Hi,
When I am trying to schedule the SSIS package and start the job, I am getting the following error. It is not executing properly.
"The job failed. The Job was invoked by User prakash.srinivasan. The last step to run was step 1 (TestSchStep1)."
Pls provide some solution to this.
Thanks in advance.
Regards,
Prakash Srinivasan.
Hello Everyone,
When i try to scedule a job on SQL Server Management Studio it gives the Following Error:
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.SimpleObjectKey' to type 'Microsoft.SqlServer.Management.Smo.Agent.JobObjectkey'.(Micorsoft.SqlServer.Smo)
Can anyone tell me why ?
MS SQL Server Details:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
Hi,
I have created the package in a local machine and would like to schedule the package without integration services.
Is there any workaround for the above scenario.
Thanks in advance
Regards
Ramesh.R
Hi All
I'm new in SSIS Development. I have manage to design and deploy my Package to production SQL(MSDB) Security rely on server storage.
The problem start when I start scheduling in SQL JOB I'm getting the following error.
Executed as user: UCC-SQLSYSTEM. ...ion 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:57:01 AM Error: 2008-05-12 08:57:02.08 Code: 0xC0202009 Source: Test_deployment_Table Connection manager "BLAKE-DBN12.Staging" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'BLAKEUCC-SQL$'.". End Error Error: 2008-05-12 08:57:02.08 Code: 0xC020801C Source: Data Flow Task Test_Deployment [97] ... The package execution fa... The step failed.
What can I do to avoid this.
Hi All
I have created a SSIS Package to complete various tasks and I have managed to deploy it on SQL, however I can't find it in the Management Studio. I just want to be able to schedule this package to run as a job.
Any Ideas?
Hi ,
How do I schedule SSIS package.
Hi
I am trying to scheduling package using "Executing Sql Server Agent Task" before that I create new job,But there is error in STEP "Command Line Parameter are Invalid"
Anybody help me for configure jobs for Scheduling
I am new to SQL Server
Thanks in Advance
Hi,
I want to schedule an SSIS package to run always. So I tried scheduling the SSIS Package as a Job in the SQL Server Agent and I have set the Schedule Type as "Start automatically when SQL Server Agent Starts".
I have used an WMI Event Watcher task to raise an event when the file dropped in a folder.
And I have provided the configuration file also properly in the job. But still my package is not running properly. The application is running, but it is not raising any events even when the files are dropped in that folder.
Pls anyone of you provide some solution for this.
Thanks & Regards,
Prakash Srinivasan
Hi
I have a strange scheduling problem.
I have a job, i test it through BIDS - Works
I test it through SSMS - works
I run the job - Works
I schedule for a run time job - Works
I schedule for a recurring job - Works
However (here is the really annoying part) it fails to run at the night run (11.20PM)
there are 6 other packages that run fine after it , 11.30 , 1AM .. 4 AM etc ...
So
last night I changed the package to run at a later time, and it worked, but the other package that
ran 2nd (which now ran 1st) failed !!
its almost as if the 1st package has to fail !!!!!
When i look at the history and detailed log all it says is "The step Failed"
anyway , I can set up a workaround by starting a dummy job that is supposed to fail..
FYI the jobs are run under administrator and they are protected by a password (encryptSensitiveWithpassword) .
I am getting an error when I try to schedule a package. I can run the package with no problems from BIDS. For some reason it is throwing an error when I try to schedule the package using SQL Server Agent. Information on how to resove this would be greatly appreciated.
Executed as user: MACHINESYSTEM. ...n 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:41:55 PM Error: 2007-02-19 17:41:56.01 Code: 0xC0011007 Source: {48427B5A-10F6-4054-B7EB-F0F19B90F334} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2007-02-19 17:41:56.01 Code: 0xC0011002 Source: {48427B5A-10F6-4054-B7EB-F0F19B90F334} Description: Failed to open package file "C:Documents and Settingsfirst.lastMy DocumentsVisual Studio 2005ProjectsPackage 1.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the X... Process Exit Code 4. The step failed.
Hi,
I have created the package in ssis and i want to schedule it local machine without using integration services. Any workaround for scheduling the Package?.
Specify me the steps to configure the package.
Thanks
Regards
Ramesh.R
How can i plan the execution of a package ?
For example, i want to execute the package every 2 minutes for all the time.
I do not want to use SQL Server Agent to do this. I want the package to self contained to do it.
Thanks
Rohit
I have created a package that loads data . I need advice on a quik way to schedule this baby .
Regards to ALL
Hey,
I have an SSIS package that invokes a web service and then updates a table. It runs fine as long as I am running it on the local machine. However, as soon as I save this package to the sql server, and try to schedule this as a job, it starts to fail. Now, the web service writes to an xml file and also uses an xsd and and an xsl file. When I save a dts package to the sql server, whats the proper way of referencing these files? I think this probably is what is making the package to fail, ut I am not sure.
Any help is greatly appreciated!!
Thanks!
Hi:
I created a fairly simple SSIS package to move data from a remote server which uses SQL Server Authentication to a local server that uses Windows Authentication. Everything works fine when executing the package within BI studio and if I execute the package by connecting to SSIS. If I schedule it as a SQL Server Agent Job, however, the non-integrated security fails unless I manually edit the connection to include the password. Obviously this is insecure because it is in plain text. What can I do?
Thanks.
