I've just installed a replication between 2 NT4 servers with SQL 6.5. A task with a 'distribution' type, owner = repl_subscriber, has started on the subscriber side but crashes with an error code S0001 : "There is already an object named 'Customer' in the database". 'Customer' is one of the tables that I want to replicate. Why do I get this error? And how to correct it? Thanks.
View 1 RepliesReplication Distribution Agent often dies with the following log entry. At that hour little is ever going on so I am surprised that the error occurs.
Failed Job -> JobName: Instance1-DB1-Instance2-33, StepName: Run agent., Message: Timeout expired. NOTE: The step was retried the requested number of times (10) without succeeding. The step failed..
Any ideas where to start?
Thanks
On SQL Server 2005 SP2 for Publisher and Distributor on the same instance, my old snapshots are not being cleaned up.
The following error is in the agent history:
Executed as user: DomainMyUser. Could not remove directory '\vmsql01ReplDatauncPublication_TRANSACTIONAL20070702104416'. Check the security context of xp_cmdshell and close other processes that may be accessing the directory. [SQLSTATE 42000] (Error 20015). The step failed.
xp_cmdshell is enabled and I can run commands like :
exec master.dbo.xp_cmdshell ' md c:TestFolder'
The permissions to the snapshot share and file system are that DomainMyUser has full control.
I have logged into the machine as this user and can remove snapshots so it does not seem to be a permission issue.
On other machines I do not get any errors but the snapshot folder still is not cleaned up.
Any suggestion as to what the problem could be?
Thanks,
Amy
I have setup a replication and after 24 hours this are the error messages I have got:Last action; The database 'supersite' on server 'solomon' does not exist. Full error message: Could not locate entry in sysdatabases for database 'superiste'. No entry found with that name.Make sure that the name is entered correctly. Can anyone out there help me out?
View 1 Replies View RelatedI am attempting to set up Distribution on SQL 2005 using the wizard.
All goes well until the actual script fires off... this line:
use master
exec sp_adddistributor @distributor = N'NAVSOLDEVSQLSERVER2005', @password = N''
GO
Causes this error:
Msg 22538, Level 16, State 1, Procedure sp_MSrepl_check_job_access, Line 155
Only replication jobs or job schedules can be added, modified, dropped or viewed through replication stored procedures.
The rest of the script fails due to this line... Now, I am fair at SQL, but I am no DBA. I did some searching and found one post that seemed to have the same problem, and the gentleman solved it himself, but did not explain how lol.
Any help greatly appreciated!
Dave Borneman
I have a very strange error (included at the end of message) and it seems to indicate that I have not installed the SQL Server correctly - perhaps the wrong version. I have re-run the configuration a couple of times with no effect. I have not removed the server and re-installed yet. I have Here is my version info:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
TITLE: Microsoft SQL Server Management Studio
------------------------------
Could not start the wizard.
------------------------------
ADDITIONAL INFORMATION:
Could not load file or assembly 'ConfigureDistWizard, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (mscorlib)
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I've been using replication for a long while now but have never come across this error. It's a basic transactional replication from ServerA to ServerB, where ServerA is also the distributor. Everything had been running fine on it until yesterday, when this error started popping up and no further transactions could be delivered.
After some quick googling I was able to determine that the distribution agent account needed write access to C:Program FilesMicrosoft SQL Server100Com. According to the MSFT article it's because the distribution agent is running under a non-default profile. I didn't change this. However, what I did change around the time that these errors started occurring was the server's Replication Max Test Size setting. It would be far too coincidental for this to not be the cause, but what I don't understand is *why* that would have changed it.
how do I change this? It is definitely not preferable to create temp files in this directory in our environment.
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
Hi,
View 5 Replies View RelatedI am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies View RelatedMy apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
where can i find it?
