Error Msg While Running Relatively Simple Query (large Result Set)

Jul 17, 2007

While running query below on SQL Server 2005 (Build 3790: Service Pack 2):



SELECT DISTINCT pkg.PrimaryBarcode

FROM dbo.Package AS pkg (NOLOCK)

JOIN dbo.PackageCycle AS pc (NOLOCK)

ON pkg.PackageKey = pc.PackageKey

WHERE (pkg.BillCycleDateKey >= 20061201) OR

(pkg.BillStatusKey = 1)



I received a partial result set followed by

An error occurred while executing batch. Error message is: Couldn't replace text



I suspect this is a memory issue, but cannot find any reference to this particular msg on the Microsoft forums or the other 3rd party forums. PrimaryBarcode is a varchar(50)



I am not sure where to go from here. I would appreciate any ideas. Thanks in advance.



Cheers,

Mike Byrd

View 2 Replies


ADVERTISEMENT

Result Of Query So Large?

Feb 19, 2004

Hi all,
i have a problem ...
if there is a query that returns so many rows. I want to know where the result is stored? for example:what database?, what table?, what transaction log file?
Thanks fr reading.

View 3 Replies View Related

Large Long Running Query

Mar 20, 2008



The query show below is designed to use seasonal profiles to compute 53 weeks of forecast data and then from that compute the number of weeks of supply of each item at each location. The query works but the volume of data produced (20+M rows) is substantial. If I limit the CTE to a single location, it run is 2 seconds and returns 41,000 rows. But when run for all locations and items, it runs for more than 4 hours. Would I do better converting the CTE to a sub-query and adding an index to improve the performance of the main query?


WITH Forecast AS

(SELECT Location_Idx

,Item_Idx

,Week_Code

,(CAST(AnnualQty AS DECIMAL(9))/53.0)*[Profile] AS fcst

FROM dbo.FactReplenishmentProfile rp

INNER JOIN dbo.FactSeasonalProfile sp

ON sp.SeasonalProfile_Idx = rp.SeasonalProfile_Idx

)

SELECT fcst1.Location_Idx

,fcst1.Item_Idx

,fcst1.Week_Code

,fcst1.fcst AS WeekQty

,SUM(fcst2.fcst) AS CumQty

FROM Forecast fcst1

INNER JOIN Forecast fcst2

ON fcst2.Location_Idx = fcst1.Location_Idx

AND fcst2.Item_Idx = fcst1.Item_Idx

AND fcst2.Week_code <= fcst1.Week_Code

GROUP BY fcst1.Location_Idx,fcst1.Item_Idx,fcst1.Week_code,fcst1.fcst

View 4 Replies View Related

Re-display Result Set Without Re-running Query In Query Analyzer?

Apr 9, 2006

I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.

