I have transactional Replication from A to B.
My distribution agent failed becos of a primary key violation error in a table.[i have not included the skip error option].
Then the replication stopped.
The transactions on other tables are also not replicated to B.
IF an error is encountered in one of the tables will the replication stop entirely??.Is there no way for the replication to continue for the rest of the tables..
Pls clarify
When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:
SQL Server Internal Error. Text manager cannot continue with current statement.
The server is running SQL Server 2000 with SP4.
I am really concerned because this is a production sever and there are over 300 users access concurrently.
Please help me to find a solution.
Thanks,
Roshan.
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies View RelatedHow can I cause my insert statement to skip over (without failing) rowswhere there's a primary key constraint violation?I've got a case where daily I insert >500k rows of daily data, wherethe data is date and time stamped. So, for example, I have an insertstatement with constraint: WHERE date >= '5/20/05' AND date <'5/21/05'. That takes care of one day's data (5/20).However, the next day's data (5/21) will still have some time stampsfrom the previous day. Therefore the statement needs to be somethinglike WHERE date >= '5/20/05' AND date <= '5/21/05'. The 5/20 data isalready loaded but I need to take the 5/21 data which just happens tocontain just a few rows of data marked 5/20 and insert it withoutgenerating a primary key error from all the other 5/20 rows that arealready inserted.-Dave
View 7 Replies View RelatedI have an SSIS package that uses a for each loop to send an order confirmation e-mail. If it does not find an email I need the package to continue after the failure path. The package stops after the failure, but I need it to continue with the next iteration of the for each loop. How can I do this?
View 4 Replies View RelatedI have a sql statement which runs through a reference table to drop columns no longer needed. It works, however if it tries to delete a column that does not exist, it errors out. Is there a way to continue if this error appears(I have the set error routine set up) The question is can I tell it if it is this error to go on, and is "continue" the
right syntax? Below is statement
open dbcursor
fetch next from dbcursor into @tbname,@fldname,@recid
while (@@FETCH_STATUS <> -1)
begin
--set @tbname = 'IMMUNIZATION_MAST_'
--set @fldname = 'cb_other'
set @sql = 'alter table ' + ltrim(@tbname)
set @sql3= ' drop column ' + ltrim(@fldname)
exec(@sql + @sql3)
select @error = @@error
if @error = 5924
begin
CONTINUE?
end
print @error
Hi!
Imagine this SQL statement:
Code SnippetINSERT INTO B SELECT * FROM A
If one of the insert fails ... don't continue, the statement fail. For example if any field in A violate a constraint in B, the statement fails.
I want that the statement continue if errors occurs, if i lost a number of rows don't matter ... but if i can save or log this row will be great too !!
Is posible? Any way to do it?
Regards.
I have a looped query querying linked servers. When it cannot connect to a server, it errors out.
Error Message;
Server: Msg 6, Level 16, State 1, Line 2
Specified SQL server not found.
How can I handle this error message and continue the query?
We have a package that loads the data from several excel files into database in a forloop.
Everything works files until the package hits the bad file.
My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.
How can force the for loop to continue when there is an error?
Is there any way to reset the errors?
Thanks
R
How can we continue with the rest of the iterations in ForEach Loop after handle an error.
I Have a dataflow task inside a for-each loop and processing a set of flat files in that. When error occurs in the dataflow task, i moved that particular flat file to another location. But, If an error occurs at first falt file, It moves that flat file to the location i specified and not continue with the next file (The Execution finished at that stage itself afetr the first flat file).
I Set the FailParentonFailue of Dataflow task to TRUE (Since its inside the for loop).
Any thing i have to change ? Or Where i miss the thing.
Hi
I have a CSV file which sometimes contains the odd CSV error, for this reason the odd row throws an error.
If I have a clean CSV file my SSIS package works great, but I am having problems getting the package to continue past the rows in the file that throw errors.
How do I :
Get the package to continue on error, I have tried playing with the Propagate Variable with no joy
Add an Error event, which will capture the error and log it to a SQL table or File Destination?