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
I have an SSIS Package that executes a stored procedure. It turns out my stored procedure was missing.
However, the SQL Job Scheduler reported that step as success.
Can anyone tell me why?
`Le
I am scheduling the package to run on the nightly basis everyday using windows scheduled task.
How do i check whether the package ran successfully or it has given any error.
Can anyone please suggest me if I can log the error in some table of SQL server.
PLease suggest the steps.
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
I have created a DTS Package which collects data from DB2 and stores in a table on SQL Server v 7.0. The execution of the package works fine.
When I schedule the package by right-clicking and selecting SCHEDULE PACKAGE,
I fill in the dialog box. When the package runs, I receive the following error:
DTSRun: Loading... Error: -2147217390 (80041012); Provider Error: 0 (0) Error string: [Microsoft][ODBC SQL Server Driver][Named Pipes]ConnectionOpen (CreateFile()). Error source: Help file: Help context: 0. Process Exit Code 1. The step failed.
I get this same error when I run the package as a job.
The package is in the repository. My run command looks like:
DTSRun /S 111.11.11.11 /U sa /P xxxx /N DTS_Projections /R
The package owner is sa.
Can anyone offer any advise
Can I call a DTS package from server1 to run on server2 if the package is on server1?
Does the package have to be on both servers? Both databases are identical.
And if not, how do I script the DTS package on server1 to be used and created on server2?
I would appreciate your help.
Thanks,
Dianne
I created a simple test DTS package to import a text file (2 rows, 5 fields wide) into a test table. When I manually execute the package in DTS, it is successful. When I schedule the package and the text file is located on the local drive (C:) the package is successful. I then modified the package to import the same file from the network drives, manually executing the import the package is successful. But when I schedule this package to import from a network drive it fails. Help? Where could the problem come from? NT security, limitations in SQL Server 7 SW, different levels of security between manual and scheduled processes, network security?
FYI: I am running Server 7, on WIN NT Workstation 4.0, SP5, DB size 12 GB, rolling 90 days of data.
I can't get my dts package to run when I schedule it.
I keep getting this message.
"The job failed. The Job was invoked by User DALLASdwatson. The last step to run was step 1 (Store)."
I created the DTS Package "Store" and then saved it to Repository.
I can execute the package manually. But can't get it to work when I schedule
it.
Can anyone Please help me and tell me what I am doing wrong.
Thank you for your help.
Dianne
HAVE CREATED LOCAL DTS PACKAGES WHICH I AM ABLE TO SCHEDULE OK. MY PROBLEM IS I HAVE A DTS PACKAGE WHIC
IMPORTS DATA FROM REMOTE DATABASE, THIS PACKAGE WILL RUN WHEN EXECUTED BUT I CANNOT SCHEDULE IT.
ANY IDEAS PLEASE
THANKS IN ADVANCE
PHILL
I got a DTS package and when i schedule it to run every day it is failing....??
When i normally run the DTS it is executing but when i click on the JOB and start the DTS it is failing.... is there any permission issues i should look at while shceduling a Job..???? :confused:
Hi,
I have a DTS package which populates tables in a database from text files.
This is scheduled to run at 8:30am every morning. I did this by right-clicking on the package and selecting "Schedule Package". I can see the task has been set up in SQL Server Agent's job list.
This task only runs for the first time, and not any further. This task runs "successfully" the first time, i.e the tables in the database are populated with records from a text file. However, when I click on job history for the job, it says there is no job history. The status on the job says "Executing Job Step '1 - ....".
I believe the first time the job was executed, it was not completed properly, hence the status has not been set to "Not Running".
The owner of the package is administrator on the server, therefore have full access to the server. The task was scheduled by the administrator too.
Does anyone have any suggestions on how I can fix this?
Thanks,
Vera
I am using Enterprise manager with an MSDE engine. I have created a DTS package that updates a table in one of the databases. If I right click and choose "Execute Package" it runs...No sweat. When I try to use the scheduler to run the job every hour, it always fails between 1 and 10 seconds into the job...It only returns the error "Failed During Step 1."
I'm wondering if this feature won't work with MSDE? Does anyone have any ideas?
I have setup a DTS Package using ActiveX to update some information via the SQL DB.
When i execute the DTS Package manually by right clicking on it and clicking on Execute Package, it works fine everytime.
When I try to schedule the package to run twice a day automatically, when the package starts, it executes once, however the status still shows executing and the next run time is listed as unknown. It seems to hang up and never finish. I do have the Step to quit after success and it still seems not to quit.
Any suggestions. This is the first DTS package I have ever used.
Thanks for any help
Hi All
I am having a slight problem with building a SSIS package and then scheduling it to run.
Basically I have created a .dtsx package and gone to Build Package and I can find it anywhare in SSMS. This is the first time I have created one of these so I apologise if thi sis a really stupid question.
Thanks
Gopher
I have created a DTS package that imports a comma delimited (CSV) textfile into a table. One field uses a VB script that parses a date intothe proper format for the transformation. All other fields are copiedas is. When I run the package directly the date field is importedcorrectly (ie MM/DD/YYY). When I schedule the package to run (the jobis in SQL Server Agent, Jobs) the month and day entries aretransposed. In other words the date field is imported as DD/MM/YYYY(ie Dec 4, 2003 should be 12/4/2003 but the scheduled job imports itas 4/12/2003)Does anyone have a fix for this ?Thanks
View 1 Replies View Related