Error Row Redirection DF Tasks Execute Without Any Errors
Aug 14, 2007
I have a simple Error row redirection (from an OLEDB Command) to redirect all rows in error to a Transform script and thereafter to a Flat file destination. This is via the red arrow (DF path) output from the OLEDB Command.
I don't understand why this leg executes even when there are no rows in error? Zero byte Flat Files get written out when there are no errors.
How come? Why would a path with a red arrow execute even when there are no errors?
Part 2
When I introduce some errors in the data to cause an integrity violation, and I hook up an OnError event handler, it is never raised even through the error rows are successfully redirected and written out to the Flat File destination.
So what consitutes an error for a Data Flow Task? Is an error raised by Sql Server for an integrity violation bubble up as an error in the SSIS package?
I would like to know if the following is possible or if there is another way to implement this. I have a lookup transformation which i check to see if a specific record is stored. If nothing is returned i would like to insert a record into the table and then try the lookup again so that this time it will find the record and continue processing. How could i redirect the data flow to allow something like this to be done. I have tried linking the lookup failure constraint to an oledb destination and then attempted to link this back to the lookup but this has not worked.
I know how to setup the components to redirect error rows. Unfortunately, you can only redirect error rows coming through a transform. The only ones you can actually redirect going from a transform to a data destination are things like violations of a primary/foreign key. However, redirection does not work if you have a row come through a transform to a destination and the error is a constraint violation like trying to stick a null into a not null column. This simply makes the entire thing fail and shut down instead of redirecting just the row which failed.
This is the specific case. I have a really messed up inbound file. The file is pipe delimited and at least every row is the same length. I bring the file in and shove the entire file through a derived column task to explicitly calculate nulls since I can't get the convert data task to handle it and I didn't want to rewire the entire package. From there the data flows into my first conditional split where I look at the 4th column of data and split off the rows for a specific record type. These rows flow through a convert data task to do the data type conversion specific to that record type and then flow into an OLE DB destination adapter. The remaining rows flow down into a derived column transform to do some additional scrubbing for the remaining record types. From there, it flows into a conditional split to split the records out 16 ways based on the value in the 4th column, with anything not matching being dumped back to an error file for someone to look at. Each leg of the conditional split sends the row through a convert data task to convert the data to the data types specific to that given record type. I have error files setup for each of these off the convert data task which redirect any row that fails conversion. This redirects any row which doesn't convert properly. It also succeeds in redirecting any row which violates a primary or foreign key constraint. However, it does not handle those cases where the inbound file had a null when the column within the database does not allow a null. In those cases, the entire thing simply fails and then we have to grab the error and have someone page through thousands of lines of the input file to try to find the row which had a problem. What I really need to be able to do is configure the OLEDB Destination Adapter to redirect any rows which throw an error when they hit the database, unfortunately, you can't do this because a detsination adapater doesn't have any output (even though there is a place to configure errors with redirect being an option).
Does anyone have any ideas on how I can setup an error redirection to redirect ONLY those rows which are rejected, because the inbound file has a NULL where it shouldn't? Please don't tell me that I have to set something up to test every single column, because we are talking about over 2,000 columns which would need to be checked.
I have a flat file source. In the flat file, there are some bad, i.e. incomplete rows.
I set up the flat file error output to send the bad rows to a file destination on both "error" and "truncation".
However, for some reason it's really buggy, and doesn't work correctly.
For example, if my data looks like this:
cat, whiskers, 10 -- good row
dog, spot, 15 -- good row
blah -- bad row
blah blah -- bad row
horse, flicka, 20 -- good row
It correctly sends "blah" & "blah blah" to the error output, but it ALSO sends "horse, flicka, 20" to the error output as well.
This is NOT what I want.
I have this particular scenario 5 times in the data file. And each and every time, it sends the first two bad rows PLUS the following GOOD row to the error output, so basically, I lose 5 good rows in the process.
Aside from writing a script to remove the bad rows, is there an explanation for this strange behavior?
Maybe someone can assist me in solving the following error. I created a facttable with surrogate keys. In the package that processes the fact data a lookup-task is supposed to find the appropriate dimension key. If a certain dimension row is not found, this error is redirected. In this errorflow a stored procedure will add the missing row in the dimensiontable, after which another lookup takes place. Then the results of both lookups are brought together in a union all task.
