I keep receiving errors while using variables to pass values to different part of my package. For example ...
Error: 2006-05-04 10:31:59.84
Code: 0xC00470EA
Source: EdwPostProcess
Description: Reading the variable "User::GvPathRoot" failed with error code 0xC0010009.
End Error
The way my variables are constructed is :
First the global variables (Gv*) are set by the parent package;
Then local variables (Lv*) are set using the EvaluateAsExpression property and giving it an expression that takes the Gv* variable and concatenate a string to it.
At execution time, while the expressions are resolved, I get the above error while it was resolved correctly in a previous task.
I tried different method including duplicating my variables but without success. I'm running out of ideas
In the funtcion below I am selecting a value from the page - Request.QueryString("ProjectID") and this is being pulled through correctly - if I debug then ProjectID = Request.QueryString ("ProjectID") does equal the correct value. However this value is not then working in the following line: strSQL = "SELECT [ProjectID] FROM [Projects] WHERE [ProjectID] = [ProjectID]" This statement is not reading any value for ProjectID and so is selecting all from the table..... How do I write this statement to pick up the variable above????? Thanks in advance for your help! Clare
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim ds As New Data.DataSet Dim da As Data.SqlClient.SqlDataAdapter Dim strSQL As String Dim ProjectID As Int32 ProjectID = Request.QueryString("ProjectID") strSQL = "SELECT [ProjectID] FROM [Projects] WHERE [ProjectID] = [ProjectID]" Dim connString As String = "Data Source=xxx;Initial Catalog=xxx;User ID=xxx;Password=xxx" da = New Data.SqlClient.SqlDataAdapter(strSQL, connString) da.Fill(ds) ds.Tables(0).Columns.Add("imgFile")
For Each tempRow As Data.DataRow In ds.Tables(0).Rows tempRow.Item("imgFile") = ("imgGrab2.aspx?id=" & tempRow.Item("ProjectID")) Next ImgGrid3.DataSource = ds ImgGrid3.DataBind()
It looks like its not possible to both read and write the same variable from a script using the conventional Me.Variables.<variable> syntax.
I can only assign a variable as Readonly or ReadWrite and not both. If I assign it ReadOnly I can only access it in the PreExecute subroutine. If I assign it ReadWrite I can only access it in the PostExecute subroutine (in fact doesn't this just make it WriteOnly in fact?). So I can only either read in or read out a variable using this syntax, noth both. Is this right?
So the read and write a variable to a script, the VariableDispenser approach is the only option to use. Is this right? and is it documented somewhere that this is how to use variables in scripts. Thanks.
Hello, I am struggling with this, having read many msdn articles and posts I am non the wiser. I have a sproc with an output parameter @regemail. I can call the sproc OK from my code as below, via a tableadapter. And the sproc works as desired from management studio express. I want to get the result returned in the OUTPUT parameter (NOT the Return Value) and place it in a variable. Can anyone advise how I can do this? J. THE CODE I USE TO CALL THE SPROC Dim tableAdapter As New DataSet1TableAdapters.RegistrationTableAdaptertableAdapter.SPVerifyUser(strRegGuid, String.Empty) THE STORED PROCEDURECREATE Proc [prs_VerifyUser @regid uniqueidentifier,@regemail nvarchar(250) OUTPUT ASBEGIN IF EXISTS(SELECT RegEmail from dbo.Registration WHERE RegID = @regid) BEGIN SELECT @regemail = RegEmail FROM Registration WHERE RegID = @regid Return 1 END Return 2 END
While pulling data from a progress 10.1B Database, we get the following error (datasource). How do we go about redirectign the erroneous row into a flat file / database so that we can isolate the issue? [DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I have a report that is based on a query that is read from a .sql file and is executed in the stored procedure. I found this code on the internet. When I run the SP in Query Analyser it tells me that "2 rows have been affected". I don't know why I don't get the data. Any help??
