Error In Master Db
May 22, 2006Hi Gurus
Sorry to rake up this issue again.we repaired this master by dbcc checkdb and now it is fine.What is this going on?do i have the chance that this willstillgodown as mentioned by paul .
Regards
Nitin
ADVERTISEMENT
Rebuild Master Error
Jan 8, 2004I am performing a Rebiuld of the Master database using the REBUILDM utility on a SQL 2000 SP3 database which is clustered.
The utility starts off correclty, copying the correct MDF and LDF files to the hard drive, and the configuration bar goes across the screen 4 times, before giving the following error "Rebuild master failed with error -1".
I can't find anything on microsoft. I followed KB-298568 to perform this process, but the SQL Service will now not start as it cannot find the master, as it did not get rebuilt properly.
I have included screen shots of the error, in the zipped up word doc.
Error In Master Db(checkdb)
May 15, 2006Gurus
when i run checkdb i get this error
"Database 'master' consistency errors in sysobjects, sysindexes, syscolumns, or systypes prevent further CHECKDB processing."
What can be the cause?Can i fix this with repair option of check db?
Please advice
Regards
Nitin
Master..xp_cmdshell Error
Aug 28, 2007I keep getting a "Incorrect syntax error near ' -Q''' " which is at the end of my xp_cmdshell line. What am I doing wrong?
CREATE Procedure dbo.sp_ImportRawData
(@ClientAbbrev nchar(4), @FileDate nvarchar(8), @SessionId nvarchar(50) )
AS
DECLARE @Msg varchar(255)
DECLARE @DataUpdates nvarchar(255)
DECLARE @Common nvarchar(255)
DECLARE @UServer nvarchar(255)
DECLARE @FullFileName nvarchar(68)
DECLARE @FileName nvarchar(64)
DECLARE @FileExt nvarchar(3)
DECLARE @SQL varchar(3500)
DECLARE @triFileName nvarchar(255)
Declare @Ip_FileName nvarchar(255)
Declare @Ip_Active char(1)
select @UServer = sd_value from Msysdata Where SD_Property = 'UpDateServer'
select @Common = sd_value from Msysdata WHERE SD_Property = 'CommonDir'
select @DataUpdates = sd_Value from Msysdata WHERE SD_Property = 'DataUpdate'
Set @UServer = @UServer + 'D$'
SET @Msg = 'Truncate tri_ active files'
EXEC MARS_SYS.dbo.sp_WriteLog @ClientAbbrev, 'UpdateMgr', @Msg, @FileDate, @SessionId
Declare ActiveFile Cursor For
Select Ip_FileName, Ip_Active from tbl_InputFiles
where Ip_Active = 'Y'
Open ActiveFile
Fetch Next From ActiveFile
Into @Ip_FileName, @Ip_Active
While @@Fetch_Status = 0
Begin
Exec('truncate table tri_'+ @Ip_FileName)
Set @FullFileName = @Ip_Filename + '.csv'
set @UServer = ''
set @Common = ''
set @triFileName = 'tri_' + @Ip_FileName
set @sql = 'master..xp_cmdshell ''' + @UServer + @Common + 'd:mars_syscommonscriptsodbcbcp -D CopyMedMgr10_Testing -i D:mars_sysdataupdatesccbm' + @FullFileName + ' -Q''' + @triFileName
exec(@SQL)
Fetch Next From ActiveFile
Into @Ip_FileName, @Ip_Active
End
CLOSE ActiveFile
DEALLOCATE ActiveFile
Database Master Key Error
Apr 22, 2006Hi,
In sys.transmission_queue is showing the transmission_status with error. "The session keys for this conversation could not be created or accessed. The database master key is required for this operation."
But I do have a Master Key in the database, and many External Assemblies depend on that. Is there an option to use the existing master key. How to use the existing key ?
Thanks in advance.
Regards
Babu
Rebuild Master? Error 9003
Oct 8, 1999I copied the master's .ldf from Node 2. Now I get this error:
1999-10-08 16:46:22.52 kernel Attempting to initialize Distributed Transaction Coordinator.
1999-10-08 16:46:25.93 spid1 Starting up database 'master'.
