Hi,
I'm deploying tran repln between 2 SQL Server 2005 databases and when viewing the 'Distributor to Subscription History' see a error message:
Incorrect syntax near the keyword 'where'. (Source: MSSQLServer, Error number: 156)
On the subscriber, I don't see the snapshot being generated....Please advice.
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedHi there,
I have setup merge replication which successfully synchronizes with a group of desktop users using SQL Compact Edition.
However now I have setup Article Filters and when I attempt to regenerate the snapshot I get the following error:
Invalid column name 'rowguid'.
Failed to generate merge replication stored procedures for article 'AssignedCriteria'.
When I look at publication properties at the Articles page.. All my tables have the rowguid uniqueidentifier successfully added to tables and selected as a compulsory published column, apart from the table above "AssignedCriteria".. Even when I attempt to select this column in the article properties page and press ok, when I come back it is deselected again. ( The Rowguid column is however physically added to the table)
I have scripted the publication SQL and then totally reinstalled from scratch, including the database but for some reason it doesn't like this table. I remove the article filters, but still this "rowguid" is never "selected" in article properties.
We are using Uniqueidentifiers in other columns as well for historical reasons, but this doesn't appear to be a problem in other tables..
DDL For this problematic table is as follows
CREATE TABLE [dbo].[AssignedCriteria](
[AssignedCriteria] [uniqueidentifier] NOT NULL,
[CriteriaName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TargetScore] [numeric](5, 0) NULL,
[HRPlan] [uniqueidentifier] NULL,
[ActualScore] [numeric](18, 0) NULL,
[Criteria] [uniqueidentifier] NULL,
[Employee] [uniqueidentifier] NULL,
[IsActive] [bit] NULL,
[addDate] [datetime] NULL,
[totalscore] [numeric](5, 0) NULL,
[isCalc] [bit] NULL,
[Weight] [decimal](18, 2) NULL,
[ProfileDetail] [uniqueidentifier] NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_7FF25DF903B6415FBFF24AC954BC88E4] DEFAULT (newsequentialid()),
CONSTRAINT [PK_AssignedCriteria] PRIMARY KEY CLUSTERED
(
[AssignedCriteria] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
Thanks.
Hi,
Can someone provide some troubleshooting for the following error I have during the replication setup on SQL 2005??
Thanks,
Frank
System Engineer
===================================
Cannot connect to LASC06.
===================================
Failed to connect to server LASC06. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Common.ConnectionManager.Connect()
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.ValidateConnection(UIConnectionInfo connInfo, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------
Server Name: LASC06
Error Number: 233
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ThrowExceptionAndWarning()
at System.Data.SqlClient.TdsParserStateObject.WriteSni()
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.Common.ConnectionManager.InternalConnect(WindowsIdentity impersonatedIdentity)
at Microsoft.SqlServer.Management.Common.ConnectionManager.Connect()
Hi
I am trying to crate a replication on my cluster database. I create the replication for one table and it works fine but when i try to create the replication for another table and try to run the status of the snapshot agent i receive and error saying
TCP Provider: An existing connection was forcibly closed by the remote host
I try to run it again but then i receive the following errir
Failed to read prelogin response.
Can somebody tell me why is this happenning and how can i fixed
Thanks
JEC
I have been attempting to create a snapshot of a database. Just install a SQL2005 cluster. The snapshot appears to create ok, but when I view snapshot agent status I get the following error which I have not been able to figure out:
Unable to start execution of step 2 (reason: Error authenticating proxy ohaevservices, system error: Logon failure: unknown user name or bad password.). The step failed.
This account has admin and dbowner --- Help
I am using snapshot replication to copy data from one database to another. I truncate the destination table first. The publisher and the subscriber are different databases on the same server. The data turns into 1 unrecognizable row.
Here is what the source table looks like:
displayTypeID, displayType
1, Title List Formats
2, Title Details
3, Title List Export
4, Pricing Notes
5, clone Mask 001
6, clone Mask 002
7, clone Mask 004
8, clone Mask 008
9, hide From Admin
10, not Common Attr
11, Insert Title
12, title Types
The resulting data looks like this:
DisplayType, displayTypeId
, 1660953600
I see no errors in replication and nothing in the source table looks like bad data that could cause such a malady. I see the problem on two different servers now and identified the source of the problem, the column order is reversed in the source and destination tables. The data types do not even match so I would at the very least expect an error from bcp.
