Error Message When Creating Replication With Generated SQL Scripts
Dec 5, 2006
Hi all SQL Replication experts :)
I have created my production server as a distributor and a publication on that server. On my backup server I have created a pull subscription. After that I have generated SQL scripts on my backup server so I can create the pull subscription anytime.
To test my script I used sp_removedbreplication 'dbname' to remove replication on the backup server. I then used the generated SQL script to create the pull subscription again. I got this error message
Job 'ProdServName_DBName-BackServName-DBName401A48AE-D8DC-4F29-A610-13916370CD0B' started successfully.
Server: Msg 208, Level 16, State 1, Procedure sp_addsubscription, Line 135
Invalid object name 'syspublications'.
What does this Error message mean and what can I do about it?
Grateful for all answers
Best,
/M
View 1 Replies
ADVERTISEMENT
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
Mar 23, 2014
Msg 1776, Level 16, State 0, Line 1
There are no primary or candidate keys in the referenced table 'Donation' that match the referencing column list in the foreign key 'fk_Branch_bloodType'.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors. The table name affected is Purchase ,below are the tables the table Donation is created but purchase can't
create table Donation
(
Donation_Code varchar (5) primary key,
Blood_Type varchar (4) not null,
Date_Recd date not null,
Date_Of_Expiry date not null,
Purpose varchar (30),
[code]....
View 1 Replies
View Related
Jan 25, 2005
Hi
I created database using SQL server and runs under Cassini. The creation of database is ok but I have a problem when I am creating the table in database. Whenever I execute the code to create the tables, it shows the error message like 'Server not found' or just hang there. Does anybody know why it hang while I am creating the table? Is it because of the code or it's the time out error. Pls help as I am very new to this area.
MZ
View 1 Replies
View Related
Jan 10, 2008
I'm creating a simple stored procedure:
create procedure spzipcode
(
@TableName nvarchar(10)
)
as
select distinct customer_code
from @TableName
GO
When running the code above, I get the following error message:
Server: Msg 137, Level 15, State 2, Procedure spzipcode, Line 8
Must declare the variable '@TableName'.
I can't figure out what I'm doing wrong.
Does anyone have an answer:
View 6 Replies
View Related
Nov 24, 2007
I copied my .mdf database from a file and pasted it into the visual studio project App_Data folder.I can see the tables and the columns etc when creating my TableAdapter, and create my sql query etc, but then when I hit the finish button, I get this error "an Unexpected Error has OccuredError Message: Access Denied". Anyone know why I can't create my TableAdapter?
View 7 Replies
View Related
Nov 16, 2015
I have SQL Server 2008 Standard and whenever I right click on Maintenance Plans and select New Maintenance Plan and I name the plan and click Ok. I get an error message that says Key cannot be null. Parameter name: key (mscorlib)
When I press OK on this message, I see an error message that says Microsoft SQL Server Management Studio is unable to load this document: Could not load type "Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSPackageSigning 100'from assembly 'Microsoft.SqlServer.DTSRuntimeWrap.
Version=10.0.0.0. Culture=neutral. PublicKeyToken=89845dcd8080cc91'.
What does this mean? What do I need to do to fix this?
View 5 Replies
View Related
May 5, 1999
I have a SQL server scheduled to replication. This works fine if it has to do that one the sever on the same mechine. If it has to be done to another server, the replication fails with the following error message.
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Connectionopen(Createfile())
Does any one know how to fix this.
Any help will be appreciated.
Thank you.
View 1 Replies
View Related
Oct 22, 2007
Hi, everyone,
I have problems to setup peer-to-peer replication. After I setup, I have an error message as below.
Violation of PRIMARY KEY constraint 'XPKSYS_SRTY_ADT'. Cannot insert duplicate key in object 'dbo.SYS_SRTY_ADT'. (Source: MSSQLServer, Error number: 2627)
Event ID 14151 in vent viewer.
Does anyone have a solution to resolve the problem?
Thanks a lot.
View 3 Replies
View Related
Nov 20, 2006
Hello,
I got my sample application to work that I am building my proof of concept out of. I need to be able to auto generate a reply message that would normally be in the run routine. The only way I see to do this is pull it from a table but I do not want to do that. I have tried tests where I change the code to see if I can send a message back but I have to reinstall the assembly into the database which is not what I am looking for. I am looking for a way to change the message by either accessing the GUI and getting the string, calling another function to do this, or something like that. I want it so I can change the code in the run routine in VS 2005 but this does not work. I am sure their is a trick to do this but am not sure what that trick is. What is a good way to do this other than accessing a table in the database?
