Error On Replication Initialization
Jul 24, 2007
Hi,
We had a healthy 2-way merge replication set up with a SQL 2005 publisher/distributor and a SQL 2000 subscriber which had been running for about a week. I re-created the publication so I could add automatic identity range management to an article. I sucessfully re-created a push subscription to a SQL 2005 subscriber but when I tried to create one to the same SQL 2000 machine that had been quite happy a few hours earlier, I kept getting this error during initialization: "bulk data stream was incorrectly specified as sorted". Nothing much has changed as far as I can see. Can anyone give me some pointers?
Thanks,
Pete
View 2 Replies
ADVERTISEMENT
Jul 14, 2015
when have had a problem in the initialization of a Merge replication of 3.600.000 rows on SQL Server 2014.The sp_MSmakegeneration was generating a large number of X locks and the replication process was unable to start.Finally we solved the issue modifying thegeneration_leveling_threshold parameter to 0..But, by knowledge this was a known issue with older SQL Server Version.if is mandatory to set it to 0 due to ininizialize large Relicas?
View 3 Replies
View Related
Feb 13, 2015
I have configured three transactional replication one from DC - Data center & DB for database
DC1-DB1 to DC2-DB1 -- 1
DC2-DB1 to DC2-DB2 --2
DC2-DB2 to -DC2-DB3 --3
Before synching the data on DC2 databases I wanted to truncate / drop the objects on 1 and 2 setup as these are already participating in replication. Setup 1 and 2 are publisher as well as subscriber. I am not able to reinitialize these tables on these setup. I cannot use SSIS.
View 3 Replies
View Related
Apr 21, 2008
During merge replication initialization from SQL Server 2005 to SQL Server CE 3.5 on Windows Mobile 5.0
I am getting the following errors:
On Device
{"The table name is not valid. [ Token line number (if known) = 1,Token line offset (if known) = 21,Table name = COLLECTION ]"}
base {System.SystemException}: {"The table name is not valid. [ Token line number (if known) = 1,Token line offset (if known) = 21,Table name = COLLECTION ]"}
HResult: -2147217900
Message: "The table name is not valid. [ Token line number (if known) = 1,Token line offset (if known) = 21,Table name = COLLECTION ]"
NativeError: 26100
Source: "Microsoft SQL Server Compact"
{System.Data.SqlServerCe.SqlCeError: The SQL statement failed to execute. If this occurred while using merge replication, this is an internal error. If this occurred while using RDA, then the SQL statement is invalid either on the PULL statement or on the SubmitSQL statement. [ SQL statement = ALTER TABLE [dbo].[COLLECTION] ADD CONSTRAINT [PK_COLLECTION] PRIMARY KEY CLUSTERED ( [SERIAL_NUMBER], [STORE_CODE], [COLLECT_DATE] )WITH PAD_INDEX , FILLFACTOR = 90 ]}
Source: "Microsoft SQL Server Compact"
Server Logged:
...
2008/04/20 20:03:16 Thread=EA0 RSCB=5 Command=SCHK Hr=00000000 SyncCheck responding 0
2008/04/20 20:03:17 Thread=B90 RSCB=5 Command=OPNR Hr=00000000 End Of Data Set 1
2008/04/20 20:03:17 Thread=B90 RSCB=5 Command=OPNR Hr=00000000 Responding to Fetch, bytes = 50259
2008/04/20 20:03:17 Thread=970 RSCB=5 Command=CLOS Hr=00000000 Total Compressed bytes out = 50259
2008/04/20 20:03:17 Thread=970 RSCB=5 Command=CLOS Hr=00000000 Total Uncompressed bytes out = 390254
2008/04/20 20:03:17 Thread=970 RSCB=5 Command=CLOS Hr=00000000 Removing this RSCB 0
2008/04/20 20:03:19 Hr=00000000 Compression Level set to 1
2008/04/20 20:03:19 Hr=80004005 ACK:Error for DistributorSessionID = 80
2008/04/20 20:03:19 Hr=80004005 The SQL statement failed to execute. If this occurred while using merge replication, this is an internal error. If this occurred while using RDA, then the SQL statement is invalid either on the PULL statement or on the SubmitSQL statement. [,,,SQL stateme 28560
The same tables in a different on a different SQL box (test) replicate fine, but on this box (production) they do not. Any idea what would be the difference in the two environments?
I suspect that the "dbo." part in the "alter table" is what it is messing up on... how can I tell SQL CE not to include that schema prefix?