Any help will be great!
Thank you
I have an SSIS package where I have directed the error output to a Flat File Destination. The issue is that there are some bad entried in a set of log files, where the source file reads on more delimited column than there are actual columns. (As in there are 26 column headers, and one row will have 27 commas, or delimiters.) I am trying to redirect the row output to put the bad rows into a Flat File for debugging purposes. Although, the package is not able to continue past the error. As soon as it hits the bad row, it fails despite the error output.
Any ideas?
Hi There,
If an update in a stored procedure fails/errors (as in (a) below) the procedure will not continue with (b) - I need the code in (b) to run despite whether the previous update was successful or not - Any ideas?
(a) if(@Data2 = 6)
begin
update
SCHEDULE
set
Start_CallBack = getdate()
where
(Block = @Block)
end
(b) WHILE @Block_Count > 0
BEGIN
UPDATE BLOCK SET Status = @Block_Status
END
Any help will be greatly appreciated :)
Hi,
does anybody know this error code? I get that error from a jdbc-connection ocasionally but can't find an explanation. The original message is in German. The number should be ok. The error occures when a transaction is aborted, the jdbc-connection is lost.
'Der Server konnte die Transaktion nicht fortsetzen. Beschreibung: 60000000b8'
Please help,
Many thanks
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
Hello everyone,
I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.
My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.
- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".
Problem:
This configuration gives me only the first erroneous column in the row being processed.
Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.
Thanks in advance...
Samar
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedHello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedHi all,
I need a bit of assistance with a piece of code I have written. I keep receiving a Syntax error "Incorrect syntax near END". The procedure is ~1000 line of code so I have just cut and paste the "problem" sql here and attached the full code to this message to see if anyone can help me out. Cheers :beer:
-- BEGIN CODE
IF @NoOfChildren > 0
BEGIN
DECLARE @childNo AS INTEGER
DECLARE @SQL AS VARCHAR(8000)
SET @childNo = 1
WHILE @childNo != @NoOfChildren
BEGIN
-- Perform Dynamic SQL check for children
SET @SQL = 'IF @strChild'+ @childNo + 'Surname IS NOT NULL
BEGIN
SET @asciicounter = 1
SET @asciifound = 0
WHILE @asciicounter != 255
BEGIN
IF CHARINDEX(char(@asciicounter),@strChild'+ @childNo +'Surname) != 0
BEGIN
IF @asciicounter NOT IN (32,45,46)
BEGIN
SET @asciifound = 1
END
END
SET @asciicounter = @asciicounter + 1
CONTINUE
END
IF @asciifound = 1
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''45'''',''
END
END'
EXECUTE @SQL
SET @SQL = ''
-- Perform Dynamic SQL check for Forename
SET @SQL = 'IF @strChild'+ @childNo + 'Forename IS NOT NULL
BEGIN
SET @asciicounter = 1
SET @asciifound = 0
WHILE @asciicounter != 255
BEGIN
IF CHARINDEX(char(@asciicounter),@strChild'+ @childNo +'Forename) != 0
BEGIN
IF @asciicounter NOT IN (32,45,46)
BEGIN
SET @asciifound = 1
END
END
SET @asciicounter = @asciicounter + 1
CONTINUE
END
IF @asciifound = 1
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''46'''',''
END
END'
EXECUTE @SQL
SET @SQL = ''
-- Perform Dynamic SQL check on DOB
SET @SQL = 'IF @dtChild'+@childNo+'Dob IS NULL
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''047'',''
END
IF ISDATE(@dtChild'+@childNo+'Dob) = 0
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''048'',''
END
IF DATEDIFF(YEAR, @dtChild'+@childNo+'Dob, GETDATE()) NOT BETWEEN 0 AND 18
BEGIN
IF DATEDIFF(YEAR, @dtChild'+@childNo+'Dob, GETDATE()) > 18
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''049'',''
END
ELSE
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''050'',''
END'
EXECUTE @SQL
SET @SQL = ''
-- Perform dynamic SQL check on Gender
SET @SQL = 'IF @blnChild'+@childNo+'Gender IS NULL
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''051'',''
END'
EXECUTE @SQL
SET @childNo = @childNo + 1
CONTINUE
END
-- END CODE
Will using continue cause an infinite loop in a cursor or will the cursor know to go to the next record?