1999-10-08 16:46:25.93 spid1 Opening file g:MSSQL7datamaster.mdf.
1999-10-08 16:46:25.93 spid1 Opening file g:MSSQL7datamastlog.ldf.
1999-10-08 16:46:25.95 spid1 Loading SQL Server's Unicode collation.
1999-10-08 16:46:25.96 spid1 Loading SQL Server's non-Unicode sort order and character set.
1999-10-08 16:46:25.99 spid1 Error: 9003, Severity: 20, State: 1.
1999-10-08 16:46:25.99 spid1 Cannot recover the master database. Exiting.
Looks like I'm screwed. Next problem - can you rebuild the master.mdf without the mastlog.ldf and how? Also, on an active/active SQL server setup, how would you re-install Node 1?
Help!
Mark Lowe
Error While Moving Master Database
Dec 14, 2007Hi ,
I am trying to move the system database master database and mssqlresource database on SQL Server 2005.
I am going according to the doc's . And I am logging in as single user mode : NET START MSSQLSERVER /f /T3608 and when I try to login into sqlcmd or Management studio , I get the error:
SQL Error 18461 , can not login in more than one administrator server in single user mode.
For the managment studio , I close the object explorer as it is taken as one connection and click the new query with existing connection. But it throws me the same error. When I try to enter into sqlcmd , it throws me the same error.
What can I do here.. IS there anything I am missing.
Thanks
.
Restore Master Database With SQL 2005 Made An Error With Me
Mar 6, 2007- First I made a full backup of master database
- Then I stopped SQL Server Service
- in cmd: cd C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLBinn
then sqlservr.exe -m
- I entered that single user mode
---> Problem here:
- I tried to connect to sql by sqlcmd -E --->
HResult 0xE9, Level 16, State 1
Shared Memory Provider: No process is on the other end of the pipe.
Sqlcmd: Error: Microsoft SQL Native Client : Communication link failure.
---> I tried to connect to management studio:
TITLE: Connect to Server
------------------------------
Cannot connect to BISHOYSERVER.
------------------------------
ADDITIONAL INFORMATION:
Login failed for user 'OFFICIALPROJECTAdministrator'. Reason: Server is in single user mode. Only one administrator can connect at this time. (Microsoft SQL Server, Error: 18461)
SQL Server 2008 :: Error Occurred During Service Master Key Decryption
Mar 13, 2015I have a SP SQL server that uses Handshake for the web parts. I am getting an error on SharePoint about 'An error occurred during Service Master Key Decryption' inside the web parts of the page, everything else comes up, from what I have researched MS says go under SQL Configuration Manager and change the service account. Is this the correct course of action for this type of error? I am just having a hard time believing that changing the engines service account will stop this issue, this account is used on several SQL server with no issues.
MCSA SQL Server 2012
Setup Was Unable To Load The Master Information File (ERROR)
Jan 17, 2008
I receive this error "Setup was unable to load the master information file' when I lanch Control Panel, Add/Remove Programs, Add/Remove Windows Components.
I was going to add ISS but recieved this error.
Running Windows XP Professional SP2
SQL 2012 :: Importing Packages Into Integration Service Catalog - Master Key Error 15581
Jul 28, 2015I try to import packages into integration service catalog, i am getting the master key error .
" Please create a master key in the database or open the master key in the session before performing the operation (error:15581)""
Version is SQl 2012
Master Data Services :: Error Opening Entities In User Role Management
Apr 27, 2015I am trying the assign the models to the user in the user management page. But when I try to expand the + symbol next to the model and open the entities, I get the error that the object reference is not set for a object server instance.
View 2 Replies View RelatedMaster Information And Details: How Can I Get The Master ID?
Jun 19, 2007I got a File with sales orders and their details.
Step 1. First I am filtering the Sales Order information and inserting it in my Sales Orders table.
Step 2.Then I am filtering the details from the sales Order and inserting them in the respective table.
My Problem is that the Sales Order File does not contain the Sales Order key (ID), this is generated by the SQL Server. How can get it in order to use it in the second step? I need it because it is a foreign key in the details table.
Any Idea?
