Error Installing Express Edition With VS2005 Standard
Nov 15, 2005I've installed VS2005 Standard Edition onto a machine running XP Home
View 11 RepliesI've installed VS2005 Standard Edition onto a machine running XP Home
View 11 RepliesI am dealing with the same issue posted in this other thread that seems to have died with no solution found:
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1131407&SiteID=17
Almost as soon as I start to install SQL 2005 on my Windows XP Pro Version 2002 Service Pack 2 machine at work it pops up a dialog with one of the following 2 error messages (they alternate randomly):
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine PCF092191 Error:2147500034 (0x80004002).
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine PCF092191 Error:2147749907 (0x80041013).
After clicking OK the installation just closes.
I also discovered when I load wmimgmt.msc and click Properties on the WMI Control, I get the following errors on the General tab, AND it does not allow me to click on any other tabs:
Failed to initialize all required WMI classes.
Win32_Processor: <Null>: No such interface supported
Win32_WMISetting: Successful
Security information: Successful
Win32_OperatingSystem: <Null>: No such interface supported
I have been searching online for days and tried doing virtually everything I found that I could understand and nothing works. Reinstalling WMI off the XP CD doesn't work, rebuilding the WMI repository doesn't work, registering all the WMI DLLs and MOF files doesn't work, running all the various scripts to fix WMI that are posted all over online doesn't work.
I downloaded the Microsoft WMI Diagnostics tool and ran it. It printed a ton of errors in a 466-line report that I can't make head or tail of. 6 here, 33 there, 27 over there...almost too many to count. The suggestions it gives to fix them range from vague and incomplete to incomprehensible. I'll paste those error results into a followup post.
I installed the WMI Tools package and can't figure out what to do with any of the tools at all. The only thing I noticed is that when examining a section under Win32_Processor, most entries for various properties are marked <empty>, while I have seen people discussing what I think are those same properties online and talking about seeing stuff typed into theirs (such as the HostingModel having LocalServiceHost typed in and ImpersonationLevel having 1 typed in). But there are so many properties and I'm not sure what should be typed into all of them or if I'm even looking in the right place.
I've seen some suggestions in WMI documentation that not all WMI errors may be related to WMI itself at all, which I think might be the case here, but I don't know. Some material said DCOM may be the problem, but I didn't have much luck figuring out how to fix that either. From the WMI Diagnostics it looks like there may be multiple errors of different kinds, but if it's that bad, I don't know how my computer's been working at all.
I've been using this computer for 9 months and had no major problems with it, although I did have a problem installing Microsoft Windows Genuine Advantage Notification, for which Microsoft sent me a script that fixed it. One other person here at work is suffering from this same WMI error, but most people have been able to install SQL 2005 here with no problem.
My boss does not want me to just do a full XP reinstall. He wants me to identify the specific problem and fix it. If this was my home computer I wouldn't spend so much time banging my head over this incomprehensible problem. But a full reinstall is not really an option for me in this case, unless maybe Microsoft says that's the only way to fix it.
I am available to deal with this issue during 9 to 5 eastern time Monday to Friday.
Thanks in advance for any help...
Eric
This is (some of) the output from the Core(Local)log:
If possible, determine action
Machine = DJONES-XP, Article = WMIServiceWin32OSWorking, Result = 2147500034 (0x80004002)
Machine = DJONES-XP, Article = WMIServiceWin32CompSystemWorking, Result = 2147500034 (0x80004002)
Machine = DJONES-XP, Article = WMIServiceWin32ProcessorWorking, Result = 2147500034 (0x80004002)
Machine = DJONES-XP, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = DJONES-XP, Article = WMIServiceWin32DirectoryWorking, Result = 70347 (0x112cb)
Machine = DJONES-XP, Article = WMIServiceCIMDataWorking, Result = 70347 (0x112cb)
Machine = DJONES-XP, Article = XMLDomDocument, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: DJONES-XP
*******************************************
Article: WMI Service Requirement, Result: Error
Description: Windows Management Instrumentation (WMI) is not functioning properly. Further checks cannot be performed. Action: Please make sure Windows Management Instrumentation (WMI) is functioning properly.
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine DJONES-XP Error:2147500034 (0x80004002).
The checkResult returned is 2147500034
The checkResult for local machine returned by CheckSCCResult is 70036
Setup is unable to proceed because one of scc articles failed. Please address those errors before continuing the setup.