We have a large number of clients attempting to replicate two publications on 2005 Express databases (2 publications subscribed to the one subscriber database) with our 2005 Server (9.00.3042.00 SP2 Standard Edition) and experiencing two significant problems:
1) Users experience the following message:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Subscriber for changes not yet sent to the Publisher. You must reinitialize the subscription (without upload).
This problem should not apparently occur with SQL Server 2005 (or 2005 Express) instances with SP2 applied. All clients experiencing this problem have SP2 installed as does our Server and the retention period is 30 days. The subscribers have been replicating well under that.
2) Replications never succeed after appearing to replicate/loop around for hours
This issue is the most critical as we have clients who have been installed and re-installed with new instances of SQL Server 2005 Express, new empty databases (on subscriber before snapshot extraction), and using fresh snapshots (less than an few hours old) which cannot successfully replicate.
Interestingly there is at least 1 instance where several computers are subscribed and successfully replicating the same database as another where replication refuses to succeed.
To test we have taken a republished database from another 2005 Server which is working fine and restored it to the same server as the one holding the database with which we are experiencing problems and subscribed to it. This test worked fine and replication of both publications went through fast and repeatedly without showing any signs of problem.
This indicates that the problem is perhaps data related as it appears localised to that database.
Below are two screenshots which may assist.
Screenshot 1 Shows that on the server side the replication attempts look like they are succeeding despite the fact that the subscriber end does not indicate success. Also the history indicates the the subscription has spent all it's time initialising and not merging any changes.
Screenshot 2 Shows a rogue process which has appears on many of the problem child subscribers. It shows a process running with no end time even though the job indicates failure in the message and even though other replication attempts appear to have succeeded after it. This process stays in the history showing that it is running even when I can find no corresponding process for it.
Can anyone suggest a further course of action/further testing/further information required which may assist?
This is extremely urgent and any assistance would be greatly appreciated!
Thanks in advance!
Scott
Hi,
Is there any way to measure bandwith usage during merge replication between sql server 2005 and sql server mobile 2005 running on a cradled wm5 mobile device.
Attaching the windows performance monitor to the network connection established over usb would work although I was wondering if there was something specific for this case integrated into Sql server 2005 / sql server mobile 2005 / Sql server management studio / third party tools that i could use ?
thnx,
pdns.
Hello everybody!
I hope that someone could help me.
I have a problem when i start sincronyzing with the emulator of MSVS2005 to SQL2005 in Windows Vista. I have the same program in the emulator, but sincronyzing with windows XP Pro and no problem...
I configure the connection to use the IUSR.
The source code that i use:
repl.InternetUrl = @"http://laptop/SQLMobileIIS/sqlcesa30.dll";
repl.Publisher = @"laptop";
repl.PublisherDatabase = @"database";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"Pubdatabase";
repl.Subscriber = @"SQLMobile";
repl.SubscriberConnectionString = @"Data Source='" + nomeFicheiroBD + "';Password='3409'";
The error that returns is:
"Failure to connect to SQLServer with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect"
Does anybody knows what i can do?
HELP I NEED SOMEBODY TO HELP!
Thanks!
I have written following code in my application
I just want to display all the data of a Single table into a Data Grid, I know that we can drag and drop the table on to a form and datagrid is generated, but here I want to retrive those values through my code, how should i do that
I am getting following errors while running the program
Error 1) Error No. 28037, MS SQL Server 2005 Evrywhere Edition
Error: A request to send data to the computer running IIS has failed. For more information see HRESULT
Error 2) Error No. 0, SQL Server 2005 Evrywhere Edition ADO.Net Data Provider
Error: The specified table does not exist [ JobLists ].
Can anybody please tell me, where I went wrong ??? In this code anywhere else????
Note: While adding a Data Source of SQL Server 2005 Mobile Edition, I have added that .sdf file into my project, thats why I have written the Data Source as : .DbFile.sdf
@"Data Source = .DbDotNetCF.sdf";
The code is as follows:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace DeviceApplication1
{
public partial class Form1 : Form
{
string filename = @".DbDotNetCF.sdf";
private DataSet dsJobLists;
public Form1()
{
InitializeComponent();
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://localhost/WebsiteDotNetCF/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"DotNetCF";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"PubDotNetCF";
repl.Subscriber = @"SubDotNetCF";
repl.SubscriberConnectionString = @"Data Source='" + filename + "';Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(filename))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
// Display Same Data In Another DataGrid : dataGrid1
SqlCeConnection cn = new SqlCeConnection(@"Data Source='" + filename + "'");
SqlCeDataAdapter daJobLists = new SqlCeDataAdapter("SELECT JobListsID, JobID, PersonID FROM JobLists", cn);
if (dsJobLists == null)
{
dsJobLists = new DataSet();
}
try
{
dsJobLists.Clear();
daJobLists.Fill(dsJobLists, "JobLists");
dataGrid1.DataSource = dsJobLists.Tables["JobLists"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
DeleteDB();
if (DbDotNetCFDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'dbDotNetCFDataSet.JobLists'.