AS DECLARE @SQLQuery as NVARCHAR(4000) BEGIN CREATE TABLE #tmpQuery (Query NVARCHAR(4000)) BULK INSERT #tmpQuery FROM '\servernameQueriesReport_ClientNumbers.sql' SELECT @SQLQuery = Query FROM #TMPQUERY EXECUTE sp_executesql @SQLQuery END GO
and Report_ClientNumbers.sql contains the following query:
SELECT Name, ClientNumber FROM Companies WHERE Not ClientNumber IS NULL ORDER BY ClientNumber
I am using SQL Server 2000, VS 2003 I have Education table in which there is a field CGPA having float data type (null allowed) I retreive the data from SQL server using stroed proc and store it in SqlDataReader dr while reading if CGPA contains 0 then it raises an error that "Specified cast is not valid" other wise it does not raise any error. while (dr.Read()){ Education e = new Education(); e.EducationId = dr.GetInt32(0); e.Country = dr.GetInt32(1); e.InstitutionName = dr.GetString(2); e.Grade = dr.GetString(3); e.CGPA = dr.GetFloat(4); // ERROR HERE e.Percentage = dr.GetFloat(5); e.PassingYear = dr.GetString(6);} where as in Education CGPA is also the float property can any one tell me how to read 0 value of float from SQL server
I added a field to an exisiting table (CHAR 30), and I added to field to the BCP Format File. The BCP worked fine before the new field, and still works fine when I exclude the new field from the format file, but with the new field I receive the following error:
SQLState = S1000, NativeError = 0 Error = [Microsoft][ODBC SQL Server Driver]I/O error while reading BCP format file
I had a problem today where BCP would not read the format file I created giving the following error:
I/O error while reading BCP format file.
I searched the archives here at swynk.com and found a thread titled exactly the same as the one I am now creating. There were numerous responses to this thread but none of them seemed to solve the problem for me (short of the one that suggested using BCP to create the format file, which I didn't want to do).
I used BCP to create a format file for me (which looked identical to the format file that I created) and it worked fine. With my suspicions aroused, I used a binary file viewer to look at the contents of each file and highlight the differences. Apart from the usual variations in whitespace I noticed that the my file did not have any carriage returnline feed at the end of the last row definition.
My format file ended at the end of the last row definition line. It did not have any carriage returns and line feeds. I matched the one generated by BCP and added the following "
" to the end of the file, tested my format file and it worked perfectly.
The moral of the story is, make sure when you create a format file, you have an empty line at the end of the file (ie: after your last "Server Column Name", make sure you have "
I'm trying to pull certain Filemaker 5 tables into SQL Server 2000 inan automated import job using a file DSN. Everything resides locallyon a Windows XP machine. My process works fine on a test FM file withno password, but with the real FM files, all password protected, itfails with this error:******Error Source: Microsoft OLE DB Provider for ODBC DriversError Description: Unspecified error[FileMaker][ODBC FileMaker Pro driver]An error has occurred whiletrying to gather a list of available tables.[FileMaker][ODBC FileMaker Pro driver][FileMaker Pro]Connect failed.Context: Error calling GetRowSet to get DBSCHEMA_TABLES schema info.Your provider does not support all the schema rowsets required by DTS.******This happens whether or not I supply a password to the SQL Server job.It has been nagging me for days and I can't find any documentation onit. Has anyone else encountered this?Thanks very much.Scott
It appears that the VFPOLEDB driver tries to convert numeric types in VFP to decimal types in .NET. In this case, it's a Numeric 9,3 in VFP and it's trying to put it into a decimal 8,3 in .NET.
I know that VFP has this funny quirk where if you don't use all of the decimal places after the decimal point, it allows you to use extras in front of the decimal point. In our case, the number is 104895.83 and yes, VFP is happy storing this in a Numeric 9,3 column.
When trying to read this in .NET, you get this message:
System.InvalidOperationException
The provider could not determine the decimal value. blah, blah, blah...
The question then is - is there a work-around? I can find no way to force .NET to use greater precision. About all I can come up with is to catch the exception and return a nice error message asking the user to make the column larger in VFP.
Here's the .NET code, thanks in advance
Mike
string sqlString = "SELECT * FROM " + Path.GetFileName(dbfFullPath);
OleDbConnection oleConn = new OleDbConnection("Provider=VFPOLEDB.1;Data Source=" +
folderName + ";Collating Sequence=MACHINE;");
OleDbCommand oleCmd = new OleDbCommand(sqlString, oleConn);
I am trying to fill a Textbox with the Label-Field from the Report Parameters. The Multi-Value-Option is checked and it is possible to select multi-values from the time hierarchy [Time].[Year - Half Year - Quarter - Month].
