Error In SQL Server 2005 CLR Assembly
Jan 19, 2007
In the past we've days we've had an assembly that had worked previously which now fails with the error:
Failed to open malformed assembly 'System.Data' with HRESULT 0x80070008.
There have been no changes to the .NET framework at the server level, all other assemblies on the server continue to function and the assemly does work when deployed to another server. The assembly has been recreeated from scratch yet the error persisted. In another attempt to narrow down the cause we moved the system.data.dll to another server in an attempt to see if the particular DLL was the issue, however the other server had no issues.
I'm assuming that the error we're getting has some cause other than with System.Data.dll.Does anyone have any ideas what could be causing this or how to proceed in troubleshooting this issue?
Thanks
Bill
View 4 Replies
ADVERTISEMENT
Feb 22, 2008
I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
· The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
· The signatures of methods in the assembly that are called from other assemblies.
· The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
· The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
· The FillRow method name attribute for CLR table-valued functions.
· The Accumulate and Terminate method signature for user-defined aggregates.
· System assemblies.
· Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
· Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
· Adding new public methods.
· Modifying private methods in any way.
But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.
View 9 Replies
View Related
Mar 8, 2007
I have a clr assembly that access the internet via Sockets and file access. This require me to set the Assembly permissions level to External.
There are lots of messages on the net regarding this issue. none have worked for me.
Currently I'm trying to install the assembly with "sign the assembly" checked, createing a strong name key file.
When I run the installation I get the following message from the server
"Create failed for SqlAssembly 'xxx'.(Microsoft.sqlServer.Smo)
an exception occured while executing a Transact-SQL statement or batch
(Microsoft.SqlServer.ConnectionInfo)
A severe error occured in the current command. The results, if any, should be discarded.
This is the messag I get.
The following link does not display any usefull information.
TITLE: Microsoft SQL Server Management Studio
------------------------------
Create failed for SqlAssembly 'KBTTriggers'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+SqlAssembly&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
A severe error occurred on the current command. The results, if any, should be discarded.
A severe error occurred on the current command. The results, if any, should be discarded. (Microsoft SQL Server, Error: 0)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 2 Replies
View Related
May 1, 2008
We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.
CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.
View 8 Replies
View Related
May 31, 2007
I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import €œSystem.IO€? and have therefore set the permission levels to EXTERNAL_ACCESS.
I am receiving the same error message that many folks have received.
CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.
My CLR access is €œon€?
I have tried
1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to €œMy Windows Authentication ID€?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to €˜external€™
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.
I can compile BUT NOT DEPLOY
Any help would be greatly appreciated.
Regards Steve
View 8 Replies
View Related
Feb 29, 2008
I am trying to get a function I created in VB 5 for Access and Excel to work in SQL 2005. I was able to update the old VB code to work in VB 2005. I compiled and made a .dll, and I was able to register the new Assembly in SQL Server. When I try to create the Function, I get an error:
CREATE FUNCTION dbo.Temperature(@FluidName char, @InpCode Char, @Units Char, @Prop1 varchar, @Prop2 varChar)
RETURNS VarChar
AS EXTERNAL NAME FluidProps.[FluidProps.FluidProperties.Fluids].Temperature
Error returned:
Msg 6573, Level 16, State 1, Procedure Temperature, Line 21
Method, property or field 'Temperature' of class 'FluidProps.FluidProperties.Fluids' in assembly 'FluidProps' is not static.
Here is the code (part of it) in the VB class:
Header:
Imports Microsoft.SqlServer.Server
Imports System.Data.SqlClient
Imports System.Runtime.InteropServices
Imports System.Security
Imports System.Security.Permissions
Namespace FluidProperties
'Option Strict Off
'Option Explicit On
Public Partial Class Fluids
Function:
Function Temperature(ByRef FluidName As Object, ByRef InpCode As Object, ByRef Units As Object, ByRef Prop1 As Object, Optional ByRef Prop2 As Object = Nothing) As Object
Call CalcProp(FluidName, InpCode, Units, Prop1, Prop2)
Temperature = ConvertUnits("-T", Units, T, 0)
End Function
If I change the Function Temperature to Static, I get an error that functions cannot be Static. Its been a long time since I created the code and am having a hard time in my older age of getting the cobwebs out to make it work.