Thanks DeWayne
I have a windows 2003 server with the latest service pack and patches. This server also acts a domain controller.
View 4 Replies View RelatedI am attempting to install SQL Server 2005 on a Laptop with Windows 2003 Standard Edition.
The installation fails and the File Summary.txt has the following entries:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time : Fri Nov 30 09:36:53 2007
Machine : SAPDEMO
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_BOL_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : SQLXML4
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLXML4_1.log
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Fri Nov 30 09:38:41 2007
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_BOL_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLXML4_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework 2.0 LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Upgrade Advisor.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Upgrade Advisor LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Windows Installer.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Windows Installer LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SCC.log
The Log File, SQLSetup0004_<hostname>_Core.log, has the following entries:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 03 08:54:09 2007
Process ID : 2980
C:SAP_CDCD2x86EnterpriseEditionServerssetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/11/3 8:54:9
Complete: LoadResourcesAction at: 2007/11/3 8:54:9, returned true
Running: ParseBootstrapOptionsAction at: 2007/11/3 8:54:9
Loaded DLL:C:SAP_CDCD2x86EnterpriseEditionServersxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/11/3 8:54:9, returned true
Running: ValidateWinNTAction at: 2007/11/3 8:54:9
Complete: ValidateWinNTAction at: 2007/11/3 8:54:9, returned true
Running: ValidateMinOSAction at: 2007/11/3 8:54:9
Complete: ValidateMinOSAction at: 2007/11/3 8:54:9, returned true
Running: PerformSCCAction at: 2007/11/3 8:54:9
Complete: PerformSCCAction at: 2007/11/3 8:54:9, returned true
Running: ActivateLoggingAction at: 2007/11/3 8:54:9
Complete: ActivateLoggingAction at: 2007/11/3 8:54:9, returned true
Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result.
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2980" returned false.
Running: PerformSCCAction2 at: 2007/11/3 8:54:9
Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.4042
Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.4042
Complete: PerformSCCAction2 at: 2007/11/3 8:54:9, returned true
Running: PerformDotNetCheck at: 2007/11/3 8:54:9
Complete: PerformDotNetCheck at: 2007/11/3 8:54:9, returned true
Running: ComponentUpdateAction at: 2007/11/3 8:54:9
Complete: ComponentUpdateAction at: 2007/11/3 8:55:6, returned true
Running: DetectLocalBootstrapAction at: 2007/11/3 8:55:6
Complete: DetectLocalBootstrapAction at: 2007/11/3 8:55:6, returned true
Running: LaunchLocalBootstrapAction at: 2007/11/3 8:55:6
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1605
Aborting queue processing as nested installer has completed
Message pump returning: 1605
Regards
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
Hi
I have installed SQL Server Express 2005 on my machine.
I want to install SQL Server Standard Edition 2005 on my machine to check new services it has.
Can these 2 Editions coexist with each other, or any troubles you think might encounter?
Thanks
I am trying to install sql server 2005 express edition.But i get an error stating that
sql server setup unexpectedly failed. For more information review the detup summary log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGsummary.txt
Summary.txt looks like this.It has only these 3 lines of information nothing else other this, which i have seen in many posts.
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Time : Tue Apr 03 22:36:33 2007
I am using windows xp. Probably many of you might have had this problem.Could anyone please provide me with some help.Thanks in advance.
I encountered an error when attempting to install Visual Basic Express Edition RTM. During the setup, I selected MSDN Express Edition and SQL Server 2005 Express Edition. Specifically, the SQL Server 2005 EE part of the installation failed. Here's the error I received:
Visual Basic 2005 Express Edition Setup
Error occurred during setup
Visual Basic 2005 Express Edition has been successfully installed.
The following component failed to install:
Microsoft SQL Server 2005 Express Edition x86
I had not installed any betas on this particular PC; however, I had already installed Visual Studio 2005 Pro and SQL Server 2005 Developer Edition.
(I selected SQL Server EE during the VBEE install because the VBEE readme said that the VSEE Editions (except for VWD) only work with SQL Server EE--so I figured I had to install SQL Server EE if I wanted to do any database work with VBEE. Is that the case?)
The following two log files were the only ones containing any error messages. How should I proceed?
