Error In Lookup Transform (Advice Please!!)
May 14, 2008
Hi,
I get the following error when
i configure the lookup transform in the data flow task "Input column has a data type that cannot be matched".
This is the query that i use to set the reference table dataset
select firstname, lastname, address, email from customers_dimension cd , cust_test ct where cd.address<>ct.address.
I basically want to try and find all those records that have the same firstname, lastname, email in the customer dimension table where the records do not match. Both the input fields and the lookup fields have the same data type [varchar(max)].
It is pretty confusing, so much so that i did the lookup against the exact same table and got the same error.
Does anyone have a better idea as to what the problem is?
Thankyou
P.S.-This is the caching statement in the advanced tab
select * from
(SELECT firstName
FROM Customers_Dimension) as refTable
where [refTable].[firstName] = ?
View 1 Replies
ADVERTISEMENT
Oct 25, 2005
I'm trying to lookup a value in another table linking on a column of datatype DT_R8. The lookup transform is complaining that I can't link on that datatype. However, the documentation says that it should work. I'm using the April CTP. Is this fixed in a later version? Any suggestions?
View 6 Replies
View Related
Aug 22, 2007
I have a very simple problem I am trying to solve.
I have a table with a "DateEntered" field, and I have an ssis pkg set up to load data from a file into the database table. I just want to make sure that no one loads the same file twice in one day.
For example, if today is 8/22/07, and "DateEntered" is "2007-08-22", then I want to add a Lookup transform to run a query that will check and see if there's any rows in the table with a "DateEntered" is "2007-08-22". If so, don't load the file again!
Here's my query:
SELECT Code
FROM myTable
WHERE DATEADD(dd, DATEDIFF(dd, 0, DateEntered), 0) = DATEADD(dd, DATEDIFF(dd, 0, GETDATE()), 0)
(all the dateadd stuff is doing is removing the time portion from the DateEntered field, so we are comparing apples to apples).
Now, if the query returns a bunch of "Codes" then we know that the data has already been entered for the day! So far, so good.
Now, how do I set up the Lookup to get it to work? I'm getting this error message:
Error 1 Validation error. Data Flow Task: Lookup [1299]: The lookup transform must contain at least one input column joined to a reference column, and none were specified. You must specify at least one join column. FXRateLoader.dtsx 0 0
But I thought I did this! On the columns tab, I have:
Lookup column: code
Lookup operation: Replace 'code'
Output alias: code
I have my error output set to:
Lookup output - redirect row
I don't know what I'm doing, obviously..........!
Need assistance :-)
View 13 Replies
View Related
Jan 24, 2007
Hi!
I am a newbie, grateful for some help. I have a Source Ole DB w sql-command selecting the customer.salary and customer.occupation, which I want to match with demo_id in Ole DB destination.
salary, occupation also in dim_demographic.
But in Lookup editor I find no column demo_id... how do I do this?
View 20 Replies
View Related
Jun 25, 2007
Please suggest me an article that describes 'Lookup Transform' (Specifically passing parameters) in detail.
Note: Is it possible to pass "variable" as parameters in Lookup transform?
View 10 Replies
View Related
Apr 16, 2007
Dear friends,
I have a ETL that have a Lookup transform to get a rate from a table SpotRates.
The problem is when the match od some date in SpotRates Table doens't exist...
And for that records I need to lookup for next date...
For example...
SpotRate Table
Date
Currency
Rate
05-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2262
06-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2312
07-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2179
10-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2099
11-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2105
12-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2125
13-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2094
18-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2252
19-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2346
20-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2346
21-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2315
24-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2365
25-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2425
When I first try to lookup the date 17-04-2006, doesnt give me any records... and I need to create a new lookup for the next date from 17-04-2006. And in this example the next date is 18-04-2006.. How can I do it??
I made a sql query date gives me the next date with 2 parameters ... but I'm having some errors...
SELECT TOP 1 Data
FROM Spot_Rates
WHERE (Currencies_Name = ?) AND (Data > CONVERT(DATETIME, ?, 102))
ORDER BY Data DESC
In this exampple, the parameters returned from lookup1 is:
Currencies_name= 'DOLAR ESTADOS UNIDOS'
DATE='17-04-2006'
I need to create a second lookup transform to return the next date/currency for each row that didnt match in the first lookup...
Regards,
Pedro
View 16 Replies
View Related
Aug 10, 2007
I want to do something relatively simple with SSIS but can't find an easy way to do this (isint it always the case with SSIS )
I have a column lets say called iorg_id, and I want to lookup the matching rows for this col in a table.