When I test this errorflow I notice that the missing dimension row is indeed added to the dimensiontable. The only task that turns red is the first lookup. Please refer below for the errormessages. I understand the first one; that is why I created the redirection. But what does the rest mean? And even if I redirect the error for further processing is it still counted as a raised error? If the maximum allowed is 1 (as indicated) will the task still fail?
Any help will be greatly appreciated. Thanks in advance and regards,
Albert.
The errormessages are as follows: Error: 0xC020901E at Xforms, lookups en wegschrijven, Lookup LosplaatsKey [5071]: Row yielded no match during lookup. Error: 0xC0047072 at Xforms, lookups en wegschrijven, DTS.Pipeline: No object exists with the ID 5317. Error: 0xC0047022 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Lookup nwe losplaats" (5315) failed with error code 0xC0047072. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047072. There may be error messages posted before this with more information on why the thread has exited. Error: 0xC0047039 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. Error: 0xC0047039 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. . . . Task failed: Xforms, lookups en wegschrijven Warning: 0x80019002 at FactRittenInit: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (8) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "FactRittenInit.dtsx" finished: Failure.
I“ve having some issues with a package that I“m currently building. The package is pretty much finished and doing what it“s supposed to, just doing some testing to ensure everything is in order.
The package is pretty basic: Read a fixed with text file, do a lookup on destination database table, conditional split to determine what to insert and what to update, and that“s it!
At the source of my data flow I have the error output set to redirect all rows, counting those rows, and finally writing them to a dynamically created file.
However, I just now realized that this file seems to be created ALWAYS, regardless of rows actually being redirected or not. Everytime I run the package with no rows being passed through the error output, I still end up with a dynamically named, zero sized text file.
So my question: Is it possible to supress the creation of this file, or do I have to add a file system component to my control flow, deleting this file if my number of errorrows = 0 ?
I know we can redirect a error to say an OLE DB Destination or textfile. Is there something we can do so that I can know seeing the error table the reason for which the row failed.
The Error table will look just similar to the destination table, but for one col which should hold the reason say 'Truncate error' etc...
I have created a SSIS package programmatically using C#.
The package should do the following take data from source A, and place rows into destination B, if there are any error rows then redirect the rows to destination C. In my package I have the following components:
DTSAdapter.OLEDBSource.1 - Used as the Source
DTSAdapter.OLEDBDestination.1 - Used for the Destination Output - (let me call this normalOutput)
DTSAdapter.OLEDBDestination.1 - Used for the Destination Error Output - (let me call this errorOutput)
All my mappings appear to be correct, I build and save the package and receive a Successful validation and Success on Execution.
However, When I open the application using the Execute Package Utility I get the warning:
Warning:No rows will be sent to the error output(s). Configure error or truncation dispositions to redirect rows to the error output(s), or delete data flow transformations or destinations that are attached to the error output(s)
How do I get around this?
I have placed on the DTSAdapter.OLEDBDestination.1 (Used for the Destination Output), on the input collection I have placed:
However, the above scenario does not pass the package validation, in the Execute Package Utiltity, I get the wanring mentioned above and also the error:
Error: The input "OLE DB Destination Input" (16) has an invalid error or truncation row disposition.
So my question is what are the correct configuration settings to have in this scenario?
I am having a problem getting error rows to redirect between an OLE DB Source and an OLE DB Destination when using transactions. Each time I turn on the transaction control I get an error stating:
"[OLE DB Destination [48]] Error: The input "OLE DB Destination Input" (61) cannot be set to redirect on error using a connection in a transaction."
I get the above Error when using MSDTC. I have the data flow inside of a Sequence Container with the transaction option set to REQUIRED and the Isolation Level set to Serializable. I have tried all the Isolation levels.
I have the error rows piped off to a seperate OLE DB Destination. I have also tried using native SQL transactions with Execute SQL tasks to BEGIN, COMMIT or ROLLBACK the transaction. This does not work either. It looks like it works properly when the data flow is successful but using profiler I can see SSIS opens up a seperate process for the BEGIN and then another one with the Data Flow task. When I intentionally fail the Data Flow the Rollback always fails. I made sure I had RetainSameConnection turned on for the Connection I was using.