C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core.log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:40:32 2005
Process ID : 5824
c:211395ac6e4ed715363fsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:40:31
Complete: LoadResourcesAction at: 2005/11/19 14:40:31, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:40:31
Loaded DLL:c:211395ac6e4ed715363fxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:40:32, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:40:32
Complete: ValidateWinNTAction at: 2005/11/19 14:40:32, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:40:32
Complete: ValidateMinOSAction at: 2005/11/19 14:40:32, returned true
Running: PerformSCCAction at: 2005/11/19 14:40:32
Complete: PerformSCCAction at: 2005/11/19 14:40:32, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:40:32
Complete: ActivateLoggingAction at: 2005/11/19 14:40:32, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5824" returned false.
Running: PerformSCCAction2 at: 2005/11/19 14:40:32
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Complete: PerformSCCAction2 at: 2005/11/19 14:40:33, returned true
Running: PerformDotNetCheck at: 2005/11/19 14:40:33
Complete: PerformDotNetCheck at: 2005/11/19 14:40:33, returned true
Running: ComponentUpdateAction at: 2005/11/19 14:40:33
Complete: ComponentUpdateAction at: 2005/11/19 14:41:6, returned true
Running: DetectLocalBootstrapAction at: 2005/11/19 14:41:6
Complete: DetectLocalBootstrapAction at: 2005/11/19 14:41:6, returned true
Running: LaunchLocalBootstrapAction at: 2005/11/19 14:41:6
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1706
Aborting queue processing as nested installer has completed
Message pump returning: 1706
C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core(Local).log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:41:10 2005
Process ID : 5476
c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:41:9
Complete: LoadResourcesAction at: 2005/11/19 14:41:9, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:41:9
Complete: ValidateWinNTAction at: 2005/11/19 14:41:9, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:41:9
Complete: ValidateMinOSAction at: 2005/11/19 14:41:9, returned true
Running: PerformSCCAction at: 2005/11/19 14:41:9
Complete: PerformSCCAction at: 2005/11/19 14:41:9, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:41:9
Complete: ActivateLoggingAction at: 2005/11/19 14:41:10, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5476" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2005/11/19 14:41:10
Complete: PerformDotNetCheck2 at: 2005/11/19 14:41:12, returned true
Running: InvokeSqlSetupDllAction at: 2005/11/19 14:41:12
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [US05046]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = US05046, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = US05046, Article = XMLDomDocument, Result = 0 (0x0)
Machine = US05046, Article = Processor, Result = 0 (0x0)
Machine = US05046, Article = PhysicalMemory, Result = 0 (0x0)
Machine = US05046, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = US05046, Article = OSVersion, Result = 0 (0x0)
Machine = US05046, Article = OSServicePack, Result = 0 (0x0)
Machine = US05046, Article = OSType, Result = 0 (0x0)
Machine = US05046, Article = AdminShare, Result = 0 (0x0)
Machine = US05046, Article = PendingReboot, Result = 0 (0x0)
Machine = US05046, Article = IEVersion, Result = 0 (0x0)
Machine = US05046, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = US05046, Article = COMPlus, Result = 0 (0x0)
Machine = US05046, Article = ASPNETVersionRegistration, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: US05046
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2005/11/19 14:42:59, returned true
Running: SetPackageInstallStateAction at: 2005/11/19 14:42:59
Complete: SetPackageInstallStateAction at: 2005/11/19 14:43:1, returned true
Running: DeterminePackageTransformsAction at: 2005/11/19 14:43:1
Complete: DeterminePackageTransformsAction at: 2005/11/19 14:43:5, returned true
Running: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5
Complete: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5, returned true
Running: OpenPipeAction at: 2005/11/19 14:43:5
Complete: OpenPipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2005/11/19 14:43:5
Complete: CreatePipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2005/11/19 14:43:5
Complete: PopulateMutatorDbAction at: 2005/11/19 14:43:5, returned true
Running: GenerateRequestsAction at: 2005/11/19 14:43:5
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = -1
SQL_SharedTools = 3
SQL_BC_DEP = -1
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = -1
SQL_WarehouseDevWorkbench = -1
SDK = 3
SQLXML = -1
Tools_Legacy = -1
TOOLS_BC_DEP = -1
SQL_Documentation = -1
SQL_BooksOnline = -1
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2005/11/19 14:43:11, returned true
Running: CreateProgressWindowAction at: 2005/11/19 14:43:11
Complete: CreateProgressWindowAction at: 2005/11/19 14:43:12, returned false
Error: Action "CreateProgressWindowAction" failed during execution.
Running: ScheduleActionAction at: 2005/11/19 14:43:12
Complete: ScheduleActionAction at: 2005/11/19 14:43:13, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2005/11/19 14:43:14
Installing: sqlsupport on target: US05046
Complete: InstallSqlAction.11 at: 2005/11/19 14:43:26, returned true
Running: InstallSqlAction.12 at: 2005/11/19 14:43:26
Installing: sqlncli on target: US05046
Complete: InstallSqlAction.12 at: 2005/11/19 14:43:40, returned true
Skipped: InstallSqlAction.18
Skipped: Action "InstallSqlAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.21 at: 2005/11/19 14:43:40
Installing: sqlwriter on target: US05046
Failed to install package
Fatal error during installation.
Setting package return code to: 1706
Complete: InstallSqlAction.21 at: 2005/11/19 14:43:50, returned false
Error: Action "InstallSqlAction.21" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: InstallSqlAction.22
Skipped: Action "InstallSqlAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.9 at: 2005/11/19 14:43:50
Installing: msxml6 on target: US05046
Complete: InstallSqlAction.9 at: 2005/11/19 14:43:54, returned true
Running: InstallToolsAction.11 at: 2005/11/19 14:43:54
Installing: sqlsupport on target: US05046
Complete: InstallToolsAction.11 at: 2005/11/19 14:44:2, returned true
Running: InstallToolsAction.12 at: 2005/11/19 14:44:2
Installing: sqlncli on target: US05046
Complete: InstallToolsAction.12 at: 2005/11/19 14:44:11, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.18
Skipped: Action "InstallToolsAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.20
Skipped: Action "InstallToolsAction.20" was not run. Information reported during analysis:
No install request found for package: "BOL", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.22
Skipped: Action "InstallToolsAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.9 at: 2005/11/19 14:44:11
Installing: msxml6 on target: US05046
Complete: InstallToolsAction.9 at: 2005/11/19 14:44:15, returned true
Action "InstallSqlAction" will return false due to the following preconditions:
Condition "Action: InstallSqlAction.21 has finished and failed." returned true.
Installation of package: "sql" failed due to a precondition.
Step "InstallSqlAction" was not able to run.
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallToolsAction at: 2005/11/19 14:44:15
Installing: tools on target: US05046
Complete: InstallToolsAction at: 2005/11/19 14:44:26, returned true
Skipped: InstallToolsAction.10
Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2005/11/19 14:44:27
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1706
Error Code: 0x800706aa (1706)
Windows Error Text: The endpoint format is invalid.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
sqls::HighlyAvailablePackage::manageVsResources
ce: 29539
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_US05046_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0003.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2005/11/19 14:44:52
Message pump returning: 1706
I receive the error:
Installation Failure
Error Code: 0x734C
Try to install the update again, or request help from one of the following resources.
For self-help options:
Frequently Asked Questions
Find Solutions
Windows Update Newsgroup
For assisted support options:
Microsoft Online Assisted Support (no-cost for issues related to getting updates)
nothing seems to be available for this error.
any ideas?
I was able to install and use the vs 2005 for the first time today, and it was so far, so good!
View 1 Replies View RelatedHello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies View RelatedI need to install SQL Server 2005 Standard Edition on a new Windows Server 2003 machine that has SQL Server 2005 Express Edition installed by a backup application (Backup Exec). Will I need to uninstall the express edition in order to install the standard edition? Can the two coexist as separate instances or will the standard edition installation simply upgrade the express installation?
Thanks
Would there be any issues with installing an MSSQL 2000 32 bit instance onto a windows 2003 64 bit server?
View 5 Replies View RelatedWhen i install sql server 2000 i have a message
" Microsoft SQL Server 2000 Standard Edition Server Component is not supported on this operating system only client components will be available for installation"
Hence I cannot install properly. I installed only the client componets. Thereafter when I went through Enterprise Manager and tried to establish a connection, I failed. It said server does not exist.
What to do now?
I found out that if one has sql server 2000 standard editon the prerequisties are
Microsoft Windows NT Server 4.0 with Service Pack 5 or later, Windows NT Server 4.0 Enterprise Edition with Service Pack 5 or later, Windows 2000 Server, Windows 2000 Advanced Server, or Windows 2000 Datacenter Server.
I have windows xp professional version on which i am installing sql server standard edition.
Which of the above exists in my OS. Or which should I download.
Thanks
hi Champion,
My machine is already having vs2003 with sqlserver 2000. Now when I have installed vs2005 that time I have not loaded sqlserver 2005 express edition.
But now when am trying to install the same i.e sqlserver 2005 express edition its unable to install/update this database.
the error coming as "None of the selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine. To continue click Back, and then select features to install. To exit sql server setup, click cancel"
pls help
hi all,
I was under the impression that SQL Server 2005 can install on dual processor, quad core Intel machines.
Here's what we have: Intel Quad Core Xeon (E7340) @ 2.4Ghz. (8 way)
Has anyone encountered any issues w/ this setup -- particularly on this Intel CPU version?
thank you,
Cosmin
I am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
Hi, i have sql server 2005 standard installed on my machine. I want to work on express edition and learn about it but on the installation its gets stuck because a higher version is installed. If the express version is free why cant have both versions installed on my machine. Thank you.
View 7 Replies View RelatedHi,
I have installed SQL standard Edition in my computer for one project. We want to kick off a new project, and intend to use SQL Express, Will anybody advise me whether I can install SQL express when SQL Standard Edition is there? or I need to remove SQL standard Edition first and install SQL express?
Thanks a lot
Haihong
Hi,
For the SQL Express & Std Edition have rows limited....
I have try convert a 3,667,345 rows data into SQL Sever can the SQL Expree 2005 and SQL Std 2000 support this volume of rows???
Hi Guys,
Having some problems Upgrading from SQL Express 2005 SP2 to SQL 2005 Standard. I'm getting the following:
Name: Microsoft SQL Server 2005 Express Edition
Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Build version check:
Your upgrade is blocked because the existing component is a later version than the version you are trying to upgrade to. To modify an existing SQL Server component, go to Add or Remove Programs in Control Panel, select the component you would like to modify, and then click Change/Remove.
Pretty sure that I have to have SQL 2005 Std w/SP2 but I don't have a CD with it on. Is there a way that I can create one so that I can upgrade the SQL Instance In-Place.
Thanks in advance
Michael
We are trying to install the Standard Edition of SQL Server 2005. We already have SQL Express installed. Standard won't install and Express won't uninstall.
We have tried every suggestion we can find and some we made up. When we try to install Standard, we get to the bit where you choose what you want to install and the only thing available is workstation components.
There are so many cases of this on the Internat that I can't believe MS have not solved the issue. And I am stunned that they want to charge us more money to talk to us about how to fix something we just paid them an arm and a leg for!
What do I need to tell you to get some idea of where to go next with this?
I tried to upgrade an Express edition 2005 to Standard Edition 2005. I did remember to use the command prompt setup parameter to allow the upgrade but still the option to upgrade is disabled. Can upgrade from express to standard?
Just bought the SQL server 2005 standard edition software to replace the express edition that I have been running for the last 6 months.
The setup works fine until I ask it to install the management studio.
At this stage it seems to think that I have a newer version already installed and tells me that it won't upgrade it.
I then wend through the add/remove sotware function in control panel and removed everything to do with SQL server and tried again. The same thing happened.
Any ideas what I should try next ??
James
Hi,
We're currently developing an application against SQL Server 2005 Standard Edition. Recently, we've started to consider deploying certain installations against SQL Server Express. We're particularly worried about some stored procedures we've written taking advantages of features which will not be available in SQL Server Express, is there a simple compliance tool or such that we can scan our existing tables/functions/stored procedures/etc with to identify potential pitfalls when running on SQL Server Express?
Thanks,
Jeremy
Hi guys,
I'm trying to create a all-in-one installation package for my application which make use of the SQL 2005 Express edition. It seems that there's no way to roll my application MSI installation with the database engine, the only ways around this problem is to use a bootstrap exe to launch the sql setup before or after my main application's MSI. This works fine during installation and I have modified the original .NET framework bootstrapper to do just that.
The problem comes when uninstalling my application. Since the uninstall process is all done through the MSI engine, how would I take the sql instance with me during my application's uninstall? Since the sql engine is also based on MSI technology, I won't be able to do that during the removal step of my application's MSI, right? Any one know any "clean" ways around that? Besides not letting users uninstall my application directly from Add/Remove program and force them to call another exe simular to my installation bootstrap?
I'm considering to use 3rd party tools like InstallShields, but even them are recommending people to stay with the MSI technology which is where the problem is. I'm running out of ideas really fast...
Thanks in advance!
William
When I try to Install SQL Server expres edition I keep on getting this error: http://www.fambouman.com/SQLError.JPG
I'am running Windows SBS 2003 fully updated via windows update.. When I go to the URL mentioned in the error I get an error and the browser redirects to microsoft search.
Anybody know how I can setup SQL Expres ? I need it for dotnetnuke to run.
Thanks in advance
I have Windows Vista Home Premium, with Visual Studio 2005 installed, and SQL Server Express Edition installed. What I want to do is upgrade to SQL Server Express Edition SP2. I understand that I can install SP2 on top of SQL Server Express Edition. However, there are just a couple of areas that I'd like assurances on (have never used SQL Server):
1. Since all my work with SQL Server Express Edition SP2 will be done via the Visual Studio 2005 IDE, does that mean that I don't need to download and install SQL Server Management Studio Express? The Management Studio seems to be more for a standalone development environment. I just want to make sure about this.
2. Also, the information on the information page about Windows Vista issues with User Account Control is not specific to SQL Express Edition SP2. There's a lot of generic and, quite frankly, very abstract information that is hard to understand. For now I'm just planning to install SQL Server and leave it at that, unconfigured, in whatever state the install leaves it at. I am hoping against hope that I will be able to familiarize myself with SQL Server via the Microsoft Visual C# 2005 Step-by-Step book, which is why I'm upgrading to SQL Server Express Edition SP2 in the first place. I'll glean what I can about configuration in the SQL Server Express Edition SP2 docs, but what are the chances that I'll find anything that is specific to using the database soley with Visual Studio 2005? Perhaps I'll be pleasantly surprised. About the User Account control issues, are there are any articles that specifically discuss User Account control issues that are associated with SQL Server Express Edition SP2?
Sorry about the windage. I'm a little cranky after spending about 2 hours clicking from one link to another.
Ed
Hello everybody,
I got a problem in my development phase. I'm developing a web-application system that running merge database technology which is centralized database and distributed database. This is because my customer want a highly optimum system standby.
My centralized database running SQL Server 2005 Standard Edition and the distributed database running SQL Server 2005 Express Edition (because it is free). Each of these database, the users can change the data on its database. So, every database must have the same data. from my understanding, each server must act as Publisher and Subscriber. Can SQL Server 2005 Express Edition be a Publisher?
If not, what the solution you all may suggest, because cost is the first factor. If my architecture is not correct, so what you all suggest to me to resolve the problem.
Thanks so much. Any suggestion and opinion is highly appreciate and I'm highly thanks to you all.
I have Visual Web Developer 2005 Express edition and I wanted to install SQL Server 2005 Express edition.From this page, I have downloaded and installed 'Microsoft SQL
Server 2005 Express Edition' and 'Microsoft SQL
Server 2005 Express Edition with Advanced Services http://msdn.microsoft.com/vstudio/express/sql/download/After the installation, how should I access the SQL Server 2005 Express edition?Because the only thing listed in 'Start > All Programs > SQL Server 2005' is 'Configuration Tools'I was hoping that when I install SQL Server 2005 express edition, I would get all the menu that I get by installing SQL Server 2000.So after installing SQL Server 2005 Express edition, what should I be expection? Thanks
I Try to install SQL Server Express in Windows 2003 Standard edition x64 and have some problems.
It say that can not instal client and say to use sqlncli_x64.msi, but I can not find this packege to install this client and I receive one alert with ASP.NET register 64.
I Check all request systems requirements many times and looks ok.
How can I solve this to install properly the SQL 2005 Express? When the setup finish say that was not possiblem to install SQL Server 2005 Express.
Regards
Leandro
I have downloaded a free set of SQL Server 2005 Express edition. This set up has been installed successfully on my machine but it is showing me following links.
SQL Server Instance=SQLExpress
User Id=sa
Password=admin12
Start ---> Microsoft Sql Server 2005 --->Configuration Tools ------->SQL Server Configuration Manager
--------->SQL Server Eroor and Usage Reporting
----------->SQL Server Surface Area Configuration
But I don't find any option to start SQL Server 2005 express edition. Please help me out how to start SQL Server 2005 express edition?