hey expert out ther..
i have encounter this error ..and i dont know what is the wrong with it..
the error goes:
No row was updated
Error source: .net SQLClient Data provider
Error Message:string or binary data would be trancated.
plz help me to slove this prob.
thanks in advance!!!!!!!
Hi,I want to save the last modification date when the row is updated. I have a column called "LastModification" in the table, every time the row is update I want to set the value of this column to the current date. So far all I know is that I need to use a trigger and the GetDate() function, but could any body help me with how to set the value of the column to getdate()? thanks for your help.
View 3 Replies View RelatedSQL 2000 to SQL 2005 Upgrade Error - Database Down - Help Appreciated
I am upgrading a SQL 2000 standard database server to SQL 2005 standard on a windows 2003 server
I am logged in as domain admin and started the upgrade as 'sa'
The upgrade stops with the error:
Service MSSQLSERVICE can not be started. Verify you have sufficient privilages to start system services. The error code is (17185)
The error log shows:
2007-01-04 15:59:38.77 Server Authentication mode is MIXED.
2007-01-04 15:59:38.79 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-01-04 15:59:38.79 Server (c) 2005 Microsoft Corporation.
2007-01-04 15:59:38.79 Server All rights reserved.
2007-01-04 15:59:38.79 Server Server process ID is 4188.
2007-01-04 15:59:38.79 Server Logging SQL Server messages in file 'F:SQLDataMSSQLlogERRORLOG'.
2007-01-04 15:59:38.79 Server This instance of SQL Server last reported using a process ID of 2980 at 1/4/2007 3:56:58 PM (local) 1/4/2007 2:56:58 AM (UTC). This is an informational message only; no user action is required.
2007-01-04 15:59:38.79 Server Registry startup parameters:
2007-01-04 15:59:38.79 Server -d F:SQLDataMSSQLdatamaster.mdf
2007-01-04 15:59:38.79 Server -e F:SQLDataMSSQLlogERRORLOG
2007-01-04 15:59:38.79 Server -l F:SQLDataMSSQLdatamastlog.ldf
2007-01-04 15:59:38.79 Server Command Line Startup Parameters:
2007-01-04 15:59:38.79 Server -s MSSQLSERVER
2007-01-04 15:59:38.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-01-04 15:59:38.79 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-01-04 15:59:38.83 Server Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2007-01-04 15:59:39.02 Server Using the static lock allocation specified in the locks configuration option. Allocated 20000 Lock blocks and 20000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-01-04 15:59:39.02 Server Multinode configuration: node 0: CPU mask: 0x0000000a Active CPU mask: 0x0000000a. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2007-01-04 15:59:39.04 Server Multinode configuration: node 1: CPU mask: 0x00000005 Active CPU mask: 0x00000005. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2007-01-04 15:59:39.04 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-01-04 15:59:41.04 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-01-04 15:59:41.04 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-01-04 15:59:41.04 spid7s Starting up database 'master'.
2007-01-04 15:59:41.05 spid7s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.07 spid7s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.07 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.08 spid7s SQL Trace ID 1 was started by login "sa".
2007-01-04 15:59:41.08 spid7s Starting up database 'mssqlsystemresource'.