Master Data Services :: Error - Query Processor Could Not Produce A Query Plan
Jul 19, 2015We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
Master Data Services :: Error Code 8 While Loading Data From MDS Stage To Model
Apr 22, 2015I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.
Create Database Permision Denied In Database ' Master' (MS SQL SERVER, ERROR 262
Feb 17, 2007Cn not do anything with my sql server, everything i trt to do i get this message, user does not have permision, etc, ,
I am running windows Vista Business, SQL SERVER 2005
so what going on here
SQL Master/Detail (Master Query Based On Detail Values)
Mar 25, 2008
Hello,
I'm new to SQL and need help with a query. Not sure if this is the right place.
I have 2 tables, one MASTER and one DETAIL.
The MASTER table has a masterID, name and the DETAIL table has a detailID, masterID, and value columns.
I want to return a populated MASTER table with entries based on the DETAIL.value.
SELECT MASTER.*
FROM MASTER
WHERE DETAIL.value > 3
This is a simplified version of my problem. I can't figure out how to set the relationship between MASTER.masterID and DETAIL.masterID. If I do an INNER JOIN, the number of results are based on the number of DETAIL entries. I only want one entry per MASTER entry.
Hope this makes sense.
How can I do this?
GrkEngineer
CREATE DATABASE Permission Denied In Database 'master'. Error
Feb 1, 2007got rid of my error about user login rights, it was all working yesterday. but for some reason i now get this error CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
i have this in my web.config file <connectionStrings> <add name="ConnectionStringTest" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf;Integrated Security=SSPI;Connect Timeout=30;User Instance=False" providerName="System.Data.SqlClient" /> </connectionStrings> <appSettings /> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="true" /> <identity impersonate="true"/> and my asp connection string is <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionStringTest %>" SelectCommand="SELECT [entryID], [compID], [emailAddy], [answer] FROM [entry]"></asp:SqlDataSource> if i set user instance to true i get a user permission error. it says on sql server management that i have dbo rights on my database, but it wont let me put datareader or write on this login. any ideas? its driving me insane
Master Data Services :: Master Data Services - Data Push Back To Excel Sheet
Nov 2, 2015We already integrated different client data to MDS with MS Excel plugin, now we want to push back updated or new added record to source database. is it possible do using MDS? Do we have any background sync process to which automatically sync data to and from subscriber and MDS?
View 4 Replies View RelatedCant Create New Database / CREATE DATABASE Permission Denied In Database Master (error 262)
Oct 2, 2007
I am using SQL express and Visual web developer on windows Vista.
When I try to create a new database the following message appears.
CREATE DATABASE permission denied in database master (error 262)
I log on to my computer as an administrator.
Help appreciated
Prontonet
Master DB
Jun 14, 2001What would the reasons when some of user tables are in master db/user table section as well as those tables are in user db/user table section listed.
Thanks,
Glen
Master
May 20, 1999Hi All,
We will be transfering a big application onto another server. Is it possible to copy the Syslogins with passwords onto the new server from the old one it resides. I do not want to restore Master onto the new server because the Server name will be different.
Use Master
Sep 15, 2006if i want to create a database, using:
CREATE DATABASE name
does it need the USE MASTER before the line? a database MUST be created using Master??
i ask this because in an example i need to create a database, so i use the next code:
CREATE DATABASE Banco
ON
(NAME='P_Banco',FILENAME='C:Documents and SettingsVictorEscritorioBancoP_Banco.mdf')
LOG ON
(NAME='P_Banco_Log',FILENAME='C:Documents and SettingsVictorEscritorioBancoP_Banco_Log.ldf')
USE Banco <-- i wrote this, because i tought i could create tables and stuff directly in my previously declared database, but it sends this error:
"Could not locate entry in sysdatabases for database 'Banco'. No entry found with that name. Make sure that the name is entered correctly."
anyway, i could do it, but first creating the database, and after that, in a separate code creating the tables with USE Banco, but my question is..why is that? or i miss something in my sql code??
Master Database
Jan 23, 2008Hi Y'all,
What are the advantages of placing stored procedures in the master database? Can i always use all the database-names on the instance?
Thanks!