Thanks,
Scott Allison...
View 5 Replies
View Related
Mar 27, 2007
Hello,
We are consistently getting the error message below on our subscribers that have blob images. Is there a way to increase a setting to avoid SQL to throw this error, or another suggestion? Thanks in advance.
John
Error messages:
The replication agent has not logged a progress message in 10 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor are still active.
18 -BcpBatchSize 100000
18 -ChangesPerHistory 100
18 -DestThreads 2
18 -DownloadGenerationsPerBatch 5
18 -DownloadReadChangesPerBatch 100
18 -DownloadWriteChangesPerBatch 100
18 -FastRowCount 1
18 -HistoryVerboseLevel 3
18 -KeepAliveMessageInterval 300
18 -LoginTimeout 15
18 -MaxBcpThreads 2
18 -MaxDownloadChanges 0
18 -MaxUploadChanges 0
18 -MetadataRetentionCleanup 1
18 -NumDeadlockRetries 5
18 -PollingInterval 60
18 -QueryTimeout 400
18 -SrcThreads 2
18 -StartQueueTimeout 0
18 -UploadGenerationsPerBatch 3
18 -UploadReadChangesPerBatch 100
18 -UploadWriteChangesPerBatch 100
18 -Validate 0
18 -ValidateInterval 60
Due to the memory leak issue with respect to replicating blobbed images we have changed UploadGenerationsPerBatch to = 3.
View 13 Replies
View Related
May 22, 2006
Hi all,
I got an error message 156, when I executed the following code:
////--SQLQueryParent&Child.sql---////////
Use newDB
GO
----Creating dbo.Person as a Parent Table----
CREATE TABLE dbo.Person
(PersonID int PRIMARY KEY NOT NULL,
FirstName varchar(25) NOT NULL,
LastName varchar(25) NOT NULL,
City varchar(25) NOT NULL,
State varchar(25) NOT NULL,
Phone varchar(25) NOT NULL)
INSERT dbo.Person (PersonID, FirstName, LastName, City, State, Phone)
SELECT 1, "George", "Washington", "Washington", "DC", "1-000-1234567"
UNION ALL
SELECT 2, "Abe", "Lincoln", "Chicago", "IL", "1-111-2223333"
UNION ALL
SELECT 3, "Thomas", "Jefferson", "Charlottesville", "VA", "1-222-4445555"
GO
----Creating dbo.Book as a Child table----
CREATE TABLE dbo.Book
(BookID int PRIMARY KEY NOT NULL,
BookTitle varchar(25) NOT NULL,
AuthorID int FOREIGN KEY NOT NULL)
INSERT dbo.Book (BookID, BookTitle, AuthorID)
SELECT 1, "How to Chop a Cherry Tree", 1
UNION ALL
SELECT 2, "Valley Forge Snow Angels", 1
UNION ALL
SELECT 3, "Marsha and ME", 1
UNION ALL
SELECT 4, "Summer Job Surveying Viginia", 1
UNION ALL
SELECT 5, "Log Chopping in Illinois", 2
UNION ALL
SELECT 6, "Registry of Visitors to the White House", 2
UNION ALL
SELECT 7, "My Favorite Inventions", 3
UNION ALL
SELECT 8, "More Favorite Inventions", 3
UNION ALL
SELECT 9, "Inventions for Which the World is Not Ready", 3
UNION ALL
SELECT 10, "The Path to the White House", 2
UNION ALL
SELECT 11, "Why I Do not Believe in Polls", 2
UNION ALL
SELECT 12, "Doing the Right Thing is Hard", 2
GO
---Try to obtain the LEFT OUTER JOIN Results for the Parent-Child Table
SELECT * FROM Person AS I LEFT OUTER JOIN Book ON I.ID=P.ID
GO
////---Results---//////
Msg 156, Level 15, State 1, Line 5
Incorrect syntax near the keyword 'NOT'.
////////////////////////////////////////////////////
(1) Where did I do wrong and cause the Error Message 156?
(2) I try to get a Parent-Child table by using the LEFT OUTER JOIN via the following code statement:
Msg 156, Level 15, State 1, Line 5
Incorrect syntax near the keyword 'NOT'.
Can I get a Parent-Child table after the error 156 is resolved?