this.jobListsTableAdapter.Fill(this.dbDotNetCFDataSet.JobLists);
}
}
}
}
I have created a merge replication correctlly( I suppose, there were no errros)
Please help
Your help will be appriciated
Hi,
View 36 Replies View RelatedI'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
Hi!
View 14 Replies View RelatedHi all,
I would like to know about "Replication in Sql Server 2005" in a step by step manner! would anybody help this out!
Thanks in anticipation
Hi,
I have two servers with sql server 2005, one is in the main office and the other in a store...
I would like that the items table from the main office send new data to the server at store, and the sales data from the store to be send to the main office, can anyone help me to do that?!
Thanks
Hi
I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.
Has anybody done this before. If yes what will I need to check. Can you please let me know :-
1) SQL Server 2000 which SP should be installed to support this enviroment.
2) SQL Server 2005 which SP should be installed to support this environment.
3) Any thing that I need to look out for.
Thanks for any inputs on this.
Regards
I'm getting the following error when launching the database mirroring monitor and attempt to connect to my database.
TITLE: Connect to Server
------------------------------
Cannot connect to dborat01.hs.pitt.edu.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'xxxxxx'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
We are implementing 2005 transaction replication on source database to target staging subscring database but we want to keep all transaction changes from source within staging subscribing tables.
If source column gets updated we want to keep old record and new updated record in staging subscriber. Transaction replication synchronizes but does not keep history on subscriber. Do we update stored proc's
anyone have examples of code or ideas??
Hi,
I have a problem configuring Bidirectional replication in SQL Server 2005 SP2. I configured Publication and Subscription on two different SQL 2005 instances on different machines (Station1SQL2005 and Station2SQL2005 respectively). Databases are DBTest1 in Station1 and DBTest2 in Station2. I have two tables one in DBTest1 and the other in DBTest2.
Script for the above configuration:
This below configuration does not work if i configure Publication and Subscription on the same machines
---*************************************************************************************************
For Station1:
IF EXISTS(SELECT * FROM sys.databases WHERE name = 'dbtest1')
DROP DATABASE dbtest1;
CREATE DATABASE dbtest1
go
--Create table named two_way_dbtest1 that have an IDENTITY column with the NOT FOR REPLICATION option set
USE dbtest1
go
IF EXISTS (SELECT * FROM sysobjects WHERE name LIKE 'two_way_dbtest1')
DROP TABLE two_way_dbtest1;
GO
CREATE TABLE two_way_dbtest1
(
pkcol INTEGER PRIMARY KEY NOT NULL,
intcol INTEGER IDENTITY(1,1) NOT FOR REPLICATION,
charcol CHAR(100),
timestampcol TIMESTAMP
)
/*Allocate a predetermined range of values to the primary key column
so that the values on the different servers are not in the same range.
For example, you can enforce 1-1000 as the key range for the two_way_dbtest1 table in the dbtest1 database,
and then enforce 1001 -2000 as the key range for two_way_dbtest2 table in the dbtest2 database.
To do so, use the following code:
*/
-- Constraint to enforce a range of values between 1 and 1000 in database dbtest1
USE dbtest1
go
ALTER TABLE
two_way_dbtest1
WITH NOCHECK
ADD CONSTRAINT
checkprimcol CHECK NOT FOR REPLICATION
(
pkcol BETWEEN 1 AND 1000
)
go
--Enable your server as the distributor, and then create a distribution database
--Ensure SQL Server Agent service is running before executing the below statement.