Thanks
View 12 Replies
View Related
Jun 27, 2007
I am using transaction replication between a transaction and reporting database server. When I use a snapshot to initialize my subscribers, I currently get a lot of deadlocks during the snapshot creation. I am considering using a database backup instead. Can anyone tells me how to reduce the table locks that I am getting during snapshot creation or advice on using database backups?
View 1 Replies
View Related
May 12, 2015
We have a filtered publisher (SQL Server 2012) with several pull and push subscriptions that have been functioning fine for years.
We have just added a new pull subscriber from a remote server. We configured an alternate folder location on the subscriber (pointing to existing path on a remote server). We generated new snapshot and partitioned snapshot, and moved to subscribing server at alternate path.We're seeing a problem we've never seen before:
When the merge agent runs, it applies the schema and performs a few hundred bulk inserts, but then proceeds to 'download changes to subscriber' as though the snapshot is old (it is brand new and should have all transactions). We have never seen this before, i.e. all data is usually applied in bulk when creating a new or reinitializing an existing subscriber.
we marked the subscriber for re-initialization (from both the publishing and subscribing server) with a fresh set of snapshots. The same problem occurred.We have also tried in our test environment (which mirrors production) and the snapshot applies as expected (via bulk inserts).
(It might be relevant to note the publisher was recently upgraded in-place from 2005 to 2012.)
View 11 Replies
View Related
Apr 14, 2005
Hi all,
Complete newbie to ASP.NET, but you have to learn some time. Anyway, I am attempting to fill a datagrid from the Northwind database installed on my SQL server at work and I receive the following error when I attempt to compile to check the connection.
Format of the initialization string does not conform to specification starting at index 67.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: Format of the initialization string does not conform to specification starting at index 67.Source Error:
Line 31:
Line 32: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Line 33: Dim cnn As New SqlConnection( _
Line 34: "Data source=xxxxx;Initial Catalog=Northwind;User ID=sa;Password=;xxxxxx")
Line 35: End SubSource File: C:InetpubwwwrootApp_02default.aspx.vb Line: 33 Stack Trace:
[ArgumentException: Format of the initialization string does not conform to specification starting at index 67.]
System.Data.Common.DbConnectionOptions.GetKeyValuePair(String connectionString, Int32 currentPosition, StringBuilder buffer, String& keyname, String& keyvalue) +1203
System.Data.Common.DbConnectionOptions.ParseInternal(Hashtable parsetable, String connectionString, Boolean buildChain, Hashtable synonyms, Boolean firstKey) +127
System.Data.Common.DbConnectionOptions..ctor(String connectionString, Hashtable synonyms, Boolean useFirstKeyValuePair) +103
System.Data.SqlClient.SqlConnectionString..ctor(String connectionString) +32
System.Data.SqlClient.SqlConnectionFactory.CreateConnectionOptions(String connectionString, DbConnectionOptions previous) +25
System.Data.ProviderBase.DbConnectionFactory.GetConnectionPoolGroup(String connectionString, DbConnectionPoolOptions poolOptions, DbConnectionOptions& userConnectionOptions) +119
System.Data.ProviderBase.DbConnectionBase.set_ConnectionString(String value) +53
System.Data.SqlClient.SqlConnection.set_ConnectionString(String value) +7
System.Data.SqlClient.SqlConnection..ctor(String connectionString) +23
App_02.WebForm1.Page_Load(Object sender, EventArgs e) in C:InetpubwwwrootApp_02default.aspx.vb:33
System.Web.UI.Control.OnLoad(EventArgs e) +102
System.Web.UI.Control.LoadRecursive() +45
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +952
I have been tearing my hair out trying to work out this error. Can anyone help????
Using VisualStudio.NET 2003 on an XP box and and SQL Server 2000 on a Windows2003 Server box.
Thanks,
Gerald
View 1 Replies
View Related
Feb 23, 2006
I installed the evaluation version of SQL Server 2005 to my Windows XP machine. Everything has worked well. Now I have problem. I installed the reporting service to test the web reporting.
In the Report service configuration manager I get three errors:
The Web Services Identity indicator is red and pushing Apply button gives the error:ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 8007056B
Pushing Initialization button gives the message: There was an error while switching panels. The most likely cause is an error retriewing WMI properties. the exeception details are: An error occured when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running and then try the operation. Execption 800706B3.
Server Status Indicator is also red. Pushing the Start Button gives the following message: System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed. at System.ServiceProcess. ServiceController. WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout) at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
Has anyone an idea what I should do ??
thankfully
Matti
View 27 Replies
View Related
Aug 15, 2007
When opening Visual Studio 2005 and creating a new project my computer sometimes crashes (blue screen).
The System Error with source MSSQL$SQLEXPRESS and description: Fallback certificate initialization failed. Error: 1 (Event-ID: 17190) is found in the programlog.
Do anyone know the source of this error/what is causing it? How can I fix it?
Regards,
Lotta
View 1 Replies
View Related
Feb 11, 2008
It is SQL Server 2005. I am trying to create an SSIS package for OUR database engine with OUR OLE DB provider.
In Server Explorer I am trying to add a data connection for OUR database using OUR own ole db data provider. Procedure below-
1. Right click "Data Connections"
2. Click "Add Connection...", "Change Data Source" dialog is displayed.
3. Select "other" and ".NET Framework Data Provider for OLE DB". Click OK. "Add Connection" dialog is displayed.
4. Select "OLE DB Provider". I selected OUR provider.
5. Edit necessary properties. Click OK.
6. An error dialog is displayed saying "Format of the initialization string does not conform to the OLE DB specification."
I did some tracing. My observations are-
Connection string is built internally as
"Provider=MYOLEDB;Password=password;Data Source=myserver;User ID=admin;Initial Catalog=SYSTEM;Window Handle=984398;Prompt=CompleteRequired"
The last property causes this issue. i.e. presence of 'Prompt=CompleteRequired' is the problem.
I tried this with simple c# test program to connect. If I pass the whole connection string as above to OleDbConnection() it gives the error--
"Format of the initialization string does not conform to the OLE DB specification."
It works fine if I pass connection string removing last property, i.e.
"Provider=MYOLEDB;Password=password;Data Source=myserver;User ID=admin;Initial Catalog=SYSTEM;Window Handle=984398"
So the problem is that the connection string built contains 'Prompt=CompleteRequired' at the end. Our provider returns DBPROMPT_NOPROMPT for DBPROP_INIT_PROMPT property. Still why the connection string is built as 'Prompt=CompleteRequired'?
Probably this is because of missing something in properties/implementation. What is it?
Thanks,
Vivek.
View 4 Replies
View Related
Nov 13, 2005
solution found here:
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I'm using VS2005 + SQL Compact 3.1 and Enterprise Library 3.1 May 2007
I can successfully create a db using pull method, when I try to push back data I got the following SQLCE error:
"Another user has opened the database with different instance-level initialization properties. [ 32 ]"
Before calling the push method I did
SqlCeDatabase eCE = Helper.GetDB() as SqlCeDatabase;
eCE.CloseSharedConnection();
SqlCeConnectionPool.CloseSharedConnections();
SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess();
rda.InternetUrl = webSynchronizationUrl;
rda.InternetLogin = webuser;
rda.InternetPassword = webpass;
rda.LocalConnectionString = eCE.ConnectionStringWithoutCredentials;
but after the assignment the LocalConnectionString is different from ConnectionStringWithoutCredentials, there are much more ssce parameters.
What I don't understand is:
why I'm getting this error even after closing the connection ?
Since the error report [32] the ssce conflicting parameters shoud be AUTO_SHRINK_THRESHOLD, FLUSH_INTERVAL and MAX_DATABASE_SIZE
I tried to cut & paste the same values from LocalConnectionString into app.config connection string, at first It seemed to work, but now I got the same error.
Any help will be greatly appreciated
Thanks
View 3 Replies
View Related
Jan 31, 2007
I've seen other posts on this topic, but not with error 0x32.
I was attempting to change a CLUSTERED instance of SQL 2005 from dynamic port to static port and in the process have somehow messed it up to the point it will no longer start. Version is 9.00.2047.00
The ERRORLOG has the following
2007-01-31 15:02:05.77 spid9s Starting up database 'model'.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1c.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1.
2007-01-31 15:02:05.77 Server Error: 17826, Severity: 18, State: 3.
2007-01-31 15:02:05.77 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-01-31 15:02:05.77 Server Error: 17120, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
The values have only been changed using SQL Server Configuration Manager (no direct registry changes have been made).
Thanks for you help.
View 1 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
Sep 17, 2006
Dear friends
I read about 'NoSync' initialization.I tried out in my system.That time after executing Sp_Scriptpublicationcustomprocs,Stored procedures are propagated to subscriber.Replication was working fine.But afterwards I got some problem.So I reinstall my SQL Server I agin tried 'NoSync' initialization.This time Stored procedure is getting created on Publisher database not in subscriber.Can you tell me what may be the reason
I have two other doubts also
1)Sometimes I am getting error in subscriber.'The process couldn't connect to Distributor'.How to configure distributor in this case?
in configure publishing,distributor wizard I won't able to do anything like that change distributor login or something
2)How to delete Distributor database from a server.once it's get created if wan't also I won't able to delete it
3)If I am using SQL Server 2005 Peer to peer Replication whether it will be reliable for load balancing.My All servers will be in one office only.Or clustering may be better technology for load balancing.if it is like that can you tell me why it is?
Expecting reply
Filson
View 1 Replies
View Related
Apr 11, 2006
Hello,
I have just installed SQL Server 2005 Enterprise Evaluation Edition and everything work except the report server.
I have no problems to configure reporting services but when the configuration is done, the initialization doesn't work.
I have the message :
"There was an internal error
while switching panels. The most likely cause is an error retriewing
WMI properties. the exeception details are: An internal error occured on report server. For more informations, consult the log files (rsInternalError)"
when i search in thr log files, i have different messages (various errors without meaning for me) :
"Microsoft.ReportingServices.Diagnostics.Sku.EnsureCorrectEdition(SqlConnection sqlConn, String connectionString, Boolean checkRestrictedSkus)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectEdition()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()"
ReportingServicesService!library!8!11/04/2006-13:59:33:: Exception caught while starting service. Error: System.Threading.ThreadAbortException: Le thread a été abandonné.
à Microsoft.SqlServer.SqlDumper.Dumper..ctor()
à Microsoft.SqlServer.SqlDumper.DumpClient.GetDumper()
à Microsoft.ReportingServices.Diagnostics.Dumper.DumpHere(Exception optionalException, String assertionMessage)
à Microsoft.ReportingServices.Diagnostics.Utilities.RSException..ctor(ErrorCode errorCode, String localizedMessage, Exception innerException, RSTrace tracer, String additionalTraceMessage)
à Microsoft.ReportingServices.Diagnostics.Utilities.ReportCatalogException..ctor(ErrorCode errorCode, String localizedMessage, Exception innerException, String additionalTraceMessage)
à Microsoft.ReportingServices.Diagnostics.Sku.EnsureCorrectEdition(SqlConnection sqlConn, String connectionString, Boolean checkRestrictedSkus)
à Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectEdition()
à Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
à Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
View 4 Replies
View Related
Feb 26, 2007
I have seen these terms used but don't understand exactly what they are and how they differ. Could I use one without the other or are they a "linked" pair?
TIA,
Barkingdog
View 6 Replies
View Related
Jul 16, 2007
I have been trying to use Instant File Initialization feature on one of the servers which is a part of DMZ. One of the requirement, I understand, for that feature to work is to have SQL Server configured to use NT Authentication. My server is running in Mixed authentication, using local administrator account. I understand I should practice principle of least privilege, but question at hand is how I could use instant file initialization when SQL Server is not using Domain account.
Thanks,
Asaf
View 3 Replies
View Related
Aug 10, 2007
Hi
I am trying to configure reporting services. When I try to connect the portal through browser, it gives following error
"The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError)"..
Any idea, why this error? Also, in reporting services configuration manager, the initialization tab is greyed. I need this to get solved as soon as possible. Please let me know how can I get this thing done.
Regards
Abhinav
View 1 Replies
View Related
Jul 18, 2007
Guys I noticed that the value I set on one of the package variables is not carried over during the execution. I have a package variable of type String which I use to hold the string for a parameter in a stored procedure. My stored procedure has one output parameter which is the id of the record fetched using the string parameter. These are my parameters
1) User::vendorId Int32 Initial value = -1
2) User::vendorName String Initial value = Vendor A
I make the assignment in the Variable pane. Are there any other ways of doing this?
Watching the two variables reveals that only the value for the first variable is carried over during execution. The vendorname is always blank --> {}. I'm using a SQL Task with OLEDBConnection.
What's going on here?
View 8 Replies
View Related
Jun 28, 2006
Greetings all,I have a SQL Server 2005 Database for a product based solution which needs to be initialized with some basic info before it get's shipped along with the product. For example, the default admin password and assigning it to the Administrator role (Membership API). Additionally some other application specific info.My first thought would be to create a command line utility which would be executed just once that reads a text file definining what needs to go where and blow this into an empty database. I discovered the SSEUtil which could be handy but I understand this tool works only with SQL Express.Can someone suggest a strategy for handling this scenario?Thanks in advance!
View 1 Replies
View Related
Feb 14, 2004
I have a web config file with the connection string to my db in it. The same connection string is used throughout my application.
I authenticate users via my own Login page - this page uses the connection string in the web config file, connects to the db and proceeds to log the user on (a record of access is stored within the db). It then redirects to a second page. This page uses the same connection string from the web config file but on the "open" I get the following error:
Error Message: System.InvalidOperationException: The ConnectionString property has not been initialized. at System.Data.SqlClient.SqlConnection.Open()
The dim in the code is always the same:
Dim cnMyConn As New SqlConnection(ConfigurationSettings.AppSettings("connectionString"))
and the open is:
cnMyConn.Open()
This only happens on my hosted site. When I run locally on my test machine the page is displayed fine???? I have connection pooling set on in the remote web config file.
The web config remotely looks like:
<add key="connectionString" value="Server=???;uid=???t;pwd=???;database=unifuturenet; min Pool Size=3; max Pool Size=5;pooling=True;" />
??? set to appropriate values.
within the code, the connection is set by:
Dim cnMyConn As New SqlConnection(ConfigurationSettings.AppSettings("connectionString"))
If anyone has any bright ideas, I would appreciate it. It may be worth mentioning that I am running version 1.0.3705 and I have this in the remote web config file:
- <startup>
<supportedRuntime version="v1.0.3705" />
</startup>
Kind regards,
Rob
View 2 Replies
View Related
Mar 29, 2007
I am installing sql server 2005 reporting services on server running sql server 2005. I get to the reporting services configuration page and configure...
report server virtual directory
report manager virtual directory
windows service identity
web service identity
database setup
encryption keys
when I get to Initialization the button is grey and inactive so I can't initialize reporting
services, Do I need to restart server?
View 1 Replies
View Related
Jul 23, 2007
I guess this may not strictly be a CLR integration question, because what I'm actually doing is using sp_OACreate in a T-SQL batch to call a COM object written in C#. Not as nice as using full CLR integration, but unfortunately the T-SQL must run without error on a SQL 2000 server before it is upgraded to 2005, and I preferred this option to using reams of dynamic SQL.
The first call to sp_OACreate fails with hRes 0x80131022. MSSQLServer also logs the following error to the app event log:
"Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x80131022. You may fix the problem and try again later."
Please can anyone suggest why this is happening? I've tried repairing the .NET framework (v2) installation, and reinstalled SQL Server Express. I've double checked both CLR integration and OLE Automation are allowed in the Surface Area config tool for SQL Express. I've tried running SQL Express using both LocalSystem and the administrator account on the machine. I've even checked there is plenty of free memory (including virtual memory). Nothing has helped though.
Thanks in advance for any help or suggestions you can provide,
Rob
View 5 Replies
View Related
Jan 6, 2015
My 3rd party backup product uses a non-service account login to perform tasks. If the account that it uses has been granted Perform Volume Maintenance tasks on the server, will it use IFI when restoring? Or do I need to have it use the service account login specifically to benefit from that?
View 2 Replies
View Related
Jan 5, 2006
Hi all,
Is it possible to create a trigger after creation of table during reinitialization? if so, how can I do that? Thanks in advance!
View 11 Replies
View Related
Mar 5, 2008
Howdy Folks!
I'd like to put all the properties from the DBPROPSET_SSCE_DBINIT propset into a configuration file (XML probably) such that I can read in and dynamically adjust my SSCE connections. This way stuff like max database size and buffer size can be changed without a recompile.
My idea was to have an XML in the form:
<PropertySet Id = DBPROPSET_SSCE_DBINIT>
<Property Id = DBPROP_SSCE_AUTO_SHRINK_THRESHOLD>
<Options>DBPROPOPTIONS_REQUIRED</Options>
<Type>VT_I4</Type>
<Value>100</Value>
</Property>
<Property Id = DBPROP_SSCE_MAX_DATABASE_SIZE>
<Options>DBPROPOPTIONS_REQUIRED</Options>
<Type>VT_I4</Type>
<Value>1024</Value>
</Property>
.
.
.
</PropertySet>
Now my question is...can y'all think of any better way to convert these strings that I'll retrieve (e.g. "DBPROP_SSCE_MAX_DATABASE_SIZE") to their enum'd equivalents than to do the following:
if(PropertId == L"DBPROP_SSCE_AUTO_SHRINK_THRESHOLD") return DBPROP_SSCE_AUTO_SHRINK_THRESHOLD;
if(PropertId == L"DBPROP_SSCE_MAX_DATABASE_SIZE") return DBPROP_SSCE_MAX_DATABASE_SIZE;
It's seems entirely too unelegant and wasteful...but maybe I'm being too picky. It also has the disadvantage of needing to be updated if more properties are added with subsequent versions.
What do y'all think? Thanks as always!
View 5 Replies
View Related
Feb 5, 2008
In Server Explorer I am trying to add a data connection for OUR database using OUR own ole db data provider. Procedure below-
1. Right click "Data Connections"
2. Click "Add Connection...", "Change Data Source" dialog is displayed.
3. Select "other" and ".NET Framework Data Provider for OLE DB". Click OK. "Add Connection" dialog is displayed.
4. Select "OLE DB Provider". I selected OUR provider.
5. Edit necessary properties. Click OK.
6. An error dialog is displayed saying "Format of the initialization string does not conform to the OLE DB specification."
If I go back to the "Add Connection" dialog(after clicking OK on error) and click "Advanced", I see connection string as--
Provider=OURPROVIDER;Data Source=our_backend;Password=password;User ID=admin;Initial Catalog=mydb
I am not able to find out what/where went wrong. I tried this conneciton string in a c# program, it works perfectly fine.
Can anyone help me on why I am getting this error with our provider in SSIS?
Thanks,
Vivek.
View 3 Replies
View Related
Feb 8, 2005
Hi,
I am working on the guided tour of the ASP.NET WebMatrix tool, and I wanted to perform the section of connecting to a SQL server.
I downloaded SQL2kdesksp3 from the Microsoft website, extracted it, and followed the instructions for installing it:
setup SAPWD=(some password) SecurityMode=SQL
It installs all the way to the end, and I get an error message :
"Setup failed to initialize the server. Please see the setup error logs for more information"
I tried to reinstall it, and even tried downloading it again, and then running it, I get the same message.
Could someone tell me what is going on, or where to find the error logs?
Thanks in advance.
View 8 Replies
View Related
Sep 27, 2007
Hi All!
Microsoft SQL Server 2005 - 9.00.3159.00 (Intel X86)
Mar 23 2007 16:15:11
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
40 subsribers.
Adding new article.
On any aubscribe need regenerate snapshot agent agent.
The tables are very big. With filters.
Regenerating process anew copy data in in ...ReplDataame.bcp, during 30-40 minutes for any subscriber!
Full work to small correct of replication flow during 2-3 days....
Is it possible to initialize subscription without copying bcp data?
View 5 Replies
View Related
Jun 8, 2006
Hi there,
I'm trying to initialize a subscription for a transactional replication between Oracle9i and MS SQL Server 2005.
The snapshot agent runs succesfully, but I get an error when the distribution agent runs to apply the snapshots at the subscriber. I've pastet the job history from the Log File Viewer below.
Message
2006-06-08 09:27:25.516 Applied script 'ADDRESS_8.sch'
2006-06-08 09:27:25.516 Applied script 'ADDRESS_8.idx'
2006-06-08 09:27:25.516 Bulk copying data into table 'ADDRESS'
2006-06-08 09:27:25.641 Agent message code 20037. The process could not bulk copy into table '"ADDRESS"'.
2006-06-08 09:27:25.704 Category:NULL
Source: Microsoft SQL Native Client
Number:
Message: Data conversion failed
2006-06-08 09:27:25.704 Category:NULL
Every column contaning null-values at the table in Oracle9i is allowing null-values at the destination table in the SQL Server.
I'm pretty lost here - does anyone know how to solve this problem?
Best regards,
JB Plum
View 6 Replies
View Related
Apr 18, 2007
can't figure out this error. i think i'm writing something wrong in the connnection string. i'm using SQL Server Express, if that helps. in my config file: <connectionStrings> <add name="OfficialScribblerConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|OfficialScribbler.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings> in my aspx file:Dim DBConnection = New OleDbConnection("OfficialScribblerConnectionString") DBConnection.Open() Dim SQLString As String = "SELECT PostedDate From Entries_tbl ORDER BY PostedDate"
View 5 Replies
View Related
