Error Messages Upsizing From MSAccess Database To SQLServer
Apr 26, 2006
I am trying to use SQLServer for the first time and I am trying to use the upsizing wizard on Access to get moved over to SQLServer. I am getting the following error messages:
I am trying to use SQLServer for the first time and I am trying to use the upsizing wizard on Access to get moved over to SQLServer. I am getting the following error messages:
Hi;I went to the microsoft site to try to find a guide to the errormessages that the jdbc drivers give ( for sqlserver 2000 ).I had no luck.Does anyone know if there is such a guide?I got this mysterious error message below in my logs ( nothing visiblein user land ).Anyone know what it means?Thanks in advanceStevejava.sql.SQLException: [Microsoft][SQLServer 2000 Driver forJDBC][SQLServer]Transaction (Process ID 151) was deadlocked on lockresources with another process and has been chosen as the deadlockvictim. Rerun the transaction.
Hello, I have a question about an error I am getting when upsizing my Access Database back end to SQL Server 7.0. My server has the following configuration:
Microsoft Windows 2000 Server, Service Pack 3 SQL Server 7.0, Service Pack 4, OLAP Services Service Pack 3 Microsoft Office 2000, Service Pack 2
When I attempt to upsize my database, the first four tables are upsized successfully, but the fifth table has the following error in a window that pops up called "Errors from Server":
SQL that Caused Error(s): UT_CopyData
Error(s): Server Error 0: Timeout Expired
The table that is having the error is very large, with 240,972 records. I have tried to perform the upsizing after cutting the size of the table down to only 20,000 records, and the error does not occur. I would like to know if there is a timeout parameter in SQL Server 7.0 that I can configure that would keep this timeout error from occuring while upsizing my database with the full table of 240,972 records. I have already tried setting "remote login timeout" = 0 and "resource timeout" = 100000, but neither of these has helped. Thank you very much for any advice you can provide me!
SELECT Hist_POS.POSITION_CLASS_CODE, First(Hist_POS.POSITION_TITLE) AS FirstOfPOSITION_TITLE INTO [Manhour Positions] FROM Hist_POS GROUP BY Hist_POS.POSITION_CLASS_CODE ORDER BY Hist_POS.POSITION_CLASS_CODE;
But not SQLServer because of First(). How can I achieve the same results in SQLServer?
Could not load file or assembly 'Microsoft.SqlServer.Express.BatchParser, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A) (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Strong name validation failed. (Exception from HRESULT: 0x8013141A)
------------------------------ BUTTONS:
OK ------------------------------
I just opened CMD. and did the following
Command Prompt
cd D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn sqlservr.exe -s
and it returned the following
Error : 17112, Severity : 16, State: 1. The error is printed in terse mode because there was error durring formatting. Tracing, ETW, Notifications etc are skipped.
I have a SQL2008 database, running Standard Edition 64-bit, database owns by sa, connected to Management Studio using Windows Authentication mode. When I tried to generate scripts from a database, I got the following error messages:-
[Operation is not valid due to the current state of the object. (SqlManagerUI)]
which happened at one particular table. I have reviewed this table definitions are normal, and I could select data from it.
I couldn't find any information anywhere relating to this error messages, except that someone got it when they were trying to change the authentication mode or sa password.
Hi I was not able to connect to SQL Server machine. On examining the Error log (which was huge 53MB), I found the following messages that filled 95% of the logfile. Is this something to do with memory allocation.
Someone, please let me know what is going on. After the server reboot everything works fine. I am worrired that this message may occur again.