2007-01-04 15:59:41.11 spid7s Using 'dbghelp.dll' version '4.0.5'
2007-01-04 15:59:41.11 spid7s ***Stack Dump being sent to F:SQLDataMSSQLLOGSQLDump0035.txt
2007-01-04 15:59:41.11 spid7s SqlDumpExceptionHandler: Process 7 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2007-01-04 15:59:41.11 spid7s * *******************************************************************************
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * BEGIN STACK DUMP:
2007-01-04 15:59:41.11 spid7s * 01/04/07 15:59:41 spid 7
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * Exception Address = 78144D3A Module(MSVCR80+00014D3A)
2007-01-04 15:59:41.11 spid7s * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2007-01-04 15:59:41.11 spid7s * Access Violation occurred reading address 0000001E
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * MODULE BASE END SIZE
2007-01-04 15:59:41.11 spid7s * sqlservr 01000000 02BA7FFF 01ba8000
2007-01-04 15:59:41.11 spid7s * ntdll 7C800000 7C8BFFFF 000c0000
2007-01-04 15:59:41.11 spid7s * kernel32 77E40000 77F41FFF 00102000
2007-01-04 15:59:41.11 spid7s * MSVCR80 78130000 781CAFFF 0009b000
2007-01-04 15:59:41.11 spid7s * msvcrt 77BA0000 77BF9FFF 0005a000
2007-01-04 15:59:41.11 spid7s * MSVCP80 7C420000 7C4A6FFF 00087000
2007-01-04 15:59:41.11 spid7s * ADVAPI32 77F50000 77FEBFFF 0009c000
2007-01-04 15:59:41.11 spid7s * RPCRT4 77C50000 77CEEFFF 0009f000
2007-01-04 15:59:41.11 spid7s * USER32 77380000 77411FFF 00092000
2007-01-04 15:59:41.11 spid7s * GDI32 77C00000 77C47FFF 00048000
2007-01-04 15:59:41.11 spid7s * CRYPT32 761B0000 76242FFF 00093000
2007-01-04 15:59:41.11 spid7s * MSASN1 76190000 761A1FFF 00012000
2007-01-04 15:59:41.11 spid7s * Secur32 76F50000 76F62FFF 00013000
2007-01-04 15:59:41.11 spid7s * MSWSOCK 71B20000 71B60FFF 00041000
2007-01-04 15:59:41.11 spid7s * WS2_32 71C00000 71C16FFF 00017000
2007-01-04 15:59:41.11 spid7s * WS2HELP 71BF0000 71BF7FFF 00008000
2007-01-04 15:59:41.11 spid7s * USERENV 76920000 769E3FFF 000c4000
2007-01-04 15:59:41.11 spid7s * opends60 333E0000 333E6FFF 00007000
2007-01-04 15:59:41.11 spid7s * NETAPI32 71C40000 71C97FFF 00058000
2007-01-04 15:59:41.11 spid7s * SHELL32 7C8D0000 7D0D2FFF 00803000
2007-01-04 15:59:41.11 spid7s * SHLWAPI 77DA0000 77DF1FFF 00052000
2007-01-04 15:59:41.11 spid7s * comctl32 77420000 77522FFF 00103000
2007-01-04 15:59:41.11 spid7s * psapi 76B70000 76B7AFFF 0000b000
2007-01-04 15:59:41.11 spid7s * instapi 48060000 48069FFF 0000a000
2007-01-04 15:59:41.11 spid7s * sqlevn70 4F610000 4F7A0FFF 00191000
2007-01-04 15:59:41.11 spid7s * SQLOS 344D0000 344D4FFF 00005000
2007-01-04 15:59:41.11 spid7s * rsaenh 68000000 6802EFFF 0002f000
2007-01-04 15:59:41.11 spid7s * AUTHZ 76C40000 76C53FFF 00014000
2007-01-04 15:59:41.11 spid7s * MSCOREE 61FB0000 61FF4FFF 00045000
2007-01-04 15:59:41.11 spid7s * ole32 77670000 777A3FFF 00134000
2007-01-04 15:59:41.11 spid7s * msv1_0 76C90000 76CB6FFF 00027000
2007-01-04 15:59:41.11 spid7s * iphlpapi 76CF0000 76D09FFF 0001a000
2007-01-04 15:59:41.11 spid7s * kerberos 62220000 62277FFF 00058000
2007-01-04 15:59:41.11 spid7s * cryptdll 766E0000 766EBFFF 0000c000
2007-01-04 15:59:41.11 spid7s * schannel 76750000 76776FFF 00027000
2007-01-04 15:59:41.11 spid7s * COMRES 77010000 770D5FFF 000c6000
2007-01-04 15:59:41.11 spid7s * XOLEHLP 622E0000 622E5FFF 00006000