For example you can choose: "Calendar 2007" ([Time].[Year - Half Year - Quarter - Month].[Year].&[2007-01-01T00:00:00]) "Quarter 4, 2006" ([Time].[Year - Half Year - Quarter - Month].[Quarter].&[2006-10-01T00:00:00]) and "April 2006" ([Time].[Year - Half Year - Quarter - Month].[Month].&[2006-04-01T00:00:00])
Now I want to fill a Textbox with the chosen parameter values by putting following expression as value of the textbox:
Parameters!TimeYearHalfYearQuarterMonthDate.Label ... with "TimeYearHalfYearQuarterMonthDate" as the name of the DataSet.
Can anyone tell me what the heck this is trying to tell me. I have 3 datasets I'm working with so there are errors for each here:
[rsMissingFieldInDataSet] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. The data extension returned an error during reading the field.
I am facing this error in SQL server error logs on my activepassive Cluster set around 10-20 times per day.
Edition : SQLserver2008R2 Enterprise edition SQL SP: SP1 Windows : 2008R2 Enterprise windows
2012-07-30 04:44:15.560 A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 10054, output error: 0).
I'm getting the following error from a few hosts that are querying a db in SQL Server 2005. The error has occurred while executing various queries that we would expect to return various sized result sets (from a couple rows to a couple million rows). Many hosts have never experienced the error but it is occurring fairly frequently on a couple.
using Windows Server 2003 on both the jdbc client and the DB host.
using jdbc driver from sqljdbc_1.1
netstat doesnt increment the TCP connection reset count after this error occurs.
using standard sql server authentication.
-----------------------------------------
com.microsoft.sqlserver.jdbc.SQLServerException: A DBComms.error occurred while reading input. Context:Read packet header, Unexpected end of stream, readBytes:-1. Negative read result PktNumber:0. ReadThisPacket:0. PktDataSize:4,096.
hello I have a problem with Sql task when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue." I'm using ODBC connexion for a csv file
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
I'm trying to set up a simple package that can be run after other packages to move packagelog files to another folder(I'm doing this because it doesn't look like we can overwrite a package log file and I really don't want to have to manually keep these in check). Anyway, I've got a source variable and a destination variable. I'm using an expression to build these values in the File System Task. When I run the package I get this error :
Error: 0xC0014054 at CopyPackageLog: Failed to lock variable "C:TempMyPackageLog.xml" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created."
It looks like the variables are getting loaded with the correct path names. Any suggestions?
I am getting a strange error when trying to set a variable from a Execute SQL task. The error I get is below:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "MpxBeginOrderNbr": "The type of the value being assigned to variable "User::MpxBeginOrderNbr" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
The variable MpxBeginOrderNbr is DataType Int32
The sql statement I am executing is:
SELECT MIN(OrderNbr) AS MpxBeginOrderNbr FROM dbo.vCrmOrderHeader WHERE OrderDate > DATEADD(MONTH, -?, GETDATE())
OrderNbr in the View vCrmOrderHeader is datatype BIGINT. I have tried changing the MpxBeginOrderNbr variable to Int64 but I get the same error message. In my test data the result set returns the number 1 which is the first order. Is this a bug in SSIS or am I missing something?
I'm creating a table variable, then executing it in an EXEC statement, like this:
DECLARE @temp_table TABLE ( column1 INT, column2 INT ) SET @strInsert = 'INSERT INTO @temp_table (column1,column2) VALUES ('+@intValue1+','+@intValue2+')' EXEC (@strInsert)
I get a message during the EXEC statement that I must declare @temp_table. When I do this using an actual temporary table (i.e. #temp_table) instead, it works fine. Is there a way around this so I can use the variable instead of the table?
I have the following SP, which gives out a "Error 137: Must declare variable @tmp_return_tbl" error.
This is the important part of the code: . . . -- DECLARE TABLE VARIABLE DECLARE @tmp_return_tbl TABLE (tID int, Text_Title nvarchar(30), Text_Body nvarchar(100))
-- fill out table variable USING A SELECT FROM ANOTHER TABLE VARIABLE -- NO PROBLEM HERE INSERT INTO @tmp_return_tbl SELECT TOP 1 * FROM @tmp_tbl ORDER BY NEWID()
-- TRYING TO UPDATE A TABLE UPDATE xTable SET xTable.fieldY = xTable.fieldY + 1 WHERE xTable.tID = @tmp_return_tbl.tID --THIS PRODUCES THE ERROR . . .