In this table iorg_id may have several potential matching rows. In this table there is another col called 'Amount'.
I want to retrieve for each iorg_id the matching iorg_id in the other table but only the row with the largest value in the 'Amount' col.
I couldn't find a way to do this all in the Lookup Transform.
I can match the iorg_ids and retrieve the Amount column, but can't find a way just to retrieve the matching row with the largest value in the Amount col. The only way I can think to do this is then run the output from the Transform through an Aggregate function and determine the Max (although haven't tested this yet).
Seems strange to me in that the SQL in the Advanced tab gives me something like:
select * from
(select * from [dbo].[Table1]) as refTable
where [refTable].[iorg_id] = ?
where I believe the first 'select *' is retrieving all the cols that are listed in the LookupColumns list in the Columns tab.
I thought I would be able to amend this to something like:
select max(amount) from
(select * from [dbo].[Table1]) as refTable
where [refTable].[iorg_id] = ?
but I get a metadata type error.
So, questions are:
Is it possible to do this all in the Lookup Transform are do I have to use the Aggregate function as I think ?
Why is it not possible to amend the sql in the Advanced tab to manipulate the returned data ?
View 3 Replies
View Related
Oct 27, 2007
I am trying to digest this logic, and have been unsuccessful so far. I am designing a package for incremental loads, but the destination table has a composite primary key on 2 columns, one of which is nullable. The source data comes from a SPROC. Uptill now, I have been banging my head trying to get this logic to work via the Lookup transform with a conditional split, but it doesn't work. Am I on the right track, or should I be using the SCD Wizard?
As a side note, I have been trying to work a solution using Andrew's blogpost on doing incremental loads: http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
Thanks.
View 8 Replies
View Related
Aug 3, 2007
Please indulge my ignorance, as I have only been using SSIS for a couple of weeks.
I'm trying to create a data warehouse using two input tables.
A column needs to be added to one table by using a lookup into the second table.
SSIS seems to handle the "no matches" and "single match" cases perfectly.
I can't for the life of me figure out how to properly handle multiple matches.
SSIS defaults to the first match, but I need to compute the "best" match.
Many thanks in advance
Scott!
View 3 Replies
View Related
Jun 8, 2006
Is it possible to use a VARIABLE in the Lookup Transform? I am setting the cache mode to partial and have modified the caching SQL statement on the advanced tab to include the parameterized query, but the parameter button only allows me to select columns to map to the parameter. I need to use a variable instead. I see the ParameterMap property of the transform in the advanced editor, but don't see how I can use this to map to a variable.
Can this be done, or do I need to use a new source, sort and left join component to accomplish the same thing?
Thanks!
Brandon
View 3 Replies
View Related
Oct 31, 2006
Hi,
i'm creating a Lookup programmatically. But i can't find out how to assign the ConnectionManager that references the lookup data.
Do you have an example for me?
Many thanks in advance.
Stefan L.
View 4 Replies
View Related
Mar 14, 2006
I am having problems with a lookup transformation. I have a row in my lookup table for blank ('') source data. If I test the join using SQL the match is made, but the Lookup transform doesn't consider it a match and sends it to error output. Is there a property that I don't have set correctly or something else I am forgetting?
View 5 Replies
View Related
Nov 24, 2007
Has anyone find solution for this problem.
i also checked
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=298056&SiteID=1 and
http://blogs.conchango.com/kristianwedberg/archive/2006/02/22/2955.aspx
Suppose have a Dimension table
DimColor
----------------------------
ColorKeyPK(smallint) ColorAlternateKey(nvarchar(30))
-1 UnknownMember
1
2 Blue
3 Red
4 Black
Color with the ID 1 is empty string
FactOrders
---------------------------
OrderID Date Color Quantity
OrderID = 1 Color = 'Black' Quantity = 10
OrderID = 2 Color = 'Red' Quantity = 20
OrderID = 3 Color = '' Quantity = 10
OrderID = 4 Color = 'Blue' Quantity = 5
OrderID = 5 Color = Black Quantity = 10
When i use the Lookup transform it cannot find the ColorKeyPK
The result of the Lookup transform is.
------------------------------
OrderID = 1 Color='Black' ColorKey=4
OrderID = 2 Color='Black' ColorKey=3
OrderID = 3 Color='Black' ColorKey=NULL ----> This is the problem Lookup cannot find empty string. It should be 1.
OrderID = 4 Color='Black' ColorKey=2
OrderID = 5 Color='Black' ColorKey=4
Thanks from now.
View 5 Replies
View Related
Sep 6, 2010
I've a simple lookup transform in SSIS 2008 (R2). I've created it with a full cache and it worked fine. When i switch to partial cache, it will give me this error:
--------------------------------------------------------------------------------------------------
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at DFT_AdventureWorks [Lookup [411]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[Code] ....
I've created a OLE source with the following query :
SELECT
SalesOrderID,
OrderDate,
CustomerID
FROM Sales.SalesOrderHeader
And this will flow into the lookup transform and this has the following lookup reference query:
SELECT CustomerID,
AccountNumber
FROM Sales.Customer
WHERE CustomerID % 7 <>0
View 2 Replies
View Related
Jul 10, 2007
I have a package that works fine in development. I move the package over to test and it fails validation in the lookup transform.
Error 46 Validation error. Data Flow Task - PO Lines Interface: Lookup - LIST PRICE [29621]: output column "LIST_PRICE_PER_UNIT" (29667) and reference column named "LIST_PRICE_PER_UNIT" have incompatible data types. SPO_TO_ORACLE_PO.dtsx 0 0
What strikes me as odd is the fact that I don't have a way of specifying the data types. I just specify the column I wish to return as a new column with the same name. Anyway, why would this work in one instance but not another?
thanks
John
View 4 Replies
View Related
Oct 20, 2007
I am using the lookup transform with the following settings:
Reference table: Use results of an SQL query. The query retrieves the surrogate key and four business key columns from a dimension table which contains a few thousand rows.
Columns: business keys in the incoming data are mapped to the business keys in the reference table, and the surrogate key is looked up from the reference table.
Advanced: Enable memory restriction is OFF (and the other items on the Advanced tab are greyed out).
I assumed that this means that the lookup transform would cache all of the rows in the SQL query, and then perform the lookups against this cache. This is the behaviour that I saw when I was running the package in my local environment in the BIDS debugger.
However, a colleague was doing some profiling on our production database server, and noticed that the lookup transform is instead issuing a single SQL query for each row of input. Our production ETL server has many GBs of free RAM available (way more than enough to cache the contents of the lookup table in memory), and given that memory restriction is disabled, I don't understand why the lookup transform is behaving in this fashion. Does anyone have an explanation for this? I'm probably misunderstanding a key concept here.
Thanks,
Greg
View 8 Replies
View Related
Feb 6, 2007
I have a requirement to access a lookup table from within an SSIS Transform Script Component
The aim is to eliminate error characters from within the firstname, lastname, address etc. fields by doing a lookup of an ASCII code reference table and making an InStr() type comparison.
I cannot find a way of opening the reference data set from withing the transform.
Regards
Tim
View 3 Replies
View Related
Jan 16, 2013
I work in the healthcare area, and am handling the survey data ETL's. There are around 8 different survey areas and based on information received from them for the visit they reference, I want to pull in more info from our invoicing database. My idea is this:
1.)Â Pull in the flat file to an ODBC staging table
2.)Â Cache all invoice records that fall between the MIN(Date of Service) and MAX(Date of Service) from the staging table.
3.)Â First lookup the information needed on patientID, providerID, date of service, and billing location.
4.)Â For the surveys that didn't match on those 4 columns, try looking up based on patientID, date of service, and billing location (since I could be 99% sure this would still return the record I need).
5.) For the remaining surveys, lookup based just on patientID and date of service. These records will be flagged for manual review because clearly, if a patient has multiple appointments in the same day, this will be prone to error.
However, in trying to use only 3 of the columns in the lookup, I get the error saying basically that I need to utilize all 4. Is there a way around this, or is there an entirely different way I should be approaching this? The reason I thought cache transform was the answer is because I will need to run a different package for each lookup, as the data and logic between each survey will vary, but the invoice data "pool" will stay the same regardless.Â
View 5 Replies
View Related
Aug 9, 2007
I would like to know what happens when a very large reference data set for a lookup transform with full caching enabled is getting loaded during package execution and the computer memory runs out or is very low.
Does SSIS
a) give an out of memory error of some sort
b) resort to a no caching or partial caching mode
c) maintain the full caching mode but will switch to using the paging file(virtual memory).
I think it will resort to using the page file in which case the benefits of in memory lookups are lost and performance would suffer. If I cannot upgrade the memory or shrink the reference set somehow, i should switch that lookup task to use partial caching or no caching with an indexed lookup table. Would this make sense?
View 1 Replies
View Related
Jul 30, 2015
We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
View 2 Replies
View Related
Sep 1, 2006
I am trying to interpret some of the results I observe when trying to match similar records using a fuzzy lookup transform, but it's not entirely clear how the overall row similarity score is calculated. In particular, sometimes rows with lower individual column similarity scores will achieve a higher similarity and confidence score than a matching row with higher individual column scores.
The transform is configured with 6 text fields set to fuzzy mapping and a minimum similarity of 0, and 3 additional numeric fields with an exact mapping. It is set to return a maximum of 2 matches per lookup and to do an exhaustive search of the reference table.
For example, from the following matching pair of records Match 1 is picked over Match 2 even though it's individual scores are lower.
Match 1 Match 2
----------------- -----------------
_similarity_author 1.0 1.0
_similarity_title 0.85344648 1.0
_similarity_headline 0.0125 0.0125
_similarity_summary 0.0125 0.0125
_similarity_picture 1.0 1.0
_similarity_caption 1.0 1.0
_similarity 7.8429267E-2 7.3196657E-2
_confidence 0.55728668 0.44271332
In another case both matching records have *identical* scores for every mapped column and yet their similarity and confidence scores are different.
Clearly there are other factors involved in calculating the overall row score. Anybody know what these are?
Fernando Tubio
View 2 Replies
View Related
Sep 26, 2007
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
View 4 Replies
View Related
Jan 5, 2006
Hey, did someone try to use the pivot transform?
It's not what you would call easy to configure...
In BOL there is the following section:
ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/extran9/html/55f5db6e-6777-435f-8a06-b68c129f8437.htm
I have followed the instructions there and I get an error when I try to map the new output column to the pivotkey:
"Output column "Yellow" (69) cannot be mapped to PivotKey input column"
So I mapped the new output column to the column holding the quantity values. This worked.
May this be a bug in BOL?
Further on I got some strange behaviour of the pivot transform:
My input is the following CSV-Flatfile:
sk1;sk2;pk1;qty
A;1;Yellow;2
A;1;Green;1
B;1;Yellow;5
A;2;Blue;3
A;2;Green;9
A;1;Green;5
If I omit the last line, everything is fine.
When passing the file as is into the pivot transform the output is:
SK1 SK2 Yellow Green Blue
A 1 2 1 NULL
B 1 5 NULL NULL
A 2 NULL 9 3
A 1 NULL 5 NULL
As you can see the key a;1 is duplicate. The cols SK1 and SK2 are my primary key of the destination table.
When the input is sorted by the first two colums the pivot transform throws an Error:
Error: 0xC02020CF at Pivot w sort, Pivot [39]: Duplicate pivot key value "Green".
I expected to have a sum over all Green for the key A;1. It seems that I have to use an aggregate which in my opinion should
be obsolete here.
As a conclusion I have to say that this task is far away from perfect but not bad for a start.
Regards
Fridtjof
View 3 Replies
View Related
Sep 5, 2007
I can't for the life of me figure out why I am getting an error with this simple script. The error I get is "expected end" on line "22" which is the first "elseif" in the nested if statement. This makes no sense as obviously I don't want an end if statement there. Any ideas where my syntax is wrong would be greatly appreciated.
'************************************************* *********************
' Visual Basic Transformation Script
'************************************************* ***********************
' Copy each source column to the destination column
Function Main()
dim txncode
dim cashin
txncode = Trim(DTSSource("Col004"))
Cashin = Trim(DTSSource("Col005"))
if txncode = "" or IsNull(txncode) then
Main = DTSTransformStat_SkipRow
exit Function
end if
select case txncode
case "210"
if (Cashin > "0" and Cashin < "1000") then txncode = "210-1000"
'msgbox txncode
elseif ("1000" < Cashin and Cashin < "5000") then txncode = "210-1000-5000"
elseif (Cashin > "5000") then txncode = "210-5000"
else txncode = "210"
end if
msgbox txncode
Main = DTSTransformStat_OK
exit function
case else
Main = DTSTransformStat_OK
exit function
end select
DTSDestination("TransactionCode") = txncode
Main = DTSTransformStat_OK
End Function
View 5 Replies
View Related
Oct 4, 2004
I am trying to use a DTS package to get data from db2 in a s390 environment. I am able to use the Import task and then run a query on db2, save the package and execute the package.But when i try edit the transform task i get a mmc.ese application error...it says that the instruction at addres "" tries referencing memory at address "". The memory could not be read...
I installed a ibm odbc driver on my client...obviously the connection seem to work since the package executes...But then the edit issue...
If any one faced this problem or know what i am doing wrong....appreciate ur time and effort...
Thanks
View 1 Replies
View Related
Mar 3, 2004
I'm getting this error in a simple DTS package.
No query specification returned by transform status.
Any ideas what's causing this ?
DTS is simply running a query (which returns data via preview)
and insert results into a table.
Thanks
Mark
View 1 Replies
View Related
Dec 20, 2007
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies
View Related
Dec 21, 2005
I have an Access 2.0 database that holds call data on a mapped drive. I am running MS SQL Server 2000. I can open it and view the records inside. I can even run the query below and get results, if I removed the CallDate and CallTime parameters.
SELECT CallDate, CallTime, Mid(CallRecordData, 68, 3) AS Extension, 'I' AS Direction, Mid(CallRecordData, 34, 11) AS Called,
Val(Mid(CallRecordData, 18, 2)) + Val(Mid(CallRecordData, 21, 2))/ 60 AS Minutes, Val(Mid(CallRecordData, 21, 2)) AS Seconds
FROM CallRecords
WHERE (CallDate = ?) AND (CallTime >= ?) AND (CallTime < ?) AND (Mid(CallRecordData, 30, 1) <> '9')
When I preview in the Transform Data Task, I get:
Package Error
Error Source: Microsoft JET Database Engine
Error Description: No value given for one or more required parameters.
When I look at the parameters, they are listed. I check their values, and they have the appropriate values (DateCalled, String, 07/14/2005) (StartTime, String, 06:30) (EndTime, String, 07:00)
When I run it in the build query or in Access with a linked table to the source, I can enter the values when asked for them and it works.
Thanks for any help you can provide.
View 2 Replies
View Related
Nov 14, 2007
Hi All, We are using SQL2000 servers with transact replication to a warmstand-by server. We are seeing the following error from the Log readeragents.Does anyone have any insight on this error?The process could not execute 'sp_MSadd_repl_commands27hp'TIA Scott B.
View 3 Replies
View Related
May 16, 2007
hi all,
good day!
i have dataflowtask_a and dataflowtask_b
i also have a send mail task
inside dtf_a i have a very long transformation which has 10 lookup task
each lookup task is configured to have an error output. should every lookup
encountered an error, the error output of the
lookup sends a unique error msg per lookup and is appended to a
string variable errorlst. Should dtf-a encounter an error it sets the variable
@nogo=true.
In the control flow if @nogo=false it proceeds to dtf_b otherwise it proceeds to
sendmail the consolidate error message.
Questions:
1. I only want to have one unique error message sent per lookup. if there are two
lookup error it should send only one message
2. the message should look like this: "error lookup1 : error lookup2 :and so soon"
how can i do this
thanks!
joey
.
View 2 Replies
View Related
Jun 21, 2006
Hi,
I'm using a Lookup object, but it dosn't works. Anybody knows this error?
[Lookup [29018]] Error: Row yielded no match during lookup.
[Lookup [29018]] Error: The "component "Lookup" (29018)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (29020)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (29018) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
View 3 Replies
View Related
May 16, 2006
I am trying to run a SSIS package that contains a fuzzy lookup. I am using a flat file with about 7 million records as the input. The reference table has about 2000 records. The package fails after about 40,000 records with the following information:
------------------------
Warning: 0x8007000E at Data Flow Task, Fuzzy Lookup [228]: Not enough storage is available to complete this operation.
Warning: 0x800470E9 at Data Flow Task, DTS.Pipeline: A call to the ProcessInput method for input 229 on component "Fuzzy Lookup" (228) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 2 before the call, and 1 after the call returned.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Fuzzy Lookup" (228) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x8007000E.
Error: 0xC02020C4 at Data Flow Task, Flat File Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
-------------------------------
I have tried many things - changing the BufferTempStoragePath path to a drive that has plenty space, changed the MaxInsertCommitSize to 5,000...
What else can I do?
Thanks!
View 10 Replies
View Related
Oct 18, 2006
Hi
I get the following error when I use Fuzzy Lookup in a Data Flow task with TransactionOption property set to €œRequired€?
[Fuzzy Lookup [61]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot create new connection because in manual or distributed transaction mode.".
When I Change the TransactionProperty to €œSupported€? it works fine.
I need the property set to Required for it does an undo in the event of a failure.
Any ideas on how to get the Fuzzy Lookup to work
View 3 Replies
View Related