USE master
go
sp_adddistributor @distributor = 'Station1SQL2005'
go
--create a distribution database for the distributor
USE master
go
sp_adddistributiondb @database='distribution'
go
--Enable the computers running SQL Server that are participating in the replication as publishers
USE master
go
exec sp_adddistpublisher
@publisher = 'Station1SQL2005',
@distribution_db ='distribution',
@security_mode = 0,
@login = 'xxxxxxx',
@password = 'xxxxxxx',
@working_directory ='F:ReplicationReplication Working Directory'
--Enable the identified databases for replication
USE master
go
exec sp_replicationdboption N'dbtest1', N'publish', true
go
--Create the custom stored procedures in the dbtest1 database
USE dbtest1
go
-- INSERT Stored Procedure
CREATE PROCEDURE sp_ins_two_way_dbtest1
@pkcol int,
@intcol int,
@charcol char(100),
@timestampcol timestamp,
@rowidcol uniqueidentifier
AS
INSERT INTO two_way_dbtest1
(
pkcol,
intcol,
charcol
)
VALUES
(
@pkcol,
@intcol,
@charcol
)
go
--UPDATE Stored Procedure
CREATE PROCEDURE sp_upd_two_way_dbtest1
@pkcol int,
@intcol int,
@charcol char(100),
@timestampcol timestamp,
@rowidcol uniqueidentifier,
@old_pkcol int
as
DECLARE @x int
DECLARE @y int
DECLARE @z char(100)
SELECT
@x=pkcol,
@y=intcol,
@z=charcol
FROM
two_way_dbtest1
WHERE
pkcol = @pkcol
DELETE
two_way_dbtest1
WHERE
pkcol=@pkcol
INSERT INTO two_way_dbtest1
(
pkcol,
intcol,
charcol
)
VALUES
(
CASE ISNULL(@pkcol,0) WHEN 0 THEN @x ELSE @pkcol END,
CASE ISNULL(@intcol,0) WHEN 0 THEN @y ELSE @intcol END,
CASE ISNULL(@charcol,'N') WHEN 'N' THEN @z ELSE @charcol END
)
go
-- DELETE Stored Procedure
CREATE PROCEDURE sp_del_two_way_dbtest1
@old_pkcol int
AS
DELETE
two_way_dbtest1
WHERE
pkcol = @old_pkcol
go
--Create a transactional publication, and then add articles to the publication in both the dbtest1 and the dbtest2 databases
--In the database dbtest1.
USE dbtest1
go
-- Adding the transactional publication.
EXEC sp_addpublication
@publication = N'two_way_pub_dbtest1',
@restricted = N'false',
@sync_method = N'native',
@repl_freq = N'continuous',
@description = N'Transactional publication for database dbtest1.',
@status = N'active',
@allow_push = N'true',
@allow_pull = N'true',
@allow_anonymous = N'false',
@enabled_for_internet = N'false',
@independent_agent = N'false',
@immediate_sync = N'false',
@allow_sync_tran = N'true',
@autogen_sync_procs = N'true',
--To avoid expiry if there are 5 continuous holidays for a company. If 0, well-known subscriptions
--to the publication will never expire and be removed by the Expired Subscription Cleanup Agent.
@retention = 120
go
EXEC sp_addpublication_snapshot
@publication = N'two_way_pub_dbtest1',
@frequency_type = 4,
@frequency_interval = 1,
@frequency_relative_interval = 0,
@frequency_recurrence_factor = 1,
@frequency_subday = 2,
@frequency_subday_interval = 10,
@active_start_date = 20080225,
@active_end_date = 99991231,
@active_start_time_of_day = 070000,
@active_end_time_of_day = 235959
go
-- Adding the transactional articles.
EXEC sp_addarticle
@publication = N'two_way_pub_dbtest1',
@article = N'two_way_dbtest1',
@source_owner = N'dbo',
@source_object = N'two_way_dbtest1',
@destination_table = N'two_way_dbtest2',
@type = N'logbased',
@creation_script = null,
@description = 'two_way_dbtest1 table data will be replicated to two_way_dbtest2',
@pre_creation_cmd = N'drop',
@schema_option = 0x00000000000000F1,
@status = 16,
@vertical_partition = N'false',
@ins_cmd = N'CALL sp_ins_two_way_dbtest1',
@del_cmd = N'CALL sp_del_two_way_dbtest1',
@upd_cmd = N'CALL sp_upd_two_way_dbtest1',
@filter = null,
@sync_object = null,
@identityrangemanagementoption = 'manual'
go
/*In this scenario, the dbtest1 database is the central subscriber.
Create transactional subscriptions in the dbtest2 database that subscribe to the publication at dbtest1
and in the dbtest1 database that subscribe to the publication at dbtest2
*/
--Create all the subscriptions with the LOOPBACK_DETECTION option enabled
--Adding the transactional subscription in dbtest1.