Better Sql Master Needed
Feb 4, 2008Hi all,
I am having trouble modifying the select statement(s) below to return me only unique rows instead of duplicated rows. I give up. Can someone please jump in and give it a shot? Please help out. Thanks.
blumonde
************************************************************************************************sb.Append("SELECT TOP (@PageSize) TopicID, TopicName, Message ");
sb.Append("FROM (Select TOP (@CurrentPage*@PageSize) ROW_NUMBER() OVER (ORDER BY ftp.DateEntered DESC) AS Row, ftp.TopicID, ftp.TopicName, ft.Message ");sb.Append("FROM forumTOPIC ftp, forumTHREAD ft, forumCategory cat, forumTechnology tn ");
sb.Append("WHERE tn.TechnologyID = cat.toTechnologyID AND cat.CategoryID = ftp.toCategoryID AND tn.TechnologyName LIKE @KeyForum AND ftp.TopicID = ft.toTopicID AND FREETEXT(ft.Message, @KeyWord) ");sb.Append("GROUP BY ftp.TopicID, ftp.TopicName, ftp.DateEntered, ft.Message ");
sb.Append("ORDER BY ftp.DateEntered DESC) as t1 ");sb.Append("WHERE Row BETWEEN (@CurrentPage-1)*@PageSize+1 AND (@CurrentPage*@PageSize) ");
sb.Append("ORDER BY t1.Row ASC");
**********************************************************************************************************
Corrupt Master DB
Feb 7, 2002I had installed a third-party software on my server and that corrupted my Master DB. Over the weekend when we bought SQL server down, we could not bring it back up. I had to re-install SQL server and then restore all my databases from the backup. Is there a better way of doing this???
Curiously
Someone who calls himself a DBA
Restore Master !! Please Help ...
Feb 21, 2002Hi Friends ...
I need your advice and help on the following problem . Say for example I have a SQL 7.0 Server A with 30 databases and i am in the process of transfering these databases to another system which is SQL Server B with 7.0 again .
Although the Databases can be copied by various means , can i restore Master database from the Server A to Server B so that my Server B will have all the database and login information as that of Server A.
As Master database is system database , it won't allow to be dropped and hence you cannot restore .
Is there any other way to restore Master database from One SQL server 7.0 to another with the same SQL version .
Any kind of assistance will be of great help to me . Many thanks in advance .
Kind Regards
Sneha
Master DB SoruceCode Tbl Name?
Apr 12, 2002There is a table in the master DB where the sourcode of the SP's is saved, dies anyone knows the table's name?
Regards,
Master.dbo.sysdatabases
Aug 16, 2002Hi folks,
In SQL 7 when you query
select name, crdate from sysdatabases where name like 'xxx3%'
You get a reply with the rows of matching databases in sysdatabases. But in SQL 2000 the same command throws an error saying that the object sysdatabases is wrong. Here is the modified command
select name, crdate from master.dbo.sysdatabases where name like 'xxx3%'
Now my problem is I can include the latest piece of code and go further. But my older version of product will have this problem and will fail. Is there anyway that I can dothis on SQL 2000 to be compatible with my old product.
regards,
mahesh,
Master Database
Jul 9, 2001Hi,
I have a question regarding master database.I know if a master database is
corrupt we need to rebuild the master.One of the guys suggested us to
maintain a copy of master data file and log file in diffrent directory and
when master database is corrupt we can copy the files to the actual location
and restart the sql server and this should fix the issue and by this method we can save the time of rebuilding the master database.I don't know if this works.Can anyone please tell me if this works and also disadvantages if any with this method?
thanks
Mohan
Master Database Changes
Jul 18, 2001Various books read suggest that the Master
database be backed up when it is changed.'
What activities does a DBA perform (or perhaps)
a user) will cause the Master database to
change?
I am aware that information about the addition
of new databases is kept in the Master.
TIA Gary
Rebuilding Master
Aug 15, 2001Hi,
how long a rebuildm.exe takes?
TIA
Restore Master
Oct 9, 2001When I try to restore master, I keep getting an error message, while it is in the process of restoring, that says the connection has been broken. I assume it means the connection for single user mode. Any ideas on how to fix this??????
View 2 Replies View Related