I am speculating that the Data Flow does not know what to Rollback the actual rows that succeeded or the error rows that are getting piped off.
I am fairly stumped on this one so any help is appreciated.
Hi, I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions. EXAMPLE: TASK#1 TABLE-A :has queries below select count(*) from employee select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2 Then I have another SQL task(may be SQL task) which use the value @counts make some decisions If @count > 1 then pass If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
Maybe I'm missing something, but I can't find how to run multiple tasks in sequence while in Visual Studio debug mode. In DTS design mode I grew accustomed to right-clicking tasks one-at-a time, but in SSIS I find the additional step of having to exit Debugging mode after every task gets old after a while.
There must be a way to start execution at a certain task and have the package continue all the way to some other specified task. It would also be nice to have every task in a Group execute in sequence and stop (even if connections continue beyond the group). I could even settle for repeatedly clicking the Continue button in Debug mode, but it's always grayed out when the current task is finished!
I have two servers, A for dev and B for production.
On server A I developed a project containing a SSIS package using SQL Server business intelligence development studio. The package runs fine from the BIDS and also when I save it to SQLServer itself and run it as a scheduled job using the SQLServer Agent.
All ready to roll out to Server B I thought, so I then saved the .dtsx file to a shared network drive.
On Server B, I created a empty project with the same name as it had on Server A. I then imported the .dtsx file into the project using project > add existing item.
The package appeared to import ok but I now cannot execute any of the data flow tasks in isolation. If I right click on them, there is no option to 'execute task' as there should be, it is not greyed out, it's not there at all.
Also, if I attempt to debug the whole package I get a message saying 'This document is opened by another project'.
Can anyone help with this as my deployment to live isn't going very well to say the least!
Both server A + B are 32-bit 2005 std edition SP1 on W2003 Server std edition SP1.
In my ETL project, l need to extract rawdata using winzip, and the DOS command l use is c:program filesWinzipwinzip32.exe -min -e c: awdata est.zip c: awdata where -min for minimize and -e for extract, c: awdata est.zip for source file and c: awdata for destination. It works fine by using DOS command.
l configure the Execute Process Tasks with the following parameters, i.e. RequiredFullFileName : TRUE Executable : c:program filesWinzipwinzip32.exe Arguments : -min -e WorkingDirectory : c:program filesWinzip StandardInputVariable : User::gsRawFile StandardOutputVariable : User::gsDestDir Where User::gsRawFile = c: awdata est.zip and User::gsDestDir = c: awdata
I have a Package and a DataFlow Task. The Package has TransactionOption=Required. The DataFlow Task has an OLE DB Source and an OLE DB Destination. The DataFlow Task has TransactionOption=Supported. The package executes on a Workstation and DataSources for the OLE DB Source and the OLE DB Destination are on a Server.
After the package had been launched an error message showed:
[OLE DB Destination [43]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DWH_Destination" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. [DTS.Pipeline] Error: component "OLE DB Destination" (43) failed the pre-execute phase and returned error code 0xC020801C.
[Connection manager "DWH_Destination"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction manager has disabled its support for remote/network transactions.". [Connection manager "DWH_Destination"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8004D024.
If I set TransactionOption=NotSupported in the DataFlow Task then the package executes successful.
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions: Any ideas about what I am failing to see? How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 9.00.1399.00
SQL Server Reporting Services Microsoft SQL Server Reporting Services Designers Version 9.00.1399.00
Microsoft Visual Studio 2005 Version 8.0.50727.42 (RTM.050727-4200) Microsoft .NET Framework Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 9.00.1399.00
SQL Server Reporting Services Microsoft SQL Server Reporting Services Designers Version 9.00.1399.00
I have some "Execute T-SQL Statement Tasks" in a package. I would like to run this same package on another SQL Server without having to change it on the other server. Since the server name can be given when setting up the connection, I think if I leave the server name out then the package could run on any server? Is my assumption correct?
The variable 1 is created as int32 and variable 2 is created as dattime.