Please help and advise.
Thanks,
Scott Chang
View 9 Replies
View Related
Apr 28, 2008
Im making a records management type deal where the ID field for a record is what the user is going to be using to identify it.
My question is when the user goes to create a new record what would be the best way to handle generating the ID and showing them the ID, while still being able to scrap the record if they cancel.
Would generating the ID field, creating a new record in the database, giving the user the ID, and then update the record when they finish creating the rest of the fields be the best option. Then I can detect page redirects and stuff so that I can cancel the record if they havent saved. Otherwise Im assuming that I would have to have it so that they can find records with no information and delete them.
Or is there a way that a procedure or SQL server could reserve an ID number for a specific amount of time and release it if the user doesnt finish creating the record?
View 3 Replies
View Related
Jan 5, 2006
When editing the data driven subscription query I SOMETIMES get the following error: The dataset cannot be generated. An error occurred while connecting to a data
source, or the query is not valid for the data source. (rsCannotPrepareQuery) Invalid object name '##XX'. The datasource is ok, authentication also, the query works... Why can't it see the temporary table?
View 6 Replies
View Related
Jun 13, 2001
Hi.
Is there a way to supress a system generated error messages?
I have a stored procedure that I'm executing from Query Analyzer that updates a table and potentially generates a foreign key violation. I am trapping and handling the error, but the system generated message still displays. Is there a way to supress these messages (other than pre-checking for the condition prior to updating)?
Thanks,
Glen Smith
View 1 Replies
View Related
Jun 22, 2007
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
View 5 Replies
View Related
May 20, 2013
I'm having the same issue in VS2012. When I edit an MDX script the error window pops open between each keystroke. I have to copy the script into notepad, edit, then return it to the MDX editor.
View 9 Replies
View Related
May 23, 2008
Hello
I tried the Beta 1 of the service pack 1 to .net 3.5. If I try to add an entity (and try to save this), I get the Exception "No support for server-generated keys and server-generated values".
How can I add entities to my Sqlce- database?
I tried to give the id- column (primary key) in the database an identity, another time without identity, only primary key --> none of them worked. I always get the same error.
What do I have to change to make successfully a SaveChanges()?
Thanks for your help,
Gerald
View 21 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Apr 27, 2004
hi all ,
i have larg table (images) and i want to replicate it to two locations by the merge replication . in the first location , i was appling the merge replication for 10 months without problems. but at last week ,aftre reinilizing the publication( after generating the snapshot successfully) , i stoped the synchronization for some problems in the network line and increased the minimum and the maximum retention periods .now , when i am going to start synchronizing i receive this message
:"the merge process could not perform retention-based meta data cleanup in database "
and the number of rows between tow locations for this table are different .
please help me quickly before to be the difference in number of rows is too large and i can't to stop the system for the long period.
note : i have other publications that is replicated by transactional replication.
View 4 Replies
View Related
Oct 18, 2007
Hi Guys,
I've got a merge replication set up between boxes. They're on separate sites both behind an ADSL Nat modem router. The publisher connects to the subscriber via a port forward / Nat translation at the router. This replication set up has been running for some months now. This morning I got this failure message from the merge agent on the publisher.
"the specified remote server name may not be the network name of the remote server or the remote server is unreachable due to network problems. The step failed"
Currently the Enterprise Mgr at the publisher can see the subscriber as can query analyzer running on the publisher.
The host name of the subscriber is the same name used in the server registration at the publisher. The registration uses a Client Network Utility alias to resolve the name.
If I run a ping command at the publisher using the subscribers name I get replies (the resolution of that name is done via a hosts file entry)
Both machines are Win2k Server boxes running SQL Server 2000 Standard.
Any ideas why the agent can't see the subscriber despite the fact its usual communications channel is working just fine?
View 1 Replies
View Related
Feb 17, 2007
I'm getting the error message below when trying to synchronise a sql compact database to a sql server 2005 db. Can anyone suggest a reason for this?
RDA works fine, permissions look ok. I've run process monitor and can see the IN/OUT files being created, no ACCESS DENIED messages etc. help!
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
Initializing SQL Server Reconciler has failed. Try again.
HRESULT 0x80045901 (29045)
The merge process could not initialize the message file from Subscriber 'D:InetpubwwwrootSync30.59FA6BD9893A_9BFA53BB-1D7C-4E84-967A-799C6FEBFCE3.IN:D:InetpubwwwrootSync30.59FA6BD9893A_9BFA53BB-1D7C-4E84-967A-799C6FEBFCE3.OUT'.
HRESULT 0x80045901 (0)
The operation could not be completed.
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
View 10 Replies
View Related
Jan 22, 2007
Hi All,
I have a field 'Rowguid' of type uniqueidentifier in a table. This field is the last field in the table. In this case if I update a record through the application I don't get any error. Suppose if there are additional fields after the field Rowguid I get the error "Multiple-Step operation cannot be generated Check each status value"
For your reference I have used the following statement to add the RowGuid field
Alter table <tablename>
Add RowGuid uniqueidentifier ROWGUIDCOL NOT NULL Default (newid())
Can anyone please help me.
Thanks
Sathesh
View 3 Replies
View Related
Jul 17, 2014
Some T-SQL commands can fail with multiple errors. For example, if you try to disable a primary key constraint using ALTER TABLE t1 NOCHECK CONSTRAINT PK, you will get messages like:
Msg 11415, Level 16, State 1, Line 341
Object 'PK' cannot be disabled or enabled. This action applies only to foreign key and check constraints.
Msg 4916, Level 16, State 0, Line 341
Could not enable or disable the constraint. See previous errors.
However, in the code below, only the last message is printed. How can I print all the error messages?
USE tempdb;
CREATE TABLE #t1(c1 INT CONSTRAINT PK PRIMARY KEY);
BEGIN TRY
ALTER TABLE #t1 NOCHECK CONSTRAINT PK;
PRINT 'Primary key disabled'
END TRY
BEGIN CATCH
PRINT ERROR_MESSAGE();
END CATCH
View 4 Replies
View Related
Nov 15, 2007
Hello,
Just yesterday I implemented SqlCacheDependencies on my ASP.NET 2.0 web site for SQL Server 2005. My SQL Server 2005 database is in mode 90, mirrored with a second database server. Now I am getting Error 17310 while running very simple statements, but only on a specific table.
We have a table called "tblSchools" which, due to negligence and incompetence, has a maximum size of over 8,000. I plan on fixing that eventually, by splitting all the long varchar(2048) fields off into other tables.
I wanted to use SqlCacheDependencies on this table, for every single column. So I created a DateTime column called LastChanged and created a trigger. I am using LastChanged as a DateTime type instead of a TimeStamp/RowVersion type because I thought it would be more useful.
Here are the changes made:
---------------------------
-- Adding the column...
ALTER TABLE tblSchools
ADD
LastChanged DateTime Null
GO
-- The program uses this stored procedure to watch the "LastChanged" column.
CREATE PROCEDURE [apCacheWatchSchool]
@SchoolID int
AS
select LastChanged from dbo.tblSchools where SchoolID = @SchoolID
GO
-- Any updates on the table cause the LastChanged column to be updated with getdate()
CREATE TRIGGER [UpdateLastChanged_TS]
ON [dbo].[tblSchools]
AFTER INSERT,UPDATE
AS
BEGIN
SET NOCOUNT ON;
update [dbo].[tblSchools]
set LastChanged = getdate()
where SchoolID in (select SchoolID from inserted);
END
GO
---------------------------
After adding this column and the trigger and s-proc, any update to any row in tblSchools fails with error 17310. It CANNOT set LastChanged to anything. It has to remain NULL. I was able to perform the following operation (as long as the tblSchools.LastChanged updating trigger [UpdateLastChanged_TS] was disabled): "update tblSchools set SchoolName = 'ZZZZ' + SchoolName where SchoolID = 185" -- so, it's not some kind of row length limit. I think it's a limit on # of columns that can be dealt with. I don't really know.
I don't know where the problem is occurring. I am just telling you why. I got around the problem (temporarily) by simply having the trigger update a DateTime column in another table, and having the SqlCacheDependency watch that column in the other table. No biggie.
As for moving some of the enormous varchar columns off of tblSchools... I don't really care enough. I guess that's why it's been like this for so long.
So, my problem is fixed, I just wanted to submit this bug report so you can at least fail gracefully in the next version of SQL Server.
I have the log/txt/mdmp files available, and can provide them upon request; they're too big for this form, sorry. Please contact me at plushpuffin AT wwddfd.com if you have any questions.