2007-01-04 15:59:41.11 spid7s * MSDTCPRX 622F0000 62367FFF 00078000
2007-01-04 15:59:41.11 spid7s * msvcp60 780C0000 78120FFF 00061000
2007-01-04 15:59:41.11 spid7s * MTXCLU 62370000 62388FFF 00019000
2007-01-04 15:59:41.11 spid7s * VERSION 77B90000 77B97FFF 00008000
2007-01-04 15:59:41.11 spid7s * WSOCK32 71BB0000 71BB8FFF 00009000
2007-01-04 15:59:41.11 spid7s * OLEAUT32 77D00000 77D8BFFF 0008c000
2007-01-04 15:59:41.11 spid7s * CLUSAPI 62390000 623A1FFF 00012000
2007-01-04 15:59:41.11 spid7s * RESUTILS 623B0000 623C2FFF 00013000
2007-01-04 15:59:41.11 spid7s * DNSAPI 76ED0000 76EF8FFF 00029000
2007-01-04 15:59:41.11 spid7s * winrnr 76F70000 76F76FFF 00007000
2007-01-04 15:59:41.11 spid7s * WLDAP32 76F10000 76F3DFFF 0002e000
2007-01-04 15:59:41.11 spid7s * rasadhlp 76F80000 76F84FFF 00005000
2007-01-04 15:59:41.11 spid7s * security 62800000 62803FFF 00004000
2007-01-04 15:59:41.11 spid7s * dbghelp 671B0000 672C7FFF 00118000
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * Edi: 62FA0040: 62FA0028 671AFFF0 00000000 00000000 00000000 00000000
2007-01-04 15:59:41.11 spid7s * Esi: 0000001E:
2007-01-04 15:59:41.11 spid7s * Eax: 0416C05E: C0400096 C0400416 00000416 000062FA 00000000 00000000
2007-01-04 15:59:41.11 spid7s * Ebx: 0416C040: 0105F270 00002000 00000005 00000000 3368C1E0 00000000
2007-01-04 15:59:41.11 spid7s * Ecx: 0105B010: 458B0046 01F88348 00D3850F 458B0000 89C23B50 0F342444
2007-01-04 15:59:41.11 spid7s * Edx: 00000000:
2007-01-04 15:59:41.11 spid7s * Eip: 78144D3A: 24FFA5F3 144E5495 C78B9078 000003BA 04E98300 E0830C72
2007-01-04 15:59:41.11 spid7s * Ebp: 33D6E770: 33D6E790 01C65B97 62FA0040 0000001E 0416C040 0416C6DC
2007-01-04 15:59:41.11 spid7s * SegCs: 0000001B:
2007-01-04 15:59:41.11 spid7s * EFlags: 00010212: 0020006D 00690046 0065006C 005C0073 006F0043 006D006D
2007-01-04 15:59:41.11 spid7s * Esp: 33D6E768: 62FA0040 33D6E7A4 33D6E790 01C65B97 62FA0040 0000001E
2007-01-04 15:59:41.11 spid7s * SegSs: 00000023:
2007-01-04 15:59:41.11 spid7s * *******************************************************************************
2007-01-04 15:59:41.11 spid7s * -------------------------------------------------------------------------------
2007-01-04 15:59:41.11 spid7s * Short Stack Dump
2007-01-04 15:59:41.13 spid7s 78144D3A Module(MSVCR80+00014D3A)
2007-01-04 15:59:41.13 spid7s 01C65B97 Module(sqlservr+00C65B97)
2007-01-04 15:59:41.13 spid7s 01CA43B5 Module(sqlservr+00CA43B5)
2007-01-04 15:59:41.13 spid7s 01CA452E Module(sqlservr+00CA452E)
2007-01-04 15:59:41.13 spid7s 0217D3BD Module(sqlservr+0117D3BD)
2007-01-04 15:59:41.13 spid7s 0217B896 Module(sqlservr+0117B896)
2007-01-04 15:59:41.13 spid7s 0100889F Module(sqlservr+0000889F)
2007-01-04 15:59:41.13 spid7s 010089C5 Module(sqlservr+000089C5)
2007-01-04 15:59:41.13 spid7s 010086E7 Module(sqlservr+000086E7)
2007-01-04 15:59:41.13 spid7s 010D764A Module(sqlservr+000D764A)
2007-01-04 15:59:41.13 spid7s 010D7B71 Module(sqlservr+000D7B71)
2007-01-04 15:59:41.13 spid7s 010D746E Module(sqlservr+000D746E)
2007-01-04 15:59:41.13 spid7s 010D83F0 Module(sqlservr+000D83F0)
2007-01-04 15:59:41.13 spid7s 781329AA Module(MSVCR80+000029AA)
2007-01-04 15:59:41.13 spid7s 78132A36 Module(MSVCR80+00002A36)
2007-01-04 15:59:41.13 spid7s Stack Signature for the dump is 0x2BEDE9E0
2007-01-04 15:59:41.27 spid7s External dump process return code 0x20000001.
