Error Messages Of Return Codes Of SQL Installer

Dec 13, 2006

Hi all,

I have one application through which i m installing SQL Server 2005 Express Edition.

If some failure occures, all I get is one exitCode which is a return code of SQL Express installer. Is there any way by which I can find out the exact reason of failure.

One example is error code 28062.

This error code is for "sql is unable to install on compressed folder / drive".



Please help



Thanks and regards,

-Anup

View 1 Replies


ADVERTISEMENT

Execute Process Task - Error/Return Code Listing With Descriptive Messages?

May 28, 2008



I'm having a hard time locating a listing of potential error codes and the meanings for the Execute Process Task component...can someone assist?

Thanks

View 1 Replies View Related

Inconsistent Return Codes Using BCP

Mar 2, 1999

I apologize for the length of this message, but I think I need to include all this info so that the problem is understood. I am having what appears to be a problem capturing the return code from a failed BCP.


I create a stored proc to use BCP to load a table:

create procedure sp_bcp_load as
declare @RC int
execute @RC = master..xp_cmdshell "bcp JON..W4KPV in e:inetpubftprootfinreslaw4kpv.g4000.data /Sdbmtss1 /m 0 /f d:mssqluserdatafinresW4KPV.fmt /Usa /P /e d:mssqluserdatafinrescp1.err /t""|"" /r "

select 'Return code from bcp = ', @RC
if @RC <> 0
BEGIN
print 'BCP Error.'
return (8)
END
GO



If I execute the SP, and encounter a transaction log full error, the return code is still zero:


1000 rows sent to SQL Server. 45000 total
1000 rows sent to SQL Server. 46000 total
Msg 1105, Level 17, State 2:
Server 'DBMTSS1', Line 1:

Can't allocate space for object 'Syslogs' in database 'Jon' because
the 'logsegment' segment is full. If you ran out of space in Syslogs,
dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.

(54 row(s) affected)

----------------------- -----------
Return code from bcp = 0




If I execute the SP again, it correctly returns a non-zero value:


Msg 1105, Level 17, State 2:
Server 'DBMTSS1', Line 1:
Can't allocate space for object 'Syslogs' in database 'Jon' because
the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.

(6 row(s) affected)

----------------------- -----------
Return code from bcp = 1

(1 row(s) affected)

BCP Error.



Does anybody have an idea why this behaves this way? Any suggestions on how to trap an error on the first call?

Thanks,
Jon Carter

View 2 Replies View Related

Question On Return Codes And Rollback For Stored Procedures.

Oct 19, 2001

I need to execute 10 stored procedures one after the other in a sequence,but need to roll back if any one of them fails and discontinue further execution.Example: if sp#3 fails it should roll back alll the changes made by sp# 1 and sp# 2 and also should not continue executing the rest of them. Any ideas?
Thanks.

View 1 Replies View Related

SQL Server 2012 :: Return Descriptions From Table2 In Same Format As Codes From Table1?

Apr 22, 2015

Table1 contains a CODES column which may store multiple codes separated by commas.

The descriptions for these codes are stored individually in a column in in Table2.

I would like to return the descriptions from Table2 in the same format as the codes from Table1.

Table1 Stores multiple codes per ID in a single column.

ID CODES
-- --------------
01 Code1,Code2,Code3

Table2 Stores the definitions for the codes in Table1

CODE DESCRIPTION
----- ---------------
Code1 Description1
Code2 Description2
Code3 Description3

The tables are what the tables are. Here is what I am trying to accomplish:

ID CODES DESCRIPTIONS
-- ----------------- --------------------------------------
01 Code1,etc Description1,Description2,Description3

I've found two different queries which return each code and associated description by ID in separate rows. Perhaps the next step is to aggregate from this?

View 7 Replies View Related

Not Able To Receive Return Messages From Far End...

Apr 27, 2007

Dear all,



I have set up service broker to work between two instances of SQL server with Dialog Security (implemented using certificates). The initiator queue has a activation procedure attached to process the return messages.



I'm receiving the messages from inside a SSIS package using Receive statement. Once I recive the message, I store the conversation handle, message type and message body in variables and execute the remaining ETL package based on the input.



