Error In Reading Float Data
Mar 20, 2006
I am using SQL Server 2000, VS 2003
I have Education table in which there is a field CGPA having float data type (null allowed) I retreive the data from SQL server using stroed proc and store it in SqlDataReader dr while reading if CGPA contains 0 then it raises an error that "Specified cast is not valid" other wise it does not raise any error.
while (dr.Read())
{
Education e = new Education();
e.EducationId = dr.GetInt32(0);
e.Country = dr.GetInt32(1);
e.InstitutionName = dr.GetString(2);
e.Grade = dr.GetString(3);
e.CGPA = dr.GetFloat(4); // ERROR HERE
e.Percentage = dr.GetFloat(5);
e.PassingYear = dr.GetString(6);
}
where as in Education CGPA is also the float property can any one tell me how to read 0 value of float from SQL server
View 3 Replies
ADVERTISEMENT
Oct 17, 2007
Error converting data type varchar to float.
I am getting this error. Any one there to guide me
View 4 Replies
View Related
Mar 25, 2008
hello anyone... i got this message "Error converting data type varchar to float" when i was trying to insert values into table using instead of trigger...
below is my table ClimateData
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[ClimateData] Script Date: 03/26/2008 03:04:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[ClimateData] WITH CHECK ADD CONSTRAINT [FK_ClimateData_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below is photovoltaic table
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[Photovoltaic] Script Date: 03/26/2008 03:06:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_OrganizationDetail] FOREIGN KEY([Org_application_id])
REFERENCES [dbo].[OrganizationDetail] ([Org_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_Users] FOREIGN KEY([User_application_id])
REFERENCES [dbo].[Users] ([User_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below also my command for instead of trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Organization Detail already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Organization Types already in the table ***/
END -- trigger def
and finally, i hav tried using this command to insert into table v_PhotovoltaicClimateData.. this is the command to insert
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44, 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
and i got this error...
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
so anyone... plzz help me...
View 19 Replies
View Related
Mar 28, 2008
Hello everyone... i have some problem with instead of trigger... after insert values into v_PhotovoltaicClimateData, i got this error, Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
below is my DDL for Photovoltaic table
quote:CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
Below is my DDL for ClimateData table
quote:CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
below is my v_PhotovoltaicClimateData
quote:CREATE VIEW [dbo].[v_PhotovoltaicClimateData]
AS
SELECT dbo.Photovoltaic.PV_site, dbo.Photovoltaic.PV_state, dbo.Photovoltaic.PV_type_of_system, dbo.Photovoltaic.PV_nominal_power,
dbo.Photovoltaic.PV_module, dbo.Photovoltaic.PV_mounting, dbo.ClimateData.Latitude, dbo.ClimateData.Longitude, dbo.ClimateData.Altitude,
dbo.ClimateData.Climate_type
FROM dbo.ClimateData INNER JOIN
dbo.Photovoltaic ON dbo.ClimateData.PV_application_id = dbo.Photovoltaic.PV_application_id
below is my instead of trigger command...
quote:CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Photovoltaic already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Climate Data already in the table ***/
END -- trigger def
this is my commad insert values using instead of trigger that i've created...
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44 , 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
after execute this commad, i got this error..
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
what should i do??? anyone help me.
View 3 Replies
View Related
Jul 23, 2005
I have created a stored procedure that contain this field (below) inorder to meet certain criteria. But my problem is when I try to runthe stored procedure I encounter an error "Error converting data typevarchar to float".CASE Final WHEN 0 THEN '--' ELSE Final END AS FinalGradeThe Final field is a float data type.Could anyone teach me how to fix this problem?
View 1 Replies
View Related
Sep 24, 2015
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal
,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat
FROM QA
WHERE QA_AutoID in (
SELECT TOP 1 QA_AutoID
FROM QA
WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1
)
--AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0)
ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
View 13 Replies
View Related
Jun 11, 2014
So I have two tables with similar columns etc, unfortunately the Insert to the History table fails. Noto sure how to format.
Source Table.
CREATE TABLE [dbo].[SKUCURRENT](
[UID] [int] IDENTITY(1,1) NOT NULL,
[SKU] [nvarchar](100) NOT NULL,
[WHSELOC] [nvarchar](50) NOT NULL,
[WEIGHT] [nvarchar](50) NOT NULL,
[Code] ....
View 1 Replies
View Related
Mar 6, 2006
Can anyone tell me what the heck this is trying to tell me. I have 3 datasets I'm working with so there are errors for each here:
[rsMissingFieldInDataSet] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. The data extension returned an error during reading the field.
Preview complete -- 0 errors, 4 warnings
View 7 Replies
View Related
Apr 9, 2007
I can't take full credit for this. I want to share this with Jeff Moden who did the important research for this calculation here.
All I did was just adapting some old code according to the mantissa finding Jeff made and optimized it a little
Some test codeDECLARE@SomeNumber FLOAT,
@BinFloat BINARY(8)
SELECT@SomeNumber = -185.6125,
@BinFloat = CAST(@SomeNumber AS BINARY(8))
SELECT@SomeNumber AS [Original],
CAST(@SomeNumber AS BINARY(8)) AS [Binary],
dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Converted],
@SomeNumber - dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Error]
And here is the code for the function.CREATE FUNCTION dbo.fnBinaryFloat2Float
(
@BinaryFloat BINARY(8)
)
RETURNS FLOAT
AS
BEGIN
DECLARE@Part TINYINT,
@PartValue TINYINT,
@Mask TINYINT,
@Mantissa FLOAT,
@Exponent SMALLINT,
@Bit TINYINT,
@Ln2 FLOAT,
@BigValue BIGINT
SELECT@Part = 1,
@Mantissa = 1,
@Bit = 1,
@Ln2 = LOG(2),
@BigValue = CAST(@BinaryFloat AS BIGINT),
@Exponent = (@BigValue & 0x7ff0000000000000) / EXP(52 * @Ln2)
WHILE @Part <= 8
BEGIN
SELECT@Part = @Part + 1,
@PartValue = CAST(SUBSTRING(@BinaryFloat, @Part, 1) AS TINYINT),
@Mask =CASE WHEN @Part = 2 THEN 8 ELSE 128 END
WHILE @Mask > 0
BEGIN
IF @PartValue & @Mask > 0
SET @Mantissa = @Mantissa + EXP(-@Bit * @Ln2)
SELECT@Bit = @Bit + 1,
@Mask = @Mask / 2
END
END
RETURNSIGN(@BigValue) * @Mantissa * POWER(CAST(2 AS FLOAT), @Exponent - 1023)
END
Thanks again Jeff!
Peter Larsson
Helsingborg, Sweden
View 3 Replies
View Related
Jul 11, 2002
Declare @FLine varchar(8000)
Declare @FFloat float(8)
value of @FLine =7 Dir(s) 1,023,817,728 bytes free
select @FLine = rtrim(ltrim((select textline from BCPDiskSpaceTempTable where charindex('bytes free', textline) > 0)))
But I get error saying Error Converting Varchar to Float in the above line can anyone tell me why it is so
View 1 Replies
View Related
Jan 23, 2002
I'm running the following statement...
The column is currently float (8). Need to convert to numeric. I've tried cast, convert. no go for either.
Any help on this would be greatly appreciated.
..... select ... convert(numeric(38,0), colname)
TIA,
Jeremy
View 1 Replies
View Related
Nov 8, 2007
Hi There,
I am trying to export a SQL table containing Float Fields to a CSV file. Since its a batch process with 200 tables, I am using BCP to automate the process.
The Problem:
All other fields export fine except the fields with 'Float' values. When I open the CSV, few of the float values show a rounding error.
eg. if the value in SQL table is 0.29 the CSV file has the corresponding value as 0.2899999999....
Few float values are exporting fine, but most of them give the recurring '9's at the end - for no reason. I've tried to find the cause why it happens in few places and not in others, I did not see any similarity.
Can anyone post a solution for this?
Thank you.
p.s: pls do not suggest me to use SSIS for this.
View 5 Replies
View Related
Oct 17, 2001
I am using SQL Server 7.0. I create a table with one field..type of float.
Using SQL Server Query Analyzer:
INSERT INTO MyTable(MyField) VALUES (4.9)
INSERT INTO MyTable(MyField) VALUES (Round(4.9,2))
SELECT * FROM MyTable
Result = 4.9000000000000004
This is a basic example of a problem I am having in another table with the
same float field that I am using to store money in. I don't want to use
the money field as the BDE from Borland has some issues with money fields.
Any suggestions? Thanks in advance.
View 1 Replies
View Related
Oct 27, 2000
We are using a GL package called Solomon. It uses SQL Server 7.0 for it's database. I want to create a data warehouse using this data as the source. The package uses the float data type for dollar amounts. The dollar amounts in the data have either no numbers, 1 number, or 2 numbers after the decimal point. Is the float data type the best one to use in my data warehouse for dollars and cents, or should I try using the monetary or decimal (precision 2) data type? Which type uses the most storage?
View 2 Replies
View Related
Mar 2, 2005
I've got a float data type in a table. I imported data from a csv file. One value was 0.5195, but when I use the value in a calculation or select it using the Query Analyser, I'm getting a value of 0.51949999999999996. Is there any way around this, it's a real pain?
Thanks in advance.
View 1 Replies
View Related
Mar 8, 2004
Hi all,
I have declared a field with datatype as float.
When I enter value with two precision it chooses to round off to lower value and insert into the database.
I am losing precision in this case.
I want to insert 4.56. It inserts the way shown and hence all my further calculations go haywire.
Is SQL server designed to store float like this or Am I doing soemting wrong ???
Please advise...
4.56 (Inserted)
4.5599999999999996 (Stored)
View 1 Replies
View Related
Apr 4, 2008
Hai...
Hopefully ur guys can help me. I declare data type as float in price table. So the problem here is, whenever i enter a float number and move to the second row to enter a new number. The first number in the first row will automatically change to integer, without no reason. For example "2.3" will become "25".
Is there any configuration that need to do.
View 8 Replies
View Related
Feb 16, 2006
1. In c++ (or any other language) I'm copying bit by bit to a doublevariable dob_var.2. If I copy dob_var to dob_var2 which is also a double I do not loseinformation.3. This implies that the same would be when copying to a data base, butwhen I write dob_var to an sql server float field (same size as adouble variable = 64 bit) it sometimes loses information. e.g. whenvalue=1E-320.It is true that SQL float is valid until 1E-308 but so is a C++ double.Any comments?
View 2 Replies
View Related
Jan 7, 2008
For example load 0.15 from Excel to varchar field in database and get 14.99999, why?
How just get 0.15 in varchar field?
View 7 Replies
View Related
Sep 27, 2007
Hello,
I am connecting to MSSQL through ODBC using regular SQL commands (SQLAllocHandle, SQLConnect, SQLFetch). Sometimes when I retrieve float data from the server it gets corrupted. For instance, instead of 59.457443 I will actually get 59.45744299999998. The value that is stored in the database is 59.457443 and it is stored as a float. The code I use to retrieve the data worked OK with an Access database, the problem only appeared after switching to MSSQL. Does anybody know if it's a configuration issue? Any help would be greatly appreciated.
EoF
View 9 Replies
View Related
Jan 10, 2008
Hi All,
Am I missing something or is there something odd with float data types. i know that float is not the most precise definition but i came across something really odd today.
first let me define the scenario.
this is sql server 2005, standard edition build 3042.
I have a table defined as
CREATE TABLE [dbo].[ASSET](
[Property_Num] [numeric](10, 0) NOT NULL,
[Accrual_Factor_Val] [float] NULL
)
the accrual_factor_val was updated to a value of 0.00005 then the web service failed because the proc returned 5E-05!
i opened the table, and discovered this is the stored value. is this correct?
thoughts and ideas?
thanks for your input!
View 5 Replies
View Related
May 3, 2007
Hi I have written a piece of code for Login form which reads the user id and password from db. It works fine with the Sql server 2000 but I get a error with Sql server 2005. SqlConnection conn = new SqlConnection("Data Source=D\SQLEXPRESS;Initial Catalog=model;Integrated Security=True"); SqlCommand cmd = new SqlCommand("Select * from JsLoginDetails", conn); conn.Open(); SqlDataReader dr = cmd.ExecuteReader(); while (dr.Read()) { if ((Login1.UserName == dr.GetValue(0).ToString()) && Login1.Password == dr.GetValue(1).ToString()) { Response.Redirect("MainJs.aspx"); } else { Login1.FailureText = "Invalid Userid Or Password"; } } dr.Dispose(); conn.Close(); } I get and error Invalid object name 'JsLoginDetails'. pls help thnksdiv
View 1 Replies
View Related
May 8, 2008
Hello,
I have a simple question. Is it at all possible to replace columns which has nulls with blank spaces for a float data type column.
The columns has null values( written)) in it in some rows and has numbers in other rows . I want to remove nulls before copying it to another file.
Thanks
View 7 Replies
View Related
Feb 13, 2008
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
View 4 Replies
View Related
May 22, 2006
when a statement fails and it tell me for example
Server: Msg 137, Level 15, State 2, Procedure spinsertnew, Line 266
Must declare the variable '@'.
How can I find which line it is using query manager?
View 13 Replies
View Related
May 4, 2006
I keep receiving errors while using variables to pass values to different part of my package. For example ...
Error: 2006-05-04 10:31:59.84
Code: 0xC00470EA
Source: EdwPostProcess
Description: Reading the variable "User::GvPathRoot" failed with error code 0xC0010009.
End Error
The way my variables are constructed is :
First the global variables (Gv*) are set by the parent package;
Then local variables (Lv*) are set using the EvaluateAsExpression property and giving it an expression that takes the Gv* variable and concatenate a string to it.
At execution time, while the expressions are resolved, I get the above error while it was resolved correctly in a previous task.
I tried different method including duplicating my variables but without success. I'm running out of ideas
Gilles
View 4 Replies
View Related
May 5, 2008
While pulling data from a progress 10.1B Database, we get the following error (datasource). How do we go about redirectign the erroneous row into a flat file / database so that we can isolate the issue?
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
View 3 Replies
View Related
Sep 10, 2007
Hi,
I have a excel file which i want to import the data to sql server... The sql server Data type for that particular column is
varchar and it has a contraint too like the data should be in this fashion 00000-0000 or 00000...
but when i try to import the data from the excel to sql server... 08545 just becomes 8545 (cause excel is treating it as a float) and so my insert fails...
what can i do to rectify the problem...
regards
Karen
View 8 Replies
View Related
Jun 19, 2007
Hello,
I have a problem with the round of SQL Server 2K on the float data type.
In my application I do a SQL request for find a row in a table of SQL Server 2K.
This is the request :
SELECT DISTINCT N_ROW_ID FROM COMM WHERE N_ARTICLE_ID=79510 AND N_DATASOURCE_ID=1 AND N_SOURCE_ID=-102 AND N_PROVIDER_ID=-100
AND N_LEAD_TIME IS NULL AND N_UNIT_PRICE = 329.78 AND N_UNIT_PRICE_CURRENCY_ID=1
N_UNIT_PRICE is a float data type.
In the line need, the field N_UNIT_PRICE has 329.78 but with the round of SQL Server 2K I have 329.779999999999997.
So I never find the row
Do you have a solution for comparate a float flied with SQL Server round and a float send in a request as my 329.78?
I can't transform the column in decimal or numeric data type.
Is it possible to Disable the function?
Regards
View 2 Replies
View Related
Jul 6, 2005
I posted this in the Windows Forms Data Binding section, and they directed me to the .Net data section. I posted it there and waited a week with no replies. I'm hoping someone here can at least give me an idea of what the problem might be.
View 1 Replies
View Related
Feb 4, 2005
I have a report that is based on a query that is read from a .sql file and is executed in the stored procedure. I found this code on the internet. When I run the SP in Query Analyser it tells me that "2 rows have been affected". I don't know why I don't get the data. Any help??
Stored procedure:
CREATE PROCEDURE TimeTracker_Report_ClientNumbers2
AS
DECLARE @SQLQuery as NVARCHAR(4000)
BEGIN
CREATE TABLE #tmpQuery (Query NVARCHAR(4000))
BULK INSERT #tmpQuery FROM '\servernameQueriesReport_ClientNumbers.sql'
SELECT @SQLQuery = Query FROM #TMPQUERY
EXECUTE sp_executesql @SQLQuery
END
GO
and Report_ClientNumbers.sql contains the following query:
SELECT Name, ClientNumber FROM Companies WHERE Not ClientNumber IS NULL ORDER BY ClientNumber
View 1 Replies
View Related
Jul 20, 2000
I added a field to an exisiting table (CHAR 30), and I added to field to the BCP Format File.
The BCP worked fine before the new field, and still works fine when I exclude the new field
from the format file, but with the new field I receive the following error:
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]I/O error while reading BCP format file
(2 row(s) affected)
Here is a copy of my format file:
7.0
11
1 SQLCHAR 0 6 "" 1 Empl_ser_no
2 SQLCHAR 0 2 "" 2 Empl_stat_cd
3 SQLCHAR 0 1 "" 3 Guest_type_fl
4 SQLCHAR 0 30 "" 4 Job_tl
5 SQLCHAR 0 14 "" 5 Pager_no
6 SQLCHAR 0 1 "" 6 Security_Clear_fl
7 SQLCHAR 0 9 "" 7 SSN
8 SQLCHAR 0 30 "" 8 Emer_cont_nm
9 SQLCHAR 0 14 "" 9 Emer_cont_no
10 SQLCHAR 0 1 "" 10 Citizen_fl
11 SQLCHAR 0 30 "
" 11 Job_Res
The input file is just a fixed positonal text file, and I have checkid it 100 times- it is fine.
Any sugestions from any BCP gurus out there? THANKS
View 1 Replies
View Related
Oct 6, 2004
Hi, am trying to analyze output of profiler
I execute sp_sp_alex
Profiler results
CPU = 108
READ = 0
WRITE = 109
DURATION = 1709
code from sp_alex
step 1
read data from table A into cursor
(500 rows)
step 2
fetch cursor and if values in cursor do not exixts in table B(has 1000000 rows) then insert cursor data into table B
How I undestand result provided by profiler
CPU = 108 good or bad ?
READ = 0 good ,took no time read data ,all indexes in place
WRITE = 109 mmm.... something really wrong with writing to disks , why it took so long to insert 500 records
DURATION = 1709 good or bad ?
How would you read profiler results ?
Thank you
Alex
View 1 Replies
View Related