External dump process returned no errors.
2007-01-04 15:59:41.27 spid7s Error: 17185, Severity: 16, State: 1.
2007-01-04 15:59:41.27 spid7s Unable to update password policy.
2007-01-04 15:59:41.27 spid7s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Any clues?
Cheers
Paul
i am getting the above error on my database i have 2 rows with the same info on and another 2 with the same info on. example:
ID username password
1 bob bob
1 bob bob
1 john john
1 john john
I know this is a fault with ms sql 2005 however how do i fix it?
Ive found this link which explains everything but how do i start a query. I tried clicking on new query and copying the code. What is table1 meant to be? the database is dbl.tbl_admin. It wont find my database.
Im not sure how to do it anyway.
I need to change it though as its my admin password and Ive given it out to web design companys
http://geekswithblogs.net/allensb/archive/2006/07/27/86484.aspx
Can some 1 read the above page and give me full instructions, I dont know what im doing thanks
info@uktattoostudios.co.uk
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedHi Im doing a simple update in my SP: update users set Name = @Name where id=@userID and password=@password i want to know if a row gets updated. for example if the userID and password dont match then the row will not get updated.so i want some way to tell if a row has been updated. how do i do this?thanks
View 3 Replies View RelatedHi everybody,
I am a total noob conserning ASP, but I am willing to learn
We have a sql2005 SRV(hosted by our ISP, so limited access) and a ASP based forum (WEB WIZ)
When I try to login I get this error: Support Error Code:- err_SQLServer_loginUser()_update_USR_CodeFile Name:- functions_login.aspError details:-Microsoft OLE DB Provider for ODBC DriversQuery cannot be updated because the FROM clause is not a single simple table name.Can somebody tell me whats wrong?
Thanx in advance.
Gerry de Bruijn!
Hi -
apologies if this is not the right forum for this - I've searched a bit and this seems to be the best fit.
I have the following problem: I want to update records in a table that fit certain criteria. The way the insert logic works make sure that there will always be only one record that fits the criteria and I'd like to get the ID value of that record once the update went through. So here is what I tried:
1 UPDATE Timeslot
2 SET StartTime = @StartTime, EndTime = @EndTime
3 WHERE (ProfessionalID = @ProfessionalID) AND (ProviderLocationID = @ProviderLocationID) AND (RequestID IS NULL) AND (StartTime > @StartTime) AND
4 (EndTime < @EndTime);
5 SELECT SCOPE_IDENTITY()
My hope was that the select scope_identity would return the Timeslot ID of the row that was affected, but it doesn't. How do I get that row?
Thanks!!!
Oliver
is there a such thing as a "UPDATED table".. as in a trigger's INSERTED table or DELETED table ....
View 1 Replies View RelatedHow can I determine who and when a table in a db was updated, I dont need this per record, I only need to know the last time an update was made to a table. Thanks.
View 1 Replies View RelatedIs there a way to tell when a file was last updated?
View 1 Replies View RelatedIf I update a recordset a group of records using dynamic SQL where I update the TOP n records, is it possible to get the set of records that was updated?
CREATE PROCEDURE usp_Structural_ScheduleComponent
@cProject char(7),
@cComponentID char(10),
@iPour int,
@iQuantity int,
@iAvailable int OUTPUT,
@dtCast datetime OUTPUT
AS
SET @dtCast = convert(char(10), getdate(), 120)
DECLARE @cSql varchar(500)
SET @cSql = 'UPDATE tbStructuralComponentSchedule SET PourNumber = ' + CAST (@iPour AS VARCHAR) + ', ScheduledDate = ' + '''' + CAST(@dtCast AS VARCHAR) + '''' +
' WHERE EntryID IN ( SELECT TOP ' + CAST(@iQuantity AS VARCHAR) +
' FROM tbStructuralComponentSchedule ' +
' WHERE fkProjectNumber = ' + '''' + @cProject + '''' +
' AND fkComponentID = ' + '''' + @cComponentID + '''' +
' AND IssueDate IS NOT NULL' +
' AND ScheduledDate IS NULL' +
' ORDER BY EntryID DESC)'
EXEC(@cSql)
IF(@@ERROR <> 0 OR @@ROWCOUNT < = 0)
RAISERROR('Failed to add components to pour!',16,1)
SELECT @iAvailable = SUM(CASE WHEN IssueDate IS NOT NULL AND ScheduledDate IS NULL THEN 1 ELSE 0 END)
FROM tbStructuralComponentSchedule WHERE fkProjectNumber = @cProject AND fkComponentID = @cComponentID
GO
-- Is there a way to return the recordset that were modified in the update?
