Hi all, when I create publication with New Publication Wizard. I get the following errors. Did someone meet this before? Can you help me? Thanks!
===================================
SQL Server could not create publication 'JK'. (New Publication Wizard)
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand)
at Microsoft.SqlServer.Replication.ReplicationObject.ExecCommand(String commandIn)
at Microsoft.SqlServer.Replication.ReplicationObject.CommonCreate()
at Microsoft.SqlServer.Replication.Publication.Create()
at Microsoft.SqlServer.Management.UI.CreatePublicationWizard.CreatePublicationThreadMethod()
===================================
Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
Changed database context to 'Test'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=3933&LinkId=20476
------------------------------
Server Name: nxstudio-davidsql2k5_dc
Error Number: 3933
Severity: 16
State: 1
Procedure: sp_addmergepublication
Line Number: 1034
------------------------------
Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
hi I was following the walkthrough "Creating a Mobile Application with SQL Server Mobile" and when I got to the point where you create a "local publication" I couldn't find the link "Local Publication" in my Object Explorer.
I read all the help in books online however id did not tell me how to bring that link there.
I did install the replication component using the CD installation. I have SQL Server 2005 Standard Edition and Visual Studio 2005
I also found the help "Using the Publication Wizard to Create a Publication" but did not know where to locate or start the wizard.
Hi, I've come across this one before in one of the threads, unfortunately for me the author managed to figure it out for his/her self and there for no answer was posted, so can anybody help PLEASE???
Creating Publication
- Creating Publication 'SQLMobile' (Error) Messages * SQL Server could not create publication 'SQLMobile'. (New Publication Wizard)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Invalid object name 'dbo.sysmergepublications'. Publication 'SQLMobile' does not exist. Changed database context to 'SQLMobile'. (Microsoft SQL Server, Error: 208)
Its been created via UI on SQL2005 the distributor is correctly installed i also have not tried creating a publication on any other database.....this is the first.
Hi, everyone, I am new in SQL server 2005. I had setup SQL server 2005 P2P replication. Somehow it did not work one of two way replication. I tried to delete the publication. However I could not do it. have the same problem. When I tried to delete the publication, I got the publication " " does not exist.[SQL server error: 20026]. I tried to use sp_droppublication, it gave me error "the database is not enabled for publication". Nevertheless, I can see the publication in MS SQL Management Studio and Publication monitor with OK status. I could not find the distribution database either.
Could you anyone has ideas to delete this publication? I am sorry I am not a programmer. Please give me more detail explanation if you can. Thanks.
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Automatic identity range support is useful only for publications that allow updating subscribers. Changed database context to 'sodimprumde4'. (Microsoft SQL Server, Error: 21231)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=21231&LinkId=20476
Thanks for any help, If anyone know how to resolve this problem.
using publication from server one to server two. On server one, I have several directories with bcp files. Can the older files and directories be deleted?
In the step of creating a merge publication, as I noticed, the snapshot agent is started sucessfully. But very soon later (few seconds), it was shut down with an error message. I checked in the error history, the following message I found:
"... The replication agent encountered a failure. The step failed"
I also went to msdb.dbo.sysjobsteps and found "Detected nonlogged agent shutdown".
I am at my wits end here. For Replication the Books Online clearly state:
"The option to allow transformations is set at the time you create a publication"
However, I cannot find any options that allow me to do this in the Create Publication Wizard.
Once the Publication has been created I see in the Properties in the Subscription Options tab that "Use DTS to transform data before distributing it to a Subscriber" is set to No and there is no way to change it.
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
This article cannot use the 'subscriber_upload_options' feature because the publication compatibility level is less than 90. Use sp_changemergepublication to set the publication_compatibility_level of publication 'testMR' to '90RTM'. Changed database context to 'test'. Publication 'testMR' has the following property: 'compensate_for_errors'. SQL Server subscribers below version '8.00.0858' will ignore this setting. (Microsoft SQL Server, Error: 21522)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21522&LinkId=20476
I found a bug in Management Studio, which can be reproduced with following steps:
1. Create a new publication with the 'New Publication Wizard' 2. Select a database which contains at least 2 tables. 3. Select 'transactional publicatioon' 4. Select at least 2 tables as articles 5. Set article properties for all table articles 6. Change 'Statement Delivery' to 'Insert statement', 'Update statement' and 'Delete statement' and save the article properties. 7. If you now check the properties for a single article you find that the 'Statement Delivery' is set to 'Do not replicate...'. If you generate this publication and create a subscritpion you will see, that actual no replication take place.
It took me a while to find out why my replication doesn't work! :-((
I have a table that is in a one way transactional publication. I need to create a full-text catalog on this table and have that catalog exist on the subscriber as well. I understand simply creating a FTC for an object in a publication will not cause that FTC to be replicated to the subscribers. I have scripted out the command and tried to use sp_addscriptexec to push it to the subscriber. When I do this, I get the following error:
Last 183 characters in 'sqlcmd' output buffer: Changed database context to 'database'. Msg 574, Level 16, State 1, Server SQLSERVER, Line 2 CREATE FULLTEXT CATALOG statement cannot be used inside a user transaction.
Also, when this script is run directly from the subscriber, it works fine (but since the subscriber is our production machine, I'd prefer to not have to do it that way). I believe I can reinitialize the publication and have the FTC pushed to the subscriber, but this is not ideal either, since some of our databases can be very large and take a long time to initialize.
Is there a better way to accomplishing this other then connecting directly to the subscriber and running the script or by reinitializing the publication? Thanks for your help!
I have three publications on a dev server. All are sql 2005 merge replication (push) with replication running to subscribers on the same instance of sql server (note this is just dev testing).
However, I have just marked one for re-initialisation / create new snapshot / don't upload changes but when I kick off the synchronisation it says it has insufficient permission to run the snapshot.
When I do this for the other two there is no problem.
SQLAgent is running (using LocalSystem) so I don't know why my reinitialisation won't work.
Hi, I disabled a merge publication on my server. I then ran sp_removedbreplication to clean the system tables. Thats fine. When I recreate a new publication on my server now, I still get the red x on my publisher node in my replcation monitor from the error I was getting before. Evenm though this publication is error free. Is it saving an srror flag in one of the sytem tabbles
I had a publication that I removed from the Local Publications folder but it still shows up in Replication Monitor (with a red 'X'). No jobs exist related to this publication either.
Everything is working ok, but I can't get rid of this from the Replication monitor.
I am trying to setup publishing on SQL Server 2000 Enterprise. I will be subscribing from a SQL Mobile 2005 database so I have installed the SQL Server 2000 SP3a Replication Components, .NET Framework 2.0, and the SQL Server 2005 Mobile Edition Server Tools.
I was able to go through the 2005 Mobile Web Synchronization Wizard with no problems. However, when I try to run the Configure Publishing and Distribution Wizard, I get the following message at the end:
SQL Server Enterprise Manager could not configure 'GISSERV' as the Distributor for 'GISSERV' Error 14114: '(null)' is not configured as a Distributor.
The first option I choose is Make 'GISSERV' it's own Distributor. Then, I select the snapshot folder that I shared. And on the third screen, I've tried going with the standard default settings and customizing those settings.
Has anyone else come across this error? Is there anyone else out there replicating from SQL Server 2000 to SQL Server 2005 Mobile?
When running the create publication wizard, I get:
"Error 14294 - Supply either @Job_id or @Job_Name to identify the job"
I had pubs & subs set up, but things were erroring, so I tried deleting everything and wanted to start from scratch, but the last step in the wizard gets me stuck.
Is it ok to clear the tables in the Distribution database that have info from earlier attempts at setting things up ?
Is there a way to delete the distribution database & really start from scratch ?
I have a merge publisher with Snapshot agent for that scheduled to run everyday morning, This was runnning till yesterday. But it is not running today and giving the below error.
Can anyone help me out to solve this error? This is occuring in production environment, i really need a solution as fast as possible.
Error messages: · Message: Failed to read column data Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper) at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause) at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint) at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strDataFile) at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutWorkItem.DoWork(MergeSnapshotProvider snapshotProvider, IBcpOutProvider bcpOutProvider) at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutThreadProvider.DoWork(WorkItem workItem) at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc() at Microsoft.SqlServer.Replication.WorkerThread.AgentThreadProc() at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0) Get help: http://help/0 · Message: Shared Memory Provider: No process is on the other end of the pipe. Stack: (Source: MSSQLServer, Error number: 233) Get help: http://help/233 · Message: Communication link failure Stack: (Source: MSSQLServer, Error number: 233) Get help: http://help/233 · Message: Shared Memory Provider: No process is on the other end of the pipe. Stack: (Source: MSSQLServer, Error number: 233) Get help: http://help/233 Message: Communication link failure Stack: (Source: MSSQLServer, Error number: 233)
Hi.I'm trying to setup a publication but I received an error:The process could not bulk copy out of table 'cont20684C64E88B424BBBBE84921DEDFF77'.I used the log to get more specific info and I got the following:Microsoft SQL Server Snapshot Agent 8.00.760Copyright (c) 2000 Microsoft CorporationMicrosoft SQL Server Replication Agent: MyServer-MyMainDatabase-MyMainDatabase2MyTargetDatabase-4Connecting to Distributor 'MyServer'Connecting to Publisher 'MyServer.MyMainDatabase'Server: DBMS: Microsoft SQL ServerVersion: 08.00.0760user name: dboAPI conformance: 2SQL conformance: 1transaction capable: 2read only: Nidentifier quote char: "non_nullable_columns: 1owner usage: 31 max table name len: 128max column name len: 128need long data len: Ymax columns in table: 1024max columns in index: 16max char literal len: 524288max statement len: 524288max row size: 524288[8/3/2005 4:43:30 PM]MyServer.MyMainDatabase: sp_MSgetversionInitializing the publication 'MyMainDatabase2MyTargetDatabase'*** [Publication:'MyMainDatabase2MyTargetDatabase'] Publication view generation time: 201 (ms) ****** [Publication:'MyMainDatabase2MyTargetDatabase'] Make generation time: 100 (ms) ***Generating schema script for article '[ContactsCategories]'Generating conflict schema script for article '[ContactsCategories]'Generating referential integrity script for article '[ContactsCategories]'Generating trigger script for article '[ContactsCategories]'*** [Article:'ContactsCategories'] Time generating all schema scripts: 1762 (ms) ***Generating schema script for article '[Contacts]'Generating conflict schema script for article '[Contacts]'Generating referential integrity script for article '[Contacts]'Generating trigger script for article '[Contacts]'*** [Article:'Contacts'] Time generating all schema scripts: 1292 (ms) ****** [System table:'MSmerge_contents'] .SCH script generation time: 10 (ms) *** *** [System table:'MSmerge_tombstone'] .SCH script generation time: 20 (ms) *** *** [System table:'MSmerge_genhistory'] .SCH script generation time: 21 (ms) *** *** [System table:'sysmergesubsetfilters'] .SCH script generation time: 30 (ms) *** [8/3/2005 4:43:34 PM]MyServer.MyMainDatabase: select 1 from [dbo].[ContactsCategories] (TABLOCK HOLDLOCK) where 1=2 [8/3/2005 4:43:34 PM]MyServer.MyMainDatabase: select 1 from [dbo].[Contacts] (TABLOCK HOLDLOCK) where 1=2 Bulk copying snapshot data for system table 'MSmerge_contents'select * from cont20684C64E88B424BBBBE84921DEDFF77 where 1 = 2[8/3/2005 4:43:35 PM]MyServer.MyMainDatabase: select * from cont20684C64E88B424BBBBE84921DEDFF77 where 1 = 2SourceTypeId = 4SourceName = MyServerErrorCode = 0ErrorText = ODBCBCP/Driver version mismatchThe process could not bulk copy out of table 'cont20684C64E88B424BBBBE84921DEDFF77'.Disconnecting from Publisher 'MyServer' I have also found in another forum tha this is related with the files sqlsrv32.dll, sqlsrv32.rll and odbcbcp.dll. The versions of these drivers in my server are:sqlsrv32.dll: 85.1025sqlsrv32.rll: 81.9001odbcbcp.dll: 81.9031Is it really the problem in the versions of these files? Anyone knows how to update them and if there any risks by doing it?Thanks in advance...
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient. Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio ------------------------------
I am trying to create a CLR UDF in SQL 2005 and cosnistently run into the following error. What am I doing wrong?. Please correct me and show me the right way of doing this.
Msg 6551, Level 16, State 2, Procedure EmailSplitter, Line 3
CREATE FUNCTION for "EmailSplitter" failed because T-SQL and CLR types for return value do not match.
Here is what I am trying to achieve. Split a Email field in the database. For that I am trying to return an array using C# and then trying to call the UDF for the C#.
--1).CLR Code. (EmailSpitter.cs)
using System; using System.Collections.Generic; using System.Text;
namespace SQLTools { public class EmailSplitter { public static string[] Parse(string data) { string[] columnData; string[] separators = new string[1]; separators[0] = " ";
This has got to be simple... Every time I try to create this sproc I get the following error: Msg 156, Level 15, State 1, Procedure sp_AddTradeItemsToSelections, Line 5 Incorrect syntax near the keyword 'VIEW'. Its driving me nuts because I can't see anything wrong with line 5 where the view is being created. CREATE PROCEDURE [dbo].[sp_XXXXX] @UserdataIDInt, @BuilderIDInt AS CREATE VIEW TradeItem_Append AS SELECT TradeItemID, UserDataID, BuilderID FROM Selections WHERE (UserDataID = @UserdataID) SELECT TradeItem_Append.UserDataID, TradeItems.BuilderID, TradeItems.TradeID, TradeItems.TradeItem, TradeItems.Price, TradeItems.DDLRefNo, TradeItems.TradeItemID, TradeItems.Details, TradeItems.ProductType, TradeItems.Room, TradeItems.Notes FROM TradeItems LEFT OUTER JOIN TradeItem_Append ON TradeItem_Append.TradeItemID = TradeItems.TradeItemID WHERE (TradeItem_Append.TradeItemID IS NULL)AND(TradeItems.BuilderID = @BuilderID) DROP VIEW TradeItem_Append
Hello All im developing web application in VS2005(C#) while Creating SQLDATASource for Gridview im getting Following error cannot get web application service Please help ME Regards Balagangadharan.R
im creating a ecommerce website, and i need to create a database, im using visual studio .net and when i try to create a new database using VS.net i choose "use sql server authentication" and no matter what i type in for the login id, i get the following ado error
"ADO Error : ' Login failed for user "blank". Reason. Not associated with a trusted SQL server connection.'
Hi, When I try to create a CLR function in SQL 2005 (June CTP) I get the following error: Msg 6505, Level 16, State 1, Procedure Extenso, Line 1Could not find Type 'Extenso' in assembly 'ExtensoNET'. The assembly registers successfully, with no errors. I use the following command to create the function:CREATE FUNCTION Extenso (@Valor float)RETURNS VARCHAR(255)AS EXTERNAL NAME ExtensoNET.Extenso.EscreveExtensoGO The function's code is the following: using System;using System.Collections.Generic;using System.Text;using Microsoft.SqlServer.Server;using System.Data.SqlClient; namespace ExtensoNET{ public class Extenso { [SqlFunction(DataAccess = DataAccessKind.Read)] public static string EscreveExtenso(double? nValor) { //Valida Argumento if (nValor==null || nValor <= 0 || nValor > 999999999.99) return ""; //VariƔveis int nTamanho; string cValor, cParte, cFinal; string[] aGrupo = { "", "", "", "", "" }; string[] aTexto = { "", "", "", "", "" }; . . . } return cFinal; } }} Thanks in advance, Anderson
Hi I have a Win2K SP1 server running SQL 7. Whenever I try to create a DTS package, I get a box headed "DTS CoCreateInstance" with "Error in the DLL" as the box text. I have tried removing and re-installing SQL 7 and have also applied SQL SP 1,2 & 3. There are no errors in the event log, just the popup error outlined above.
I don't see what's wrong with this command. >> Create View BCPOutBatchWeightTaiwan AS Select * from batchWeight a JOIN Geography b ON a.GeographyPtr = b.GeographyPtr where b.countrycode = 'tw' << I get the following error if I try to create it. >> Server: Msg 4506, Level 16, State 1, Procedure BCPOutBatchWeightTaiwan, Line 2 Column names in each view must be unique. Column name 'GeographyPTR' in view 'BCPOutBatchWeightTaiwan' is specified more than once. <<
But it runs fine if I run only th 'Select' part of the command without 'CREATE' line.
I am trying to create an assembly on a sql server 2005 machine but it gives me following error:
Msg 33009, Level 16, State 2, Line 2 The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.
I tried using the alter authorization statement to change the owner. It did not work.
I am able to create same assembly on another test database but can not create it on this database.
i want to create table using another table but i am getting the following error.
Server: Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'AS'.
my query is:
CREATE TABLE errorlog AS SELECT * FROM log where 1=0 becos i a trying to copy the structure of the table log to table errorlog.please rectify my problem,please
We upgraded from SQL Server 2000 to 2005 recently. I'm attempting to create a credential for the first time and I keep getting the error shown below. Can anyone tell me what to do to resolve it? Thank You
TITLE: Microsoft SQL Server Management Studio ------------------------------
Create failed for Credential 'schjob'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Credential&LinkId=20476
I am trying to create an assembly on a sql server 2005 machine but it gives me following error:
Msg 33009, Level 16, State 2, Line 2 The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.
I tried using the alter authorization statement to change the owner. It did not work.
The same assembly is created on another test database but can not create it on this database.
I just wondering where can I find the table of my database SuplliersDatabase. I need to know if it is already exists or not? I tried to look around but then still I can't find it.