When i execute the SQLtask, I get error:
[Execute SQL Task] Error: Executing the query "Exec mysp 'table1',OUTPUT,OUTPUT" failed with the following error: "Error converting data type nvarchar to int.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What am i missing. I tried changing the data types adding the input variable also as a variable in the mapping. Nothing seems to work. Any ideas please?
I am trying to programmatically execute a package that contains an Execute SQL Task component bound to a variable for its "SqlStatementSource" property (via an expression). The variable is of type String and contains a simple value of "SELECT 1". The Execute SQL Task contains an expression that sets the SqlStatementSource property to the value of this variable.
The package runs fine when I execute it via dtexec or BIDS, but when I attempt to run it via the object model, I receive the following error message:
The result of the expression ""@[User::Sql]"" on property "SqlStatementSource" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
I did a search on this forum and noticed quite a few threads about this same issue, but no explanation/solution. We have quite a few packages that have dynamically constructed SQL statements for Execute SQL Tasks, and they are all failing to run via the object model. Is there something that I am missing?
(the SP has two parameters; I get the same results with two question marks. The connection is an OLE DB connection.)
I have two input variables mapped to the Execute SQL task, User::company_sysno (GUID) and User:: start_period_sysno (LONG). Depending on the iteration, I also have a returnvalue variable mapped, User::ErrorCode (I have tried every data type I can think of). The stored procedure does contain a RETURN @m_intErrorCode line, but the behavior I'm getting does not change if this line is commented out.
When the ResultSet is set to "none," I get the following error:
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
When the ResultSet is set to either SingleRow or FullResultSet, I get the following, somewhat different, error:
There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
(Obviously, change the last bot of that to "FullResultSet" when FullResultSet is selected.)
I've found a handful of webpages dealing with each of those errors separately, but have not discovered one that deals with them in tandem, so I'm not even sure where to start looking. For that matter, I'm not even sure what else I need to tell you to give you an idea of what's going on. I'll post the stored procedure if necessary, but it's rather long, and my company are a tad paranoid about releasing code into the wild.
I have an Execute Process Task within my package that executes a BCP command which outputs the resultset of a query to a file in the network share. It works fine most of the time, however sometimes for unknown reasons, the following error message gets logged in my log table - In Executing "c:Program FilesMicrosoft SQL Server90ToolsBinncp.exe" "Select Comments, SoldToCustomerNbr, ProductGroupingCode, ProductGroupingName, RevSumCategoryCode, RevSumCategoryName, ValidFromDate, DTSCollectPct, DTSPrepaidPct, DTSPickUpPct, DCCollectPct, DCPrepaidPct, DCPickUpPct From ShipmentTypeCustomerBlend" queryout \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt -c -t" " -SDummyServer -T -e"d:SSIS Error LogsJob ExecutionBcpErrors.log" at "", The process exit code was "1" while the expected was "0".
The above error was captured from the System::ErrorDescription variable, by the error event handler, that was attached to the Execute Process Task. This error does not help me to debug the issue.
On running the below statement from the command prompt, i get the actual error message, which is the expected behavior -
This error message indicates that either the network path - \xxxLOG is not available for the output file creation or the file - \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt could not be created for some reason.
I 've tried to capture the error message from the StandardErrorVariable and the StandardOutputVariable properties of the ExecuteProcess Task, but in vain.
Is this a bug ? If so, is there a way to get the actual error message from the task ?
I have an execute process task that kicks off gzip to uncompress files within a for each loop. We get a LOT of bad files which causes gzip to throw an unexpected EOF error. This gets bubbled up into SSIS as a Win32 unhandled exception error which then throws up the VS JIT Debugger interface. I know what these errors are and do not want to debug. Is there anyway that I can simply ignore the exception and just throw it away?
Hello, I currently have a Transactional Log reader agent failing with the below error: The process could not execute 'sp_replcmds' Error: 14151, Severity: 18, State: 1 SQL Server Assertion: File: <logscan.cpp>, line=2223 Failed Assertion = 'm_noOfScAlloc == 0'. Stack Signature for the dump is 0x24642FE5 Error: 3624, Severity: 20, State: 1. SQL Server Assertion: File: <logscan.cpp>, line=1985 Failed Assertion = 'startLSN >= m_curLSN'. Stack Signature for the dump is 0xD7150BD4 Now, I understand that SP4 is supposed to fix a similar issue. SP4 has been installed and the errors keep happening. I do notice that the hot fix mentions different line numbers than the above errors. Does anyone know if this is a new bug? If not can someone explain the fixes to me, thanks,
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Gurus, For some reason the INPUT REDIRECTION of FTP commands from a file does not work when executed from a ISQL session.
"ftp -i -n host_name <serverstare_dirFTP-commands.dat >serverstare_dirFTP-errors.dat " would not work. It gives me an error message - "The handle could not be opened during redirection of handle 0 "
How ever it works from COMMAND prompt and BAT files. I changed it use "-s:" option instead of INPUT REDIRECTION and it works just fine every where... The command I used is "ftp -i -n -s:serverstare_dirFTP-commands.dat host_name >serverstare_dirFTP-errors.dat "
I still could not figure out why INPUT REDIRECTION would not work from ISQL only.
I have three SQL tasks executing in parallel in an Integration Services package.
+-B-+ A-+-C-+-E +-D-+
It starts with task A; then B, C, and D all execute in parallel; and finally task E runs after BCD are done.
B, C, and D are all Execute SQL tasks, all with the same connection manager. Here is their code:
B) SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process FROM temp_B
C) SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process FROM temp_C
D) SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process FROM temp_D
Each one is setting a binary value to a package variable (using Result Set settings) based on the count of records from different tables.
This works with no problems when I run it against one server (development). But when I switch to the production server, task B and D both fail. I'v checked to make sure all of the temp tables exist in the database for that connection manager and that all three have the same connection manager - all is okay.
Here's the trickier part. When I'm still pointing to the production server and I run these tasks individually, they are all successful. It is only when they are attempting to run in parallel that they fail.
Here is the Output error: Error: 0xC002F210 at Process Med?, Execute SQL Task: Executing the query "SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process FROM temp_B" failed with the following error: "Invalid object name 'temp_B'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I have VB6 application on several desktops connected to SERVER A (SQL Server 2005) in TESTING. I know I can change some registry values in VB6 application to connect it to SERVER B(SQL Server 20050 in PRODUCTION. but it is work on each and every desktop.
Is there any way to do something on SQL Server 2005 Engine end (like Alias) so I don't have to make changes for SERVER Redirection in each and every Desktop machine(client), and Just I make change on SERVER Side. any help or idea on that? Thanks,
How would you do a log in a massive rows loading, I'm having problems because every row error(because of casting, format, lookup) in a transformation task is redirected to a text file as a log, this is ok when only exist one error by row, but in the case when I have two errors in the same row detected by diferents transformation tasks only the first one is reported to the text file, I have to wait to the second information load, after I correct the first error, to find the second one, I need to validate as many errors exists by row in the same load...
which component or which strategy can I use in a SSIS Packge to achieve this?
I have this job that download 4 files once a month from the same server. The files are sizable and I need to download them in less than 5 hours total. In 2000 I use an active x script to generate the ftp script then execute the script. all four files download at the same time in 4 different tasks with no issues.
I am rewrote the process in 2005 so that it uses the IS FTP function but when all 4 ftp tasks kick off they all fail... instantly. the initially shared the same FTP connection manager so I created different ones for each and still the same result
the error is one that relates to changing directories.... Now if I just run one of the tasks it runs fine it is just when more than one try to run at once. I ended up putting in 10 second delays between each ftp task kicking off and it works just fine...
Does this sound like a bug??
Also... I am on SQL 2005 Enterprise SP1 on Windows 2003 enterprise SP1.
The import from Flat File Source fails: Error 0xc02020a1: Data Flow Task 1: Data conversion failed.
The data conversion for column "ArticleName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". (SQL Server Import and Export Wizard)
I have changed the size of the column "ArticleName" (varchar) to max but the error comes up again.
The data i want to import came with multiple flat files. They all could import properly but this one is a problem.
Hi, I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties Result Set : None
ConnectionType : OLEDB Connection : Connected to a Local Database (DB1) SQLSourceType : Direct Input SQL Statement : exec(?) IsQueryStorePro : False BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