USE dbtest1
go
EXEC sp_addsubscription
@publication = N'two_way_pub_dbtest1',
@article = N'all',
@subscriber = 'Station2SQL2005',
@destination_db = N'dbtest2',
@sync_type = N'none',
@status = N'active',
@update_mode = N'sync tran',
@loopback_detection = 'true'
go
EXEC sp_addpushsubscription_agent
@publication = N'two_way_pub_dbtest1',
@subscriber = 'Station2SQL2005',
@subscriber_db = N'dbtest2'
go
For Station2:
--Create database named test1
IF EXISTS(SELECT * FROM sys.databases WHERE name = 'dbtest2')
DROP DATABASE dbtest2
go
CREATE DATABASE dbtest2
go
--Create table named two_way_dbtest1 that have an IDENTITY column with the NOT FOR REPLICATION option set
USE dbtest2
go
IF EXISTS (SELECT * FROM sysobjects WHERE name LIKE 'two_way_dbtest2')
DROP TABLE two_way_dbtest2;
GO
CREATE TABLE two_way_dbtest2
(
pkcol INTEGER PRIMARY KEY NOT NULL,
intcol INTEGER IDENTITY(1,1) NOT FOR REPLICATION,
charcol CHAR(100),
timestampcol TIMESTAMP
)
/*Allocate a predetermined range of values to the primary key column
so that the values on the different servers are not in the same range.
For example, you can enforce 1-1000 as the key range for the two_way_dbtest1 table in the dbtest1 database,
and then enforce 1001 -2000 as the key range for two_way_dbtest2 table in the dbtest2 database.
To do so, use the following code:
*/
-- Constraint to enforce a range of values between 1 and 1000 in database dbtest1
USE dbtest2
go
ALTER TABLE
two_way_dbtest2
WITH NOCHECK
ADD CONSTRAINT
checkprimcol CHECK NOT FOR REPLICATION
(
pkcol BETWEEN 1 AND 1000
)
go
--Enable your server as the distributor, and then create a distribution database
--Ensure SQL Server Agent service is running before executing the below statement.
USE master
go
EXEC sp_adddistributor
@distributor = 'Station2SQL2005'
go
--create a distribution database for the distributor
USE master
go
sp_adddistributiondb @database='distribution'
go
--Enable the computers running SQL Server that are participating in the replication as publishers
USE master
go
exec sp_adddistpublisher
@publisher = 'Station2SQL2005',
@distribution_db ='distribution',
@security_mode = 0,
@login = 'xxxxxxxxx',
@password = 'xxxxxxx',
@working_directory ='E:ReplicationWorking Directory'
--Enable the identified databases for replication
USE master
go
exec sp_replicationdboption N'dbtest2', N'publish', true
go
--Create the custom stored procedures in the dbtest1 database
USE dbtest2
go
-- INSERT Stored Procedure
CREATE PROCEDURE sp_ins_two_way_dbtest2
@pkcol int,
@intcol int,
@charcol char(100),
@timestampcol timestamp,
@rowidcol uniqueidentifier
AS
INSERT INTO two_way_dbtest2
(
pkcol,
intcol,
charcol
)
VALUES
(
@pkcol,
@intcol,
@charcol
)
go
--UPDATE Stored Procedure
CREATE PROCEDURE sp_upd_two_way_dbtest2
@pkcol int,
@intcol int,
@charcol char(100),
@timestampcol timestamp,
@rowidcol uniqueidentifier,
@old_pkcol int
as
DECLARE @x int
DECLARE @y int
DECLARE @z char(100)
SELECT
@x=pkcol,
@y=intcol,
@z=charcol
FROM
two_way_dbtest2
WHERE
pkcol = @pkcol
DELETE
two_way_dbtest2
WHERE
pkcol=@pkcol
INSERT INTO two_way_dbtest2
(
pkcol,
intcol,
charcol
)
VALUES
(
CASE ISNULL(@pkcol,0) WHEN 0 THEN @x ELSE @pkcol END,
CASE ISNULL(@intcol,0) WHEN 0 THEN @y ELSE @intcol END,
CASE ISNULL(@charcol,'N') WHEN 'N' THEN @z ELSE @charcol END
)
go
-- DELETE Stored Procedure
CREATE PROCEDURE sp_del_two_way_dbtest2
@old_pkcol int
AS
DELETE
two_way_dbtest2
WHERE
pkcol = @old_pkcol
go
--Create a transactional publication, and then add articles to the publication in both the dbtest1 and the dbtest2 databases
--In the database dbtest1.
USE dbtest2
go
-- Adding the transactional publication.
