Error Restoring Database
Jul 25, 2007
When attempting to restore a database, I get the following error:
'Cannot open backup device, (filename).bak, Operating system error 5, access is denied.'
I get similar errors when attempting to attach the database file, it shows up in the Mngt. Tool as 'read only'.
This error does not occur when restoring the same .bak file to other pc's. On the problem pc, we have completely uninstalled and reinstalled Sql Express and Mngt. Tool Express. It occurs whether logged in as full administrator or other user.
View 7 Replies
ADVERTISEMENT
Aug 24, 2006
Hello,
I am taking the error message which is in the below side,while restoring a database.(I am using sql server 2005)
The backup set holds a backup of a database other than the existing 'db1' database. (db1 is the database name.)
Can you help me?
View 1 Replies
View Related
Nov 3, 2007
Hi,
I have one backup file of one database, I want to restore the database to server using that backup file. But when I tried to restore the database using that backup file, the query executed successfully, but in management studio at the database it is showing the message like 'Restoring the database'. The database i am trying to restore is about 2.71gb memory. I executed the query 4hrs back but still it is showing same message that it is getting restored. Why it is showing like this. Please help me to solve this problem.
The query i used to restore the database is -
'RESTORE DATABASE [Everydayonline]
FROM DISK = N'D:BOOKSEverydayBackUp'
WITH
NORECOVERY,
NOUNLOAD,
STATS = 10,
MOVE 'ASPNETDB_983ed943e1fe49e3ae7fa189b823b238_DAT' TO 'D:SQLEverydayOnline.mdf',
MOVE 'ASPNETDB_TMP_log' TO 'D:SQLEverydayOnline_log.ldf'
GO'
View 7 Replies
View Related
Nov 16, 2007
I did the full backup of .7 TB database about 2 weeks ago and did full restore with norecovery mode and then i did differential backup of about 100 gb and tried to restore but it is showing following error :
System.Data.SqlClient.SqlError: This differential backup cannot be restored because the database has not been restored to the correct earlier state. (Microsoft.SqlServer.Smo)
While restoring the files are different than original database files
Please help
View 2 Replies
View Related
Aug 7, 2007
Please that anybody help me.
I have a phisical device called 'respaldo.bak' inside this file there are three backups of three different databases, The first one is database called 'innovasoft' the second one is 'modelo_de_datos' and the last one is 'Inversiones'.
If I perform a restore of the first one there is no problem, but, when i try to restore the second o third database i get the following error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'COMPUTO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
El archivo lógico 'INNOVASOFT_Datos' no es parte de la base de datos 'PROBANDO'. Use RESTORE FILELISTONLY para enumerar los nombres de los archivos lógicos.
Fin anómalo de RESTORE DATABASE. (Microsoft SQL Server, Error: 3234)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3234&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have to say that i want to restore the database with a different name that's why in the error says 'PROBANDO' , i'm really concern about this problem because it means that i have no backups for my data. I used to use this procedure on sql server 2000 every single day without problems, but on sql server 2005 it doesn't work properly.
Please help me.
Thanks in advance.
View 8 Replies
View Related
Jul 9, 2001
Hi all.
I was just restoring one database and creating another concurrently on the same server. The restore took longer than the create due to the respective sizes.
After the create had finished (done in Query Analyzer) I went back to the restore to see how it was getting on (running in Enterprise Manager).
There was an error (which I didn't record exactly - DOH!) along the lines of "could not obtain a lock on the model database, restore terminating abnormally."
I guess the create had model locked while it was creating the default objects, but what was a *restore* doing needing the model database anyway?
Any comments would be interesting.
Andy Tynan
View 1 Replies
View Related
Nov 20, 2004
I m a student and i m doing a project on Datamining. I have to mine data of a company. the issue is that the company uses Microsoft SQL server as there DBMS. they backed up there data and gave it to me with schema (schema is separate and data backup is a backup generated through the backup option in SQL server Enterprise Manager). Now i created tables through query analyzer (i think) and then through enterprise manager i tried to restore that backup on my personal pc and i get an error .
the image is attached
see the image for the error
http://img.photobucket.com/albums/v54/kaboomagic/error.jpg
View 7 Replies
View Related
Mar 17, 2008
Hi experts!
I am using SQL Server 2005. while restoring a database. I got following error:
"
An exception occured while executing a Transct-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
Additional Information:
Too many backup devices specified for backup or restore; only 64 are allowed.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error:3205 )
"
Please guide me to resolve this problem.
