Error Installing SQL Server 2005 Developer Edition
Mar 6, 2007
I get the following error installing SQL Server 2005 Developer Edition
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: You must have administrative credentials to perform this task. Contact your system administrator for assistance.
I am installing on Windows XP with Admin privs.
There is nothing listed in COM+ Services for SQL.
The Distributed Transaction Coordinator service is running.
There is a previous installation of SQL 2000 Developer Edition installed.
I have seen some pretty old posts with the same error.
I was wondering if there was a final resolution, service pack, etc. that solves this problem?
Hi, I have Vista Home premium edition and trying to install SQL Server developer edition 2005 as local administrator. I have already enabled IIS 7 and have Office Ultimate 2007 installed. When I run the set up program, I get a warning titled "Program Compatibility Assistant" that my Operating system may not be compatible with the version of sql server I am installing. It says after setup is complete, I should run SP2 of SQL Server 2005 with 3 buttons as "Check for solutions online", "run this program" and "cancel"...
My question, should I select "run this program" and after the setup completes, download SP2 and apply the patch?
I read some articles in forums that sounds like lot of issues to get sql server working on vista. Can some one direct me to correct options. This is my wife's machine so I dont want to experiment too much and blow her machine away. Please help.
Hi Everyone, Recently I installed Visual Studio 2005 which also installed SQL Express Edition with it. I then installed SQL Server 2005 Developer Edition and am now able to see two instances SQLEXPRESS and MSSQLERVER. I do not want to use the Express version anymore, Do I have to have the Express version running or can I have just the Developer Edition ? Please help, can't find any help on the SQL website! Thanks
I tring to install SQL Server 2005 Developer Edition on Windows XP Pro but i not able to to so because of the following errors:-
Action "OpenPipeAction" failed during execution Action "CreatePipeAction" failed during execution. MsiOpenDatabase failed with 87 MsiOpenDatabase failed with 87 for MSI
Action "InstallDTSAction.9" failed during execution. Error information reported during run: Action: "InstallDTSAction.9" will be marked as failed due to the following condition: Condition "Package "9" either passed when it was last installed, or it has not been executed yet" returned false. Condition context: Prereq package will be failed due to the previous installation attempt returning: 1605
I downloaded SQL Server 2005 Developer Edition (x86) via MSDNAA (the package conatins 2 cd images the download program CRC checked them and all. I'm trying to install it on Windows XP prof. sp2).
When I mount the first CD, the installation menu comes up, if from the Install menu I select
"Server components, tools, Books Online, and samples"
an error message pops up saying:
"The application or DLL D:Setupsetupex.dll is not a valid Windows image. Please check this against your installation diskette."
When I press OK, it pops up again, then after clicking on OK one more time the Microsoft SQL Server 2005 Setup window comes up. After accepting the installation conditions and clicking next, it takes me to the "Installing Prerequisites" phrase, where when I press the Install button, it writes:
"Errors occured during the installation:
Error 193 installing .NET Framework 2.0"
Then the installation freezes, and I must press cancel (after that, the installation breaks saying: SQL Server Setup unexpectedly failed...)
If in the installation menu I choose
"
Install SQL Server Upgrade Advisor"
or
"
Run the SQL Native Client Installation Wizard"
a warning pops up saying:
"This installation package could not be opened.
Contact the application vendor to verify that this is a
valid Windows Installer package."
When I press OK, the warning disappeares, nothing happens.
I have .NET Framework 2.0, running VS2005 Prof. with no problem, had MS SQL Server 2005 Express Edition, but uninstalled it (never used), and just installed the latest MSI.
Searched the net for the "error 193" message, but haven't found anything that actually could help my case.
I have a problem installing SQL Server 2005 Developer Edition.
When I start the setup, I get the message:
"SQL Server Setup could not run. Another instance of SQL Server Setup is already running. The running instance must complete before you can run SQL Server Setup again"
I am using Windows XP and have SQL Server 2000 and SQL Server Express 2005 installed.
I shut down both instances before I attempted to do the install but I still get the message.
I checked active tasks but no tasks with SQL* is running.