Thanks Machilu
2004-11-30 20:15:03.64 logon Login failed for user 'NT AUTHORITYSYSTEM'
2004-12-01 08:15:03.77 logon Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
2004-12-01 00:47:25.28 spid70 WARNING: Failed to reserve contiguous memory of Size= 65536. 2004-12-01 00:47:25.31 spid70 Buffer Distribution: Stolen=127590 Free=4176 Procedures=182443 Inram=0 Dirty=14180 Kept=0 I/O=0, Latched=154, Other=10049 2004-12-01 00:47:25.31 spid70 Buffer Counts: Commited=338592 Target=338592 Hashed=24383 InternalReservation=357 ExternalReservation=0 Min Free=256 2004-12-01 00:47:25.31 spid70 Procedure Cache: TotalProcs=66212 TotalPages=182443 InUsePages=88547 2004-12-01 00:47:25.31 spid70 Dynamic Memory Manager: Stolen=310033 OS Reserved=38512 OS Committed=38457 OS In Use=38388 Query Plan=332158 Optimizer=0 General=15540 Utilities=8 Connection=473 2004-12-01 00:47:25.31 spid70 Global Memory Objects: Resource=10685 Locks=119 SQLCache=4540 Replication=2 LockBytes=2 ServerGlobal=45 Xact=201 2004-12-01 00:47:25.31 spid70 Query Memory Manager: Grants=0 Waiting=0 Maximum=92118 Available=92118 2004-12-01 00:50:04.10 logon Login failed for user 'NT AUTHORITYSYSTEM'. 2004-12-01 00:50:04.32 logon Login failed for user 'NT AUTHORITYSYSTEM'. 2004-12-01 00:51:08.78 spid70 WARNING: Failed to reserve contiguous memory of Size= 65536. 2004-12-01 00:51:08.82 spid70 Buffer Distribution: Stolen=138829 Free=5944 Procedures=169283 Inram=0 Dirty=14431 Kept=0 I/O=0, Latched=154, Other=9951 2004-12-01 00:51:08.82 spid70 Buffer Counts: Commited=338592 Target=338592 Hashed=24536 InternalReservation=360 ExternalReservation=0 Min Free=256 2004-12-01 00:51:08.82 spid70 Procedure Cache: TotalProcs=67783 TotalPages=169283 InUsePages=76116 2004-12-01 00:51:08.82 spid70 Dynamic Memory Manager: Stolen=308112 OS Reserved=38512 OS Committed=38457 OS In Use=38398 Query Plan=330249 Optimizer=0 General=15535 Utilities=8 Connection=476 2004-12-01 00:51:08.82 spid70 Global Memory Objects: Resource=10685 Locks=118 SQLCache=4540 Replication=2 LockBytes=2 ServerGlobal=45 Xact=202
I need to switch from MS Access to SQL Server for my database. To set up a development environment I downloaded the free Microsoft SQL Server Express (February CTP version). I installed the required .NET Framework v2, and then SQLExpress. The install was done using all the defaults, and was done successfully. I also downloaded and installed the SQL Express Manager Tool.
The SQL Server was installed on the same machine as my VS.NET development environment. The SQL Server process is now running, and I can connect to the server using the SQL Express Manager Tool. This allows me to view and query the sample databases, but not much else.
To convert my Access .MDB database to SQL Server, I am trying to use the MS Access Upsizing Wizard. The version of Access I am using is Access 2002 on a Windows XP-Professional system. The problem is that Access cannot get a connection to the SQL Server. I tried using the default server name "(local)" and "Use Trusted Connection", but I receive the following error:
Connection failed: SQLState: '01000' SQL Server Error: 2 [Microsoft][ODBC SQL Server Driver[]Shared Memory]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server Error: 17 [Microsoft][ODBC SQL Server Driver[]Shared Memory]SQL Server does not exist or access denied.
Curiously, I get this exact same error message even if the SQL service is stopped. So I'm pretty sure the problem is that it is not finding the SQL server, and not a security issue.
In order to connect to the SQL server using the SQL Server Manager Tool, you have to provide the actual instance name for the server "COMPNAMESQLExpress". So I tried using this server name in the Access Upsizing Wizard, but this returns the same error message as above except the first SQL Server Error is 53. I also tried using a Login ID and password (using the Windows administrator ID and password, and also the "sa" ID and password) to no avail.
I am at wits end, and can't figure out why Access can't find the SQL Server. Any ideas would be appreciated.
How do you free up locks when there are not enough locks available to perform a large write of records to a table from Access97. I have tried using the Access97 Upsizing wizard, appending data from Access97 to the SQL Server, and Importing from the SQL Server end.
Approx. number of records is 1 million.
Error code is 1204, "SQL Server has run out of LOCKS".
But when we increase the number of locks, we get another error message which says this is using up too much memory.
Hi I have a linked server to MSAccess DB and, when I try to select record from a table that have a column with a bad date formatted (with year less than 1753) I receive the message: .... conversion error from DBTYPE_DBTIMESTAMP to datetime....
My scope is set to NULL this bad values from Sql Server ... I first try with something like
UPDATE LNK_SVR...TABLE SET FLD=NULL WHERE ISDATE(FLD)=0
But I receive the same error... perheaps the provider generate the error before an Sql Server evaluation ...
exec LNK_SVR...sp_executesql 'update table set FLD=NULL WHERE YEAR(FLD)<1753'
But I receive the folowing message ....
Messaggio 7213, livello 16, stato 1, riga 1
Il provider non รจ riuscito a passare parametri di stored procedure remota al server remoto 'LNK_SVR. Verificare che il numero, l'ordine e il valore dei parametri passati siano corretti.