EXEC sp_addpublication
@publication = N'two_way_pub_dbtest2',
@restricted = N'false',
@sync_method = N'native',
@repl_freq = N'continuous',
@description = N'Transactional publication for database dbtest2.',
@status = N'active',
@allow_push = N'true',
@allow_pull = N'true',
@allow_anonymous = N'false',
@enabled_for_internet = N'false',
@independent_agent = N'false',
@immediate_sync = N'false',
@allow_sync_tran = N'true',
@autogen_sync_procs = N'true',
--To avoid expiry if there are 5 continuous holidays for a company. If 0, well-known subscriptions
--to the publication will never expire and be removed by the Expired Subscription Cleanup Agent.
@retention = 120
go
EXEC sp_addpublication_snapshot
@publication = N'two_way_pub_dbtest2',
@frequency_type = 4,
@frequency_interval = 1,
@frequency_relative_interval = 0,
@frequency_recurrence_factor = 1,
@frequency_subday = 2,
@frequency_subday_interval = 10,
@active_start_date = 20080225,
@active_end_date = 99991231,
@active_start_time_of_day = 070000,
@active_end_time_of_day = 235959
go
-- Adding the transactional articles.
EXEC sp_addarticle
@publication = N'two_way_pub_dbtest2',
@article = N'two_way_dbtest2',
@source_owner = N'dbo',
@source_object = N'two_way_dbtest2',
@destination_table = N'two_way_dbtest1',
@type = N'logbased',
@creation_script = null,
@description = 'two_way_dbtest2 table data will be replicated to two_way_dbtest1',
@pre_creation_cmd = N'drop',
@schema_option = 0x00000000000000F1,
@status = 16,
@vertical_partition = N'false',
@ins_cmd = N'CALL sp_ins_two_way_dbtest2',
@del_cmd = N'CALL sp_del_two_way_dbtest2',
@upd_cmd = N'CALL sp_upd_two_way_dbtest2',
@filter = null,
@sync_object = null,
@identityrangemanagementoption = 'manual'
go
/*In this scenario, the dbtest1 database is the central subscriber.
Create transactional subscriptions in the dbtest2 database that subscribe to the publication at dbtest1
and in the dbtest1 database that subscribe to the publication at dbtest2
*/
--Create all the subscriptions with the LOOPBACK_DETECTION option enabled
--Adding the transactional subscription in dbtest1.
USE dbtest2
go
EXEC sp_addsubscription
@publication = N'two_way_pub_dbtest2',
@article = N'all',
@subscriber = 'Station1SQL2005',
@destination_db = N'dbtest1',
@sync_type = N'none',
@status = N'active',
@update_mode = N'sync tran',
@loopback_detection = 'true'
go
EXEC sp_addpushsubscription_agent
@publication = N'two_way_pub_dbtest2',
@subscriber = 'Station1SQL2005',
@subscriber_db = N'dbtest1'
go
---*************************************************************************************************
It would be grateful if somebody gives me a solution.
Thanks in advance.
Ravi.
Hi,
I read that views can't be published with SQL Server 2005 replication. Is this planned for the future? If not what alternatives are there for this?
Simple collecting the data needed in a new table ain't a solution for us (memory consuming). And joining the data on the PPC ain't a good solution either (memory and time consuming). We only want to pull the data.
Greets,
Ivo Klerkx
Greetings...
Presently, I am doing one way replication in SQL Server 2005. Server-A is local server at local place and Server-B is remote server at different place. There is not a problem in one way replication.
Server-A is Distributor and Server-B is Subscriber in one way replication.
I want to setup the following configuration using bidirectional replication (two way replication) on SQL Server 2005
And I am not able to do it. What should I do for this?
Should I use Merge Replication for bidirectional Replication.
Server-B is live server for users which cannot be stop for a moment. Server-A is local server which is live too.
Now please let me know how to do Bidirectional Replication. So whatever data in Server-B (Which is live) should replicate to Server-A or Vice versa ...
If we add some column into Server-B's table of Database what could be the effect on Server-A...
Please someone help me out into this.
ThanksRicky
Hello All,
I created all the role and logins as described in oracleadmin.sql file and were able to query Oracle tables.
But when I try to crate publisher on Oracle server from sqL server I get the following error:
-------------------------------------------------------------------------------------------------------------------------------
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server+Management+Studio&ProdVer=9.00.3186.00&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'oracle_dev' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Failed to execute the HREPL.INITPUBLISHER request to Oracle Publisher 'ORACLE_DEV'. Verify that the Oracle package code exists on the Publisher, and that the replication administrative user account has sufficient permissions.