View 6 Replies View Related

Different Result Running SQL Query Directly Or Using SqlCommand

Sep 11, 2006

Hi, when running the following stored procedure: ALTER PROCEDURE [dbo].[GetWerknemersBijLeidinggevende]@LeidinggevendeID int,@Start int = 1,@Limit int = 25,@Sofinummer int = NULL,@Achternaam nvarchar(128) = NULL,@Functie nvarchar(64) = NULL
ASWITH Ordered AS
(
SELECT
ROW_NUMBER() OVER (ORDER BY Achternaam) AS RowNumber,Persoon.*FROM PersoonINNER JOIN DienstverbandON Persoon.ID = Dienstverband.PersoonIDINNER JOIN BedrijfsonderdeelON Bedrijfsonderdeel.ID = Dienstverband.BedrijfsonderdeelIDINNER JOIN LeidinggevendeON Bedrijfsonderdeel.ID = Leidinggevende.BedrijfsonderdeelIDWHERE
Leidinggevende.Begindatum <= getdate()AND (Leidinggevende.Einddatum > getdate()OR Leidinggevende.Einddatum IS NULL
)
AND Leidinggevende.PersoonID = @LeidinggevendeIDAND
(
Sofinummer = @Sofinummer
OR @Sofinummer IS NULL
)
AND
(
Achternaam LIKE @AchternaamOR AchternaamPartner LIKE @AchternaamOR @Achternaam IS NULL
)
)
SELECT *FROM OrderedWHERE RowNumber between @Start and (@Start + @Limit - 1)  When I run this in the database and fille de LeidinggevendeID parameter with a value I get a few rows returned, however when I run the following code: [DataObject(true)] public class PersoonFactory { [DataObjectMethod(DataObjectMethodType.Select, false)] public static IList WerknemersBijLeidinggevende(int ldgID, int start, int max) { IList list = new List(); SqlDataReader rdr = null; SqlConnection connection = DatabaseProvider.Connection; SqlCommand command = new SqlCommand("GetWerknemersBijLeidinggevende", connection); command.Parameters.AddWithValue("LeidinggevendeID", ldgID); command.CommandType = CommandType.StoredProcedure; try
{
connection.Open();
rdr = command.ExecuteReader(CommandBehavior.CloseConnection);
while (rdr.Read()) { Persoon pers = new Persoon(); pers.ID = rdr["ID"] as int?; pers.Achternaam = rdr["Achternaam"] as string; pers.AchternaamPartner = rdr["AchternaamPartner"] as string; pers.Achtertitels = rdr["Achtertitels"] as string; pers.DatumOverlijden = rdr["DatumOverlijden"] as DateTime?; pers.Geboortedatum = rdr["Geboortedatum"] as DateTime?; pers.Geslacht = rdr["Geslacht"] as string; pers.Middentitels = rdr["Middentitels"] as string; pers.Naamgebruik = (int)rdr["Naamgebruik"]; pers.Sofinummer = rdr["Sofinummer"] as string; pers.Voorletters = rdr["Voorletters"] as string; pers.Voortitels = rdr["Voortitels"] as string; pers.Voorvoegsel = rdr["Voorvoegsel"] as string; pers.VoorvoegselPartner = rdr["VoorvoegselPartner"] as string; list.Add(pers); } } catch
{
throw; } finally
{
if (rdr != null) rdr.Close(); else connection.Close(); } return list; }  I get 0 rows all of a sudden. Any idea why? 

View 7 Replies View Related

Saving Query Result To A File , When View Result Got TLV Error

Feb 13, 2001

HI,
I ran a select * from customers where state ='va', this is the result...

(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes

I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record

Thanks for your help

Ali

View 1 Replies View Related

TempDB Log File Running Out Of Free Space While Running DBCC CheckDB On Large Database

May 28, 2015

In my environment, there is maintenance plan configured on one of the server and while running DBCC checkdb on a database of size around 200GB, log file usage of tempdb is increasing and causing the maintenance job to fail.

What can I do to make the maintenance job run successfully, size of the tempdb database is only 50GB and recovery model is set to simple. It cannot be increased as the mount point on which it is residing is 50GB.

View 3 Replies View Related

Retrieving Large Result Set.

Sep 11, 2001

Hello,
I have a web application which retrieves values from a table and the table has grown really huge now. This has slowed down the performance and I need to do something else instead of the select statement that I currently have. Can cursors be a solution?
Any help/suggestions would be greatly appreciated.

Thanks,
Subha

View 2 Replies View Related

Error While Executing Simple Query :(

Dec 21, 2007

Hi,

I am using this query to execute but it didn't

declare @AccountID numeric(3,0)
set @AccountID = 101
select * from AccountTest
WHERE AccountID IN
(CASE
WHEN @AccountID = 101 THEN (100,101)
ELSE @AccountID
END)

I m getting error like

Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ','.

Pls help me out

T.I.A

View 3 Replies View Related

Error With A Simple JOIN Query....

Apr 12, 2007

Hi!



I've a big problem by using the following query :






Code Snippet

public SqlCeResultSet selectRSQuery(String query)

{

SqlCeResultSet resultSet = initializeCommand(query).ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);

return resultSet;

}



SqlCeResultSet resultSet = sgb.selectRSQuery(

"SELECT p.pId, p.pLogin FROM Profiles p, ProfilesGroups pg, Groups g " +

"WHERE g.gId = pg.tpGroupId " +

"AND p.pId = pg.tpProfileId " +

"AND g.gProfileID = '" + app.Settings.Default.id + "'");



It return me this error :

Cannot generate an updatable cursor for the query because there is a non-standard join expression.



What can I do??



Thxx

View 9 Replies View Related

Error While Running Query

Mar 2, 2004

Hi,

SQL Server 7
When i ran a query in query analyzer i am getting the below error.
once i closed and opened the query analyzer and ran the same query it worked fine.

pls the error which i got in first time.

Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large

Pls help me in this

TIA
Adil

View 5 Replies View Related

Error While Running A Query

Dec 12, 2007

I have recieved the following error message while running a query on SQL2k5 on a Windows 2003 64-bit EE server


"The operating system returned error 1450(error not found) to SQL Server during a write at offset 0x00001c32062000 "

I will be grateful if anyone can point me in the right direction on what this can be.

Thanks

View 3 Replies View Related

Package Hanging On OLE DB Command With Large Result Sets

Jul 13, 2007

I have an SSIS package (SQL 2005 SP2 and Visual Studio SP1) that does the following:



OLE DB Source --> Conditional Split --> OLE DB Command #1 --> OLE DB Command #2



The source reads from database A. Each row is variable-width and up to several KB wide, including two ntext columns.



Command #1 executes a stored proc in db A, using a bunch of inputs and two output parameters.



Cmd #2 executes an update in db B, using the two output params from cmd #1 as inputs.



When the rowset size is small, around 500, everything works fine.



However, when the rowset size is larger, around 5000, SSIS hangs when trying to execute cmd #2. The profiler shows that none of the cmd #2 updates are ever executed. No error messages are produced, and the connection never times out -- it just hangs forever.



If I replace the cmd #2 updates with a simple select, everything works fine. If I replace it with a stored proc that does an update, it hangs.



The work-around I came up with was to create a new table in db B, and do inserts into the table, but unless I'm missing something, this still seems like a bug...

View 1 Replies View Related

SQL Server 2008 :: Speed Up Text Search In Large Result Set?

Jul 14, 2015

I have a query below which filters detail field in the #TempLogins table. The details field is a text field which contains many types of text strings, some containing urls that have parts like "ResultID=5" which is what is contained in the ResultIDSearch and ResultSetIDSearch fields. The records with entries like "ResultID=5" are the ones I'm trying to filter for.

The problem I have is that the query takes way too long to run. The TempLogin table has around 200 K records and the TempSearch table has around 80 K records.

select * from #TempLogins a where exists
(select 1 from #TempSearch t1 where
a.detail like '%' + t1.ResultIDSearch + '%'
or
a.detail like '%' + t1.ResultSetIDSearch + '%')

View 1 Replies View Related

Strange Result From A Simple JOIN

Sep 18, 2007



I am currently studying Transact SQL and playing around with queries from a sample database. Recently I created the following query.


USE MemtrackSQL

SELECT m1.MemberID, m1.Surname, m1.FirstName, m1.DateOfBirth

FROM tblMember m1 JOIN tblMember m2

ON m1.FirstName = m2.FirstName

WHERE m1.MemberID <> m2.MemberID


This simple query is designed to show all members with the same first name as other members. The result I got shows duplicates of existing members an inconsistent number of times even though I specified not to show duplicates with WHERE m1.MemberID <> m2.MemberID


2 Scharenguivil Rodney 1958-06-24 00:00:00.000
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
5 O'Grady Patrick 1975-09-23 00:00:00.000
7 Greenfield Lynne 1955-07-26 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000


Any help in explaining where I have gone wrong here would be greatly appreciated.

Cheers

View 3 Replies View Related

Error In Running DTS Package From Query Analyzer

Apr 27, 2001

I am trying to run DTS package from query analyzer and getting following error .

Command from query analyzer is

go
master..xp_cmdshell 'dtsrun /Sirhahadb01 /Usa /P<sa password> /Ntestpack'

Output error message is

output
DTSRun: Loading...

DTSRun: Executing...

DTSRun OnStart: DTSStep_DTSDataPumpTask_1

DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147217887 (80040E21)

Error string: Errors occurred

Error source: Microsoft OLE DB Provider for SQL Server

Help file:

Help context: 0



Error Detail Records:



Error: -2147217887 (80040E21); Provider Error: 0 (0)

Error string: Errors occurred

Error source: Microsoft OLE DB Provider for SQL Server

Help file:

Help context: 0



DTSRun OnFinish: DTSStep_DTSDataPumpTask_1

DTSRun: Package execution complete.



Sujit

View 2 Replies View Related

End Result Is Main Query Results Ordered By Nested Result

May 1, 2008

As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:

SHOWS
showID
showTitle

SHOWACCESS
showID
remoteID

VIDEOS
videoDate
showID

SQL is as follows:

SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;

I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?

thanks

View 3 Replies View Related

C Part Running Out Of Room, Large MDF, LDF Files

Sep 20, 2005

Hi my data files sit in the default directories and I think they are causing my partition to run out of space. I mainly use one db that I created but don't use the others (ie master, model, tempdb, etc). Yet I see their MDF and LDF files are growing. What can I do to shrink them down or perhaps move them off to a larger partition after shrinking?

View 6 Replies View Related

SQL Server 2012 :: Asynchronous Cursor Population Slow For Large Result Sets

Jul 2, 2015

so async cursor population is supposed to create the cursor and return the cursor id quickly, while the server works on async populating the results. For a keyset-driven cursor, SQL Server stores the key sets in tempdb, which it then uses to fetch data for cursor results. Anyway, this works fine for smaller tables, but I'm finding for large result sets, the async cursor population is very slow and indeed seems to approximate synchronous time. The wait stat I get while it is running (supposedly asynchronously) is TRANSACTION_MUTEX.

Example:
--enable async cursor
exec dbo.sp_configure 'cursor threshold', 0; reconfigure;
declare @cursor int, @stmt nvarchar(max), @scrollopt int, @ccopt int, @rowcount int;
--example of giant result set
set @stmt = 'select * from sys.all_objects o1, sys.all_objects o1';

[code]...

Note that using the SQL "select * from sys.all_objects o1" is much faster than "select * from sys.all_objects o1, sys.all_objects o2". However, if cursor population is async, I'd expect the time to return a cursor id to be similar between the two.

View 7 Replies View Related

Communication Link Failure Error When Running A Distributed Query

Apr 12, 2007

Hello

TestMachine1 runs SQL2005 SP2 and has as linked server myRemoteServer (SQL2000) server. I run an stored procedure in TestMachine1 which inserts about 20,000 rows to a table in myRemoteServer and brings back a similar quantity of rows. This stored procedures take about 1.5min to complete, but no error appears.

When running the same stored procedure in TestMachine2 (also SQL2005SP2), the following error appears after about 1 minute of execution (not the exact text):

SQLNCli. TCP Provider: network name is no longer available - communication link failure.

Please note that this stored procedure worked before on TestMachine2 (but with less than 10,000 rows) and that connectivity is proven among TestMachine1 and myRemoteServer, since I can execute "select * from synonym_MyRemoteTable" with no problems at all in the TestMachine2's Management Studio.

TestMachine1 and TestMachine2 have Windows XP Professional SP2; myRemoteServer has Windows 2003 and SQL Server 2000 SP4.

Can you please help me to avoid this error?

View 1 Replies View Related

Running A Stored Procedure Using Output Result.

May 12, 2008

Hey guys!

I've come a huge ways with your help and things are getting more and more complicated, but i'm able to figure out a lot of things on my own now thanks to you guys! But now I'm REALLY stuck.

I've created a hierarchal listbox form that drills down From

Product - Colour - Year.

based on the selection from the previous listbox. i want to be able to populate a Grid displaying availability of the selected product based on the selections from the listboxes.

So i've written a stored procedure that selects the final product Id as an INPUT/OUTPUT based on the parameters PRODUCT ID - COLOUR ID - and YEAR ID. This outputs a PRODUCT NUMBER.

I want that product number to be used to populate the grid view. Is there away for me to do this?

Thanks in advanced everybody!

View 6 Replies View Related

How To Kill A Long Running Query Running On A Background Thread.

Sep 1, 2006


If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?

The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.

Is there a way to do this?

Thanks


View 1 Replies View Related

Transact SQL :: Server Is Cutting Off Result-output Running A Powershell Script

May 7, 2015

I want to run a powershell script using xp_cmdshell, put the results into a temp table and do some additional stuff.I'm using:

CREATE TABLE #DrvLetter (
iid int identity(1,1) primary key
,Laufwerk char(500),
)
INSERT INTO #DrvLetter
EXEC xp_cmdshell 'powershell.exe -noprofile -command "gwmi -Class win32_volume | ft capacity, freespace, caption -a"'
select * from #DrvLetter
SQL server is cutting off the output, what I get is (consider the 3 dots at the end of a line):
 
[code]....

View 2 Replies View Related

Running A Large Number Of SSIS Packages (with Dtexec Utility) In Parallel From A SQL Server Agent Job Produces Errors

Jan 11, 2008

Hi,

I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €œdtexec€? command from inside an SQL Server job.

I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.

The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.

The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).

We have one €œmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €œdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).

I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.

In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €œcmdexec€? that runs the €œmain€? SSIS package with the €œdtexec€? command).

If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.

The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.

Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.

I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).

Additional information:

The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €œMessage€? is empty (€œMessage: €œ).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €œmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.

The request:

Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!

Eero Ringmäe

View 2 Replies View Related

Large Reports - Error: The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive.

Mar 13, 2008

First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.




I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.




Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

Here is the api call:




Code Snippet

byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,

out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:


set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.

View 1 Replies View Related

SP To Perform Query Based On Multiple Rows From Another Query's Result Set

Nov 7, 2007

I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w.  one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included)         INSERT INTO @users             SELECT u.userName,u.userID                 FROM  tableU u                LEFT JOIN tableW w ON w.workgroupID = u.workgroupID                WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is:             SELECT u.userName,u.userID
                FROM  tableU u
                LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
                WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!    

View 1 Replies View Related

Same Query Gives Result With Different Column Sequence When Used In Query Analyzer

Feb 25, 2012

When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.

result in Excel 2003 SQL OLE DB query

col-A col-B col-C
values...

Result with Query Analyzer and VBA Macro

col-c col-B col-A
values...

View 3 Replies View Related

Transact SQL :: SELECT On Column Name From Query Result Set In Same Query?

May 9, 2015

I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).

To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:

COLUMN_NAME Value
----------- -----
colB        123
colA        XYZ

I've tried dynamic SQL to no success, probably not executing the concept correctly...

Below is what I have:

CREATE TABLE myTable (colA VARCHAR(3), colB VARCHAR(3), colC VARCHAR(3))
INSERT INTO myTable (colA, colB, colC) VALUES ('ABC', '123', '0X')
INSERT INTO myTable (colA, colB, colC) VALUES ('XYZ', '789', 'X0')
;WITH cte AS
(
SELECT CAST(PATINDEX('%[^0]%', colC) AS SMALLINT) pos, STUFF(colC, 1, PATINDEX('%[^0]%', colC), '') colC

[Code] ....

View 4 Replies View Related

Working Since Morning, Simple Error But Unable To Resolve, ERROR : 26 , Please Help

Dec 15, 2006

dear friends,
 i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :

--------------------------------------------------------- Beginning of Error Message -------------------------------------------------- 
 An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:

If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message -------------------------------------------------- 
then when i checked the Machine.config file, i found this....
  <connectionStrings>    <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />  </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or  2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh 

View 2 Replies View Related

Return Result From One Query As A Column In Other Query

Jun 3, 2004

I'm having a bit of a trouble explaining what I'm trying to do here.

I have 3 "source" tables and a "connecting" table that I'm going to use

tblContacts - with contactID, ContactName etc
tblGroups - with GroupID, GroupName
tblSubGroups - with SubGroupID, GroupID and SubGroupName (groupID is the ID for the parent Group from tblGroups)

They are related in a table called
tblContactsGroupConnection - with ContactID, GroupID and SubGroupID

One contact can be related to many subgroups.
What I want is a list of all contacts, with their IDs, names and what groups they are related to:

ContactID, ContactName, [SubGroupName1, SubGroupName2, SubGroupName3]
ContactID, ContactName, [SubGroupName1, SubGroupName3]
ContactID, ContactName, [SubGroupName3]

I'm sure there's a simple solution to this, but I can't find it. Any help appreciated. :)

Kirikiri

View 1 Replies View Related

Save Query Result At CSV Or TXT File From The Query

Dec 10, 2007

We can save query output save as CSV file directly from the Query Analyzer window. I have done it at last few year before. Now I need it.Can anyone please give the one example for the same.

Thanks
Amit K Patel

View 7 Replies View Related

How Do We Tune A Large Sql Query

Feb 6, 2006

hi,I have a problem asked by one of my senior person and finding theanswer .What is the step by step procedure for tune a large sql query.OR how do we tune a large SQL query with somany joins

View 6 Replies View Related

Error.log Too Large

Jan 10, 2007

this file is getting upto 110GIG why?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved