I have un problem with the mirroring, when I set the IP of the partners, I get an error saying that the server will not exists or it's impossible to join it. I try to make a mirroring without witness between two servers.
request on first :
ALTER DATABASE [panorama2] SET PARTNER = N'TCP://192.168.1.71:5050'
I get :
Msg1418, Niveau16, tat1, Ligne1L'adresse reseau du serveur "TCP://192.168.1.71:5050" est impossible à atteindre ou elle n'existe pas. Verifiez le nom de l'adresse reseau et executez la commande de nouveau.
And it's the same problem with the second server.
I work with the sql server evaluation (I put the parameter T 1400 for). Endpoints are created (I get them with a select on systcp_endpoints) :
Mirroring 65541 1 2 TCP 4 DATABASE_MIRRORING 0 STARTED 0 5050 0 NULL
We are trying to set up Web Synchronization, but we keep getting the error "IIS ws not found on the web server. Please specify a computer name that has IIS installed".
Our Distributor/Publisher are on one box, IIS on aother box. Both boxes are in the same domain (test environment), and both boxes are being logged into with a domain account.
We can get this to work in another similar environment so we don't know why this one isn't working. Is it permission issues?
Error: "no report servers were found on the specified machine"
I get this error when launching the Reporting Services Configuration Manager...I've never seen this error, usually it can talk to my local servername but unfortunately it's not. This is a new test server and the first time I've come across this message after setting up Reporting services on 2 machines sucessfully in the past.
I'm running W2K3 SP1. The MDAC Configuration Checker reports MDAC 2.8 SP2. The only discrepancy is MSADCO.DLL, where the expected version is 2.82.1830.0 and my actual version is 2.82.2651.0 (svr03_sp1_gdr.060301-1546).
The error message I'm getting when I use the ODBC Administrator dialog to set up a new entry is: "The setup routines for the SQL Server ODBC driver could not be found. Please reinstall the driver."
This is followed by a dialog titled: "Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed." The body text of the dialog is "Component not found in the registry."
I have installed sql server 2005 along with reporting services... though i am able to design report using business intelligence studio... i am unable to access the report server.... while trying to start the reporting services configuration manager it says no report server found on the specified machine...Invalid Namespace... the installation is local ...
Due to this problem inspite of designing the entire report i am unable to deploy it on the web..since it is asking for a report server...
I have two instances (Source and Destination) on the same server, i did a full backup of a database on the source server, i did a restore on the destination using the NORECOVERY mode, now the database on the destination as green arrow saying "restoring". From the source database i set up the mirroring, i'm using port 5022 on source and 5023 on destination, everything seems to connect fine but when i start mirroring i get the error message "Database mirroring cannot be enabled because the database is not full recovery error: 1465" but when i look at the property of the db on the source the recovery model shows full as so the destination?
I am trying to configure MOSS and SSRS and when I go to Grant Database Access via Central Admin, I get this error No report servers were found on the specified machine.
I have created the sharepoint integrated databae via Reporting Services Config tool. Any ideas?
When setting up an ODBC connection on a non-sql Server X and choosing from the drop down menu which SQL Server to connect to, I see two identical names for my SQL Server (Y). No matter which one I choose, Im not able to go to the screen after being asked how I want to log in (SQL server authentication)
If I build a ODBC connection from any other desktop, I only see one SQL Server Y, and am able to establish a connection to SQL Server Y, with the same user account and password as when Im on Server X.
Server X has two network cards and is teamed...could that be a possible problem ?
Does anyone know where I can get some good examples of how to set up a linked server to an Oracle data source in SQL 2000? I can't seem to get a link set up to my Oracle database. In particular I am wondering how the communication works between OLEDB to the Oracle Instance and how to trouble shoot issues (for example, would is the Oracle Listener what OLEDB is talking to?) Thanks!!
I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
I have a setup/deployment question regarding SQL Server Encryption.