Towards the end of the package, I send a message back to the Initiator for the same conversation to indicate sucess or failure.




Code Snippet

declare @conversation_handle UNIQUEIDENTIFIER

select @conversation_handle = <<SSIS User Variable>>;

SEND ON CONVERSATION @conversation_handle MESSAGE TYPE [/OLAP/Error] (N'<Error>My custom error</Error>');

END CONVERSATION @conversation_handle ;



The problem now is that, the initiator queue receives only the "http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog" message. I would expect it to recieve "/OLAP/Error" first and then the "EndDialog" message.



Any idea on what's happening here? Any help is appreciated.



Cheers,

Arun

View 5 Replies View Related

Keeping DTS Return Messages In A Log Table

Jul 2, 2001

Hi, I am trying to find a way to capture all the status (Start time, execution time, Status messages etc) from executing a DTS package in to a table I will create in a database, does anyone know, where those information being kept?
When I excute the DTS package manually, a window will come up and show the status of each step within the DTS package. I am hoping to capture these information and load it to my log table.

Thanks in advance.

View 1 Replies View Related

SQL Server 2012 :: Return Multiple Messages To Client Application?

Jun 9, 2014

I have a procedure where after processing, i am required to send multiple message to calling application.

For ex:

create procedure test as
(@a as int,
@b as int
@c as int )
/*
some transformations */
print 'variable a is' + @a;
print 'variable b is' + @b;
print 'variable c is' + @c;

I am only providing a sample of return messages, but in reality there a lot more messages where a string and a parameter value need to concatenated.Unfortunately print is not allowing to concatenate parameter value.I can use RaiseError, but these messages are not really any error messages.

i tried to concatenate all message and output it using OUT type parameter, but the length of all messages combined exceeds 10000 characters.

Is there any other alternate to send these messages out to application?

View 1 Replies View Related

Error Msg:SQLServer2005_SSMSEE.msi Is Not A Valid Installer Package

Apr 9, 2007

I have downloaded the msi file for the SQL Server Management Studio Express. However, clicking the msi file, showed a Windows Installer error msg that the installer package can not be opened because it is not a valid installer pckage.



Previously, I did download and install the SQL Server 2005 Express successfully. We need Management Studio Express in order to run the 'Enterprise manager'. Am I right?



TIA,

Jeffrey

View 1 Replies View Related

ADO Error Codes...

Oct 10, 2006

Hi,

I have another question about ADO (using C++). I have searched the MSDN but I haven't found a answer to my question (maybe I'm just too stupid)... If I make a connection to my SQL Server there may occur some errors, but how to find out what went wrong ?

In terms of code I have e.g. something like that:
try { connection->Open(ConnectionString,Username,Password,ADODB::adConnectUnspecified);
...} catch (_com_error& e) { long numErrors = connection->Errors->Count; for (long i=0; i<numErrors; i++) { ADODB::ErrorPtr pErr = connection->Errors->GetItem(i); ..... }}

Now I could get the error number by pErr->GetNumber().
But with which symbolic constant has this to be compared to find out which error occured ?? I didn't find any...Or is there another better way to do this ?

P.S. I am using SQL Server 2005 Express

View 7 Replies View Related

Error Codes?

Jun 28, 2007

My data flow component is throwing an error and the only help I get is the following:



error code: -1071607694

error column: 257



What in the world does this mean? Can it get more cryptic than this?



View 1 Replies View Related

Not Allowing Setup. Getting Error Trying To Run Windows Cleanup Installer

Feb 4, 2008



I cannot go backward or forward on installing SQL Server 2005. Do not have programs installed, but setup disk claims it is already installed.
Tried running Windows installer CleanUp and got the following error message when trying to install
Run Time error -2147024882
System Error &H80004005

Thanks!
Terry

View 1 Replies View Related

Setup.exe Error Codes Not In BOL

May 11, 2006

Using the following syntax, sometimes non-zero error codes are returned:
D:SQL Server x86Servers>start /wait setup
D:SQL Server x86Servers>echo %errorlevel%
3010

Searching BOL for 3010 returns nothing.

Other error codes that were seen are 1603 and 9009.