Thanks
View 6 Replies
View Related
Jul 13, 2007
I am receiving the following error message when I am trying to restore a database in SQL Express 2005. Has anyone ever seen it before?
microsoft.sqlserver.express.connectionInfo
View 2 Replies
View Related
Sep 10, 2007
I backup a database at the begining of each month with a full and then do nightly diffs on it.
For the same database I run daily fulls and 10 minute log backups.
these two backups create / append to two different backup files.
The problem im having is that I cant restore the Differential backup set. SQL seems to restore the full just fine but alwasy throws an error when its about to start to retore the last diff. now forgive me but I clicked OK on the message and I cant find any record of the error in the logs but its something like:
"SQL cannot restore the database as the database has not been restored to the previous correct state"
is my 10 min TS log backups screwing up the DIff chain somehow?
this is really doing my head in. any help appreciated.
"A computer once beat me at chess - but it was no match for me at kick boxing" - Emo Phillips.
View 1 Replies
View Related
Jan 9, 2007
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
View 3 Replies
View Related
Sep 3, 2014
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 6 Replies
View Related
Aug 6, 2015
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
View 5 Replies
View Related
Dec 1, 2006
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
View 7 Replies
View Related
Jan 18, 2007
Hello,
I think I am getting a similar problem to a previous post, I get this message when restoring a SQL 2005 DB.
Msg 3132, Level 16, State 1, Line 1
The media set has 2 media families but only 1 are provided. All members must be provided.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
It was backed up using whatever tool is in the full version of Server 2005. I only have the express edition and to restore I have run the filelistonly to find the logical file name. I then run a query like:
restore database new name from disk ='file location and name'
with move
'logical file name for mdf' to 'new location',
move 'logical file for ldf' to 'new location'
I have done this many times before with both 2000 and 2005, although the backup is usually done on command backup database 'database name' to disk ='location and name'.
Please help!
Cheers
Matt
View 4 Replies
View Related
Aug 14, 2000
I need to move a database from one server to a new server. Right now, I only have database file on CD which is generated using the backup feature of MS SQL server.
What I did was I copied the file from CD to the harddisk of the new server.
Then I used the restore database, restore from disk, where I specified the location of the backup database file. When I began to restore, the error message I got was:
The file 'e:MSSQL7dataGTCSQL_data.mdf cannot be used by RESTORE. Consider using the WITH MOVE option to identify a valid location for the file. Backup or restore operation terminating abnormally.
The error message in the error.log of SQL server is:
BackupFileDesc::VerifyCreatability: Operating system error 3(The system cannot find the path specified.) during the creation/opening of physical device e:MSSQL7DATAGTCIntranetSQL_dat.mdf.
What did I do wrong? How to use the WITH MOVE option? This is the first time I use MS SQL server. So please give me detailed instruction if posible.
Any suggestion are greatly appreciated.
Sheila
View 4 Replies
View Related
Aug 20, 1998
Hi !!
I have this problem when I dumped 10 tables to a new-created-dump device.
I dropped the tables and recreated it with the same layout as before.
When i try to load the tables again eith the command "load table from dumdevice" the first table works fine but the second table gets the error message:
"Schema differs between source table......."
Where the source table according to the eroor message is the first table that
I sucessfully loaded though I didn`t mentioned it in the command.
What can I do, Am I not allowed to dump several tables to the same dumpdevice !!!
Please Help
Pederico
View 3 Replies
View Related
Feb 21, 2008
Hello
I am trying to restore a file from a file/filegroup backup from our live server to a test machine but keep getting the following error:
The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
The location of the files on the live server are different to where they will be on the test machine but from my understanding of the restore t-sql i thought it the move would locate them to where they should be? here is my restore command i am running:
RESTORE DATABASE TestDB
FILE = 'File1'
,file ='File2'
,file ='File3'
,file ='File4'
,file ='File5'
,file ='File6'
FROM disk = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupFileGroup.bak'
WITH norecovery,
MOVE 'File1' TO 'C:sqlarchivesFile1.ndf' ,
MOVE 'File2' TO 'C:sqlarchivesFile2.ndf' ,
MOVE 'File3' TO 'C:sqlarchivesFile3.ndf' ,
MOVE 'File4' TO 'C:sqlarchivesFile4.ndf' ,
MOVE 'File5' TO 'C:sqlarchivesFile5.ndf' ,
MOVE 'File6' TO 'C:sqlarchivesFile6.ndf',
I can not find any info about this error i am getting, can anyone point me in the direction of where to try and troubleshoot this message please?