Is it possible to upsize an Access 2003 database to SQL Server Express without actually installing Access 2003 on my server....I would prefer to not have to do that. Currently, I only have the Access mdb file on the server...it is the backend to my ASP application. Can I download and run the Upsizing Wizard on it's own?
Is it possible to upsize an Access 2003 database to SQL Server Express without actually installing Access 2003 on my server....I would prefer to not have to do that. Currently, I only have the Access mdb file on the server...it is the backend to my ASP application. Can I download and run the Upsizing Wizard on it's own?
I have an Access DB with about 50 tables. When I run the upsize wizard all bur four tables import beautifully, data and all. Four of the tables fail with the message 'Table was skipped, or export failed'
When I try to IMPORT the data I get 100 or so messages like this one:
Warning 0x80047076: Data Flow Task: The output column "AssessPlanPHPID" (23) on output "OLE DB Source Output" (11) and component "Source - tblAssessPlan" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance. (SQL Server Import and Export Wizard)
And the import fails. Note that the upsize creates the tables just fine, it just won't import the data.
Is there a way to transfer data from a SqlServer db to a SqlServer Express db. I tried to use the backup file of SqlServer, but this file is not valid for SqlServer Express. Or there any alternatives?
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
I am writing a tracking system. There is a table in the Sql Server 2000 database that contains a column for the user's ntid, the page they visited, the date of the last visit, a column each to track hits for the current year and a previous year column (basically for archiveing and reporting purposes), and 12 columns for hits per month (obviously, one per column). To record a hit, my unit determined we would only track one hit per day, so basically, there are 3 possible outcomes I needed to account for : 1) A user had never hit the page before, so I need to record the user's ID, the page they hit for the first time (since it won't exist yet), increment the year counter for that user on that page, and then determine what month column counter should be incremented as well. 2) A user had hit the page before, but not on this same day, so I need to update the row for that user on that page, changing the last visit field to reflect the current date, and icnrementing the appropriate counters. 3) A user had hit the page already on the same day, so basically, nothing should be changed whatsoever. No action should be taken. I wrote a stored procedure to attempt to accomplish that logic, and though it's probably not very pretty, I was surprised at how few errors I got on my first Syntax check. Here's the stored procedure : CREATE PROCEDURE sp_hitMe@ntid varchar(10),@page varchar(50),@thisHit datetimeASSET NOCOUNT ON DECLARE @tempDate datetimeDECLARE @yearCount intDECLARE @monthCount intDECLARE @inMonth varchar(20)DECLARE @monthColumn varchar(10)SET @inMonth = DATENAME(mm, @thisHit)SET @monthColumn = CASE WHEN @inMonth = 'January' THEN 'hitsInJan' WHEN @inMonth = 'February' THEN 'hitsInFeb' WHEN @inMonth = 'March' THEN 'hitsInMar' WHEN @inMonth = 'April' THEN 'hitsInApr' WHEN @inMonth = 'May' THEN 'hitsInMay' WHEN @inMonth = 'June' THEN 'hitsInJun' WHEN @inMonth = 'July' THEN 'hitsInJul' WHEN @inMonth = 'August' THEN 'hitsInAug' WHEN @inMonth = 'September' THEN 'hitsInSep' WHEN @inMonth = 'October' THEN 'hitsInOct' WHEN @inMonth = 'November' THEN 'hitsInNov' WHEN @inMonth = 'December' THEN 'hitsInDec' END DECLARE @insString varchar(500)DECLARE @updString varchar(500)SET @insString = 'INSERT INTO tblTracking (ntid, page, lastVisit, hitsThisYear, ' + @monthColumn + ') VALUES (' + @ntid + ', ' + @page + ', ' + @thisHit + ', 1, 1)' if exists(select * from tblTracking where ntid = @ntid and @page = page) begin if exists(select * from tblTracking where lastVisit = @thisHit) begin -- DO NOTHING! end else begin DECLARE @theColumn varchar (100) SET @theColumn = 'SELECT ' + @monthColumn + ' FROM tblTracking WHERE ntid = @ntid AND @page = page' SET @yearCount = (SELECT hitsThisYear FROM tblTracking WHERE ntid = @ntid AND @page = page) + 1 SET @monthCount = (Exec @theColumn) SET @monthCount = @monthCount + 1 SET @updString = 'UPDATE tblTracking SET lastVisit = ' + @thisHit + ', hitsThisYear = ' + @yearCount + ', ' + @monthColumn + ' = ' + @monthCount + ' WHERE ntid = @ntid AND @page = page' Exec @updString end endelse begin Exec @insString endGO And to my surprise, the only 3 errors I got were : Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 39Incorrect syntax near the keyword 'end'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 45Incorrect syntax near the keyword 'Exec'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 50Incorrect syntax near the keyword 'end'. However, these are of course so vague as to be useless to me. What's wrong with the procedure? What have I missed?
Hello,I'd like to know if I use DTS. If I use it immediately, I can see the errorin the dialog box, instead, if I use it with scheduling, where Can I checkthe error ?ThanksSaimon(Florence)
Greetings I'm learning SSIS and BIDS. I have extreme difficulty making sense of the error messages that come out.
First of all, what do the numbers mean? Each column, error, etc. is assigned a number that obviously means something yet I cannot relate them to anything. For example: The output column Name (713) on output Test (15) and Component (15) -- My table doesn't have 713 columns in it...
Then there are the error codes that obviously contain something useful. For example:
DTS Error: Microsoft.SqlServer.Dts.Runtime.TaskHost/QueueFuzzyName [33]SIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (46)" failed because error code 0xC020907D occurred, and the error row disposition on "input "OLE DB Destination Input" (46)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Where would I look up: DTS_E_INDUCEDTRANSFORMFAILUREONERROR and 0xC020907D? I understand that it tried to convert a value in something numbered 46 (no idea what that is) and the conversion failed. But that's it. How do I transmogrify 46 to something I can look at. I'm a little fuzzy on what a Destination Input is. Isn't an output a destination?
Or this one:
Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors" Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
I have absolutely no idea what this means except that many things happened, one of them failed, I have an error of some sort and it's error code is 0x80040E21. It must be important, it's in there twice, but what does it mean?
I'm thinking that in the help somewhere all these error messages are listed and I can look them up, but I can't seem to find it anywhere. Am I supposed to be converting them to decimal first?
Any advice from you experts would be much appreciated.
I have a msaccess linked server that I use to execute sql 2000 stored procedures from a front end in adp (access data project) format without any problem, if it is used on the same machine where the sql server resides (with any user logged on). In any other machine on the local network where I also need to use it, I get an ole/db error message saying that the microsoft jet database engine can not open the file because it's allready opened exclusivly or because it do not has permissions. I created the linked server with both UNC and normal path with the same result.
I'm using SqlBulkCopy. Does anyone know how I can output what row (its column names) are throwing a duplicate primary key message when I bulkCopy.WriteToServer(datatable1)?Thanks
Have this dynamic sql statement that I'm working on. It works fine outside the execute (running the query by iteself) and prints fine but when I execute it, I get errors. Spacing is good. Here is the SQL statement. set @sql = 'insert into #participantInfo (strfirstname,strlastname,strindividualfk,strusername,dtelastlogin,blninactive,fk_intrightid,imgPhoto, stre_mail,strmiddleinitial,straddress1,straddress2,strcity,fk_intlocationid,strpostalcode,strhomephone,strbusinessphone,strmiscinfo1, strmiscinfo2,strsecretquestion,dteDateOfBirth,intgender,strsecretanswer) select p.strfirstname,p.strlastname,p.strindividualfk,l.strusername,l.dtelastlogin,p.blninactive,r.fk_intrightid,p.imgPhoto, p.stre_mail,p.strmiddleinitial,p.straddress1,p.straddress2,p.strcity,p.fk_intlocationid,p.strpostalcode,p.strhomephone,p.strbusinessphone, p.strmiscinfo1,p.strmiscinfo2,l.strsecretquestion,p.dteDateOfBirth,p.intgender,l.strsecretanswer from tblparticipants p inner join tblparticipantrights r on p.strindividualfk = r.strindividualfk inner join tblparticipantlogin l on p.strindividualfk = l.strindividualfk where p.fk_strsubgroupid = ''' + @strsubgroupid + '''' exec (@sql) Error messages are: Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipants'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantrights'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantlogin'. Anyone see what may be the cause? thanks ^_^
So far I have not been able to figure out how to get more info regarding the sql server errors. For example, I get this error from sql server query analyzer (this just an example):
----------- Server: Msg 128, Level 15, State 1, Line 5 The name 'does' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted. -----------
Is there a way to find more information regarding this error, or like Oracle has MeataLink, where you can search, if someone else already got this error and how it got resolved?
Or how you folks go about resolving errors you get? Is it based on trail and error, or experience (like already encountered this type before) etc.?
I was wondering if anybody knows where to get a complete list of SQL Server error messages. I am writing a stored procedure that scans SQL Server Logs for errors and if there are errors in the logs, I get paged.
How can I avoid certain messages from SQL Server being recorded into the Event viewer ? For example, every time I truncate the transaction log with 'Backup log with truncate_only', It is being recorded into the Event viewer as an Error. But, I know that it is not an error. How can I avoid this ?