What do these error codes mean? Is there a place where they can be looked up?

View 4 Replies View Related

SSIS Map Error Codes

Oct 3, 2007

I am designing a SSIS package where i get text file as input. This file contains transaction details.

I have to map the members in each transaction for data integrity. For this i am using Lookup object.

Lookup object works very well upto my expectations but i am facing problem in mapping the error code sent bythe this object whenever a record fails. I am storing all the invalid records into text file.

All the records get stored into text file along with some SQL Server error_code and error_column.
I cant interpret these last two columns as it displays some numeric code and column name.

Is there any way to map these error codes and columns and get relevant information out of it?
Example
error code = -1071607778
error column = 0

Any help is appreciated.

View 1 Replies View Related

Error Codes And How To Trap Certain Ones

Apr 10, 2006

I have a system using asp pages & ADO & SQL Server 2000, which processes files, builds a SQL insert statement from the file content and then executes it.

If the insert SQL fails, I need to know whether there was something wrong with the insert SQL, or something wrong with the database (e.g. SQL Server times out), and handle those differently,

Questions
=======
1. Is there an easy way to do this without checking against a list of error codes?
2. Can anyone point me to a list of errorcodes? Can't find this anywhere

thank you

View 6 Replies View Related

Complete List Of Error Codes

May 12, 2006

Does anyone know where to obtain a complete list of error codes which can occur in SQL Server ? For example : errror number 547 is a foreign key violation - where can I get a complete list of these numbers and there descritions ?

I can't find it in BOL or anywhere

View 1 Replies View Related

Xp_sendmail, ODBC Error Codes. Thanks For The Previous Help.

Jul 2, 2002

Send Mail works fine when I just want to send a message. However, when I try to send the results from a query as an attachment, I get a ODBC error. Here is example of the code and the error code that I recieve.

Use MyDatabase
go
exec master.dbo.xp_sendmail 'Doe,John',
@query = 'Select * from tblMyTable',
@subject = 'SQL Server Report',
@message = 'The contents of the tblMyTable:',
@attach_results = 'TRUE', @width = 250
go

---------------------------------------------------

Error: ODBC error 208 (42S02) Invalid object name 'tblMYTABLE'.

Can someone tell me what am I doing wrong?

View 1 Replies View Related

Theres A Syntax Error When I Click On Login Button After Writng The Codes

Feb 1, 2008

 the line in bold..can sumone tell me how to correct the error , it say syntax error beside "="
Imports System.Data
Imports System.Data.SqlClient

Partial Class Default3
    Inherits System.Web.UI.Page

    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

    End Sub

    Protected Sub btnlogin_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnlogin.Click
        Dim conn As New SqlConnection _
                      
("data source =YOUR-KEGKZI6IFCSQLEXPRESS; integrated security=true;"
& _
                      
"initial catalog=LOGINPAGE")
        conn.Open()

        Dim cmdLogin As New
SqlCommand("select * from UserName where ='" & txtusername.Text
& "' and Password='" & txtpassword.Text & "'", conn)
        Dim dr As SqlDataReader
        dr =cmdLogin.ExecuteReader()


        If dr.Read() Then

            Response.Redirect("Galery.aspx")
        Else
            Response.Redirect("homepage.aspx")

        End If

View 1 Replies View Related

2 SQL CE Native Error Codes (28037 And 28600) Freezing Up My Windows CE .Net Application???

Jan 8, 2008

I am running a .Net application (VB.Net, .Net Framework 2.0) on a Windows CE 5.0 handheld device. I am relatively having good success with SQL CE replication, however sometimes (2 users out of 30 every 2 weeks), are freezing up in the application.

Here is what CE SQl software versions I installed:
sqlce30.dev.ENU.wce5.armv4i.CAB
sqlce30.repl.wce5.armv4i.CAB
sqlce30.wce5.armv4i.CAB

I have a trace log in my application, and here is what pops up before the hang (warm rebooting the handheld works)


NativeError: 28037
SQL Msg: A request to send data to the computer running IIS has failed. For more information, see HRESULT.

NativeError: 28600
SQL Msg: The database is currently synchronizing with the server.


