it's taking so long ?
(edit) I'm using a maint plan to backup to disk
View 3 Replies
View Related
Jul 30, 2004
Trying to come up with a way to monitor (without profiler, hopefully with a job and a select statement) a specific sql job that may cause a problem if the duration is too long. It seems that there is an sp called sp_sqlagent_log_jobhistory that shoves a record in sysjobhistory, but only after all the job steps run. Anyone tried this before?
View 1 Replies
View Related
Apr 3, 2008
1. could any one tell me in a simple way how to troubleshoot long running queries.
2.what is the default recovery model
View 6 Replies
View Related
May 9, 2008
Hello,
I want to find long running queries?
Can any one help me?
Thanks
Prashant Hirani
View 4 Replies
View Related
Jun 4, 2008
Hello Gurus
I am using sql 2005 and one job status is executing in job monitor in 2005,How can i check since how long this job is running?
Please advice
Nitin
View 4 Replies
View Related
Jul 20, 2005
I've got a server (SQL 2K, Win2K) where the backupshave started running long.The database is a bit largish -- 150GB or so. Up untillast month, the backups were taking on the order of4 to 5 hours -- depending on the level of activity on theserver.I'm using a T-SQL script in the SQLAgent to run thebackups. Native SQL backup to an AIT tape drive.Now, for no apparent reason, the backups are takingon the order of 24 to 26 hours. The backups completesuccessfully -- no errors, just taking an outrageouslylong time to complete. DBCCs check out AOK, noproblems with the database.No changes to the machine. No hardware changes. Nosoftware changes. Weird.Multiple tape media have been tried -- it's not a caseof a tape going bad.We've had no problems with this box for almost 4years. Now it's gettin' jiggy with us!Any ideas on where to start with this one?Thanks in advance.
View 1 Replies
View Related
Jul 6, 2007
Hi. I'm fairly new to SSRS, and very new to this forum. I have a report based on a stored procedure. I've optimized the procedure so that it runs from 2-4 minutes (previously over half an hour). However, when I run the report that calls the sp, it runs forever (well over 45 minutes in some cases), and the users basically give up on it. Any ideas of why this happens and what steps I can take to improve performance?
Thanks,
Marianne
View 4 Replies
View Related
Dec 21, 2006
I need to execute a long running package (it takes about 16 hours to finish) to load a data warehouse for the first time with all historical data. This package it's a master package and execute other packages; I log the start time and the finish time of the package in a table to manage future incremental loads.
I executed the package on sql server where it is saved, but after 8 hours it was running, a new package was started automatically. Then two more packages started .. each every two hours.
I set the MaxConcorrentExecutable = 4, this could affect this strange behavoir ?
Anyone could imagine wath happened ?
Thanks
Cosimo
View 3 Replies
View Related
Jun 2, 2006
Hi,
I'm trying to optimize a long running (several hours) query. This query is a cross join on two tables. Table 1 has 3 fields - ROWID, LAt and Long. Table 2 has Name, Addr1,Addr2,City,State,Zip,Lat,Long.
Both tables has LatRad - Lat in radians, LonRad- Lon in Radians. Sin and Cos values of Lat and Lon are calulated and stored to be used in the distance formula.
What I'm trying to do here is find the nearest dealer (Table 2) for each of Table 1 rows. The Select statement takes a long time to execute as there are about 19 million recs on table 1 and 1250 rows in table 2. I ran into Log issues- filling the transaction log, so I'm currently using table variables and split up the process into 100000 recs at a time. I cross join and calculate the distance (@DistValues) and then find the minimum distance (tablevar2) for each rowid and then the result is inserted into another Table (ResultTable).
My Code looks like this:
Declare @DistValues table (DataSeqno varchar(10),Lat2 numeric(20,6),Lon2 numeric(20,6),StoreNo varchar(60), Lat1 numeric(20,6),Long1 numeric(20,6),Distance numeric(20,15))
Declare @MinDistance table (DataSeqno varchar(10) primary key,distance numeric(20,15))
Insert into @DistValues
Select DataSeqno,T.Lat Lat2,T.Lon Lon2,S.StoreNo,S.Lat Lat1,S.Long Long1,
distance=3963.1*Case when cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15)) not between -1.0 and 1.0 then 0.0 else acos(cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15))) end
from dbo.TopNForProcess T , dbo.Table2 S where Isnull(T.Lat,0) <> 0 and Isnull(T.Lon,0)<> 0
Insert into @MinDistance
Select DataSeqno,Min(distance) From @DistValues Group by DataSeqno
Insert into ResultTable (DataSeqno,Lat2,Lon2,StoreNo,LAt1,Long1,distance)
Select D.DataSeqno, D.Lat2, D.Lon2, D.StoreNo, D.LAt1, D.Long1, M.distance from @DistValues D Inner Join @MinDistance M on D.DataSeqno = M.DataSeqno and D.Distance = M.Distance
I created a View called TopNForProcess which looks like this. This cut down the processing time compared to when I had this as the Subquery.
SELECT TOP (100000) DataSeqno, lat, Lon, LatRad, LonRad, SinLat, cosLat, SinLon, CosLon FROM Table1 WHERE (DataSeqno NOT IN (SELECT DataSeqno FROM dbo.ResultTable)) AND (ISNULL(lat, 0) <> 0) AND (ISNULL(Lon, 0) <> 0)
I have indexes on table table1 - Rowid and another one with Lat and lon. Table2 - Lat and Long.
Is there any way this can be optimized/improved? This is already in a stored procedure.
Thanks in advance.
View 7 Replies
View Related
Feb 10, 2008
Hello,
I am having some difficulty with data-driven processes in an internal web application using ASP.NET framework 2.0 with SQL Server 2000.
I have a facility where the user enters search criteria to retrieve a list with the idea being that when they click a button the list set is migrated to a table as a batch. The SQL Server processes to perform the database operations can take up to 5min because of volume of data and relational complexity, which is fine.
The only problem is that I'm having trouble managing the SQL Server process if the user closes the browser or go to a new URL etc. If this happens on the client side it's like the HTTP request is terminated but the SQL statement left on the SQL Server still running, eventually it runs to completion but I would prefer the SQL process to also be abandoned and rolled back.
Any idea what is happening here and how it can be handled?
Thanks for any help.
A.C
View 2 Replies
View Related
Mar 5, 2002
Hello All
I have queries which take over 30 secs to run, which I wish to monitor.
Currently, I am monitoring using sql profiler.
Is there any way of setting up mail to e-mail me when such a query happens.
Could I set up an Alert, or is there some other method.
I want to be able to react to these events faster before the users complain.
I am using sql server 7 enterprise and I have exchange set up.
Any help would be great
Pargat
View 2 Replies
View Related
Jun 5, 2001
Hi there!,
Problem: I schedule a job that calls a stored procedure which loads around 1.5 million records. The Job takes 19 hrs to complete. However, if i run that stored procedure manually in Query Analyser it takes only 45 minutes..
Did anyone faced this problem? Is this known problem..Any suggestions/recommendations?
thank you.
regards,
Nana
View 6 Replies
View Related
May 13, 2005
Hello,
I have a very long running stored proc (import and transformation of 2-3 M. records). The duration of about 1h is not the problem.
My problem is that i want to send some notifications to the UI for showing a progress counter in the UI.
Is there any possibility to send send out a msg after certain steps (e.g. after positioning the cursor to next row) via an extended stored procedure which I could catch in my UI?
I would be very appreciative if somebody would send me a hint.
Thank you,
selo
View 4 Replies
View Related