Changed database context to 'master'.
OLE DB provider "MSDAORA" for linked server "ORACLE_DEV" returned message "One or more errors occurred during processing of command.".
OLE DB provider "MSDAORA" for linked server "ORACLE_DEV" returned message "ORA-06550: line 1, column 8:
PLS-00201: identifier 'HREPL.INITPUBLISHER' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
".
Error: 7215, Sev: 17, State: 1, Msg: Could not execute statement on remote server 'ORACLE_DEV'. (Microsoft SQL Server, Error: 21651)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3186&EvtSrc=MSSQLServer&EvtID=21651&LinkId=20476
--------------------------------------------------------------------------------------------------------------------------------------------------------
I searched the web and could not find any related info, where is this package can I run it manually?
Any help appreciated.
HI..
View 1 Replies View RelatedWe are trying to set up the Sql Server CE Server Tools on our Web Server and most of the MSDN support items assume that Sql 2005 is installed on the same PC. However, our Sql 2005 database is stored on a dedicated server off site. When we run the Sql CE ST installation we are tols we cannot sync with Sql 2005 until we install the Replication Components. It seems we cannot download them and they can only be located on the Sql 2005 install CD. Is there another way around this as the Sql SP3a and SP4 dont solve the problem and without having to arrange a courier for the CD we cannot seem to move forward.
View 1 Replies View Related we have the standard licensed copy for sql server 2005
while configure transaction replication not allow to move
message is required licesence for replication again i have to get license for
replication
please advice
Hi there
im trying to set up a replication from a local server to a remote server.
when starting up and selecting the Distribution / publisher, i get the following errors --->
Details as followed...
TITLE: New Publication Wizard
------------------------------
SQL Server is unable to connect to server 'SERVERX'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
and...
===================================
SQL Server is unable to connect to server 'SERVERX'. (New Publication Wizard)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
===================================
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.CheckServerAlias(ServerConnection conn)
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.Open()
at Microsoft.SqlServer.Management.UI.CreatePublicationWizard.PrepareToShow()
Dear all
I have a problem that about the Replication of the SQL SERVER 2005. If there are a hundred data in the delivery of replication ,after they transmited fifty data ,somebody
want to read the data in the transmited fifty data that has delivery successfully,but the replication delivery hasn't finished,and could he can read the data successfully?
In the delivery process of the replication,could the table in the subscription will be
lock?And can we oprate the table in the subscription in the delivery process of the replication ?
Thank you.
Hi,
I've been trying to get my merge replication to work with a sql ce 2.0 on
sql server 2005, but it keeps generating shapshot scripts my pocket pc can't
execute.
Example of my table.sch file in my snapshot folder:
drop Table [dbo].[Application]
go
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Application](
[AppID] [nvarchar](20) NOT NULL,
[AddOnInfo] [nvarchar](50) NULL,
[MaxClients] [int] NULL,
[AppName] [nvarchar](255) NULL,
[NbrDaysHistory] [int] NOT NULL CONSTRAINT [DF_Application_NbrDaysHistory]
DEFAULT (10),
[NbrDaysFuture] [int] NOT NULL CONSTRAINT [DF_Application_NbrDaysFuture]
DEFAULT (10),
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT
[DF__Applicati__rowgu__4C364F0E] DEFAULT (newid())
)
GO
SET ANSI_NULLS ON
go
SET QUOTED_IDENTIFIER ON
go
ALTER TABLE [dbo].[Application] ADD CONSTRAINT [Application_PK] PRIMARY KEY
CLUSTERED
(
[AppID]
)
GO
I've selected that I was setting up a merge replication that needs to be
compatible with sql ce. But it doesn't seem to do this...
I've tried to set the compatibility level to 80SP3 manually but it remains
80RTM...
I've tried everything.....
Does anyone have any ideas what could be causing this?
If I remove these lines from the sch file everything works jsut fine:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
go
SET QUOTED_IDENTIFIER ON
go
ALTER TABLE [dbo].[Application] ADD CONSTRAINT [Application_PK] PRIMARY KEY
CLUSTERED
(
[AppID]
)
GO
Even if I make a publication for sql mobile 2005 it generates the same
script.... It's almost as if SQL 2005 is ignoring my settings...
Thanks,
Desperate Natasja
Hello,
I am facing problems trying to replicate SQL Server 2000 table to SQL 2005 Express. The error says:
"login failed for user 'username'. The user is not associated with a trusted SQL server connection"
PS:
The same happens when I try to register the SQL 2005 server in SQL 2000 Enterprise Manager.