I have no problem getting the function to work if I call it from a VB form....so what do I need to do to get it to work on data in my SQL server?
Thanks
Buck
View 20 Replies
View Related
Dec 14, 2007
Hi,
I have got a simple C# assembly which call a ASP.net web service and executes a webmethod, now i want to call this assembly from sql server 2005 within the sql server function. can any body let me know how to do it.
Thanks
View 1 Replies
View Related
Apr 11, 2008
Hello,
I have problem with starting SQL Servre 2005 (Standard Edition), during start I get bellow errors.
----------------------------------------------------------------------
Error:
Could not start the SQL Server (SQL2005) service on Local Computer.
Error 14001: This application has failed to start because the
application configuration is incorrect.
Reinstalling the application may fix this problem.
--
Event Viewer:
Event Source: Service Control Manager
The SQL Server (SQL2005) service failed to start due to the following error:
This application has failed to start because the application configuration
is incorrect.
Reinstalling the application may fix this problem.
Event Source: SideBySide
Generate Activation Context failed for
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnsqlservr.exe.
Reference error message: The referenced assembly is not installed on your
system.
Event Source: SideBySide
Resolve Partial Assembly failed for Microsoft.VC80.ATL. Reference error
message:
The referenced assembly is not installed on your system.
Event Source: SideBySide
Dependent Assembly Microsoft.VC80.ATL could not be found and Last Error was
The referenced assembly is not installed on your system.
----------------------------------------------------------------------
Could you help, how resolve problem. I don't want reinstall all SQL Server.
This probably happened after Windows install (automatic) updates from
Windows Update web site.
Thanks in advance
ps.
Windows 2003 Enterprise Edition
--
Regards,
anxcomp
View 4 Replies
View Related
Oct 11, 2007
Hi to all,
i have one VS 2003 assembly,now i want to laod this asseembly in SQL Server 2005 .then i am going to write SQL-CLR 2005 function in which i want to use some functions of this VS 2003 assembly.is this possible?
please help me....
Thanks in advance.
Chetan S. Raut.
View 2 Replies
View Related
Jul 12, 2007
I am trying to create an assembly in SQL Server 2005 from a compiled VS 2005 solution in VB.net
I am getting the following error in SQL Server Management Studio:
Assembly 'PrintWorkOrder' references assembly 'crystaldecisions.crystalreports.engine, version=10.2.3600.0, culture=neutral, publickeytoken=692fbea5521e1304.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
Can someone explain to me how I can load the crystal assembly it is asking for?
(My SQL Server Instance is on a remote machinf from my Development Environment.)
Thanks.
View 5 Replies
View Related
Jan 8, 2006
Hi,
when deploying assembly from VS into SQL Server 2005, deployment fails with these error messages:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I'm deploying assembly with UNSAFE permission setting.
What's wrong, please?
Thanx, Fipil
View 10 Replies
View Related
Mar 29, 2008
I designed dll file to get data from sql server, i am calling the dll from ssrs 2005
in preview , everything is ok but after deploying and put the dll file in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerin and add this to rssrvpolicy.config
<CodeGroup
class="SqlClientPermission"
version="1"
Name="MySecurityExtensionCodeGroup"
Description="Code Group for Don's test security extension"
PermissionSetName="FullTrust">
<IMembershipCondition
class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQLReporting
ServicesReportServerinMyAssembly.dll"
/>
</CodeGroup>
i still get #Error
i try everything , i don't know what i can do.
pls help
View 1 Replies
View Related
Jul 26, 2006
Hi,
I create a dll assembly with the strong name in VB.Net environment.
Created assembly is registered also.
