When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Good day good people of the forum while carrying out a remote installation i encountered an UNC path error can anyone be of help giving me a comprehensive answer to the problem. am stuck i cant move ahead from that part of the installation
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
how to properly use the "For XML Path" code to concatenate multiple values into one record. What I have is a procedure I've written for a SSRS report that summarizes drive information: date, account, recruiter, times.But each drive can have multiple shifts, and each shift will have it's own vehicle assigned. So a drive may have 1 vehicle assigned to it or it may have 5. If there are 5 shifts/5 vehicles, I don't want to the report to display 5 rows of data for the one drive. So I'm trying to get all of the vehicles to be placed into one field for the report.My initial sub-query will not work because it is possible that it will contain more than one item (vehicle):
Select DM.DriveID [DriveID], DM.FromDateTime [FromDateTime], DSD.ShiftID [ShiftID], Case When DM.OpenToPublic = 1 Then 'Yes' Else 'No' End As [OpenToPublic], Case When DM.OwnerType=0 Then 'Mobile' Else 'Fixed' End As [OwnerType], Case When DM.OwnerType = 0 Then Acct.Name Else CD.DescLong End As [OwnerName],
[code]...
SQL Server Newbie or here either. I'm a newbie as well.
I have some T-SQL that generates HTML code by using the FOR XML PATH functionality. Once the HTML is built, I am using the following T-SQL to convert it to XML so I am not limited by the output
SELECT @vHTML AS [processing-instruction(x)] FOR XML PATH('')
where @vHTML is varchar(MAX)
Now, when I run my code in VB.NET and use the ExecuteXMLReader() command, I get nothing back into the XML Reader. I noticed that I needed the XMLDATA directive also, but when I add it, I get the following error
Msg 6860, Level 16, State 1, Line 247 FOR XML directive XMLDATA is not allowed with ROOT directive or row tag name specified.
I have created a package that works just fine from my desktop. I am now testing it by deploying it to the server. The task was imported into the "File System" store. I connected to the SQL Server, from my desktop, with SSMS. I right clicked the package and selected "Execute" If I just validate the task, it validates without errors. When I go to run the task I get a "Access to the path is denied" error at the start of the first file system task. I am sure it is a permission issue. Based on the info from another thread in the forum:
"Security to network shares is dependent on the user who is running the package. If you are running it yourself, make sure you have permissions to the share. If you are running it from SQL Agent, you might need to use a proxy account (search for SQL Agent Proxy in Books Online) to access it."
I have some questions:
1. When I select "execute" what account is SQL Server using for permissions for accessing network folders? Is it mine, SQL Server Agent, something else? If it is my account, why would I get an "Access to the path is denied" error?
2. I don't understand how to use a proxy account, or even if I need one. I assume that when I set the task for scheduling I'll need one. I read the BOL pages, but I'm still confused as to what I need to set up.
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
hi experts, i'm working in building new reports from an existing database. the report i'm working in is to save the path of the visitor through a web site(this is neede for the statistics web site), i have the siteId, commid, maintab, subtab. the site id is dtored in site table, maintab and subtab are stored in article(they are mixed in one columns called title) i have also sessionid stored in session table. i want a query that show the flow of the visitor through a web site, which tab he clicked first then second tab then third tab and in this tab he clicked subtab and the last tab he clicked on before leaving the web page. is this possible and if not, what are the other approches that can i make to get the report i want. also i want to ask if it is possible to create the report where it will show you the visitors for the first time and the returned visitors. thanks
I need someone that knows something about SQL queries.
I have a client that is running a Database known as ProLaw. It is in part a document management system for Law Offices.
They have an SQL 2005 database that tracks per client all the documents they create.
We had to replace there server with new server. The new server is running sbs2003 and had to have a different Netbios name then the old sbs2000 server. (Small Bus. Server has some weird quirks that make simply using the same netbios name impossible. Google search it if you don't believe me.)
The database holds in a single column the full network share path to each document.
Different documents may have different names and more subdirectories but the root path of "\lawwillsbs2000ProlawDocuments" is shared by all.
The new server is named \sbs2003 I need to change the first part of almost 3000 path statements to the new server. The rest of the path is unchanged.
I have had several people running prolaw tell me that I should run this query:
UPDATE Events
SET DocDir=REPLACE(DocDir, '\\lawwillsbs2000', '\\sbs2003')
WHERE EventKind='O'
This doesn't work. Nothing is changed. I'm guessing it is because this query assumes the value will be ONLY \lawwillsbs2000 I see nothing in here that tells the query that this is only part of the string. No wild card or other marker.
I need some kind of string function here do I not? Anyone know enough to help me craft a proper query?
I wrote a simple sql query to get the shortest path length from node 1 to all the other nodes. Since there's a loop in the graph, I want to prevent it from going back to some nodes it has expanded before.
I got the following error:
Msg 253, Level 16, State 1, Line 2 Recursive member of a common table expression 'CTE_Sample' has multiple recursive references.
It is referring to "and Table1.t NOT IN (select fr from CTE_Sample)"
Can somebody help me to solve it?
btw. How to use the UNION, EXCEPT or INTERSECT operators when doing the recursive join? It seems I must use UNION ALL.
WITH CTE_Sample (fr, t, level) AS ( SELECT Table1.fr, Table1.t, 1 AS level FROM Table1 WHERE fr=1 UNION ALL SELECT Table1.fr, Table1.t, level+1 FROM Table1 INNER JOIN CTE_Sample ON Table1.fr = CTE_Sample.t and Table1.t NOT IN (select fr from CTE_Sample) ) SELECT CTE_Sample.t, min(CTE_Sample.level) FROM CTE_Sample group by CTE_Sample.t
I am trying to set up a SSIS package which uses a FTP task to download some files. In the FTP task editor I have the filename setup as an RemotePath expression. If I do not put a / at the start of the file name generated I get the following error:
[FTP Task] Error: Remote path "test.csv" doesn't start with "/".
If I then place a / infront of the name then then I get an error saying the file does not exist
[FTP Task] Error: File represented by "/test.csv" does not exist.
In both cases I have the DelayValidation property set to true.
However if I log on to the ftp server manually using windows or command prompt the file exists and can be downloaded from the default folder you log into.
I would appriciate any light anyone could shed on this problem.
I am getting this error, when I try to access a directory in the remote path. Though the directory exists, I get this error. 550 CWD CMD FAILED : EDC5129I NO SUCH FILE OR DIRECTORY.
When I try to access through the remote login, I am able to see the directory as well as the files there. How to overcome this error. Is there any workaround for this. Thanks.
Hi all. Here's my problem: I have a tree linking macaddresses (bigints)in a tree structure. i want to get the path from node a to b.create table tree1(father bigint , child bigint);insert into tree1 (father,child) values (100,200);insert into tree1 (father,child) values (100,300);insert into tree1 (father,child) values (100,400);insert into tree1 (father,child) values (200,2000);insert into tree1 (father,child) values (200,3000);insert into tree1 (father,child) values (100,4000);insert into tree1 (father,child) values (2000,11111);you can see that 100 --> 200 --> 2000 --> 11111select * from tree1what i would like is a query that given two parameters returns the pathbetweenthem, in the case of 100,11111 i want to get100200200011111if possible as different rows, but columns will do to.of course i do not know the legnth of the path. it can be very bigthx in advanceTzvika
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
Below is the test data and my query. Basically i am trying to get the File records along with if any error messages occurred. I am getting the output as expected but the message column has "," at the front and sometime at the end of the column. How do i avoid that.
declare @Files table (ID int identity(1,1) primary key,Filename varchar(50),Date_Created datetime) insert into @Files (Filename,Date_Created) select 'File1',GETDATE()-1 union all select 'File2',GETDATE()-1 union all select 'File3',GETDATE()-1 union all
I am trying to access my SQL Server database through SqlCeConnection:
cecon = new SqlCeConnection("Data Source=D:\D_Drive\csharppract\nddbpda\nddbpda\nddbpdadatabase.sdf");
cecon.Open();
I am getting the following error:
System.Data.SqlServerCe.SqlCeException was unhandled Message="The path is not valid. Check the directory for the database. [ Path = D:\D_Drive\csharppract\nddbpda\nddbpda\nddbpdadatabase.sdf ]" HResult=-2147467259 NativeError=25009 Source="SQL Server 2005 Mobile Edition ADO.NET Data Provider" StackTrace: at System.Data.SqlServerCe.SqlCeConnection.ProcessResults() at System.Data.SqlServerCe.SqlCeConnection.Open() at System.Data.SqlServerCe.SqlCeConnection.Open() at nddbpda.frmCeMain.frmCeMain_Load() at System.Windows.Forms.Form.OnLoad() at System.Windows.Forms.Form._SetVisibleNotify() at System.Windows.Forms.Control.set_Visible() at System.Windows.Forms.Application.Run() at nddbpda.Program.Main()
When I tried to get the path from which the database file is being accepted, I got a different path:
I am trying to access my SQL Server database through SqlCeConnection:
cecon = new SqlCeConnection("Data Source=D:\D_Drive\csharppract\nddbpda\nddbpda\nddbpdadatabase.sdf"); cecon.Open();
I am getting the following error:
System.Data.SqlServerCe.SqlCeException was unhandled Message="The path is not valid. Check the directory for the database. [ Path = D:\D_Drive\csharppract\nddbpda\nddbpda\nddbpdadatabase.sdf ]" HResult=-2147467259 NativeError=25009 Source="SQL Server 2005 Mobile Edition ADO.NET Data Provider" StackTrace: at System.Data.SqlServerCe.SqlCeConnection.ProcessResults() at System.Data.SqlServerCe.SqlCeConnection.Open() at System.Data.SqlServerCe.SqlCeConnection.Open() at nddbpda.frmCeMain.frmCeMain_Load() at System.Windows.Forms.Form.OnLoad() at System.Windows.Forms.Form._SetVisibleNotify() at System.Windows.Forms.Control.set_Visible() at System.Windows.Forms.Application.Run() at nddbpda.Program.Main()
When I tried to get the path from which the database file is being accepted, I got a different path:
I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf, Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf, One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
I'm trying to let certain users execute an SSIS package through an SP in SQL.
I've set up a proxy account for xp_cmdshell that the other users will use to execute dtexec with, but i get this message:
Could not load package "File SystemCODA_Actuals" because of error 0x80070005. Description: Access to the path 'C:Program FilesMicrosoft SQL Server90DTSPackagesCODA_Actuals.dtsx' is denied.
When i log onto the server with the proxy account, i can navigate to that folder and open the package.
When try to execute it from the command shell: dtexec /DTS "File SystemCODA_Actuals" /Decrypt "password" /Reporting E /SET Package.Variables[User::JobId].Value;25'
i get the same message. How come? How do i fix this? I've read somewhere that i should grant read to the package store to that user , how do i do that? Can't find that option in the tools or manuals.
I installed SQL Server 2005 Express Edition on my Laptop for use with IIS 7.0; Everything was working fine untill I opened the Report Server Site with WVD 2008, it asked me to Modify the web.config for debugging. After doing that the Report Server Site started showing an error page saying there was a rsInternal error. I tried fixing the Web.config by hand but it dident work, so I tried completly reinstalling the SQL Server 2005 Express Edition. It reinstalled perfectly excluding the Report Server. When it came time to install the Report Server; I got the error message.
The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
--Actual Log--
Microsoft SQL Server 2005 9.00.3042.00 ============================== OS Version : Professional Service Pack 1 (Build 6001) Time : Mon Apr 14 04:41:42 2008
Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.3042.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_1.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_OWC11_1.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.2004 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_BackwardsCompat_1.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.3042.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_2.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server Native Client Product Version : 9.00.3042.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLNCLI_1.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server VSS Writer Product Version : 9.00.3042.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SqlWriter_1.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server 2005 Product Version : 9.2.3042.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQL.log ----------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Reporting Services Error : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation. ---------------------------------------------------------------------------- Machine : JEOSYSTEMS-0002 Product : Microsoft SQL Server 2005 Reporting Services Product Version : 9.2.3042.00 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_RS.log Last Action : InstallFinalize Error String : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation. Error Number : 29528 -----------------------------------------------------------------------------
If anyone knows how to get Report Services to install after Error number 29528 occurs, Please let me know. Thanks.