I downloaded the 2 CD ISO Format from msdn to install SQL Server 2005 English Developer Edition on my XP SP2 box.
I currently have SQL 2000 running. So Sql Server 2005 Dev Edition is to run side by side in a named instance.
From CD1, I launched default.hta and could not install Database Services. The log mentioned could not find a 'valid copy of xxx.msi' where xxx is VSS writer, Database Services or SQL XML4 etc...
I tried 3 times and each time it damaged my SQL2000 beyond repair.
Hello, I hope someone knows the answer to this issue. I am trying to install SQL Server 2000 Developer Edition and once I get to the screen that is asking for the SQL Server instance and Login Information I receive the following error when trying to proceed.
(Report Server database is a different version and cannot be used for this installation)
I have installed reporting services 2000 developer edition many times and I have never seen this error.
I am installing SQL 2005 developer edition on windows 2000. The server met all requirements for the installation. I get an €œUnexpected error occurred€? at the end of the installation right when the SQL engine installation is completed.
Looking at the error logs, on the setup0001 (core) file I get the following error: Has anyone encountered this :
Source File Name: sqlchainingsqlchainingactions.cpp Compiler Timestamp: Thu Sep 1 22:23:05 2005 Function Name: sqls::ReportChainingResults::perform Source Line Number: 2992
Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "watsonFailedActionErrorCode" {"SetupStateScope", "", ""} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupStateScope.watsonFailedActionErrorCode Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupStateScope" Failed to create CAB file due to datastore exception Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "watsonFailedActionErrorCode" {"SetupStateScope", "", ""} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupStateScope.watsonFailedActionErrorCode Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupStateScope" Message pump returning: 1602
I've installed Windows 2003 SP2 in a stand-alone cluster (will be adding a second node later). I'm now installing SQL Server 2005 Developer Edition 64-bit extended and would like to have the "Create a SQL Server Failover Cluster" box to not be grayed out. Even when I check the "SQL Server Database Services" box, it still has the cluster box grayed out.
I am unable to successfully install SQL Server 2005 Developer edition here on a machine at work. Database service and client tools fails to install. I get the message that:"The computer running SQL Server setup does not meet the minimum system requirements for this SQL server release. Microsoft SQL Server is not supported by this operating system."
I am running Win XP pro sp2 with all the latest updates installed. What could be causing this and how do I fix it?
I am having this problem since I installed the new windows Vista.
I am trying to install the SQL Server 2005 developer edition on Windows Vista, but After installation finish successfuly I open the start menu to surprise that I could not find the Shortcuts to open the SQL Server and create new database and tables etc... I opened the full path of the exe files "C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDE" but there are not any file there, even that I searched for the exe files names but they are not existed. It looks that after instalation complete that the SQL Server is not installed on Windows Vista.
So, my question is: After installing the SQL Server 2005 SP2 for windows Vista, will the problem be solved? Or there is something else to do ON WINDOWS VISTA.
Please, I need the answer for this problem, because I need to work on SQL Server 2005 very hard.