SQL Server 2005 configuraton level is set at "80"
I want to call that assembly from stored procedure with the database config level at "80"
But when i execute the stored proecure i get the following error
Error Source: "ODSOLE Extended Procedure"
Description: "Invalid Class String"
My Code in VB.Net is given below:
Imports System
Imports System.Reflection
Imports System.Globalization
Imports System.IO
Imports System.data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Imports Microsoft.VisualBasic
Imports System.Diagnostics
Imports GreatDataAccess
Namespace Test
Public Class clsTest
Public Shared Sub GenTest()
''''............ some code is here
End Sub
End Class
End Namespace
Stored Procedure
CREATE PROCEDURE [dbo].[PPGenerateFile]
AS
BEGIN
Declare @retVal INT
Declare @comHandler INT
declare @errorSource nvarchar(500)
declare @errorDescription nvarchar(500)
declare @retString nvarchar(100)
-- Intialize the COM component
EXEC @retVal = sp_OACreate Test.clsTest, @comHandler OUTPUT
IF(@retVal <> 0)
BEGIN
--Trap errors if any
EXEC sp_OAGetErrorInfo @comHandler,@errorSource OUTPUT, @errorDescription OUTPUT
SELECT [error source] = @errorsource, [Description] = @errordescription
Return
END
-- Call a method into the component
EXEC @retVal = sp_OAMethod @comHandler,'GenTest()',@retString
IF (@retVal <>0 )
BEGIN
EXEC sp_OAGetErrorInfo @comHandler,@errorSource OUTPUT, @errorDescription OUTPUT
SELECT [error source] = @errorsource, [Description] = @errordescription
Return
END
select @retString
END
Please Help me to solve this problem.
View 21 Replies
View Related
Aug 21, 2007
Hiiiiiiii all
I have to make a user defined function in c# as the class liberary and create a dll file, now i want to use this function in SQL Server 2005 as a part of CLR Integration
I have tried like this
CREATE ASSEMBLY abc
FROM 'C:abc.dll'
WITH PERMISSION_SET = SAFE
but it gives me
incorrect syntax error
so plzzzzz anyone help me wht to do in my probbbbbbbbb???????
Pratik Kansara
View 13 Replies
View Related
Jan 12, 2006
I previously had an ASP.NET 1.1 site running on my IIS 6.0 server (not the default website) with Reporting Services running in a subdirectory of that website. I recently upgraded to ASP.NET 2.0 for my website and was greeted with an error when trying to view a report. The error was very non-descript, but when I checked the server logs, it recorded the details as "It is not possible to run two different versions of ASP.NET in the same IIS process. Please use the IIS Administration Tool to reconfigure your server to run the application in a separate process."
First of all, I could not figure out where and how to do this. Secondly, I decided to try to also change the Reporting Services folders to run ASP.NET 2.0 and when I did, I was greeted with the following message when attempting to view a report:
"Failed to load expression host assembly. Details: StrongName cannot have an empty string for the assembly name."
Please help.
View 7 Replies
View Related
Aug 2, 2006
Hi
I am a bit paranoid about what I just did to my SQL Server 2005 with this CLR experiment.
I created a Class Lib in C# called inLineLib that has a class Queue which represents an object with an ID field.
in another separate namespace called inLineCLRsql, I created a class called test which will hold the function to be accessed from DB, I referenced and created an instances of the Queue class, and retrieve it's ID in a function called PrintMessage.
namespace inlineCLRsql{
public static class test{
public static void PrintMessage(){
inLineLib.Queue q = new inLineLib.Queue();
int i = q.queueId ;
Microsoft.SqlServer.Server.SqlContext.Pipe.Send(i.ToString());
}
}
}
to access this from the db, I attempted to create an assembley referencing inLineCLRsql.dll. This didn't work as it complained about inLineLib assembly not existing in the db. I then attempted to create an assembley for inLineLib but it barfed saying System.Management assembly not created.
so what I did is (and this is where I need to know if I just ruined sql server or not):
1- ALTER DATABASE myDB SET TRUSTWORTHY ON;.