View 1 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
Jan 17, 2013
I have been searching for a means to change the System Failure Error Check policy that comes as part of the Best Practice policies. I want to look back 24 hours. The WQL query shipped with the policy doesn't have a WHERE clause component that looks at TimeGenerated. That query looks like:
IsNull(ExecuteWql('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System"'), 0)
After searching for an example of how to do this and not finding any that are specific to PBM, I decided to fall back to a very basic approach - use wbemtest.exe to try out where clause additions and see how they work, then plug the result into the policy and see if it works. As a start, I tried the following query using wbemtest.exe:
select Event Code
from Win32_NTLogEvent
where EventCode = 6008
and Logfile = 'System'
and TimeGenerated > '20130101010000.000000–000'
This works great in wbemtest.exe. My next step was to plug this into the policy condition expression as follows: IsNull(ExecuteWql ('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System" and TimeGenerated > "20130101010000.000000–000"'), 0)
When I try to manually evaluate this policy in SSMS, I receive an "Invalid Query" error message.I assume that SWbemDateTime isn't available to use inside Policy Based Management policies. All the examples of how to handle the kind of dynamic date creation I have seen are for use in PowerShell, VBScript, or SSIS. I've played with using DateDiff, DateAdd, and GetDate inside the query string, with no success.
Why does the ExecuteWql above fail?Is it at all possible to dynamically generate a datetime (say, 24 hours ago) as part of the query string parameter of the ExecuteWql call?What might that look like?
View 2 Replies
View Related
Mar 9, 2007
Hello,
i use a transactional replication to load my datawarehouse DB everynight.
This works fine for the first repliaction but on the second i get the error "Agent message code 21074 the subscriptions need to be reinitialized..." and i have to reinitialize with new snapshots.
I can't see why this happen.
Somebody got an idee ?
Thanks for your help and best regards
View 1 Replies
View Related
Jan 8, 2007
I am very new to the whole sql replication, i am trying to replicate with 2x 2000sql std machines
One is to be the distrubuter and the publisher (merge type by the way) the other to be the subscriber.
I have downloaded and followed step by steps religiously however i have nothing but isses with this. I have used the wizards i am getting various errors.
the merge client comes up with an error after looking in the event view i find i have the following error
Event Type: Information
Event Source: SQLSERVERAGENT
Event Category: Job Engine
Event ID: 203
Date: 8/01/2007
Time: 12:52:17 PM
User: N/A
Computer: FAILOVERSQL2000
Description:
SubSystem Message - Job 'FAILOVERSQL2000-PTO-PTO-ELCOM-TEST-1' (0x96AD1DBC3E5A9541A6C72C4CCFBF5AED), step 2 - The schema script '\FAILOVERSQL2000ReplDatauncFAILOVERSQL2000_PTO_PTO0108120754forums_AddUserToRole_5110.sch' could not be propagated to the subscriber.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What can i do to get this fixed?
Thanks
View 1 Replies
View Related
Jan 31, 2007
Hi,
I am using ATL COM library application. It is using sql data base for fetching the records. Some times, i get the following error. could you please let me know, why this happens? This is not reproduceble every time.
(Error! hr=80040e21, hrDesc=Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work
Here is the code to connect to database which i am using.
CDataSource db;
CDBPropSet dbinit(DBPROPSET_DBINIT);
dbinit.AddProperty(DBPROP_AUTH_INTEGRATED, OLESTR("SSPI"));
dbinit.AddProperty(DBPROP_INIT_CATALOG, (const char *)bDatabase);
dbinit.AddProperty(DBPROP_INIT_DATASOURCE, (const char *)bServer);
dbinit.AddProperty(DBPROP_INIT_LCID, (long)1033);
dbinit.AddProperty(DBPROP_INIT_PROMPT, (short)4);
dbinit.AddProperty(DBPROP_INIT_TIMEOUT, (short)150);
hr = db.Open(_T("SQLOLEDB.1"), &dbinit);
if (FatalError(hr, "db.Open", buf))
{
*iErrorCode = hr;
return S_OK;
}
Any help, appreciated.
Thanks,
Satish
View 1 Replies
View Related
Aug 13, 2015
I'm new to replication and set up a Snapshot Replication on the tables in my sample database. Everything seemed to work (database created on Subscriber instance, jobs set up, etc) but the articles (tables) are not being created in the subscriber's database.
I can see the files created in the folder but I don't see the tables or the data. Also, I confirmed that the articles are checked so they should be included.
View 6 Replies
View Related