I am using a Thread to syncronize (microsofts built in class), as you can see I am well aware of 28600, it just means some other thread is already syncing, so I can wait until next time to syncronize. However, my users apps are freezing just after both error codes occur. Anything in the code below causing issues??? (maybe _repl.Dispose() is freezing up my handheld, because its freezing after this line of code (see below code):

"MTM.SPUD.Utilities.Utilities.Log("[DEBUGQLThread#" + threadId + "]: End of Thread Life.")"


Public Sub AsyncSyncronize(ByRef PendingData As Boolean, ByVal Publication As String, ByVal Subscription As String, ByRef LastSyncDateTime As DateTime)
Dim _repl As New SqlCeReplication()
Try
...
savedAsyncResult = _repl.BeginSynchronize(objDelegate1, objDelegate2, objDelegate3, objDelegate4, _repl)
Catch ex As Exception
Finally
End Try

End Sub

Public Sub OnSynchronizeComplete(ByVal asyncResult As IAsyncResult)
Dim _repl As SqlCeReplication = Nothing
Dim threadId As String = ""
Try
_repl = DirectCast(asyncResult.AsyncState, SqlCeReplication)
threadId = _repl.InternetPassword
_repl.EndSynchronize(asyncResult)
dataIsPending = False

Catch exce As SqlCeException
_repl.CancelSynchronize()
MTM.SPUD.Utilities.Utilities.Log("[DEBUGQLThread#" + threadId + "]: SQLCE OnSynchronizeComplete() NativeError: " + exce.NativeError.ToString + "SQL Msg: " + exce.Message.ToString)

dataIsPending = True
If exce.NativeError.ToString = "28600" Then
MTM.SPUD.Utilities.Utilities.Log("[WARNINGQLThread#" + threadId + "]: Will try again next time")
Return
End If

Catch ex As Exception
Return
'MTM.SPUD.Utilities.Utilities.Log("App Exception: " + ex.Message)
'Throw New Exception("EndSynchronize Failed: " + ex.Message)

Finally
MTM.SPUD.Utilities.Utilities.Log("[DEBUGQLThread#" + threadId + "]: End of Thread Life.")
If _repl IsNot Nothing Then
_repl.Dispose()
_repl = Nothing
End If
End Try
End Sub

View 3 Replies View Related

Urgent : DB-Library Error 10007: General SQL Server Error: Check Messages From The SQL

Jul 20, 2005

DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh

View 1 Replies View Related

Return Error Code (return Value) From A Stored Procedure Using A Sql Task

Feb 12, 2008


I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.

I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.

I have two parameters mapped:

tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1

I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.

The first part of the sp is below and I set the value @i and return.


CREATE procedure [dbo].[Marketing_extract_history_load_TEST]

@table_name varchar(200),

@i int output

as

Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.