Thanks
View 1 Replies
View Related
Feb 1, 2008
hello,
I need to archive a database and restore it on the same server but under a different databasename.
I first backup the database using SMO, now i want to restore it with the code below:
[code]
Private Sub RestoreDataBase(ByVal BackupFilePath As String, ByVal destinationDatabaseName As String, ByVal DatabaseFolder As String, ByVal DatabaseFileName As String, ByVal DatabaseLogFileName As String)
Dim myServer As New Server(My.Settings.SQLServer)
Dim myRestore As New Restore()
myRestore.Database = destinationDatabaseName
Dim currentDb As Database = myServer.Databases(destinationDatabaseName)
If currentDb IsNot Nothing Then
myServer.KillAllProcesses(destinationDatabaseName)
End If
myRestore.Devices.AddDevice(BackupFilePath, DeviceType.File)
Dim DataFileLocation As String = DatabaseFolder + "" + destinationDatabaseName + ".mdf"
Dim LogFileLocation As String = DatabaseFolder + "" + destinationDatabaseName + "_log.ldf"
myRestore.RelocateFiles.Add(New RelocateFile(DatabaseFileName, DataFileLocation))
myRestore.RelocateFiles.Add(New RelocateFile(DatabaseLogFileName, LogFileLocation))
myRestore.ReplaceDatabase = True
myRestore.PercentCompleteNotification = 7
AddHandler myRestore.PercentComplete, AddressOf PercentReturn
Try
myRestore.SqlRestore(myServer)
currentDb = myServer.Databases(destinationDatabaseName)
currentDb.SetOnline()
Catch ex As Exception
If ex.InnerException IsNot Nothing Then
MessageBox.Show(ex.Message & vbCrLf & ex.InnerException.Message, "Ex + InnerEx", MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
MessageBox.Show(ex.Message, "Ex", MessageBoxButtons.OK, MessageBoxIcon.Error)
End If
End Try
End Sub
[/code]
When the program reaches the red line, he throws the following error:
Restore failed for Server 'NB_DELL_JWOSQLEXPRESS'.
System.Data.SqlClient.SqlError: Logical file 'TMP_MIXix_20080129.' is not part of database 'TMP_MIXix_20080129.'. Use RESTORE FILELISTONLY to list the logical file names.
The originale databasename is MIXix and I take a complete backup of it using the code below (WORKS):
[code]
Sub BackupDB(ByVal Filename As String)
Dim srv As New Server(My.Settings.SQLServer)
Dim bk As New Backup
Dim bdi As New BackupDeviceItem(Filename, DeviceType.File)
bk.Action = BackupActionType.Database
bk.BackupSetDescription = "Full backup of " & My.Settings.Catalog
bk.BackupSetName = My.Settings.Catalog & " backup"
bk.Database = My.Settings.Catalog
bk.Devices.Add(bdi)
bk.Incremental = False
bk.ExpirationDate = Now.Date
bk.LogTruncation = BackupTruncateLogType.Truncate
AddHandler bk.PercentComplete, AddressOf PercentReturn
bk.SqlBackup(srv)
bk.Devices.Remove(bdi)
bk = Nothing
srv = Nothing
GC.Collect()
End Sub
[/code]
Does anyone have an idea what I can do about it?
Friendly regards
View 1 Replies
View Related
Nov 1, 2006
I recieved 4 database's that were backed up from our client. They are using SQL Server 2000 and each of the files has no extension.
When attempting to restore a database of the same name in SQL Server Express 2k5 I recieve the following error.
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided
Is there a way to restore the backup without the log backup?
Thank you
-Robert-
View 1 Replies
View Related
Oct 4, 2001
1) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?
View 1 Replies
View Related
Jan 12, 2001
I am running SQL 7 on two seperate NT4 servers, a production server and a standby server. Both servers are configured for Mixed Mode authentication. If I back up a database on the production server, do I also need to back up the master database and restore it. My reasoning behind this is that users' login details will be held in the sysxlogins tbl in the master, while their access rights will be held in the sysusers tbl in the database I am backing up and restoring. If I back up and restore a database without backing up and restoring the master db as well, will the connection between the system login and the database user be broken.
Any comments/suggestions would be appreciated.
View 1 Replies
View Related
Sep 14, 1999
Hi there...
can any one help in following situation.
Suppose in a network I have two sql server ABC and XYZ and XXX (NT server) on same sub net.
1) I take a backup from server ABC on XXX (NT).(ie.. backup on network)
2) Can I restore database in XYZ which was backed up by ABC? How???
3) Suppose My ABC machines fails and I have to again install SQL Server 7 on it, will I be able to restore database from XXX(NT)? how???
regards,
zak
View 1 Replies
View Related
Jan 23, 2001
Currently have large database in three devices, named Cabinet cab2 and cab3. Cab3 device has been expanded twice. We are upgrading the hardware and would like to get the database into one device named cabinet and clean the mess up our vendor initially created for us. Any Ideas/steps on how this could be accomplished??? TKS Jerry
View 2 Replies
View Related
Mar 31, 1999
Using SQL 7.0, has anyone backed up a database and restored on to a different database without the device files being moved around.
For example, With SQL 6.5 we used to backup PROD (source) database and restore to TRAIN (target) database. It worked just great regardless whether the databases are located on the same drive or not. We loved it and used it to refresh TRAIN from PROD on a weekly basis.(using sql Enterprise Mgr)
However, in SQL 7.0 when we attempt this procedure the database and log files of the TRAIN (target) are getting relocated to the drive location of PROD (source) database. Very strange.
Though thru object transfer i.e. import ,we can import data from PROD(source)
to TRAIN (target) database, but it is very slow and takes lot of time and performance degrades for source database (PROD)
Any input on above will be appreciated if backup / restore thru
enterprise mgr or TSQL procedure works in SQL 7.0 for restoring another database which is also on different drive i.e PROD (source) database on
drive C and TRIAN (target) database on drive E.
Thanks
Rajiv
View 1 Replies
View Related
Jul 19, 2000
While this may be in the wrong forum, I thought that I should try here first.
One of the developers that works for this company would like to restore a sample database to the SQL server after installing our software.
Is there a command line command that can be issued to restore/create a database with a file (.bak) of an SQL database (sample)? If this can't be done, can it be done with VBScript or something similar?
SQL is not my strong point, and neither is development. Any help would be appreciated.
TIA.
Joe
View 1 Replies
View Related
Mar 7, 2005
Hi,
Two of my hard drives went down yesterday. and with it went the Sql server database.The data recovery guys recovered the back up database (.bak) file.I have since reinstalled SQL Server 2000 and now when i try and restore the .bak file it says the Microsoft tape back up file set is not valid when i try and open the .bak file.
Whats the right way to add my databse to the SQl Server2000 using my .bak file and if anyone has come across the error they could help.
Thanks
L
View 7 Replies
View Related
Mar 9, 2005
hey...
when i try to restore my database... they gave an error. the database is still in use.. is there a way to kill all the connections to that database ?
View 3 Replies
View Related
Apr 24, 2008
Hi,
A while back, I used SQL Server 2000 to back up a database. Now, I am wondering if there is a way to restore this backup into a SQL Server 2005 environment as I no longer use SQL Server 2000?
Thank you
View 1 Replies
View Related
May 30, 2008
Hi all,
Our Application is made to work with different database. I have a few query
1. There is option of restoring for only table, the tables can be mention during runtime, how to acheive same in sql
2. During restoring if already same data exists, it throws an exception , based on the exception we display the message data already exist. In sql any option is available to check the data exist or not
3. Can sql create the column during runtime.
Thanks
View 4 Replies
View Related
Feb 26, 2006
theres two .mdf files
game_log.mdf
game_data.mdf
is there a way to restore a database with these files but not with .bak (backup) files? i couldn't connect to database so i reinstalled sql server 2000 and this time i could connect to the sql server fine but when i tried to restore the database, it wouldn't work when i set it to transcation log and it shows an error
The preceding restore operation did not specify WITH RECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step. RESTORE LOG is terminating abnormally.
please help, thank you
View 7 Replies
View Related
Jul 20, 2005
Hello,due to some testing my SQL Server crashed. I have to reinstall it and ...For now I only have .mdf file and nothing else. My question is: is there anypossibility to restore this .mdf file for SQL 2000? I have some useful datain this file and there will be nice to use it.Best RegardsMarciN
View 2 Replies
View Related
Oct 24, 2006
Is there a way to restore a database backup file to the default data directory in a specific SQL 2005 instance using T-SQL?
I know that you can use the command RESTORE DATABASE, but that will restore the database files back to it original location. I also know that I can use the WITH MOVE option also, but is there a keyword or some special notation that I can use to make sure that the data/log files are moved to the default data directory for a specific SQL 2005 instance?
I am trying to avoid cases where the original file location does not exists in the current file system.
Thanks in advance,
Rodney
View 1 Replies
View Related