Any help?
Thanks
Walid
Hi,
I am experiencing a problem with deployment of a VB .Net application which carries out merge replication, and would greatly appreciate any assistance. I am currently struggling to find stuff about my problem on the net, which probably means either (a) I'm missing something really simple or (b) I shouldn't be trying to do this in the first place. :)
The story so far:
1. I added the SQLMergXLib.dll COM to my Visual Studio project, allowing me access to SQL Server merge replication functionality from my code, and wrote a procedure for synchronising a given pull subscription. This worked beautifully and with minimal fuss.
2. I tried to deploy the project to a different machine. I received an error to the effect of, "Couldn't create object, it's a COM object and it's not registered correctly." I have encountered this problem a few times before when trying to use Interop, so I called myself a few names, went back to the deployment project, and specified that the object should be registered. Still no joy. I tried this a couple of different ways round but then...
3. ...found an article on MSDN suggesting that I should consider using the managed Microsoft.SqlServer.Replication, Microsoft.SqlServer.Management, Microsoft.SqlServer.RMO interfaces instead. I reasoned that this would eliminate the registry issue altogether as everything would become native to the .Net framework, and this seemed infinitely preferable anyway, so I promptly substituted the SQLMergX DLL for these, rehashing my code to match. Again, this built and ran OK on my development machine.
4. I tried to deploy the project to a different machine. I received the following error: "Could not load file or assembly 'Microsoft.SqlServer.Replication, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. This application has failed to start because the application configuration is incorrect."
Now it's worth pointing out that I think I know what the problem might be here: No SQL Server of any kind is installed on the target machine. However, SQL Server is not required to deploy standard database solutions in .Net, and I am hoping this is also true with the Microsoft.SqlServer... namespaces, as it is a requirement that the subscription database can be located anywhere (not necessarily the target machine), and therefore that SQL Server need not be present on the target machine. However, if this is simply impossible, please let me know so that I can look at other alternatives.
Other than that, I don't mind what method I use to get the synchronisation working as long as it works (I've been at this a good few days now...), so if anyone has done this before and can offer any assistance (any registering/files I need to include etc, I am hoping it is something that simple), it would be appreciated.
Thanks,
Steve.
Hello,
I've
been trying to convert an application to use the CF 2.0, and of course
to SQL Server Mobile. There have been some kinks along the road, but
I've worked all of them out except an error on replication. When I call
the SqlCeReplication's Synchronize() method, the connection goes fine,
it works for about 20-30 seconds, and then comes up with the following
error:
Error code: 0x80004005
Message: The data types cannot be converted implicitly. [ Source data type = nvarchar,Destination data type = image ]
Native error: 25932
Source: Microsoft SQL Server 2005 Mobile Edition
Error Param: nvarchar
Error Param: image
I've
tried upgrading from SQL Server 2000 to 2005 to see if that helped, but
got the same result. I even tried running this from a fresh install of
SQL Server 2005, hoping that'd integrate better with SQL Server Mobile, but that didn't help either.
I found a knowledge base article about error code 0x80004005:
http://support.microsoft.com/kb/912428
However, none of my tables are even remotely close to having 127 columns, so that can't be it.
I
do have an image data type column in one of my tables, but why is a
column being converted from nvarchar to image? Both SQL Server 2005 and
SQL Server Mobile support the image data type, so I don't
understand how that could be causing a problem in the first case.
Any ideas? I've run out of things to try and would appreciate any feedback.
Thanks,
Adrien.
Error information:
NativeError: 28549
HRESULT: -2147217873
Message: OrdersHeader,Delete,{0503BF00-BB05-11C6-8000-36BC4ADEE342}
Description: The row update or insert cannot be reapplied due to an integrity violation.
Server side: SQL Server 2000 or MSDE
Client side: SQL Server CE or SQL Mobile
This error is usually caused because of an error on the filters. But not in this case, i think.
I assume it's not a filter error because if I delete the SDF and run the sync it works.
The error occurs when I delete some rows in the server (parent(OrdersHeader) and child(OrderLines) tables) and the PocketPC stills have this rows.
On the next synchronization It seems that replication process tries to delete the OrdersHeader rows before the OrderLines rows.
Is there any way to control the synchronization updating order? Or Is there any know issue about this?
It doesn't occur always but it occurs often. And I still haven't found the way to replicate the error.