The development environment & the SQL Box are two different boxes.
I am trying to create a simple application where I want to synchronize data between Pocket PC application's ( Emulator) local database(SQL Mobile) to SQL 2005 Database. I have tried the steps outlined in the following link
Once I have completed all the steps as per the steps in the above link, I have copied the .sdf file to an another machine where I have the development environment. I have created a device application in VS 2005 and created a datasource poiting to the file (.sdf) copied locally.
Then I have added the following code string filename = @"e:VelsunMobileTest.sdf";
if (VelsunMobileTestDataSetUtil.DesignerUtil.IsRunTime()) { // TODO: Delete this line of code to remove the default AutoFill for 'velsunMobileTestDataSet.Customers'. this.customersTableAdapter.Fill(this.velsunMobileTestDataSet.Customers); }
}
private void DeleteDB() { if (System.IO.File.Exists(filename)) { System.IO.File.Delete(filename); } }
private void Sync() { SqlCeReplication repl = new SqlCeReplication();
I got this error message during SQL Server Express install with no error code on Server 2003 SP1. I'm installing on an older development machine and although I do have a very large log file somewhere I wanted to post before I even dug into it. I noticed in IIS under my Webs that the MSSQLExpress webs were there at first but when I clicked on them to get any info or Properties... they dissapeared. So they were almost installed but they no longer exist. Also I do not have a SQL Service Manager icon down near the clock.
I almost took a step to fix this. After reading a few posts about similar problems I thought maybe this happened because the Default Web Sites IP # was not set to (All Unassigned). I was going to try a repair install from Add/Remove Programs but the temporary setup files are already gone. I really dont want to uninstall all 5 SQL components from Add/Remove Programs and start from scratch.
As good security practice we usually remove the Default Web or as in this development servers case we changed the IP from (All Unassigned) to an IP that is only accessible from certain machines on the internal network. I obviously should have read more pre setup guides. Anyway how can I fix this without reinstalling everything?
I've been working on an SSIS package trying to load some data and the archive sequence is faulty. I've been trying to load a few tables created in a previous sequence into a local archive file and I've been getting the error "Could not find a part of the path."
The results aren't telling me what it's finding last and so I don't know where to start.
And the source DOES have data in it. It's something between the source and the destination.
SET @QUERY = "INSERT INTO tblDocTable(FileName, FileType, ImportExportID, BuildingID, Document)
SELECT '"+@fName+"' AS FileName, '"+@fType+"' AS FileType, " + cast(@fID as nvarchar(18)) + " as ImportExportID, '"+@bID+"' AS BuildingID, * FROM OPENROWSET( BULK '" +@fPath+"' ,SINGLE_BLOB)
AS Document"
EXEC (@QUERY)
This puts some values including a pdf or .doc file into a table, tblDocTable.
Is it possible to change this so that I can get the values from a table rather than as parameters. The Query would be in the form of: insert into tblDocTable (a, b, c, d) select a,b,c,d from tblimportExport.
tblImportExport has the path for the document (DocPath) so I would subsitute that field, ie. DocPath, for the @fPath variable.
Otherwise I can see only doing a Fetch next from tblIportExport where I would put every field into a variable and then run this exec query on these. Thus looping thru every row in tblImportExport.
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
When I am trying to read rows from any table from any database in the offsite production server with Pc Anywhere ( all other servers can be acess fine with pc anywhere
I get this error
An unexpected error happned during this operation {query} query designer error encountered a query error unexpected error
I checked the version of Enterprise manager Help About microsoft managment console 1.1version 4.0 bulid 1381 service pack 4