2- CREATE ASSEMBLY SystemManagement
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Management.dll'
WITH PERMISSION_SET = UNSAFE
3- CREATE ASSEMBLY inLineLibMaster
FROM 'D:inLineServerinLineLibinDebuginLineLib.dll'
WITH PERMISSION_SET = unsafe
4- and finally
CREATE ASSEMBLY inLineLib
FROM 'D:inLineServerCLRSQLinlineCLRsqlinDebuginlineCLRsql.dll'
WITH PERMISSION_SET = SAFE
Everything works after those steps (which took some trial and error). I can create a sproc like:
CREATE PROC sp_test AS
EXTERNAL NAME inLineLib.[inlineCLRsql.test].PrintMessage
and it returns the Queue ID
Is there anything unadvisable about the steps above?
Thanks for your help
M
View 1 Replies
View Related
Jan 12, 2007
I want use Microsoft.Office.Interop.Excel to access excel file my clr. But that assembly is installed in GAC. How could I register it in SQL 2005?
thanks!
View 5 Replies
View Related
Feb 22, 2008
Hi.
One of my databases has an assembly that uses system.web. Therefore, in the deploy script, the developer has put in a create assembly for it like so
Create Assembly [System.Web]
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
WITH PERMISSION_SET = UNSAFE
followed by the create assembly statements for the actual bespoke assemblies.
The deploy script all works fine, as do the assemblies it creates.
However, when SQL restarts, the calls to the assemblies no longer work, and the only way to get them to is to run the deploy script (which drops them if they exist and recreates them) again.
Not particularly familiar with 2005 & CLR. Is this normal behaviour (I would have expected that once deployed, they were there after re-boot). If it's not how things are supposed to work, what's wrong, and how do I fix it?
Thanks
View 4 Replies
View Related
Apr 12, 2007
I am trying to create an assembly on a sql server 2005 machine but it gives me following error:
Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.
I tried using the alter authorization statement to change the owner.
It did not work.
I am able to create same assembly on another test database but can not create it on this database.
Is this because of orphan logins?
Thanks for the help.
Harshal.
View 4 Replies
View Related
Dec 27, 2006
Hi,
I ran the following in the management studio:
CREATE ASSEMBLY MyCLRAssembly from 'c: empMyCLRAssembly.dll'
WITH PERMISSION_SET = SAFE
Go
For some reason I get the following error:
Msg 6517, Level 16, State 1, Line 1
Failed to create AppDomain 'AdventureWorks.dbo[ddl].22'.
I tried to google this error, but couldn't find it...
I would appreciate it if someone can tell me what I'm doing wrong.
Ohad.
View 3 Replies
View Related
Apr 12, 2007
I am trying to create an assembly on a sql server 2005 machine but it gives me following error:
Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.
I tried using the alter authorization statement to change the owner.
It did not work.
The same assembly is created on another test database but can not create it on this database.
Is this because of orphan logins?
Thanks for the help.
Harshal.
View 6 Replies
View Related
Jun 20, 2007
Hello, I have an assembly used in a report (.rdl). The assembly enables to connect to Database via ODBC. Also, it had been signed (.snk) using the VS designer. In development platform, the following error was outputted when RUN the report (** PREVIEW is no error ** )
Error:
============================================================
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesRSReportHost.exe', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option
'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesReportingServicesLibrary.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Diagnostics.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option
'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Interfaces.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesReportingServicesNativeClient.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSWinSxSx86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700msvcm80.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Designer.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ReportPreview.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ProcessingCore.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ProcessingObjectModel.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.XmlRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.CsvRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ImageRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.HtmlRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ExcelRendering.dll', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesConnDB.dll', Symbols loaded.
'RSReportHost.exe' (Managed): Loaded
'expression_host_58bcf01c1a8442c3bbe45e4c4847f210', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Connection Failure.