I have just installed Visual Studio 2005, but I cannot install MS Sql Server 2005 at all. It gives me an error that says look in Program FilesMS SQL Server90Setup BootstrapLOGFiles and there is a file which contains the following:
Microsoft SQL Server 2005 Setup beginning at Sat Dec 22 11:51:30 2007 Process ID : 6068 j:5810c5ab299ece9157setup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/11/22 11:51:29 Complete: LoadResourcesAction at: 2007/11/22 11:51:29, returned true Running: ParseBootstrapOptionsAction at: 2007/11/22 11:51:29 Loaded DLL:j:5810c5ab299ece9157xmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/11/22 11:51:30, returned false Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run: Could not parse command line due to datastore exception. Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Fri Jul 29 01:13:55 2005 Function Name: writeEncryptedString Source Line Number: 124 ---------------------------------------------------------- writeEncryptedString() failed Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Fri Jul 29 01:13:55 2005 Function Name: writeEncryptedString Source Line Number: 123 ---------------------------------------------------------- Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: cryptohelpercryptsameusersamemachine.cpp Compiler Timestamp: Mon Jun 13 14:30:00 2005 Function Name: sqls::CryptSameUserSameMachine:rotectData Source Line Number: 50 2 Could not skip Component update due to datastore exception. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "6068"} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.InstallMediaPath Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupBootstrapOptionsScope" Running: ValidateWinNTAction at: 2007/11/22 11:51:30 Complete: ValidateWinNTAction at: 2007/11/22 11:51:30, returned true Running: ValidateMinOSAction at: 2007/11/22 11:51:30 Complete: ValidateMinOSAction at: 2007/11/22 11:51:30, returned true Running: PerformSCCAction at: 2007/11/22 11:51:30 Complete: PerformSCCAction at: 2007/11/22 11:51:30, returned true Running: ActivateLoggingAction at: 2007/11/22 11:51:30 Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run: Datastore exception while trying to write logging properties. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupStateScope.primaryLogFiles Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupStateScope" 00EFCFC4Unable to proceed with setup, there was a command line parsing error. : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.InstallMediaPath Source Line Number: 44 Class not registered. Failed to create CAB file due to datastore exception Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "6068"} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.HostSetup Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupBootstrapOptionsScope" Message pump returning: 2
Also, the SQL Server express also did not install at all when I was installing VS 2005 Pro.
I have a brand new Visual Studio 2005 box that set up correctly until I tried to install SQL Server. I get get this script error when I insert the cd - "ClassFactory cannot supply the requested class" How do I work around this?
I am trying to install sql server 2005 express edition.But i get an error stating that
sql server setup unexpectedly failed. For more information review the detup summary log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGsummary.txt
Summary.txt looks like this.It has only these 3 lines of information nothing else other this, which i have seen in many posts.
Microsoft SQL Server 2005 9.00.3042.00 ============================== OS Version : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600) Time : Tue Apr 03 22:36:33 2007
I am using windows xp. Probably many of you might have had this problem.Could anyone please provide me with some help.Thanks in advance.
Is it possible to connect SSRS running on SQL Server 2005 enterprise edition (our production system) to a database running on SQL Server 2005 Developer's edition (our test system)
I was successfully able to installing sql server 2005 developer edition all peices except the "Workstation Component, Book Online, Development Tool", the last item in the installation list. It gave errror for bad sql.cab file. Although this developer edition came directly of the box this error came up in many attempts. Upon "Ignore" it gives error 2350.
I am able to run sql server's all the services and able to access it via VS.Net server browser. I can create and change tables etc. but there is no "Management Studio" installed. There is no icon for it either on the desktop or in the Start->SQL Server 2005 menu.
Is it possible to get and copy sql.cab file or entire client component from somewhere else? --Freed download or something? I searched for sql.cab file but it was not in the CD. It could be inside some other file or cmpressed.
Hi I am interested in taking MCTS exam 70-431 for sql server 2005 implementation and maintainance. I have been reading the hardware requirements for the instalation of sql server versions and realise that enterprise and developer editions have same minimum requirements for the operation system. I understand that the Developer Edition includes all the functionality of SQL Server 2005 Enterprise Edition, but it is licensed for use as a development and test system, not as a production server.
Also I undestand that the developer edition supports the Windows XP Home Edition with SP2 or later but the enterprise edition does not support this operating system. The evaluation/trial version is for the enterprise edition. Can I use the developer version of sql server 2005 for my practice exercises instead of using the trial version? I have all hardware requirements for the trial enterprise version except that I am using Microsoft windows Xp home edition version 2002 with SP2. I am trying to see if I can use the developer version of sql server 2005 as it is cheaper for me to buy this software than buying the new operating system for my computer. According to the microsoft book for the MCTS exam 70-431 there is a section which states that before you begin you should have Microsoft Windows Server 2003 running on your computer on an NTFS file system (NTFS) partition. Will I still be ok to use the book and be able to do all the tests in the book if i am using the developer version of sql server 2005 with my Microsoft windows Xp home edition than using the trial version which comes with the book?
As an ISV, I want to certify my product on Standard Edition. I am using Developer Edition everywhere. Is there a way I can do the certification using the Developer Edition, or do I need to obtain/purchase a copy of the Standard Edition?
We have an existing installation of SQL Server 2005 Developer Edition (64bit) that we are ready to go live with and would like to change the edition to Enterprise Edition (64bit). We have purchased all the appropriate licenses. We would like to avoid UN-installing the Developer Edition and RE-installing the Enterprise Edition. There must be some way to change a registry key, provide your serial number via a command line utility or re-run the setup with the license key provided and direct it to just change the edition from Developer to Enterprise and not change any of the other settings like service account, sa account, collation, etc. Any help is most appreciated.
I'm trying to register a developer's 2000 pc from my 2005 pc.
i'm not sure this is even something possible from Dev Edition to Dev Edition- I can register a 2000 server just fine.
I can ping him. Both our systems have remote access 'on'. His server is (local), i've tried connecting to it by just entering his machine name and by using just the ip address. The error I get is "timeout expired. The timeout elapsed prior to completion of the operation or the server is not responding."
Am I just not registering this properly? I entered just the ip address in the 'server' box. I am connecting as sa with the pw he gave me. When i connect to my server, I use the ip addressinstance. However, I am not sure what to use for the instance when all I see when I look at his machine is (local).
I am attempting to install SQL Server 2005 on a Laptop with Windows 2003 Standard Edition.
The installation fails and the File Summary.txt has the following entries:
Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790) Time : Fri Nov 30 09:36:53 2007
Machine : SAPDEMO Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : SAPDEMO Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : SAPDEMO Product : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : SAPDEMO Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_2.log -------------------------------------------------------------------------------- Machine : SAPDEMO Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine : SAPDEMO Product : Microsoft SQL Server 2005 Books Online (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_BOL_1.log -------------------------------------------------------------------------------- Machine : SAPDEMO Product : SQLXML4 Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLXML4_1.log -------------------------------------------------------------------------------- SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
I tried to download PerformancePoint Server Trial Version to ther server today and I got to the configuration point of the Analysis Services Setting, and when I clicked next to proceed with the configuration I got a popup error message: "Microsoft Analysis Server must be Evaluation, Developer or Enterprise Edition".
Now I have SQL Server 2005 Developer Edition Disc (Bought it with Visual Studio 2005) but on the server I have SQL Server 2005 Standard Edition, if I try to run the sql server developer Edition disc, I use the wizard download and it seems that the download is going through the SQL Server entire download, it's like I'm re-downloading SQL Server all over again.
Does that seem right? what is the best approach to work around this probelm?
Hello , This morning I was running a report in my ssrs and I had a power failure. My Machine rebooted and I can not connect to my database below is the error log can some one tell me what I need to do to recover I really do not want to have to reinstall everything if possible. 2007-06-15 07:59:49.88 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2) 2007-06-15 07:59:49.88 Server (c) 2005 Microsoft Corporation.2007-06-15 07:59:49.88 Server All rights reserved.2007-06-15 07:59:49.88 Server Server process ID is 1600.2007-06-15 07:59:49.88 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.2007-06-15 07:59:49.90 Server This instance of SQL Server last reported using a process ID of 880 at 6/14/2007 5:36:25 PM (local) 6/14/2007 9:36:25 PM (UTC). This is an informational message only; no user action is required.2007-06-15 07:59:49.90 Server Registry startup parameters:2007-06-15 07:59:49.90 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf2007-06-15 07:59:49.90 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG2007-06-15 07:59:49.90 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf2007-06-15 07:59:50.01 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.2007-06-15 07:59:50.01 Server Detected 1 CPUs. This is an informational message; no user action is required.2007-06-15 07:59:50.36 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.2007-06-15 07:59:50.46 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.2007-06-15 07:59:51.16 Server The Microsoft Distributed Transaction Coordinator (MS DTC) service could not be contacted. If you would like distributed transaction functionality, please start this service.2007-06-15 07:59:51.25 Server Database Mirroring Transport is disabled in the endpoint configuration.2007-06-15 07:59:51.29 spid5s Starting up database 'master'.2007-06-15 07:59:51.70 spid5s WARNING: did not see LOP_CKPT_END.2007-06-15 07:59:51.70 spid5s Error: 3414, Severity: 21, State: 2.2007-06-15 07:59:51.70 spid5s An error occurred during recovery, preventing the database 'master' (database ID 1) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.2007-06-15 07:59:51.70 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
If I do the installation with the default path the installation goes fine or else the Installation fails with a fatal error. I have pasted the error log below :
Microsoft SQL Server 2005 Setup beginning at Mon Aug 21 22:13:33 2006 Process ID : 3060 C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2006/7/21 22:13:33 Complete: LoadResourcesAction at: 2006/7/21 22:13:33, returned true Running: ParseBootstrapOptionsAction at: 2006/7/21 22:13:33 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2006/7/21 22:13:33, returned true Running: ValidateWinNTAction at: 2006/7/21 22:13:33 Complete: ValidateWinNTAction at: 2006/7/21 22:13:33, returned true Running: ValidateMinOSAction at: 2006/7/21 22:13:33 Complete: ValidateMinOSAction at: 2006/7/21 22:13:33, returned true Running: PerformSCCAction at: 2006/7/21 22:13:33 Complete: PerformSCCAction at: 2006/7/21 22:13:33, returned true Running: ActivateLoggingAction at: 2006/7/21 22:13:33 Complete: ActivateLoggingAction at: 2006/7/21 22:13:33, returned true Running: DetectPatchedBootstrapAction at: 2006/7/21 22:13:33 Complete: DetectPatchedBootstrapAction at: 2006/7/21 22:13:33, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__3060" returned false. Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions: Condition "Setup is running locally." returned true. Running: PerformDotNetCheck2 at: 2006/7/21 22:13:33 Complete: PerformDotNetCheck2 at: 2006/7/21 22:13:33, returned true Running: InvokeSqlSetupDllAction at: 2006/7/21 22:13:33 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0 <Func Name='DwLaunchMsiExec'> Examining 'sqlspars' globals to initialize 'SetupStateScope' Opening 'MachineConfigScope' for [LHDQSKUMARR] Trying to find Product Code from command line or passed transform If possible, determine install id and type Trying to find Instance Name from command line. Instance Name = LOCALDEV2005 Trying to find install through Instance Name Install Type = 1 If possible, determine action Machine = LHDQSKUMARR, Article = WMIServiceWin32OSWorking, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = WMIServiceReadRegWorking, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = WMIServiceCIMDataWorking, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = XMLDomDocument, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = Processor, Result = 70010 (0x1117a) Machine = LHDQSKUMARR, Article = PhysicalMemory, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = DiskFreeSpace, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = OSVersion, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = OSServicePack, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = OSType, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = iisDep, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = AdminShare, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = PendingReboot, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = PerfMon, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = IEVersion, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = DriveWriteAccess, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = COMPlus, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = ASPNETVersionRegistration, Result = 0 (0x0) Machine = LHDQSKUMARR, Article = MDAC25Version, Result = 0 (0x0) ******************************************* Setup Consistency Check Report for Machine: LHDQSKUMARR ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: Warning Description: Minimum hardware requirements are not met, therefore, some components may not perform as expected. Action: Make sure minimum hardware requirements are met. Please refer to the readme for minimum requirements. Article: IIS Feature Requirement, Result: CheckPassed Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 0 <EndFunc Name='PerformDetections' Return='0' GetLastError='0'> Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 <EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'> Complete: InvokeSqlSetupDllAction at: 2006/7/21 22:13:54, returned true Running: SetPackageInstallStateAction at: 2006/7/21 22:13:54 Complete: SetPackageInstallStateAction at: 2006/7/21 22:13:54, returned true Running: DeterminePackageTransformsAction at: 2006/7/21 22:13:55 Complete: DeterminePackageTransformsAction at: 2006/7/21 22:13:55, returned true Running: ValidateSetupPropertiesAction at: 2006/7/21 22:13:55 Complete: ValidateSetupPropertiesAction at: 2006/7/21 22:13:55, returned true Running: OpenPipeAction at: 2006/7/21 22:13:55 Complete: OpenPipeAction at: 2006/7/21 22:13:55, returned false Error: Action "OpenPipeAction" failed during execution. Running: CreatePipeAction at: 2006/7/21 22:13:55 Complete: CreatePipeAction at: 2006/7/21 22:13:55, returned false Error: Action "CreatePipeAction" failed during execution. Action "RunRemoteSetupAction" will be skipped due to the following restrictions: Condition "Action: CreatePipeAction has finished and passed." returned false. Running: PopulateMutatorDbAction at: 2006/7/21 22:13:56 Complete: PopulateMutatorDbAction at: 2006/7/21 22:13:56, returned true Running: GenerateRequestsAction at: 2006/7/21 22:13:56 SQL_Engine = 3 SQL_Data_Files = 3 SQL_Replication = -1 SQL_FullText = 3 SQL_SharedTools = 3 SQL_BC_DEP = 3 Analysis_Server = -1 AnalysisDataFiles = -1 AnalysisSharedTools = -1 RS_Server = -1 RS_Web_Interface = -1 RS_SharedTools = -1 Notification_Services = 3 NS_Engine = 3 NS_Client = 3 SQL_DTS = 3 Client_Components = 3 Connectivity = 3 SQL_Tools90 = 3 SQL_WarehouseDevWorkbench = -1 SDK = -1 SQLXML = -1 Tools_Legacy = 3 TOOLS_BC_DEP = 3 SQL_Documentation = 3 SQL_BooksOnline = 3 SQL_DatabaseSamples = -1 SQL_AdventureWorksSamples = 3 SQL_AdventureWorksDWSamples = -1 SQL_AdventureWorksASSamples = -1 SQL_Samples = 3 Complete: GenerateRequestsAction at: 2006/7/21 22:13:57, returned true Running: CreateProgressWindowAction at: 2006/7/21 22:13:57 Complete: CreateProgressWindowAction at: 2006/7/21 22:13:57, returned true Running: ScheduleActionAction at: 2006/7/21 22:13:57 Complete: ScheduleActionAction at: 2006/7/21 22:13:58, returned true Skipped: InstallASAction.11 Skipped: Action "InstallASAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.18 Skipped: Action "InstallASAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.22 Skipped: Action "InstallASAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.9 Skipped: Action "InstallASAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result. Running: InstallDTSAction.11 at: 2006/7/21 22:13:58 Installing: sqlsupport on target: LHDQSKUMARR Complete: InstallDTSAction.11 at: 2006/7/21 22:14:0, returned true Running: InstallDTSAction.12 at: 2006/7/21 22:14:0 Installing: sqlncli on target: LHDQSKUMARR Complete: InstallDTSAction.12 at: 2006/7/21 22:14:2, returned true Running: InstallDTSAction.18 at: 2006/7/21 22:14:2 Installing: owc11 on target: LHDQSKUMARR Complete: InstallDTSAction.18 at: 2006/7/21 22:14:4, returned true Running: InstallDTSAction.22 at: 2006/7/21 22:14:4 Installing: bcRedist on target: LHDQSKUMARR Complete: InstallDTSAction.22 at: 2006/7/21 22:14:7, returned true Running: InstallDTSAction.9 at: 2006/7/21 22:14:7 Installing: msxml6 on target: LHDQSKUMARR Complete: InstallDTSAction.9 at: 2006/7/21 22:14:8, returned true Running: InstallNSAction.11 at: 2006/7/21 22:14:8 Installing: sqlsupport on target: LHDQSKUMARR Complete: InstallNSAction.11 at: 2006/7/21 22:14:10, returned true Running: InstallNSAction.12 at: 2006/7/21 22:14:10 Installing: sqlncli on target: LHDQSKUMARR Complete: InstallNSAction.12 at: 2006/7/21 22:14:12, returned true Running: InstallNSAction.18 at: 2006/7/21 22:14:12 Installing: owc11 on target: LHDQSKUMARR Complete: InstallNSAction.18 at: 2006/7/21 22:14:21, returned true Running: InstallNSAction.22 at: 2006/7/21 22:14:22 Installing: bcRedist on target: LHDQSKUMARR Complete: InstallNSAction.22 at: 2006/7/21 22:14:24, returned true Running: InstallNSAction.9 at: 2006/7/21 22:14:24 Installing: msxml6 on target: LHDQSKUMARR Complete: InstallNSAction.9 at: 2006/7/21 22:14:25, returned true Skipped: InstallRSAction.11 Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result. Skipped: InstallRSAction.18 Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result. Skipped: InstallRSAction.22 Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result. Running: InstallSqlAction.11 at: 2006/7/21 22:14:26 Installing: sqlsupport on target: LHDQSKUMARR Complete: InstallSqlAction.11 at: 2006/7/21 22:14:28, returned true Running: InstallSqlAction.12 at: 2006/7/21 22:14:28 Installing: sqlncli on target: LHDQSKUMARR Complete: InstallSqlAction.12 at: 2006/7/21 22:14:30, returned true Running: InstallSqlAction.18 at: 2006/7/21 22:14:30 Installing: owc11 on target: LHDQSKUMARR Complete: InstallSqlAction.18 at: 2006/7/21 22:14:32, returned true Running: InstallSqlAction.21 at: 2006/7/21 22:14:32 Installing: sqlwriter on target: LHDQSKUMARR Complete: InstallSqlAction.21 at: 2006/7/21 22:14:34, returned true Running: InstallSqlAction.22 at: 2006/7/21 22:14:34 Installing: bcRedist on target: LHDQSKUMARR Complete: InstallSqlAction.22 at: 2006/7/21 22:14:36, returned true Running: InstallSqlAction.9 at: 2006/7/21 22:14:36 Installing: msxml6 on target: LHDQSKUMARR Complete: InstallSqlAction.9 at: 2006/7/21 22:14:38, returned true Running: InstallToolsAction.11 at: 2006/7/21 22:14:38 Installing: sqlsupport on target: LHDQSKUMARR Complete: InstallToolsAction.11 at: 2006/7/21 22:14:41, returned true Running: InstallToolsAction.12 at: 2006/7/21 22:14:41 Installing: sqlncli on target: LHDQSKUMARR Complete: InstallToolsAction.12 at: 2006/7/21 22:14:43, returned true Skipped: InstallToolsAction.13 Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis: No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result. Running: InstallToolsAction.18 at: 2006/7/21 22:14:43 Installing: owc11 on target: LHDQSKUMARR Complete: InstallToolsAction.18 at: 2006/7/21 22:14:46, returned true Running: InstallToolsAction.20 at: 2006/7/21 22:14:46 Installing: BOL on target: LHDQSKUMARR Complete: InstallToolsAction.20 at: 2006/7/21 22:15:36, returned true Running: InstallToolsAction.22 at: 2006/7/21 22:15:36 Installing: bcRedist on target: LHDQSKUMARR Complete: InstallToolsAction.22 at: 2006/7/21 22:15:38, returned true Running: InstallToolsAction.9 at: 2006/7/21 22:15:38 Installing: msxml6 on target: LHDQSKUMARR Complete: InstallToolsAction.9 at: 2006/7/21 22:15:40, returned true Running: InstallDTSAction at: 2006/7/21 22:15:40 Installing: dts on target: LHDQSKUMARR Failed to install package Fatal error during installation. Setting package return code to: 1603 Complete: InstallDTSAction at: 2006/7/21 22:16:30, returned false Error: Action "InstallDTSAction" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Running: InstallNSAction.10 at: 2006/7/21 22:16:30 Installing: sqlxml4 on target: LHDQSKUMARR Complete: InstallNSAction.10 at: 2006/7/21 22:16:32, returned true Running: InstallSqlAction at: 2006/7/21 22:16:32 Installing: sql on target: LHDQSKUMARR ******* Got commit request from MSI ******* Complete: InstallSqlAction at: 2006/7/21 22:19:4, returned true Skipped: InstallToolsAction.10 Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis: No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result. Skipped: InstallASAction Skipped: Action "InstallASAction" was not run. Information reported during analysis: No install request found for package: "as", install will be skipped as a result. Running: InstallNSAction at: 2006/7/21 22:19:4 Installing: ns on target: LHDQSKUMARR Failed to install package Fatal error during installation. Setting package return code to: 1603 Complete: InstallNSAction at: 2006/7/21 22:20:17, returned false Error: Action "InstallNSAction" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Skipped: InstallRSAction Skipped: Action "InstallRSAction" was not run. Information reported during analysis: No install request found for package: "rs", install will be skipped as a result. Running: InstallToolsAction at: 2006/7/21 22:20:17 Installing: tools on target: LHDQSKUMARR Failed to install package Fatal error during installation. Setting package return code to: 1603 Complete: InstallToolsAction at: 2006/7/21 22:22:8, returned false Error: Action "InstallToolsAction" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Skipped: RepairForBackwardsCompatRedistAction Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis: No install request found for package: "bcRedist", install will be skipped as a result. Skipped: UninstallForMSDE2000Action Skipped: Action "UninstallForMSDE2000Action" was not run. Information reported during analysis: No install request found for package: "patchMSDE2000", install will be skipped as a result. Skipped: UninstallForSQLAction Skipped: Action "UninstallForSQLAction" was not run. Information reported during analysis: No install request found for package: "patchLibertySql", install will be skipped as a result. Skipped: UninstallForRS2000Action Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis: Action: "UninstallForRS2000Action" will be skipped due to the following condition: Condition "Action: InstallRSAction was skipped." returned true. Running: ReportChainingResults at: 2006/7/21 22:22:9 Error: Action "ReportChainingResults" threw an exception during execution. One or more packages failed to install. Refer to logs for error details. : 1603 Error Code: 0x80070643 (1603) Windows Error Text: Fatal error during installation.
Source File Name: sqlchainingsqlchainingactions.cpp Compiler Timestamp: Thu Sep 1 22:23:05 2005 Function Name: sqls::ReportChainingResults::perform Source Line Number: 3097
I have a pentium PC with 599 MHZ speed and 1.5 GB of RAM with Windowsxp SP2. I already have an instance of SQL 2005 running at my box. Let me know if you need any more logs. When I tried to start the sql server it is working fine.
I am currently downloading the mega-sized files for SQL Server 2005 Express Edition and was wondering if I was going to be able to install it onto my workstation alongside the SQL Server 2005 Developer Edition? Was hoping someone could advise. I did browse for an answer, but have not come across it yet. I know I'll find out once my download is complete, but that could be awhile :)
Hi -I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine. Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM. I want to use partition function with the enterprise edition, will the trial version of sql server work for me? -If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database? - Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
hello eveyone..i have just downloaded and installed the visaul web developer 2005 express edition and sqlserver 2005 express edition.On top of that i even downloaded and installed the northwind database.But my problem is when i am connecting to the northwind database by clicking toos menu>connect to the database>choose datasource>new connection>..i have provided it with the required information..but as soon as i press "Test Connection" button the following error box displays.. "an error has occured while establishing a connection to the server.when connecting to the sql server2005,this failure may be caused by the fact that under default settings sql server doestnot allow remote connections.(provider:Named piped providers,error:40-couldnot open a connection to sqlserver.)" i have no idea whats is all about..can anyone get me pass this error..
I've done this before but it's been sometime. When I finish installing the MS SQL Server 2005 Developer edition, all I see under the Microsoft SQL Server 2005 folder in the All Programs is Configuration Tools with the following shortcuts: Notification Services Command PromptSQL Server Configuration ManagerSQL Server Error and Usage ReportingSQL Server Surface Area Configuration The are a whole bunch of other programs inside the Microsoft SQL Server 2005 folder that are missing. How do I add those services or program such as the Microsoft SQL Server Management Studio?
Hello, When installing SQL Server 2005 developer, I get the error: Product : Visual Studio Integrated Development Environment 2005Error : Internal Error 2356. _14248_Microsoft_VC80_MFC_x86.msm Any idea why this is happening? Thanks.