View 2 Replies View Related

No Help From The Error Messages

Dec 4, 2007

I am writing a tracking system. There is a table in the Sql Server 2000 database that contains a column for the user's ntid, the page they visited, the date of the last visit, a column each to track hits for the current year and a previous year column (basically for archiveing and reporting purposes), and 12 columns for hits per month (obviously, one per column). To record a hit, my unit determined we would only track one hit per day, so basically, there are 3 possible outcomes I needed to account for :
1) A user had never hit the page before, so I need to record the user's ID, the page they hit for the first time (since it won't exist yet), increment the year counter for that user on that page, and then determine what month column counter should be incremented as well.
2) A user had hit the page before, but not on this same day, so I need to update the row for that user on that page, changing the last visit field to reflect the current date, and icnrementing the appropriate counters.
3) A user had hit the page already on the same day, so basically, nothing should be changed whatsoever. No action should be taken.
I wrote a stored procedure to attempt to accomplish that logic, and though it's probably not very pretty, I was surprised at how few errors I got on my first Syntax check. Here's the stored procedure :
CREATE PROCEDURE sp_hitMe@ntid varchar(10),@page varchar(50),@thisHit datetimeASSET NOCOUNT ON
DECLARE @tempDate datetimeDECLARE @yearCount intDECLARE @monthCount intDECLARE @inMonth varchar(20)DECLARE @monthColumn varchar(10)SET @inMonth = DATENAME(mm, @thisHit)SET @monthColumn =  CASE   WHEN @inMonth = 'January' THEN 'hitsInJan'  WHEN @inMonth = 'February' THEN 'hitsInFeb'  WHEN @inMonth = 'March' THEN 'hitsInMar'  WHEN @inMonth = 'April' THEN 'hitsInApr'  WHEN @inMonth = 'May' THEN 'hitsInMay'  WHEN @inMonth = 'June' THEN 'hitsInJun'  WHEN @inMonth = 'July' THEN 'hitsInJul'  WHEN @inMonth = 'August' THEN 'hitsInAug'  WHEN @inMonth = 'September' THEN 'hitsInSep'  WHEN @inMonth = 'October' THEN 'hitsInOct'  WHEN @inMonth = 'November' THEN 'hitsInNov'  WHEN @inMonth = 'December' THEN 'hitsInDec'  END DECLARE @insString varchar(500)DECLARE @updString varchar(500)SET @insString = 'INSERT INTO tblTracking (ntid, page, lastVisit, hitsThisYear, ' + @monthColumn + ') VALUES (' + @ntid + ', ' + @page + ', ' + @thisHit + ', 1, 1)'
if exists(select * from tblTracking where ntid = @ntid and @page = page) begin  if exists(select * from tblTracking where lastVisit = @thisHit)   begin    -- DO NOTHING!   end  else   begin    DECLARE @theColumn varchar (100)    SET @theColumn = 'SELECT ' + @monthColumn + ' FROM tblTracking WHERE ntid = @ntid AND @page = page'    SET @yearCount = (SELECT hitsThisYear FROM tblTracking WHERE ntid = @ntid AND @page = page) + 1    SET @monthCount = (Exec @theColumn)    SET @monthCount = @monthCount + 1    SET @updString = 'UPDATE tblTracking SET lastVisit = ' + @thisHit + ', hitsThisYear = ' + @yearCount + ', ' + @monthColumn + ' = ' + @monthCount + ' WHERE ntid = @ntid AND @page = page'    Exec @updString   end endelse begin  Exec @insString endGO
And to my surprise, the only 3 errors I got were :
Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 39Incorrect syntax near the keyword 'end'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 45Incorrect syntax near the keyword 'Exec'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 50Incorrect syntax near the keyword 'end'.
However, these are of course so vague as to be useless to me. What's wrong with the procedure? What have I missed?

View 9 Replies View Related

SQL Error Messages

Mar 9, 1999

Is there a way to return the SQL Native error to a Visual Basic program?

View 3 Replies View Related

Error Messages

Mar 3, 1999

Hey everyone,

Here is what I'm doing:

exec xp_sendmail @recipients = 'ampx@hotmail.com',
@query = 'select * from information where recid <= 10',
@subject = 'Query test',
@message = 'hello',
@attach_results = 'TRUE',
@width = 250

I get this error:

Msg 2812, Level 16, State 4
Stored procedure 'xp_sendmail' not found.

Anyone know why? isn't xp_sendmail a function of SQL?

Thanks

View 1 Replies View Related

*** DTS Error Messages ***

Jul 20, 2005

Hello,I'd like to know if I use DTS. If I use it immediately, I can see the errorin the dialog box, instead, if I use it with scheduling, where Can I checkthe error ?ThanksSaimon(Florence)

View 2 Replies View Related

Looking Up Error Messages

Mar 10, 2008



Greetings
I'm learning SSIS and BIDS. I have extreme difficulty making sense of the error messages that come out.

First of all, what do the numbers mean? Each column, error, etc. is assigned a number that obviously means something yet I cannot relate them to anything. For example: The output column Name (713) on output Test (15) and Component (15) -- My table doesn't have 713 columns in it...

Then there are the error codes that obviously contain something useful. For example:

DTS Error: Microsoft.SqlServer.Dts.Runtime.TaskHost/QueueFuzzyName [33]SIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (46)" failed because error code 0xC020907D occurred, and the error row disposition on "input "OLE DB Destination Input" (46)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.