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
A first chance exception of type 'System.Security.SecurityException' occurred in System.Data.dll
A first chance exception of type 'System.NullReferenceException' occurred in ConnDB.dll
A first chance exception of type 'System.Security.SecurityException' occurred in System.Data.dll
Error: Failed to retrieve the required data from the DataBase.
Object reference not set to an instance of an object.
Connection Failure.
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
The thread 0x12c8 has exited with code 0 (0x0).
The program '[3388] RSReportHost.exe: Managed' has exited with code 0 (0x0).
============================================================
Any idea for me? thanks a lot!
View 3 Replies
View Related
Nov 1, 2007
Hello there,
i have the following problem.
I need to get some .dll's into MS SQL-Server 2005, that i need to get a own made .dll installed.
When i try to:
Code Block
CREATE ASSEMBLY SystemWeb
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
WITH PERMISSION_SET = UNSAFE;
i get the following message:
Code Block
Warning: The Microsoft .Net frameworks assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 701, Level 17, State 13, Line 1
There is insufficient system memory to run this query.
When i try to create one of the another assemblies ( system.enterpriseservices, system.runtime.remoting, system.design ) i get the same message.
I looked for this Error and found only this BUG-report:
BUG#: 58267 (SQLBUG_70)
Article ID: 274030
http://support.microsoft.com/kb/274030/en-us
But this does not solve my problem.
As far as i know we use MS SQL-Server 2005 without any Service-Packs.
Question:
is there any Table/View to find out the Versionnumber/Service-Pack
In the moment i am waiting for our admin to install SP2 for SQL-Server,
hoping that this will fix the problem.
Greetings
View 10 Replies
View Related
Aug 1, 2007
I am using this code to create dll : Execute.cs
using System;
using Microsoft.SqlServer.Dts.Runtime;
public class Execute
{
public static void Package(string dtsxPath)
{
try
{
Package pkg;
Application app;
DTSExecResult pkgResults;
app = new Application();
pkg = app.LoadPackage(dtsxPath, null);
pkgResults = pkg.Execute();
}
catch (System.Exception ex)
{
throw ex;
}
}
}
Then this
c:Program FilesMicrosoft Visual Studio 8VC>csc /target:library C:SSISSSISE
xecute.cs /reference:C:SSISSSISMicrosoft.SqlServer.ManagedDTS.dll
It creates Execute.dll
but when I run this is sql server
CREATE ASSEMBLY ssid from 'c:Program FilesMicrosoft Visual Studio 8VCExecute.dll'
WITH PERMISSION_SET = UNSAFE
I am getting Error
Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10301, Level 16, State 1, Line 1
Assembly 'Execute' references assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
I don't see any place I am using System.window.forms
Any idea why? Thanks - Ashok
---------------------------------------------------------
I changed my location to to CSC
C:WINNTMicrosoft.NETFrameworkv2.0.50727>
Now I get this error
Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'accessibility, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.serialization.formatters.soap, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10301, Level 16, State 1, Line 1
Assembly 'Execute1' references assembly 'microsoft.sqlserver.msxml6_interop, version=6.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
---------------------------------------------
I managed to found this DLL Microsoft.SQLServer.msxml6_interop.dll so I copied to same location
Now It's looking for
microsoft.sqlserver.sqltdiagm - Which I am not able to find any place .......................
View 6 Replies
View Related
Mar 12, 2008
I encountered something strange, deploying the following assemblies
CREATE ASSEMBLY [Sentry]
AUTHORIZATION [dbo]
FROM 'c:clrSentry.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS;
GO
CREATE ASSEMBLY [Sentry.XmlSerializers]
AUTHORIZATION [dbo]
FROM 'C:clrSentry.XmlSerializers.dll'
WITH PERMISSION_SET = SAFE;
GO
Sentry.XmlSerializers errored out with:
Msg 6218, Level 16, State 2, Line 2
CREATE ASSEMBLY for assembly 'Sentry.XmlSerializers' failed because assembly 'Sentry.XmlSerializers' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializerContract::CanSerialize][mdToken=0x600006e][offset 0x00000001][token 0x01000019]System.TypeLoadException: Could not load type 'Sentry.SentryDataService.SentryDataService' from assembly 'Sentry, Version=1.0.2764.18017, Culture=neutral, PublicKeyToken=null'. Type load failed.
The interesting thing is that when I deploy this locally on my machine, there are no problems whatsoever. Using sp_configure the servers appear to be set up the same way. The database also has trustworthy set on for both.
Anything, I could be missing? Thanks
View 8 Replies
View Related
Jan 7, 2008
When I add a custom assembly
I am trying to pass certain fields in dataset I am getting the following error
invalid fields i.e. that is fields that I passed are invalid.
It also says multi path identifier for microsft.reportingservices.reportobjectmodel.fieldimpl cud not be found.
Thanks
Sai
View 1 Replies
View Related
Mar 28, 2008
i deigned assembly and referced it to my report in preview
when deployed the report , i get #Error
i don't add any cas code.
pls help
View 4 Replies
View Related
Sep 15, 2006
Hello ,
when I try to create an assembly on SQL2005
Create assembly LibSql
FROM 'c:SQLNETLIBSQLLIBSQL.dll'
WITH PERMISSION_SET = External_Access
I got the following error:
Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x80131522. You need to restart SQL server to use CLR integration features.
Configuration:
Server: 8 processors with 16 GB RAM
select @@version returns:
Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
AWE configuration is enabled.
CLR is enabled
Server was upgreaded from sql 2000 SP3a
Restart of Sql doesn't help
Thank you for your advice.
artek
View 1 Replies
View Related
May 16, 2006
Help.
When I try to CREATE/Register a third party assembly (dtsearchNetApi2) within SQL server I am getting an error (see below). I have the source code for dtsearchNetApi2 but it is in C++ and I would like to avoid having to extend/modify it if that is avoidable. I have written a 'wrapper' class in C# but sine it references dtsearchNetApi2.dll I can't register that dll either.
CREATE ASSEMBLY DBSEARCHNETAPI
FROM 'C:TempdtsearchNetApi2.dll'
WITH PERMISSION_SET = UNSAFE
Msg 6218, Level 16, State 3, Line 2
CREATE ASSEMBLY for assembly 'dtSearchNetApi2' failed because assembly 'dtSearchNetApi2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
dtsearchNetApi2 has references to unmanaged code. The dtSearchNetApi2.dll is a .NET 2.0 wrapper around C++ objects exported in dten600.dll. It is implemented in MSVC++ with Managed Extensions is implemented in C++/CLI 2.0.
View 3 Replies
View Related
Feb 28, 2007
I created an assembly to access my SSRS web service in a Script task. The package runs fine on my machine but gets the following error from the production box.....
The script threw an exception: Could not load file or assembly 'Microsoft.SqlServer.ReportingServices2005, Version=0.0.0.0, Culture=neutral, PublicKeyToken=3bd4760abc5efbcb' or one of its dependencies. The system cannot find the file specified.
I followed the exact same procedures for creating the .dll on the production box as I did developing on my machine...strong name, load to gac etc....but it still cannot find it.
My production SQL Server is 64 bit so perhaps there is another step I need to take? Anyone have a clue as to what I may be missing?
TIA
View 1 Replies
View Related
Oct 18, 2007
Hello there,
I am having trouble with the following and appreciate any help.Thanks in advanced.
I have created an assembly to delete records in exchange (which works fine when testing it in debug mode). I then create the assembly in SQL server 2005(tried both unsafe and external access btw), and then i create a stored procedure calling the assembly.
Now my error occurs when i try to execute this stored procedure in SQL Server. I get the following...
Msg 6522, Level 16, State 1, Procedure sp_DeleteExchApp, Line 0A .NET Framework error occurred during execution of user defined routine or aggregate 'sp_DeleteExchApp': System.Security.SecurityException: System.Security.Permissions.SecurityPermissionSystem.Security.SecurityException: at App_Delete.eSay.AppointmentDelete.DeleteAppointment(Guid GUID).(1 row(s) affected)
Now when i have looked around the web, i have come accross people saying that it is to do with the assembly trying to access something it does not have permission for. But i cant figure out what that is or why it is throwing an error.
The code for the assembly is as follows:
Public Shared Sub DeleteAppointment(ByVal GUID As System.Guid) Dim CalendarURL As String Dim ItemURL As String Dim Rs As New ADODB.Recordset Dim Rec As New ADODB.Record Dim Conn As New ADODB.Connection Dim iAppt As New Appointment Dim Target As String Dim strCRMGUID As String Dim strGUID As String Dim sSQL As String Dim Check As String strCRMGUID = GUID.ToString 'Using the Exchange OLE DB provider CalendarURL = "file://./backofficestorage/esay-solutions.co.uk/public folders/Office Diary" 'Open a recordset for the items in the calendar folder Rec.Open(CalendarURL) Rs.ActiveConnection = Rec.ActiveConnection sSQL = "SELECT ""DAV:href"", " & _ " ""urn:schemas:calendar:location"", " & _ " ""urn:schemas:calendar:dtstart"", " & _ " ""urn:schemas:calendar:dtend"", " & _ " ""urn:schemas:httpmail:textdescription"" " & _ "from scope('shallow traversal of """ & CalendarURL & """')" Rs.Open(sSQL, Rec.ActiveConnection, CursorTypeEnum.adOpenUnspecified, LockTypeEnum.adLockOptimistic, 1) 'Enumerate the recordset, checking each item's location If Rs.RecordCount > 0 Then Rs.MoveFirst() Do Until Rs.EOF 'get the location of each item Check = Rs.Fields(CdoHTTPMail.cdoTextDescription).Value strGUID = StripGUID(Check) 'test for desired location If (strGUID = strCRMGUID) Then Rs.Delete() End If Rs.MoveNext() Loop End If End Sub
Private Shared Function StripGUID(ByVal i_strAppDescription As String) As String
'Function to strip the GUID from the message field Dim r As Integer Dim SearchChar As String Dim testPos As Integer Dim GUID As String SearchChar = "**¦" testPos = InStr(i_strAppDescription, SearchChar) testPos = testPos + 3 If testPos > 0 Then GUID = Mid(i_strAppDescription, testPos) End If StripGUID = GUID End Function End ClassEnd Namespace
Thanks again for any help.
View 5 Replies
View Related
Jul 3, 2006
I ran the following:
CREATE ASSEMBLY A3rdPartyDLL
FROM 'C:Program Files3rdPartyComponents3rdParty.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
and got the following error message:
Assembly 'A3rdPartyDLL' could not be installed because existing policy would keep it from being used.
How can I change the 'existing policy'?
View 12 Replies
View Related
Jan 25, 2006
Hi,
I am attempting to load an assembly that has been stored in a table as a byte array. I have created a c# class called AssemblyLoader that takes in 2 parameters, the assembly name and the parameters for the assembly (just a query string).
From this it returns the assembly byte array using a simple sql statement within the class using the assembly name to select the assembly bytes to return from the database.
The returned byte array of the assembly is loaded using:
Assembly assembly = Assembly.Load(assemblyBytes);
This seems to be the line that SQL Server 2005 is erroring on. Do I need to add some extra assemblies to the database and if so which ones.
Error:
Msg 6522, Level 16, State 1, Procedure ClientInterface, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'ClientInterface':
System.IO.FileLoadException: LoadFrom(), LoadFile(), Load(byte[]) and LoadModule() have been disabled by the host.
System.IO.FileLoadException:
at System.Reflection.Assembly.nLoadImage(Byte[] rawAssembly, Byte[] rawSymbolStore, Evidence evidence, StackCrawlMark& stackMark, Boolean fIntrospection)
at System.Reflection.Assembly.Load(Byte[] rawAssembly)
at Reflector.runQuery(String query, String parameter)
Thanks for your help.
View 6 Replies
View Related