Mike B
Hi,
I am looking for a function (or something else) that shows me, when a row in MS SQL Server was updated the last time. is it possible?
thanks
deviant69
Hi,
Can anybody tell me how to find the column name(s) for recently updated table.
Thanks,
Kishore
Hi,
We run SQL SERVER 2000 on win2000
I've a question regarding Index on a table.
I've a table (1 milj rows) with a extra index ZINDEX1.
Now lets say I insert 1000 rows in that table.
Now what will happend if I search on these NEW rows in my table.
The Index is not updated.
//Martin
We have a third party process that runs and updated several SQL tables.
Is there any way to find out what tables are being updated and store it in another table?
Guys,
Is there a way to find out when a certain DB object (e.g. Stored procedure) was last modified?
SYSOBJECTS table contains crdate and refdate fields. None of these, however, appear to tell me when when the object was last updated.
Any suggestions?
Thanks a lot
Is there a command that will tell me the number of rows that are updated in a statement. I would like to put this in an Stored Procedure and pass the #rows updated back out.
View 1 Replies View RelatedI have a table written in to sql by the program Wincc flex wich is currently constantly saving data in to it. I want to reed this data back in to Labview and update it’s content on Labview constantly to plot a graph that keeps updating over time.
I have achieved this after some research but my problem is that I need a way of just reading the last row (meaning most recent row, not last row as the bottom one) inserted in to the table written by wincc and saved in sql WITHOUT having to read all the data and selecting for example the higest value of a timestamp column (which is added by wincc) because this would cause too much lag since the table has a lot of elements and I need to constantly read it. One of the main problems is that the data written by wincc is written in a circular buffer, which does delete 20% of the data when it fill’s up and start writing new data in to the free space, so that the temporal order of the data does nothing to do (at least nothing simple) with the index order in the table. Is there anything like a method to save the index of the last row modified in the table so that labview could read it and directly access the most recent recordset in the table just by index specification on a query?
I am writing a generic trigger in VS 2005 that selects records from the inserted table, and updates an audit table. I am, however, unable to retrieve the name of the table that the insert occurred on. I am using the following code to select the records, and obtain the name.. Can anyone offer any alternatives to accomplishing this task? Thanks in advnace for any help you can provide.
Craig
SqlDataAdapter tableLoader = new SqlDataAdapter("SELECT * FROM inserted", connection);
DataTable insertedTable = new DataTable();
tableLoader.Fill(insertedTable);
string insertedTableName = insertedTable.TableName;
I am trying to insert data to a simple table using SQL express
However , I can see the data saved in the DataSet but not in the actual database.
If I try to insert the same user again , I got primary key violation ???
Here is the insert function :
string SqlConnection = @"Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|QJ.mdf;Integrated Security=True;User Instance=True";
SqlConnection Conn = new SqlConnection(SqlConnection);
SqlDataAdapter DataAdapter = new SqlDataAdapter("SELECT * FROM USERS", Conn);
SqlCommandBuilder ComandBuilder = new SqlCommandBuilder(DataAdapter);
DataAdapter.InsertCommand = ComandBuilder.GetInsertCommand();
DataAdapter.UpdateCommand = ComandBuilder.GetUpdateCommand();
DataSet DS = new DataSet();
DataAdapter.Fill(DS, "USERS");
DataTable DT = DS.Tables["USERS"];
DataRow DR = DT.NewRow();
DR["NAME"] = txtUserName.Text;
DR["Password"] = txtPass.Text;
DR["Type"] = 1;
DT.Rows.Add(DR);
DataAdapter.Update(DS,"USERS");
DS.AcceptChanges();
Conn.Close();
I dont know what I have done wrong
Please help
Thanks very much
is there any way to know when was the table last touch (updated) in all scenarios (insert, delete, update, etc..)?
View 4 Replies View RelatedI have some set of records in my table.
The same set of records will be updated often. Now I have a column as "lastupdated"
While i am displaying the records in a datagrid, The LAST UPDATED record should only be displayed.
Means, the recently updated records should be displayed in datagrid.
Pls give me the sql code / i am also in need of a Stored procedure for this.
I am working in SQL 2005
in the database, there is some information about the applicant: his name, his email, his status (accepted or rejected)....etc.
the page that is shown to the administrator displays the applicant name and his status, when he changes any of the applicants status, an email is sent to that applicant.
is there any way to do that?
thanks in advance
hello all..
i want to update my table information with the value which is currently inserted/updated in another table dynamically..how to get the value of a currently inserted single cell in that table..?
table1 contains Refno,.....Refno is primarykey,identity
table 2 contains uploadID,....uploadID is primary key,identity
table3 contains RefNo,UploadID(both r foriegn keys corresponding to table1 & table2)
how to fill table3 with values(not manually) when i am inserting records into table1 n table2 ..( refno and uploadId are identity columns )..Any Idea..?
thanks in Advance
Anne
Hi all,
i have a table1 with 3,25,000 records in US database.i want to upadate this table information in to table2 in SG database based on some condition (if prodid and skuno match in both tables, then update ordertransferind column in table2 from table1) what is happening is after 10,000 records query is not executing. in status bar it is displaying 'done'. but only 10,000 records are updating not the remaining ones. for this 10,000 records also it is taking more than 1 hour time. i tried by incresing the commandTimeout to max value(99999)...but still it is same...any advise...please suggest...
i am using sql2005,visualstudio 2005....
thanks for the help..
Anne
I want to build an windows application by using a visual C# to Notify the user that his data in the database had been changed ..such like "New Message In Your Mail Box Alert"..So I need to know if there is way that to let the SQL Server send a notify (just like Trigger) ..
View 1 Replies View RelatedI have a front end inteface that adds data to tables in a SQL database.My question is:Is there an easy way of finding out what tables are affected by the update? Is there a sp_ or DBCC command that would give me the update or altered tables?
View 2 Replies View RelatedDoes anyone know if there is an updated Books Online for 2000 published anywhere?? Or even a more recent copy of the 7.0? MS has probably made corrections
to them.
Also, I'm looking for all the free info about DTS for 2000. Not anything that MS publishes, more of a third party evaluation.
Thanks in advance,
Adam
Does anyone know how to get the indentity of the last updated record in a table. I need it for a cascading trigger.
Thank you,
Jody
Till yesterday every thing was fine....after i installed visual studio...god knws wat happnd dat it was not working, i did everything again but noe using my asp.net forms i am unable to write/edit/update the database, though i can view the same.....can any one suggest was might b d problem.
(i have set permissions for IUSER bot Read and Write)
I am trying to write a trigger that, on an update, will check to see if more than one record is being updated. If more than one record is being updated, rollback the transaction and print a message. If not, then commit the transaction and print an OK message.
My problem is I am having troubles writing this trigger. I will post my SQL trigger code so far.
I am new with Triggers, so any help or advice is appreciated.
Code:
CREATE TRIGGER trgPaperCheck
ON BOOK
AFTER UPDATE
AS
IF UPDATE(Paperback)
BEGIN
DECLARE @count AS INT
SELECT @count = COUNT(Paperback)
FROM Book
IF @count > 1
BEGIN
PRINT('Only one Book record can be updated at a time!')
ROLLBACK TRANSACTION
END
ELSE IF @count =1
BEGIN
PRINT('Paperback Updated')
COMMIT TRANSACTION
END
END
Hi all,
I have a data of applicants. Everyday we dump this data into SQL server. Now I need to generate reports everyday so that we can track how many records get updated everyday. Now the thing is that the applicants are in various stages. So my reports need to track the how many applicants changed from stage "abc" to "pqr" and how many changed from "pqr" to "xyz". Now it is not necessary that all the records change stages everyday.
thanks in advance,
Rohit