thanks
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedI have a SQL Express database on our server that is used for one of our websites when the website tries to write to the database I get the following error: -
An attempt to attach an auto-named database for file D:lahwebsitesGiants North Walesapp_datadatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This error is very frustrating and I really can't find a way around it. I have done the following: -
Deleted the SQL Server Express folders under user preferences
Hi,I am trying to write some C# ASP.NET 2.0 code. I have created a web form to send data to my sql server 2005 database. When I compile the application and insert data then click on the submit button I get this error
"A first chance exception of type
'System.Data.SqlClient.SqlException' occurred in System.Data.dll" I have been trying to solve this for a few days now with no luck, so any help would be appreciated. I'll post below the source code of the web form (addOrder.aspx). It might be worth mentioning that I have created another web form in the same project called addCustomer.aspx. Like addOrder.aspx it is a web form, however it successfully inserts data in the database. 1 <%@ Page Language="C#" MasterPageFile="~/Default.master" Title="Add Order Page" %>
2 <%@ import namespace="System.Data.SqlClient" %>
3 <%@ Import Namespace="System.Data" %>
4 <%@ Import Namespace="System.Web" %>
5 <%@ Import Namespace="System.Configuration"%>
6 <%@ Import Namespace="System.Globalization"%>
7
8 <script runat="server">
9
10 protected void Page_Load(object sender, EventArgs e)
11 {
12
13 }
14
15 protected void sumbitButton_Click(object sender, EventArgs e)
16 {
17 SqlConnection conn;
18 SqlCommand comm;
19 string connectionString =
20 ConfigurationManager.ConnectionStrings[
21 "ShippingSystemConnectionString1"].ConnectionString;
22 conn = new SqlConnection(connectionString);
23 comm = new SqlCommand(
24 "INSERT INTO Order(CustomerID, " +
25 "NumberofItems, DescriptionsofItems, SafeItems) " +
26 "VALUES (@CustomerID, " +
27 "@NumberofItems, @DescriptionsofItems, @SafeItems)", conn);
28 comm.Parameters.Add("@CustomerID", System.Data.SqlDbType.Int);
29 comm.Parameters["@CustomerID"].Value = int.Parse(DropDownList1.SelectedValue);
30 comm.Parameters.Add("@NumberofItems", System.Data.SqlDbType.Int);
31 comm.Parameters["@NumberofItems"].Value = numofitemstxt.Text;
32 comm.Parameters.Add("@DescriptionsofItems", System.Data.SqlDbType.VarChar);
33 comm.Parameters["@DescriptionsofITems"].Value = descofitemstxt.Text;
34 comm.Parameters.Add("@SafeItems", System.Data.SqlDbType.VarChar);
35 comm.Parameters["@SafeItems"].Value = safetxt.Text;
36 try
37 {
38 conn.Open();
39 comm.ExecuteNonQuery();
40 Response.Redirect("Success.aspx");
41 }
42 catch
43 {
44 }
45 finally
46 {
47 conn.Close();
48 }
49 }
50
51
52
53 protected void CustomerIDList_SelectedIndexChanged(object sender, EventArgs e)
54 {
55
56 }
57 </script>
58
59 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
60 <table style="position: static">
61 <tr>
62 <td style="width: 169px">
63 Customer ID:</td>
64 <td style="width: 100px">
65 <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
66 DataTextField="CustomerID" DataValueField="CustomerID" Style="position: static">
67 </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ShippingSystemConnectionString1 %>"
68 SelectCommand="SELECT [CustomerID] FROM [Customer]"></asp:SqlDataSource>
69 </td>
70 <td style="width: 178px">
71 </td>
72 </tr>
73 <tr>
74 <td style="width: 169px">
75 Number of Items:</td>
76 <td style="width: 100px">
77 <asp:TextBox ID="numofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
78 <td style="width: 178px">
79 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="numofitemstxt"
80 ErrorMessage="Number of Items Required" Style="position: static"></asp:RequiredFieldValidator></td>
81 </tr>
82 <tr>
83 <td style="width: 169px">
84 Descriptions of Items:</td>
85 <td style="width: 100px">
86 <asp:TextBox ID="descofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
87 <td style="width: 178px">
88 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="descofitemstxt"
89 ErrorMessage="Description Required" Style="position: static"></asp:RequiredFieldValidator></td>
90 </tr>
91 <tr>
92 <td style="width: 169px">
93 Are Items safe:</td>
94 <td style="width: 100px">
95 <asp:TextBox ID="safetxt" runat="server" Style="position: static"></asp:TextBox></td>
96 <td style="width: 178px">
97 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="safetxt"
98 ErrorMessage="Are Items Safe?" Style="position: static"></asp:RequiredFieldValidator></td>
99 </tr>
100 <tr>
101 <td style="width: 169px">
102 <asp:ValidationSummary ID="ValidationSummary1" runat="server" Style="position: static" />
103 </td>
104 <td style="width: 100px">
105 <asp:Button ID="sumbitButton" runat="server" OnClick="sumbitButton_Click" Style="position: static"
106 Text="Submit" /></td>
107 <td style="width: 178px">
108 </td>
109 </tr>
110 </table>
111 </asp:Content>
112
113
My order table in SQL server 2005 (express) looks like this:
Hello-
I have the following sql statement which produced an error when I add the order by clause
SQL = "SELECT DISTINCT nc_department.department, Count(nonconformance.department_id) as 'events', ISNULL(SUM(nonconformance.nc_wafer_qty),0) as wafers FROM nc_department LEFT OUTER JOIN nonconformance ON nc_department.department_id = nonconformance.department_id WHERE nc_department.active = '1' GROUP BY nc_department.department ORDER by nc_department.order_id"
This is the error I get:
ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
Any help appreciated
I'm catching a primary constraint error in SQL and don't want to return the SQL error message back to the client. Is there any way to stop this. Thankyou
View 5 Replies View RelatedI need help on this!
When I try to change the data from a table using Web Matrix, then I get this error message.
The table’s data cannot be edited because the table does not contain modifiable columns.
As I need to edit the data’s, how can I solve this?
Thanks for Your Help
Mikel
I finally installed MSDE and have the icon in my tray at the bottom of the screen.
When I try to connect to a database using the wizard in the web matrix program I get this message:
Unable to connect
SQL Server does not exist of access denied
Connection Open (Connect ())
What might be wrong??
Thanks for your help I'll get it soon (I hope)
Del Dobbs
HI FRIENDS
WHEN I TRY TO RUN A PROGRAM WHICH BINDS A DATAGRID CONTROL TO A SQL SERVER TABLE I GET A ERROR MESSAGE LIKE [SQL EXECEPTION LOGIN FAILED FOR HOMECOMPUTER/ASPNET] . IF U KNOW WHAT MIGHT COZ THE PROBLEM PLEASE TELL ME.
IAM RUNNING THE MICROSOFT SQL SERVER FORM MY HOME COMPUTER I.E (LOCAL) . IS THERE SOME SETTINGS THAT I NEED TO DO BEFORE RUNNING A PAGE WHICH CONNECTS TO THE SQL SERVER.
I am trying to set a text field as the primary key for a SQL SERVER Express 2005 Database in Visual Studio. I used the following Command:ALTER TABLE Tablename ADD PRIMARY KEY (fieldname);where you substitute table name and fieldname for the appropriate fields. The error message I am getting is:SQL Execution Error.Executed SQL statement: ALTER TABLE Lake ADD PRIMARY KEY(wbic);Error Source .Net SqlClient Data ProviderError Message: Column 'wbic' in table Lake is of a type that is invalid for use as a primary key column or index.Could not create constraint. See previous errors.How can I fix this so any type of field can be a primary key?
View 7 Replies View RelatedI am extracting data out of Lotus Notes into an Oracle DB using EM.
I keep getting an error "[Lotus][ODBC Lotus Notes] Data value is not a valid date, time or timestamp" I went ahead and dropped the destination table, and changed all of the "date" columns to varchar's, redefined the transformation, and executed package again, but still get the error. Any ideas?
Thanks!
BV
Has anyone seen these error messages.....
17066: SQL Server Assertion: File: <proc.c>, line=1927
Failed Assertion = 'm_activeSdesList.Head () == NULL'.
and
1203, Severity: 20 State: 1
Process ID 8 attempting to unlock unowned resource KEY:
7:1402200252:6 (f80117756d42).
I am running across this error message: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Has anyone seen this before? Can you perform a fetch or do a loop? I am kind of new at sql and not really sure how either of these work or how to start to code something like that.
Thanks!
Terry
When I ran below stored procedure, I got error message.
create procedure pro_log
as
declare@Execution_String varchar(255),
@logfilevarchar(112)
select@logfile = 'server_name(F:)folder_namelog_name'+convert(varc har(8),getdate(),112)+'.log'
Select @Execution_String = '(F):Mssql7Binnisql -S server_name -U user_name -P password -d datebase_name -q"procedure_name" > ' + @logfile
Print @Execution_String
Execute master..xp_cmdshell @Execution_String
return
GO
exec pro_log
************************************************** *************************
Mssql7Binnisql was unexpected at this time.
(1 row(s) affected)
************************************************** *************************
Any body can please tell me what is meant by above error message?
I am running a program on SQL 6.5 server and I am getting this error message:
Can't allocate space for object '-451' in database 'tempdb' because the 'system' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment. Sort failed: Out of space or locks in database 'tempdb'
Can somebody help me resolve this error message? Thanks a lot
Isabel
hi,
i am getting the following error message whenever i run my sql server. the error message is
================================================== ========
The ODBC resource DLL(c:WINNTsystem32odbcint.dll) is a different
version than the ODBC driver manager (C:winntsystem32ODBC32.dll)
You need to reinstall the ODBC components to ensure proper operation.
================================================== ===========
i also get the foll message while starting the windows also
================================================== ==========
msdtc.exe entry level not found
================================================== ==========
can anyone tell me what should i do to rectify this problem
regards
prady
Hi All,
Can anyone tell me what this error means..
Error: 0, Severity: 20, State: 0
Stored function 'xp_sqlmaint' in the library 'xpstar.dll' generated an
access violation. SQL Server is terminating process 10.
Thanks,
Venu