Internal database encrypts data in 3 different tables. This could execute on any one of 6 different servers. The tables with encrypted data are replicated to another database on different servers (3)
How should the keys/certificates be created so that the data in the replicated database can be decrypted?
In my test scenario so far, I have been unable to have the second database decrypt the data that was encrypted on the first database (currently on the same server).
-- Create Database Master Key CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'p@ssw0rd' GO
-- Create Certificate CREATE CERTIFICATE MyCertificate WITH SUBJECT = 'My Data Encryption Certificate', EXPIRY_DATE = '10/31/2010'; GO
CREATE SYMMETRIC KEY MyKey WITH ALGORITHM = AES_256, IDENTITY_VALUE = 'My Symmetric Key', KEY_SOURCE = 'Unique phrase that will be used to secure the key' ENCRYPTION BY CERTIFICATE MyCertificate; GO
Yes, I know synchronisation to alternate partners is deprecated in SQL2005 but....
In SQL2000 there is a Sync Partners tab in the publication properties dialog that allows you tick a checkbox for each co-publisher to be enabled as an alternate synchronisation partner. What is the equivalent in SQL2005?
I've set up replication in SQL2000 following these instructions http://support.microsoft.com/?kbid=321176 and it works. Now I'm trying to do the same thing in SQL2005 but I can't find a substitute for steps 10 & 11 in the section "Set Up the Alternate Synchronisation Partner". What's the answer?
We have mirroring set up on SQL 2005(SP2) on windows server 2003 servers for 6 production servers to DR servers. It is high performance mode(asynchonous). We are using fully qualified server names with default 5022 port. Prod and DR are using same domain service account.
We had network outage for about 30 minutes last weekend and after that network was restored back to normal. Also few SQL 2000 servers have logshipping and it automatically started syncing up after network was restored. However mirroring didn't start automatically. Partners were in disconnected state and endpoints were stopped. For one database, log grew to 40 GB using most of the disk space.
Then we maually had to run
ALTER ENDPOINT Mirroring STATE = STARTED
and then it started syncing up.
Now the question is why it doesn't start syncing up automatically after network is back to normal and recognize the partner? Is there anyway we can setup timeout or any parameter like that to specify how many times or how long partners try to connect with no luck and then give up?
We've been running a mirrored database (using certificates since we don't have a domain) and it's all working well. Last week we decided to add a witness for automatic failovers, but for some reason I just can not get the witness to connect to the Partner2 server.
See screenshot here
Please help me troubleshoot this - I re-created the endpoints / users / certificates but it's still not working. Where can I get more information on what exactly the problem is? Can I test the endpoints somehow?
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
Hi. I am stuck with error: An error occurred while receiving data: '64(error not found)'. My Service Broker configuration: Server A initiator, Server B target. Server A sends message to Server B, Server B sends back reply. On this stage I receive problem. Server B message does not come to server A. It stays on sys.transmission_queue on server B. This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B. So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™. But, whenever I send messages after that, everything works fine.
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is: An error occurred while receiving data: '10054(error not found)'.
And on the other side its Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
heres my code behind in UploadImage.aspx.vb _____________________________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationImports System.IOPartial Class UploadImage Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Insert into TImage (CategoryName,Picture,MimeType) VALUES (@name,@pic,@type)", conn) 'gi convert and image to byte array Dim data(FileUpload1.PostedFile.ContentLength - 1) As Byte FileUpload1.PostedFile.InputStream.Read(data, 0, FileUpload1.PostedFile.ContentLength) comm.Parameters.Add("name", System.Data.SqlDbType.Text) comm.Parameters("name").Value = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName).ToLower comm.Parameters.Add("pic", System.Data.SqlDbType.Image) comm.Parameters("pic").Value = data comm.Parameters.Add("type", System.Data.SqlDbType.NChar) comm.Parameters("type").Value = FileUpload1.PostedFile.ContentType If FileUpload1.HasFile = True Then Try conn.Open() comm.ExecuteScalar() Label1.Text = "Successfully uploaded" conn.Close() Finally End Try End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load End Sub Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click Server.Transfer("image.aspx") End SubEnd Class______________________________________________________________________________________________________________________________then here my code behind in Image.aspx.vb________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationPartial Class image Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String Dim reader As SqlDataReader Dim dataBuffer() As Byte connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Select * from TImage where no = @no", conn) comm.Parameters.Add("no", System.Data.SqlDbType.Int) comm.Parameters("no").Value = 5 conn.Open() reader = comm.ExecuteReader reader.Read() Response.Clear() Response.AddHeader("Content-type", reader("CategoryName")) Response.AddHeader("Content-type", reader("MimeType")) Dim blen As Integer = CType(reader("picture"), Byte()).Length dataBuffer = reader("Picture") Response.OutputStream.Write(dataBuffer, 0, blen) Response.Close() conn.Close() End SubEnd Class_____________________________________________________________________________________________________________________ When I am going to call the Image.aspx it always prompt this error:XML Parsing Error: no element foundLocation: http://localhost:4730/tesdaweb/UploadImage.aspxLine Number 1, Column 1:Is there something wrong in my codes... Please helpthanks...
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
we have a active/passive cluster server with SQL server 2005 SP2 installed. i have found the following error messages in event viewer application log for MSSQLServer:
1) [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed. 2) [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]TCP Provider: An existing connection was forcibly closed by the remote host. 3) [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]Communication link failure 4) [sqsrvres] OnlineThread: QP is not online.
can any one pls help me finding out the solutions. Thanks in Adv, Praneetha.:)
when i try to execute the package i keep getting an error like below even though all the connections in the connection manager is working fine.. how can I resolve thsi problem?
Error: 0xC001000E at : The connection "{616CB160-84E6-4A65-B362-4F2B1D1767F9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error: 0xC001000E at : The connection "{B593900A-434B-4A7A-9AF1-CC248A22D106}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error: 0xC001000E at : The connection "{616CB160-84E6-4A65-B362-4F2B1D1767F9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
when i try to make backup in location different sql server express 's default location for making backup device it tackes an error
TITLE: Microsoft SQL Server Management Studio Express ------------------------------
Backup failed for Server 'PDSTUDIOSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
System.Data.SqlClient.SqlError: Cannot open backup device 'SQLEXPRESS2005(D:My DocumentsVisual Studio 2005DataBasesBackupSQLEXPRESS2005.bak)'. Operating system error 5(error not found). (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------ And this is my code for making backup
USE master GO
EXEC master.dbo.sp_addumpdevice @devtype = N'disk', @logicalname = N'SQLEXPRESS2005', @physicalname = N'D:My DocumentsVisual Studio 2005DataBasesBackupSQLEXPRESS2005.bak' GO Server : SQL Server 2005 Express Edition
lately I had the following message on win2000 sp4 with sqlserver2000 sp3a: "DTS Designer Error - Specified file not found". Then in the DTS editor the Task menu objects are missing and it is not possible to link a source and a target using Transform Data Task.
Before it used to work fine.
I have done the following:
- installing again last sp: same issue again - reinstalling sqserver with a registry deep cleaning: same issue again - started disabled windows services: same issue again
any idea?
Carsten
edit: Could it be possible that a lately installed fix for Win2K interferes with DTS-Designer?
Does anyone know what this error means and how to resolve it? I get this error when I attempt to run a Data Flow Task. The Data Flow Task has one subcomponent, a Flat File Source. I have set up the connection manager to access the flat file, which is on a local directory. I have tried everything to fix this. What could possibly be the problem??
Thanks
Error: 0xC001000E at : The connection "{B9E11DD7-21A1-4FD7-986F-6BDC5B81F51D}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
as Christopher Yager say in "Need distributed service broker sample", I also test sending messages between two SQL Server 2005 instances,and after I setup the test environment with instance1 and instance2,I find queue [q2] in ssb2 can't receive message from ssb1. when I query by "select * from sys.transmission_queue",I get some message records that transmission_status is "64(error not found)".