Begin Tran
exec @rtn = spDoSomething
select @err = @@error
If @err <> 0
Begin
rollback
continue
End
Commit Tran
In my package i have to loop through files and load the data from files into a table.
but if a file has error i need to move it to a folder like errored and continue execution with other files.
I am running a .sql file containing a large number of delete and insert statements, using isql from the command line. After 2 minutes I get a message "Insufficient memory to continue", same statements if I cut and paste in SQL server query analyzer I do not get this message. On looking at the
task manager, it shows a lot of available memory.
Any clues
Thanks in advance
I have a for loop I have several tasks inside. I would like to "continue" with a new iteration if any of the tasks in the loop error or fail. Is this possible and if so -- how?
View 5 Replies View RelatedI get this error in my Agent after starten to synchronise.
I see the access mdb been created and then deleted and renamed to
name_old.mdb
Do you have some help?
Richard
I get the message when loading the bcp. I check the path variable and the sqlserver BINN directory is there, but twice. If I try opening the command window and write bcp, I get the error, if I enter the whole path c:...80 oolinncp there is no problem. I wonder what could it be?
I've manually reinstalled many times but still having trouble.
Thanx in advance
SQL SERVER 2000 or SQL SERVER 7 (I've tried with both)
WINDOWS XP
I have scheduled a SSIS package to run repeatedly by creating a scheduled SQL job that runs every minute . After every hour the packgae fails with the following error
Description: System.OutOfMemoryException: Insufficient memory to continue the execution of the program. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90.get_Value() at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent() End Erro
The strange thing is that if i right click on SQL JOb and run it...it works fine.
Did anyone encounter similar problem or know the solution of the above problem ?
Thanks....
I have 50GB datafile (.mdf) and have 650 mb lift on the hard drive. I have another drive (on the same box) which has about 30 GB left.
My question is can i create a .ndf file in that 30GB drive and continue the database growth on the new .ndf file with out any furthur growth on the .mdf file? please help!
Thanks in advance!
THE LADDERS (The Most $100k+ Jobs.)
www.TheLadders.com
Do you have to set the Error Output on DF components to "Fail Component" in order to get the errors?
What I would LIKE to do is a combination of "Ignore Failure" and "Fail Component". You see, I am using the Logging feature in my package that creates the sysdtslog90 table in the SQL database. The errors that I am logging make sense and have enough information for my purposes.
The problem is that I would like to continue processing the data and not have it stop when a data error occurs. I REALLY do not want to Redirect Rows unless it is necessary for me to do what I am asking.
Using Ignore Failure on both the source text file and destination SQL table allows the "good" data to be inserted, but I cannot get any info on the columns in error. Conversely, if I choose to Fail component, I get the info on the columns in error, but only the data that was inserted before the error was encountered is inserted into the table.
Suggestions?
With a ForEach container, configured to loop through files in a
directory, if I have a problem with a file.. can I direct the loop to
skip on to the next file?
I'm processing structured files, first record of each is some
header info, body records are in the middle, and then the last record
is a trailer containg a checksum
So, for each file in the directory, I split the records into three raw
files, one for header rec(s) , one for body recs and one for trailer
recs. (based on line numbers and using a conditional split to direct
the records)
Then I start by processing the header recs in a dataflow.. if all goes
well there I move on to the next dataflow to process the body recs from
the DataRecs raw file.. etc...
I would like to do some validation at each processing step.. if a
header rec fails validation say... then I'd like to just stop
processing that file and move onto the next file...
