Error In The OLE DB Command Component
Mar 4, 2008
hello Jamie actually i am trying to add something using OLE DB Command Component and i am getting this error
[Add Mail Status [8108]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Error in stored procedure <myStoredProcedure>: @fNameStatus must be a GUID for relational fields".
in the stored procedure, the column name accepts a varchar(800) and i am passing a String (3). from the source, the column is nVarchar(255). For some reason, its working for email and all others please HELP
--
View 5 Replies
ADVERTISEMENT
Apr 25, 2007
I am trying to use the OLE DB Command component in a data flow. I setup the connection manager and then entered the following SQL command.
UPDATE FCustomer
SET FId = CASE
WHEN ISNULL(@p1, 'N') = 'Y' AND @p2 IS NULL THEN '2'
ELSE '3' END
WHERE Id = @p3
AND CustomerId = @p4
So after that I went to the parameter tab and tried to set the data types. I assigned the data types. Mapped the fields to the paramters and hit ok. Ran the package and failed with a cast/conversion issue. When i went back in the parameters are all set back to the Integer 8 data type. I change, go back in and reset again. The help file says I can change the parameter names and data types, which it allows me to do, but never saves the settings.
Am I doing something wrong? Is this not possible?
Thanks!
View 1 Replies
View Related
Dec 3, 2007
Do you know of a way, in the OLE DB Command (Executing a sql command for each record), to specify a lock hint?
Example: in my component, I want to update a table but I want to specify a ROWLOCK or UPDLOCK hint.
When I try using this sql statement in the 'SqlCommand' property:
UPDATE DIM_Accounts WITH (UPDLOCK)
SET COL1 = ''
SSIS gives a syntax error.
Do you know any workarounds?
Thanks!
View 7 Replies
View Related
Jan 3, 2008
I'm trying to use an SSIS script component that will go do a DNS lookup on the contents of an input column. I've already got a vbs function that performs the wshshell.exec and parses the answer for address and/or errors. I'm having trouble with syntax for the call. When I attempt to run it, I get a lot of errors like "Name 'wshell' is not declared", "StdErr" is not a member of 'String'"
Does anyone have an example of a script that calls a command?
I'm fairly new to SSIS, but think I've properly set up the inputs and outputs.
View 9 Replies
View Related
Nov 9, 2006
We have schedule process server, calling SSIS package via command line (see below) to physical SSIS server. Get message "insufficient for component" and package call bombs.
Facts:
1. schedule process server has Workstation tools / Clients / Connectivity for SSIS loaded
2. SSIS is 2005, SP1
What are we missing?
c:>dtexec /DTS "File SystemSalesDWgyp_dm_carrier" /SERVER BPATLQDDW /CONFIGFILE "\bpatlqddwd$SSISSalesDWgypdm.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Error: 2006-11-09 10:43:34.94
Code: 0xC00470FE
Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline
Description: The product level is insufficient for component "Slowly Changing Dimension" (289).
End Error
Error: 2006-11-09 10:43:34.94
Code: 0xC00470FE
Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline
Description: The product level is insufficient for component "OLE DB Command" (775).
End Error
Warning: 2006-11-09 10:43:34.94
Code: 0x80019002
Source: gyp_dm_carrier
Description: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 10:43:32 AM
Finished: 10:43:34 AM
Elapsed: 2.383 seconds
View 6 Replies
View Related
Nov 4, 2006
Hi All,
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Please let me know where am going wrong?
Thanks in advance.
View 12 Replies
View Related
Oct 26, 2007
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
View 7 Replies
View Related
Apr 21, 2006
1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
View 1 Replies
View Related
Jan 23, 2007
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
View 4 Replies
View Related
Sep 19, 2006
Hi. I am writing a program in C# to migrate data from a Foxpro database to an SQL Server 2005 Express database. The package is being created programmatically. I am creating a separate data flow for each Foxpro table. It seems to be doing it ok but I am getting the following error message at the package validation stage:
Description: An OLE DB Error has occured. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object".
.........
Description: "component "OLE DB Destination" (22)" failed validation and returned validation status "VS_ISBROKEN".
This is the first time I am writing such code and I there must be something I am not doing correct but can't seem to figure it out. Any help will be highly appreciated. My code is as below:
private bool BuildPackage()
{
// Create the package object
oPackage = new Package();
// Create connections for the Foxpro and SQL Server data
Connections oPkgConns = oPackage.Connections;
// Foxpro Connection
ConnectionManager oFoxConn = oPkgConns.Add("OLEDB");
oFoxConn.ConnectionString = sSourceConnString; // Created elsewhere
oFoxConn.Name = "SourceConnectionOLEDB";
oFoxConn.Description = "OLEDB Connection For Foxpro Database";
// SQL Server Connection
ConnectionManager oSQLConn = oPkgConns.Add("OLEDB");
oSQLConn.ConnectionString = sTargetConnString; // Created elsewhere
oSQLConn.Name = "DestinationConnectionOLEDB";
oSQLConn.Description = "OLEDB Connection For SQL Server Database";
// Add Prepare SQL Task
Executable exSQLTask = oPackage.Executables.Add("STOCK:SQLTask");
TaskHost thSQLTask = exSQLTask as TaskHost;
thSQLTask.Properties["Connection"].SetValue(thSQLTask, "oSQLConn");
thSQLTask.Properties["DelayValidation"].SetValue(thSQLTask, true);
thSQLTask.Properties["ResultSetType"].SetValue(thSQLTask, ResultSetType.ResultSetType_None);
thSQLTask.Properties["SqlStatementSource"].SetValue(thSQLTask, @"C:LPFMigrateLPF_Script.sql");
thSQLTask.Properties["SqlStatementSourceType"].SetValue(thSQLTask, SqlStatementSourceType.FileConnection);
thSQLTask.FailPackageOnFailure = true;
// Add Data Flow Tasks. Create a separate task for each table.
// Get a list of tables from the source folder
arFiles = Directory.GetFileSystemEntries(sLPFDataFolder, "*.DBF");
for (iCount = 0; iCount <= arFiles.GetUpperBound(0); iCount++)
{
// Get the name of the file from the array
sDataFile = Path.GetFileName(arFiles[iCount].ToString());
sDataFile = sDataFile.Substring(0, sDataFile.Length - 4);
oDataFlow = ((TaskHost)oPackage.Executables.Add("DTS.Pipeline.1")).InnerObject as MainPipe;
oDataFlow.AutoGenerateIDForNewObjects = true;
// Create the source component
IDTSComponentMetaData90 oSource = oDataFlow.ComponentMetaDataCollection.New();
oSource.Name = (sDataFile + "Src");
oSource.ComponentClassID = "DTSAdapter.OLEDBSource.1";
// Get the design time instance of the component and initialize the component
CManagedComponentWrapper srcDesignTime = oSource.Instantiate();
srcDesignTime.ProvideComponentProperties();
// Add the connection manager
if (oSource.RuntimeConnectionCollection.Count > 0)
{
oSource.RuntimeConnectionCollection[0].ConnectionManagerID = oFoxConn.ID;
oSource.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oFoxConn);
}
// Set Custom Properties
srcDesignTime.SetComponentProperty("AccessMode", 0);
srcDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", true);
srcDesignTime.SetComponentProperty("OpenRowset", sDataFile);
// Re-initialize metadata
srcDesignTime.AcquireConnections(null);
srcDesignTime.ReinitializeMetaData();
srcDesignTime.ReleaseConnections();
// Create Destination component
IDTSComponentMetaData90 oDestination = oDataFlow.ComponentMetaDataCollection.New();
oDestination.Name = (sDataFile + "Dest");
oDestination.ComponentClassID = "DTSAdapter.OLEDBDestination.1";
// Get the design time instance of the component and initialize the component
CManagedComponentWrapper destDesignTime = oDestination.Instantiate();
destDesignTime.ProvideComponentProperties();
// Add the connection manager
if (oDestination.RuntimeConnectionCollection.Count > 0)
{
oDestination.RuntimeConnectionCollection[0].ConnectionManagerID = oSQLConn.ID;
oDestination.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oSQLConn);
}
// Set custom properties
destDesignTime.SetComponentProperty("AccessMode", 2);
destDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", false);
destDesignTime.SetComponentProperty("OpenRowset", "[dbo].[" + sDataFile + "]");
// Create the path to link the source and destination components of the dataflow
IDTSPath90 dfPath = oDataFlow.PathCollection.New();
dfPath.AttachPathAndPropagateNotifications(oSource.OutputCollection[0], oDestination.InputCollection[0]);
// Iterate through the inputs of the component.
foreach (IDTSInput90 input in oDestination.InputCollection)
{
// Get the virtual input column collection
IDTSVirtualInput90 vInput = input.GetVirtualInput();
// Iterate through the column collection
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the design time instance of the component.
destDesignTime.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);
}
//Map external metadata to the inputcolumn
foreach (IDTSInputColumn90 inputColumn in input.InputColumnCollection)
{
IDTSExternalMetadataColumn90 externalColumn = input.ExternalMetadataColumnCollection.New();
externalColumn.Name = inputColumn.Name;
externalColumn.Precision = inputColumn.Precision;
externalColumn.Length = inputColumn.Length;
externalColumn.DataType = inputColumn.DataType;
externalColumn.Scale = inputColumn.Scale;
// Map the external column to the input column.
inputColumn.ExternalMetadataColumnID = externalColumn.ID;
}
}
}
// Add precedence constraints to the package executables
PrecedenceConstraint pcTasks = oPackage.PrecedenceConstraints.Add((Executable)thSQLTask, oPackage.Executables[0]);
pcTasks.Value = DTSExecResult.Success;
for (iCount = 1; iCount <= (oPackage.Executables.Count - 1); iCount++)
{
pcTasks = oPackage.PrecedenceConstraints.Add(oPackage.Executables[iCount - 1], oPackage.Executables[iCount]);
pcTasks.Value = DTSExecResult.Success;
}
// Validate the package
DTSExecResult eResult = oPackage.Validate(oPkgConns, null, null, null);
// Check if the package was successfully executed
if (eResult.Equals(DTSExecResult.Canceled) || eResult.Equals(DTSExecResult.Failure))
{
string sErrorMessage = "";
foreach (DtsError pkgError in oPackage.Errors)
{
sErrorMessage = sErrorMessage + "Description: " + pkgError.Description + "";
sErrorMessage = sErrorMessage + "HelpContext: " + pkgError.HelpContext + "";
sErrorMessage = sErrorMessage + "HelpFile: " + pkgError.HelpFile + "";
sErrorMessage = sErrorMessage + "IDOfInterfaceWithError: " + pkgError.IDOfInterfaceWithError + "";
sErrorMessage = sErrorMessage + "Source: " + pkgError.Source + "";
sErrorMessage = sErrorMessage + "Subcomponent: " + pkgError.SubComponent + "";
sErrorMessage = sErrorMessage + "Timestamp: " + pkgError.TimeStamp + "";
sErrorMessage = sErrorMessage + "ErrorCode: " + pkgError.ErrorCode;
}
MessageBox.Show("The DTS package was not built successfully because of the following error(s):" + sErrorMessage, "Package Builder", MessageBoxButtons.OK, MessageBoxIcon.Information);
return false;
}
// return a successful result
return true;
}
View 2 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Jul 28, 2006
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
View 8 Replies
View Related
Oct 17, 2007
My process checks values in certain files in a "Source" folder against a table in a database. If these values do not match, those files are moved to a "Fail" folder and if they are validated then they are moved to a "Success" folder. My issue is caused by the fact that these files (which are notepad text files) are not being moved over to the success folder for the following error:
"The process cannot access the file '\Server1c$Source239598.TXT' because it is being used by another process."
I have checked whether these files were actually being used by another process but even cutting off users from the directory and even copied a test file into the folder, the issue will still pop up and for random files.
I've tried using two different components to do the same thing as the "Move" component --- "Copy files from source to destination" and then a separate component "Delete file from Source folder" which is essentially a move. The issue persists on the Delete process because it sees that the file is still being used by some other "imaginary" process it seems to me.
I've tried upping the MaxErrorCount on the Delete and even using the Move components to try to ignore this issue but the package still fails. Are there any other ways to get around this problem?
View 5 Replies
View Related
May 1, 2007
Hi
I am getting error in an SSIS,
Source-Excel File
Destination-SQL Server
Source has fields of DataType-Unicode strig[DT_WSTR], I am using "Data Conversion" Component to convert these into Integer.
Source(Unicode strig[DT_WSTR])------------Destination(numeric[DT_NUMERIC] Precision:18 ; Scale:0)
Error:
[Data Conversion [14]] Error: Data conversion failed while converting column "Column1" (99) to column "Column1_Converted" (204). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [14]] Error: The "output column "Column1_Converted" (204)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "Column1_Converted" (204)" specifies failure on error. An error occurred on the specified object of the specified component.
Can anyone tell me which Data Type should I use to convert string into integer.
Thanks
View 13 Replies
View Related
Aug 18, 2006
Hi,
I am getting this error in a Lookup component:
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT
FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2
WHERE
T1.DL_CODE = T2.DL_CODE
AND
T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
Thanks,
Aref
View 3 Replies
View Related
Jun 28, 2007
I have a Data Flow Task with an OLE DB Source containing this query:
SELECT Batch_Idx, Package, FailureSource
FROM Audit.ProcessPackage
WHERE (Status = 2) AND (Batch_Idx > ?) and FailureSource IS NOT NULL
At this point, before sending the data to the Recordset Destination, I would like to do a Row Count, and do something different depending on if there are any rows or not. When I try to put in the Row Count after the OLE DB Source, I get this error:
"The component has forbidden the requested use of the input column with lineage id xxx"
My variable for the RowCount results is RowCount and it is declared at package level. I have tried to use all each of the columns as input columns, and I get the error for every one. Do you know how I can fix this error? Thank you!
View 5 Replies
View Related
May 4, 2007
I have created a package which forms data from flat file to sql database.I have a data flow where all my data is processed to destination.if the package fails by any chance i want an email notification with the cause of the error.how can i do this.please let me know..
View 6 Replies
View Related
May 10, 2006
Hi,
Trying to get a particular SSIS is package working - while running the Package Installation wizard a package is reported with the following errors:
AcquireConnection method fails with error code 0xC0202009
Then Lookup fails validation and returns code 0xC020801C
The odd thing is the Lookup does not exist in the package, it did exist at one point but was deleted.
I have tried searching the XML and can't find any reference to the Lookup
Any suggestions appreciated...
Thanks,
John
View 4 Replies
View Related
Jul 18, 2006
Hi,
I have three script component A,B, C. A reads certain data from a table. B inserts records into a .txt file when the recordtype = 1. C inserts records into same .txt file when the recordtype = 0. Now I receive a script comp error for C as follows.
[Error Desc]
************************************************************
The process cannot access the file 'D:Documents and SettingsAdministratorDesktopAuditLog.txt' because it is being used by another process.
************************************************************
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options)
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at ScriptComponent_6bda9d13fce34f90ac6315546c8d0d54.ScriptMain.PreExecute() in dts://Scripts/ScriptComponent_6bda9d13fce34f90ac6315546c8d0d54/ScriptMain:line 19
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PreExecute()
[/Error Desc]
Can anyone throw some light on it.
Thanks
View 3 Replies
View Related
Oct 20, 2006
I am getting this error,
[Derived Column [192]] Error: Converting an input column from type DT_STR to type DT_WSTR failed. An error occurred while performing the implicit conversion on the input column.
But I don really understand y there is a attempt to type cast at all ?
Please advise ....
thanks in advance
View 6 Replies
View Related
Aug 17, 2007
I've read a MSDN article on enhancing error outputs with a script component. This solution added the script component astride the error output, and it was able to add a column with the error description text.
I would like to do something a little different. I'd like to add information from my custom component. When the component causes an error, it generally "knows why" - it has available to it the information that made it decide there was an error. I'd like to include that information in error outputs, but I haven't seen a way to do that.
Is this even possible using the error output directly? I could abandon error outputs and use Conditional Split, along with an "iserror" column plus my extra columns, but I'd prefer not to do that.
View 4 Replies
View Related
Jul 11, 2006
I have a Source Query with this sql set as a property expression:
"SELECT Category, Server_Name, Entitle_UserID,User_SubID,Start_Time,End_Time,Entitle_User_Name,Stat_Name,Stat_Count,Stat_Type,pk,create_date,run_num,Average,Median,Maximim FROM tbl_ws_stats WHERE pk > " + (DT_STR, 100, 1252)@[pk_var]
There is a message : 'The component has inconsistent metadata.'
Then when I click on the Source Query: 'The component is not in a valid state. Do you want the component to fix itself automatically?'
I also notice that there are no columns on the Column Mappings tab and no way to add columns.
How can I correct?
Thanks
View 9 Replies
View Related
Mar 28, 2008
I cannot open my script component in my SSIS package. Not sure if this is the cause, but I originally designed the package in BIDS and now have loaded Visual Studio 2005. Here are all the error messages:
===================================
Cannot show Visual Studio for Applications editor. (Microsoft Visual Studio)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.DataFlowUI.SR&EvtID=CouldNotShowVsaIDE&LinkId=20476
===================================
Engine returned Unknown Error (Microsoft.VisualBasic.Vsa)
------------------------------
Program Location:
at Microsoft.VisualBasic.Vsa.VsaEngine.LoadSourceState(IVsaPersistSite Site)
at Microsoft.SqlServer.VSAHosting.DesignTime.LoadEngineSource(String engineMoniker, String project)
at Microsoft.SqlServer.Dts.Pipeline.ScriptDesignTime.CreateDesignTimeEngine(String projectName, Boolean loadSource, ICodeGenerator codeGenerator)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ShowIDE()
at Microsoft.DataTransformationServices.DataFlowUI.ScriptUI.propPage_DesignScript(Object sender, EventArgs args)
===================================
A project with the name 'ScriptComponent_96f4738414c440d0b240beb6399cef36' already exists.
------------------------------
Program Location:
at Microsoft.Vsa.IVsaEngine.LoadSourceState(IVsaPersistSite site)
at Microsoft.VisualBasic.Vsa.VsaEngine.LoadSourceState(IVsaPersistSite Site)
Any help in solving this would be appreciated.
Thanks
David
View 16 Replies
View Related
Apr 11, 2008
Hi,
In one of the SSIS package, I have a Script Component with ReadWrite variables --> TotalRecordCount, JobName, CycleCode
But suddenly in our Prod server from where the SSIS package is executed against our Prod DB server (SQL Server 2005 SP2), it failed. The error message was
Error: 2008-04-11 07:31:20.61
Code: 0xC0047062
Source: DFT PolicyTerm Load SCR Balancing [839]
Description: System.Runtime.InteropServices.COMException (0xC001404D): Exception from HRESULT: 0xC001404D
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PostExecute()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPostExecute(IDTSManagedComponentWrapper90 wrapper)
End Error
I am attaching the code below here...
Imports System
Imports System.Data
Imports System.Data.OleDb
Imports System.Collections
Imports System.Text
Imports System.Windows.Forms
Imports System.Environment
Public Class ScriptMain
Inherits UserComponent
Public rowCount As Integer
Public Connections As New Connections(Me)
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
rowCount += 1
End Sub
Public Overrides Sub PostExecute()
'add to global variables
Variables.TotalRecordCount += rowCount
Dim stb As StringBuilder
stb = New StringBuilder
stb.Append(String.Format("<BalanceData ProgramName=""{0}"" JobName=""{1}"" CycleCode=""{2}"" >", "PST020", Variables.JobName, Variables.CycleCode))
stb.Append(String.Format("<BalanceLog BalanceItemId=""10040"" BalanceNumber=""{0}"" />", rowCount))
stb.Append("</BalanceData>")
With New OleDbCommand("dbo.uspInsertBalanceLog")
.CommandType = CommandType.StoredProcedure
'Define the common parameters
.Parameters.Add("@balanceLog", OleDbType.VarChar, 4000).Value = stb.ToString()
'Define and open the database connection
.Connection = New OleDbConnection(Connections.Prostar.ConnectionString)
.Connection.Open()
Try
.ExecuteNonQuery() 'Execute the procedure
Finally 'Always finalize expensive objects
.Connection.Close()
.Connection.Dispose()
End Try
End With
MyBase.PostExecute()
End Sub
End Class
Can tell me what the issue could be...
View 4 Replies
View Related
Jan 16, 2008
Well my 1 in/multiple out asynchronous script component was looking fabulous, until I tried to run it.
Turns out you can't step through a script component with the debugger, so I'm kind of stuck.
I'm getting the error 'There is no current row in the buffer. A row may need to be added using the AddRow method.'
Here's the script I'm running. For each input row, it's trying to unstring linefeed-seperated input column data into a set of arrays, then create an output row for each populated occurrence and use Addrow() to write the new row. (According to the MSDN doco I shouldn't need to use CreateNewOutputRows())
Can anyone spot where I'm going wrong?
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim rcobc(0 To 9) As String
Dim rcobcdesc(0 To 9) As String
Dim rcobcbase(0 To 9) As String
Dim rcobcunits(0 To 9) As String
Dim ratechg(0 To 9) As String
Dim ratelevy(0 To 9) As String
Dim ratered(0 To 9) As String
Dim ratetotal(0 To 9) As String
Dim arrposn As Integer
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
rcobc = Split(Row.INASMRCOBC, vbLf)
...(more unstringing here)
ratetotal = Split(Row.INASMRATETOTALGI, vbLf)
For arrposn = LBound(rcobc) To UBound(rcobc)
If rcobc(arrposn) > " " Then
RatelineBuffer.obc = rcobc(arrposn)
...(more assignments here)
RatelineBuffer.valuation = Row.ASMVALUATION
RatelineBuffer.AddRow()
End If
Next arrposn
End Sub
Public Sub CreateNewOutputRows()
'
' Add rows by calling AddRow method on member variable called "<Output Name>Buffer"
' E.g., MyOutputBuffer.AddRow() if your output was named "My Output"
'
End Sub
End Class
View 1 Replies
View Related
Aug 9, 2006
Hi there
I have small problem with the ADO 2.6 - 2.8 Command object.
I created a Stored procedure preforming some tasks within a tran.
whitin the tran i'm collecting the @@ERROR values and in the end (after tran closing )generating the correct error string - which will be send back to the caller
in the VB6 app, i'm using a command object with the next line:
Set MyRecordset= MyCommand.Execute
In all the cases and option, when i run the SP - the command preform the tasks and return closed recordset (with the currect answer) and i can't read it.
the only solution that worked until now: i need to call MyRecordset.Open which will requery the SP again and generate an error (User defined error).
It happens only when i run command.execute with SP that preforms multitasks and return result recordset.
CAN ANY ONE HELP ME
View 1 Replies
View Related
Mar 16, 2007
In a Data Flow, I have the necessity to use a SSIS variable of type ��Object�? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
��������������.
��������������.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!
View 3 Replies
View Related
Aug 13, 2007
Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
View 4 Replies
View Related
May 11, 2006
For the Custome source Component ErrorOutput, should I go for asynchronous / synchronous Output.
If i go for synchronous output
// Create the error output.
IDTSOutput90 errorOutput = ComponentMetaData.OutputCollection.New();
errorOutput.IsErrorOut = true;
errorOutput.Name = "ErrorOutput";
errorOutput.SynchronousInputID = What Id is required here;
errorOutput.ExclusionGroup = 1;
Is it the IDTSOutput90 InPut.ID / OutPut.ID which should be assigned.
Thanks Regards
Anil
View 5 Replies
View Related
May 7, 2006
I have a COM object that is written using Visual Basic 6. This is referenced in a .NET Stored Procedure. But when I execute the stored procedure I get an error:
Msg 6522, Level 16, State 1, Procedure prCalculator_ExecCalc, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'prCalculator_ExecCalc':
System.Runtime.InteropServices.COMException: Retrieving the COM class factory for component with CLSID {844E8165-ABC1-432B-9490-51B1A6D91E71} failed due to the following error: 80040154.
System.Runtime.InteropServices.COMException:
Here is what I do:
1. Compile the VB DLL.
2. Convert into a .NET assembly by importing to a Visual Studio 2005 project. Sign the interop assembly.
3. Register it as an assembly in SQL 2005 server.
4. Create a .NET stored procedure and reference the above assembly. Compile this assembly again in SQL 2005 and create a stored procedure using the assembly. This assembly is also signed.
Please Note:
1. All the assemblies are registered with UNSAFE permissions.
2. They are compiled with COM Visible flag in Visual Studio 2005.
3. This works perfectly on my local SQL Express where I have Visual Basic/VisualStudio 2005 installed.
4. I get this error, when trying on Test Server. I tried to install the VB Runtime on this machine and still does not work.
So, what am I missing? Thanks for your help.
.
View 4 Replies
View Related
Oct 8, 2007
Hi all,
I recieve an error when I use the Lookup component in SSIS that reads:
Statement(s) could not be prepared.
I'm using a SQL 2005 DB as the source which runs into a lookup table and is use to compare records with an SQL 2000 Database. I've created connection managers successfully to both these databases. When trying to use the results of an SQL Query for the lookup to the SQL 2000 database (which is a linked server) and I try to map the columns, the error pops up and exits out of the lookup properties Window
The details to the error read:
Program Location:
at Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.Connections.SQLTaskConnectionOleDbClass.PrepareSQLStatement(String sql, Boolean bypassPrepare)
at Microsoft.DataTransformationServices.Design.DtsConnectionCommonControl.CheckSqlQuery()
I'm looking to use the results of this comparison to output in some form of a report. Ideas would be greatly appreciated!
View 36 Replies
View Related
Aug 21, 2007
Can someone please point me to one or more examples of a Source component that has two or more outputs?
I wrote a source, which works with a single output, but after adding a second output, I see no rows there. I've single-stepped the code in the debugger, and it looks like it should be adding rows to the second output, but the downstream component never sees any.
Thanks.
View 7 Replies
View Related
Dec 18, 2007
Hi,
I have a Script Component that needs to read values from a User Variable in PreExecute, modify the values and write them back to the Variable in PostExecute.
The Problem is it works just fine in DEV environment where only the SSIS tools are installed but not the service. But it failes with error in Test enviroment.
Error No: -1073450910.
----------------------
Error Desc: System.Runtime.InteropServices.COMException (0xC001404D): Exception from HRESULT: 0xC001404D
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PostExecute()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPostExecute(IDTSManagedComponentWrapper90 wrapper)
---------------------
Here is the code:
Public Overrides Sub PreExecute()
Dim vars As IDTSVariables90
Me.VariableDispenser.LockOneForRead("PrevMember", vars)
m_sPrevMember = vars.Item("PrevMember").Value.ToString
vars.Unlock()
Me.VariableDispenser.LockOneForRead("PrevNoteSeq", vars)
m_iNoteSeq = CInt(vars.Item("PrevNoteSeq").Value)
vars.Unlock()
MyBase.PreExecute()
End Sub
Public Overrides Sub PostExecute()
Dim vars As IDTSVariables90
Me.VariableDispenser.LockOneForWrite("PrevMember", vars)
vars("PrevMember").Value = m_sPrevMember
vars.Unlock()
Me.VariableDispenser.LockOneForWrite("PrevNoteSeq", vars)
vars("PrevNoteSeq").Value = m_iNoteSeq
vars.Unlock()
MyBase.PostExecute()
End Sub
Any idea what the problem is?
Is there any other way i can accomplish this?
Thanks.
View 7 Replies
View Related