I know I cannot use a table variable in a JOIN without using an Alias, or use it directly in dynamic SQL (different scope) - but is this the problem here? What am I doing wrong?
I have a package with variable "A" defined at the package level, type "string".
I subsequently reference variable "A" in a script task, as a ReadWrite variable. In the script, I simply assign the value of another string variable to variable "A".
However, when I run the package, I *intermittently* receive the error below. Not every time though, sometimes it runs fine without the error. What's going on here?
Thanks
Error msg:
The type of the value being assigned to variable differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
I’m having trouble with a datalist. The default view is the Item Template which has an Edit button. When I click the Edit button, I run the following code (for the EditCommand of the Datalist):
It errors out with the message “Must declare variable @ID�.
I’ve used this process on other pages without problem.
The primary key for the recordsource that populates this datalist is a field named “AutoID�. There is another field named ID that ties these records to a master table. The list of rows returned in the datalist is based off the ID field matching a value in a dropdown list on the page (outside of the datalist). So my SQLdatasource has a parameter to match the ID field to @ID. For some reason, it's not finding it and I cannot determine why. I haven't had this issue on other pages.
Here’s my markup of the SQLDataSource and the Datalist/Edit Template:
All I want to do is run the sql server script located at http://www.data-miners.com/sql_companion.htm#downloads.
This creates some tables and uploads a series of text files into them.
When I run the script through SQL Server Express 2005 I get the error Must declare the scalar variable "@DATADIR". I suspect it's something with me putting in the wrong path.
The text files that the script needs to load into the table are located on the K drive, and I have changed the path in
declare @DATADIR varchar(128) set @DATADIR='C:gordonookdatafinal extfiles'
to
declare @DATADIR varchar(128) set @DATADIR='k: extfiles'
I suspect this is the wrong syntax that's why it's not working but I might be totally wrong.
The text file and the server are both saved on the k drive.
In the code below I get an Internal SQL Server error in QueryAnalyzer. Ultimately I want to get thos code working in a function.DECLARE @WeekNumber tinyintDECLARE @Comp decimal(18,2)DECLARE @PeriodFromDate datetimeDECLARE @PeriodToDate datetimeSET @WeekNumber = 27SET @PeriodFromDate = (SELECT MIN(StartDate) AS StartDate FROMCalendar WHERE WeekNumber = @WeekNumber)SET @PeriodToDate = (SELECT MAX(EndDate) AS StartDate FROM CalendarWHERE WeekNumber = @WeekNumber)SET @Comp = (SELECT SUM(ActualGrossComp)FROM dbo.fnc_ProgramLineUp_1_2()WHERE Delay > 0AND ClearanceCode <> 3AND TeleCastDate BETWEEN @PeriodFromDate AND PeriodToDate)But this code runs fine:DECLARE @WeekNumber tinyintDECLARE @Comp decimal(18,2)DECLARE @PeriodFromDate datetimeDECLARE @PeriodToDate datetimeSET @WeekNumber = 27SET @PeriodFromDate = (SELECT MIN(StartDate) AS StartDate FROMCalendar WHERE WeekNumber = @WeekNumber)SET @PeriodToDate = (SELECT MAX(EndDate) AS StartDate FROM CalendarWHERE WeekNumber = @WeekNumber)SELECT SUM(ActualGrossComp)FROM dbo.fnc_ProgramLineUp_1_2()WHERE Delay > 0AND ClearanceCode <> 3AND TeleCastDate BETWEEN @PeriodFromDate AND PeriodToDateThe only difference is that here I'm not setting @Comp to the returnvalue of the SELECT. This code also runs fine when I sum othercolumns. Any ideas?
I am trying to capture an error message and email to myself whenever the script has an error. I have an email task event handler on OnError and use the variable errormsg as my email body. I have the errormsg variable with a package wide scope defined as string with a value of @[System::ErrorDescription]. Is there anything elso I need to do to make this work?