Now, I don't see my validation throwing an exception... so its more
that I'd decide (maybe using an Audit ) that the header doesn't pass
validation.. then I'd like to put a record in an error table (with info
about filename, source etc, not just content of the current data row)
But not sure what approach to take on this...
If there is an appropriate section in BOL please point me at it...
Thanks
PJ
Hi guys,
I have some triggers that insert data in a table located in a remote server. If the remote server happens to be down I want to continue with the original transaction anyway. Can I use a BENGIN TRY BEGIN CATCH block to continue with the transaction in the trigger and also insert the data into a temporal local table if the remote insert fails?
Regards
Hello,
In my SSIS package I am trying to import a .csv flat file with about 170,000 rows of data with 75 columns (I know this is rather large). I would like to create a SSIS package that loads ALL of the rows of data into a table. This table has it's fields defined (such as money, float, varchar, datetime, etc). I want the data to load to this table even if there is a conversion error converting any field. When the data is loaded to this table, any fields that couldn't be converted should be set to null. Of the 75 columns of data, there are MANY columns that could be invalid.
For example, if the flat file contains the value "00/00/00" for my "PaidDate" field, I would want all of the other fields to be populated and the value for this particular record's "PaidDate" field to be null.
It would also be nice if I could trap any of the fields that caused a problem and log them along with the row.
I know that SSIS supports the "Redirect Row" method for handling data, but in my case, I don't want to redirect it. I want to continue to load it, just with a null value.
Is there an easy way of doing this (i.e. perhaps by using the Advanced Editor for the Flat File Source and setting something in the Input/Output columns)? I really don't want to create a Derived Column or Data Conversion transformation for every field that needs to be converted (b/c there are 75 columns to maintain this for).
I know if I import this file to an Access 2003 database, it imports the data fine and logs any conversion errors to an "_ConversionErrors" table. I am basically looking for this same behavior in SSIS, without having to maintain 75 columns.
TIA
Hi,
How can avoid SQL to rollback the transaction after an insert fails?. I would like to keep the sucessfully inserted rows and continue with next ones after a single one has failed, and then report the ones that failed.
NOT ATOMIC CONTINUE ON SQLEXCEPTION??
Sorry for such a lame question
Regards,
Hi,
On the last Sunday 26/12/04 on 20:00 I got on one of our applications in the customer site this error:
"There is insufficient system memory to run this query."
Details:
Computer: IBM XSERIES_345, dual CPU 2.8 Intel xeo, 1,047,952 KB ram, windows 2000 server sp4.
Disk space: 4395 MB, Virtual memory: initial size 1536 MB, Max size 3072 MB. Registry size: current 14 MB, Max 90 MB.
SQL Server 2000 SP 3, two production databases (1) Data size 100 MB, log size 15 MB (2) Data size 500 MB, log size 125 MB
All the memory options are configured as default i.e. dynamically configure for memory and not changes in any sp_configure options.
SQL server is the only major application running on the machine.
Facts:
On that evening the I've checked the Task Manager and found that SQL Server use 500 MB in Mem Usage and 1200 MB in VM size.
In the query analyzer I execute the select query which results the "…insufficient system memory…" error on both databases and on the one with more data it failed with this error, but on the other database it completed successfully.
I restart SQL Server service to solve it, and as for today 28/12/04 at 08:00 it use 590 MB in Mem Usage and 590 MB in VM size.
I have checked the system with Performance monitor and didn't find any problems I use the Memory: Pages/sec, Memory: Available Bytes, Physical Disk: % Disk Time, Processor: % Processor Time, SQL Server Buffer: Buffer Cache Hit Ratio.
We have 8 user connections for one of the database and 16 for the other one.
Our system runs with this configuration for 2 months, I backup the databases FULL, DIFF and LOG backup.
It's not real time system, and the load on the SQL is medium, but we use bad queries as update for all fields in one query (please don't ask…)
I know that SQL server is greedy with the memory and released memory only if other process needs it.
Any ideas why it happens?
Thanks,
Yaniv