Where would I look up: DTS_E_INDUCEDTRANSFORMFAILUREONERROR and 0xC020907D? I understand that it tried to convert a value in something numbered 46 (no idea what that is) and the conversion failed. But that's it. How do I transmogrify 46 to something I can look at. I'm a little fuzzy on what a Destination Input is. Isn't an output a destination?

Or this one:

Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors"
Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.

I have absolutely no idea what this means except that many things happened, one of them failed, I have an error of some sort and it's error code is 0x80040E21. It must be important, it's in there twice, but what does it mean?

I'm thinking that in the help somewhere all these error messages are listed and I can look them up, but I can't seem to find it anywhere. Am I supposed to be converting them to decimal first?

Any advice from you experts would be much appreciated.

View 5 Replies View Related

SqlBulkCopy Error Messages

Sep 6, 2006

I'm using SqlBulkCopy.  Does anyone know how I can output what row (its column names) are throwing a duplicate primary key message when I bulkCopy.WriteToServer(datatable1)?Thanks 

View 1 Replies View Related

Dynamic SQL Error Messages!

Mar 3, 2008

Have this dynamic sql statement that I'm working on.  It works fine outside the execute (running the query by iteself) and prints fine but when I execute it, I get errors.  Spacing is good.  Here is the SQL statement.
 set @sql = 'insert into #participantInfo (strfirstname,strlastname,strindividualfk,strusername,dtelastlogin,blninactive,fk_intrightid,imgPhoto, stre_mail,strmiddleinitial,straddress1,straddress2,strcity,fk_intlocationid,strpostalcode,strhomephone,strbusinessphone,strmiscinfo1, strmiscinfo2,strsecretquestion,dteDateOfBirth,intgender,strsecretanswer)  select p.strfirstname,p.strlastname,p.strindividualfk,l.strusername,l.dtelastlogin,p.blninactive,r.fk_intrightid,p.imgPhoto, p.stre_mail,p.strmiddleinitial,p.straddress1,p.straddress2,p.strcity,p.fk_intlocationid,p.strpostalcode,p.strhomephone,p.strbusinessphone, p.strmiscinfo1,p.strmiscinfo2,l.strsecretquestion,p.dteDateOfBirth,p.intgender,l.strsecretanswer  from tblparticipants p inner join  tblparticipantrights r on p.strindividualfk = r.strindividualfk inner join  tblparticipantlogin l on p.strindividualfk = l.strindividualfk  where p.fk_strsubgroupid = ''' +  @strsubgroupid + ''''
exec (@sql)
Error messages are:
Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipants'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantrights'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantlogin'. 
Anyone see what may be the cause?
 thanks ^_^

View 6 Replies View Related

Error Messages To A File?

Aug 23, 2001

How to write the error messages generated in a job to a file?Thanks.

View 1 Replies View Related

How To Get More Info For Error Messages

Jul 10, 2000

So far I have not been able to figure out how to get more info
regarding the sql server errors. For example, I get this error
from sql server query analyzer (this just an example):

-----------
Server: Msg 128, Level 15, State 1, Line 5
The name 'does' is not permitted in this context.
Only constants, expressions, or variables allowed here.
Column names are not permitted.
-----------


Is there a way to find more information regarding this error, or
like Oracle has MeataLink, where you can search, if someone else
already got this error and how it got resolved?

Or how you folks go about resolving errors you get? Is it based
on trail and error, or experience (like already encountered this
type before) etc.?

View 1 Replies View Related

Dbcc Error Messages

Sep 23, 1999

If you find error messages in the dbcc results, how do you find out which table it is according to the ID number 875696?

ie:

Checking 875696
The number of data pages in this table is .....

View 3 Replies View Related

SQL Server Error Messages

Jul 30, 2007

Hi All,

I was wondering if anybody knows where to get a complete list of SQL Server error messages. I am writing a stored procedure that scans SQL Server Logs for errors and if there are errors in the logs, I get paged.

Thanks.

View 2 Replies View Related

Logging Error Messages

May 7, 2002

Hi,

How can I avoid certain messages from SQL Server being recorded into the Event viewer ?
For example, every time I truncate the transaction log with 'Backup log with truncate_only', It is being recorded into the Event viewer as an Error. But, I know that it is not an error.
How can I avoid this ?

Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved