Error Setting Up MSDE
Mar 11, 2006I keepo getting the following error while setting up MSDE:
Setup failed to configure the server.
Refer to server error logs and setup error logs for more information.
Any ideas?
Thanks,
Dustin
ADVERTISEMENT
Setting Up MSDE
Jun 11, 2007I've received the error - Setup failed to configure the server. Refer to the server error logs and setup error logs
View 3 Replies View RelatedSetting Up MSDE - How To Change SA Password?
Feb 13, 2004I have installed WebMatrix and MSDE and have been able to successfully make a connection from WebMatrix to MSDE. I am used to using SQL Server with Enterprise Manager but I do not have that available to me right now so I'm using MSDE instead. I followed the setup instructions on the WebMatrix tutorial and setup MSDE with an SA password. I would now like to change the password to something else. Is there a command that I can use to do that? There is no Enterprise Manager so I'm kind of stumped. Thanks in advance for your help.
Kathleen
Restore Default Setting For MSDE
Nov 4, 2005How can I restore the default setting for MSDE to have only Windows
Autentication and not mixed mode? And to have my sa account without
password? Please help me! Thanks, Nibbles
SQL Mail Error While Setting Up......URGENT!!!
May 24, 2000Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
Thanks!
Setting Up Replication Gives Error 18456 - Please Help
Feb 29, 2000I am using the Configure Publishing and Distribution Wizard in the SQL Server Enterprise Manager to configure a server as a Distribution and Publishing server. The security configuration on the server in question for authentication is SQL Server and Windows NT.
When I get to the first page in the wizard I select that I want to use the server as the Distributor. The other option is to use another server for the Distribution server - and this isn't what I want to do. The next page presents the option to use the default settings to configure the distribution databases or to configure the setup. If I select the default options I get the following error message when the arrow is pointing to Configuring Distributor:
----------------------------------------------
SQL Server Enterprise Manager could not configure 'SERVER1' as the Distributor for
'SERVER1'.
Error 18456: Login failed for user 'sa'.
Remote logins for remote server 'repl_distributor' have been dropped.
Server dropped.
Server added.
Server network name set.
----------------------------------------------
Something I have tried to change in order to fix this issue is the 'Replication agents on the Distributor log into the Publisher:' option from its default (By impersontating the SQL Agent account on 'SERVER1' (trusted connection)) to 'Using SQL Server Authentication of this account:', and in those fields I have put in 'sa' (which is a valid admin account to the SQL server) and the correct password.
In all cases I get the message above. Can anyone help me to see what I am doing wrong?
Thanks for your time,
Eric Gross
Error When Setting MSDTC To Autostart
Mar 9, 2004Hi!
I'm getting an error message when I try to set autostart MSDTC in Enterprise manager. This problem just suddenly appered.
Error message:
Error 22002: RegCreateKeyEx() returned error5, 'Access is denied'
I hope somebody can tell me what this is :)
Error When Setting Up ODBC Connection
Dec 12, 2005Hi I downloaded MSDE2005 and I tried to set up an ODBC connection to adatabase I created. I can see the database using client but I got thiserror through the ODBC manager[Microsoft][SQL Native Client]An error has occurred whileestablishing a connection to the server. When connecting toSQL Server 2005, this failure may be caused by the fact thatunder the default settings SQL Server does not allowremote connections.Can anyone, please tell me what I need to do to get this setup? I triedto dabble with the TCIP and remote setting but nothing worked.Regards
View 1 Replies View RelatedGetting Error When Setting Parameters Dynamically
Feb 5, 2008Hi All,
I am creating the report and setting the datasource(dataset) dynamically to the report. I want to set the parameters also dynamically. am using Report Viewer to process the report.
When i set the parameters locally, i am getting the below error:
An error occurred during local report processing
Here is my code:
da = new SqlDataAdapter(strqry, conn);
ds = new DataSet();
da.Fill(ds);
ReportDataSource ReportDataSourceX = new ReportDataSource();
ReportDataSourceX.Value = ds.Tables[0];
ReportParameter[] parm = new ReportParameter[2];
parm[0] = new ReportParameter("Business_Function", "SQMO");
parm[1] = new ReportParameter("Application", "ETMRS");
parm[0] = new ReportParameter("Owner", "Subbu");
//parm[0] = new ReportParameter("Business_Function", ds.Tables[0].Columns["Business_Function"].ToString());
//parm[1] = new ReportParameter("Application", ds.Tables[0].Columns["Application"].ToString());
//parm[0] = new ReportParameter("Owner", ds.Tables[0].Columns["Owner"].ToString());
RptViewer.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Local;
RptViewer.LocalReport.ReportPath = "C:\ETMRS Reporting\ETMRS Reports\ETMRS Reports\PlannedTestCasesSummary.rdl";
//RptViewer.LocalReport.SetParameters(parm);
RptViewer.LocalReport.DataSources.Add(ReportDataSourceX);
RptViewer.LocalReport.SetParameters(parm);
RptViewer.LocalReport.Refresh();
Can anyone please help me in resloving this issue.
Thanks in advance,
SR.
Error Setting Up Report Subscription
Apr 25, 2007I receive the following error when I try to save a subscription after configuring it. I appreciate any insight that anyone has.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
The EXECUTE permission was denied on the object 'sp_add_category', database 'msdb', schema 'dbo'.
Error Setting Up Distribution On SQL 2005 SP2
Mar 6, 2007I am attempting to set up Distribution on SQL 2005 using the wizard.
All goes well until the actual script fires off... this line:
use master
exec sp_adddistributor @distributor = N'NAVSOLDEVSQLSERVER2005', @password = N''
GO
Causes this error:
Msg 22538, Level 16, State 1, Procedure sp_MSrepl_check_job_access, Line 155
Only replication jobs or job schedules can be added, modified, dropped or viewed through replication stored procedures.
The rest of the script fails due to this line... Now, I am fair at SQL, but I am no DBA. I did some searching and found one post that seemed to have the same problem, and the gentleman solved it himself, but did not explain how lol.
Any help greatly appreciated!
Dave Borneman
Setting Up And Testing An Error Destination
Nov 24, 2006I'm sure this is pretty basic for many folks, but how do I go about setting up and testing a Data Flow element's error output?
The intent is to set up flat file that'll contain the error output from elements on the Data Flow tab of an SSIS package. Later, I'd like to have the error output go to a SQL Server table so my DBAs have access to the errors.
There is no data transformation in this package -- it's very simple, just plain, delimited text to a 2-column SQL Server table.
Here's what I've done so far:
Set up a flat file destination to capture the error output. This flat file destination points to an empty file (C:ErrorDestination.txt) on my local machine.
Grabbed the "red" output from the Data Flow element (named "Source REGIONS"). This element is a flat file source, pointing to a file named Regions.txt. I was pleased to see that the connection manager for the error output was automatically populated with the 3 columns (Flat File Source Error Output Column, Error Code, and Error Column) when I clicked on the "New" connection button in the Flat File Destination Editor.
Changed the "Error Output" for the 2 columns in the flat file source to "Redirect Row" for both the Error and Truncation columns. I understand this instructs the source to send the error-causing rows to the error destination.
I ran the package to make sure nothing has changed how it operates under normal conditions.
But, when I introduce an obvious error into the source file (removing a quote surrounding data in one row) the package blows up on the Data Flow element in the Control Flow tab, the flat file source in the Data Flow tab turns red, but nothing flows to the error destination.
I truly expected the error on the flat file source to flow into the error destination on the data flow tab.
Any ideas? I appreciate any guidance or insight you might be able to give!
Sorry for the length of this post, but I wanted to make sure I've covered my bases.
Thanks a ton!
MSDE Connection ERROR,HELP!!
Jan 14, 2004setup MSDE command:
setup sapwd=19820822
connection test file:
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.SqlClient" %>
<script language="VB" runat="server">
Sub Page_Load()
Dim strConnection as String = "user id=sa;password=;"
strConnection += "database=northwind;server=solo822;"
strConnection += "Connect Timeout=30"
data_src.text = strConnection
Dim objConnection as New SqlConnection(strConnection)
'now we attempt to open the connection
try
objConnection.Open()
con_open.text="Connection opened successfully.<br />"
objConnection.Close()
con_close.text="Connection closed.<br />"
catch e as Exception
con_open.text="Connection failed to open.<br />"
con_close.text=e.ToString()
end try
end Sub
</script>
<html>
<body>
<h4>Testing the data connection
<asp:label id="data_src" runat="server"/></h4>
<asp:label id="con_open" runat="server"/><br />
<asp:label id="con_close" runat="server"/><br />
</body>
</html>
the displayed error:
Testing the data connection user id=sa;password=;database=northwind;server=solo822;Connect Timeout=30
Connection failed to open.
System.Data.SqlClient.SqlException: Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection. at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open() at ASP.sql_connection_aspx.Page_Load()
what's up? plz tell me. 3x!!
Error With Downloading MSDE
Nov 4, 2004Dear All,
I am new to SQL I download "sql2ksp3" to my laptop (Window Xp Pentium III) and then I start to setup MSDE:
>> setup SAPWD=pass SECURITYMODE=SQL
After I run this command it gives me the following statment!!!
Setup failed to configure the server.Refer to the server error logs and setup error logs for more information.
Please help me what i have to do to make this stuff works!!
Sincerely
Henok
MSDE SQL Connection Error
Dec 30, 2004I am trying to connect to a remote MSDE SQL database. When I set up the odbc connection I get a connection denied error. The SQL server is on a windows 2003 server. Any ideas are greatly appreciated.
Thanks, LinsLo
Error Upgrading MSDE (SP3) To SP4
Jun 13, 2006I am trying to upgrade my MSDE 2000 (SP3)to SP4, but it is giving an error of "invalid instance".
Here is what is on the machine (before running any commands):
I do not see any SQL Server installation on my machine under Start-All Programs. But, I have a directory for SQL Server under:
C:Program FilesMicrosoft SQL ServerMSSQL
The sqlserver.exe is in C:Program FilesMicrosoft SQL ServerMSSQLBinn and version = 2000.80.760.0
To upgrade MSDE 2000 (SP3) to MSDE SP4, I downloaded this file from Microsoft's website: SQL2000.MSDE-KB884525-SP4-x86-ENU.EXE
I ran the above .exe and extracted the files on my hard drive. Now, I have the C:SQL2KSP4MSDE directory and the Setup.exe is in the MSDE directory.
I looked in the services and stopped the following service:
MSSQLSERVER
Now, I ran this command:
setup SAPWD="ourpassword" SECURITYMODE=SQL
/L*v C:MSDELog.log
This came with the error - Invalid Instance
I tried running:
setup /upgradesp sqlrun /L*v C:MSDELog.log
This command ran and did not show any error. I then rebooted the machine, checked that the MSSQLSERVER service is running and checked the version of sqlserver.exe but it was still the same (2000.80.760.0). It should have been 8.00.2039
I am not sure what am I missing. All I want to do is update the MSDE Service Pack on our company machines to SP4.
Please help !
Error Setting Up SQL Server Express 2005
Nov 29, 2005Hi,I had the SQL Server Express installed on my desktop and it was working just fine. Now, I upgraded to .Net 2.0 and I had some problems with the SQL Server Express just like in post http://forums.asp.net/1070169/ShowPost.aspx.These problems were solved by using a cleanup tool but now when i try so setup the SQL Server Express 2005 i get the error:SQL Server Component Update will install the following components for SQL Server Setup:- (ok) Microsoft SQL Native Client- (error) Microsoft SQL Server 2005 Setup Support FilesErrors occurred during the installation:Error 1603 installing Microsoft SQL Server 2005 Setup Support Files.See log file for more detailed information.Fatal error during installation.The log file as lots of information such as:Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_WS10170_Support.log Last Action : InstallFinalize Error String : The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}. Error Number : 2908 -------------------------------------------------------------------------------- WS10170 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information. Can someone please help me on trying to avoid format the desktop.Thanks,Stromberg
View 2 Replies View RelatedGetting Error While Setting Up Operator Using DBArtisan Tool
Mar 3, 2015[Microsoft][SQL Server Native Client 11.0][SQL Server]INSERT failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations.(42000,1934) Procedure(trgDDLChangeLog).
View 3 Replies View RelatedRecovery :: Error When Setting Up Failover Cluster
Aug 26, 2015I'm getting the following error when I go to create a cluster in the Failover Cluster Manager in Windows Server 2008.
"The address 10.10.10.111 is not valid for its associated network"
I'm following the instruction in the book for the 70-462 exam. Â There was a step that had me create a DNS A record for the address sql-cluster.contoso.com. Â The IP address was mapped to 10.10.10.111. Â I'm not sure if this is the culprit but its the only time I used that IP address in the setup.
Below are 2 screenshots. Â The first screenshot is the error. Â The second screenshot is my DNS console.
Error 1413 During Setting Up Mirroring Session
May 28, 2007hi guys , does anyone of you have a good solution on the Error 1413: Communications to the remote server instance failed before database mirroring was fully started issue?
Best Regards,
Hans
Error On Setting Ip Partners : Servers Not Found
Sep 19, 2007Hello,
I have un problem with the mirroring, when I set the IP of the partners, I get an error saying that the server will not exists or it's impossible to join it. I try to make a mirroring without witness between two servers.
request on first :
ALTER DATABASE [panorama2] SET PARTNER = N'TCP://192.168.1.71:5050'
I get :
Msg1418, Niveau16, tat1, Ligne1L'adresse reseau du serveur "TCP://192.168.1.71:5050" est impossible à atteindre ou elle n'existe pas. Verifiez le nom de l'adresse reseau et executez la commande de nouveau.
And it's the same problem with the second server.
I work with the sql server evaluation (I put the parameter T 1400 for). Endpoints are created (I get them with a select on systcp_endpoints) :
Mirroring 65541 1 2 TCP 4 DATABASE_MIRRORING 0 STARTED 0 5050 0 NULL
Thanks for helping.
ps : Excuse my english ^^
Setting Up Web Synch - IIS Not Found On Web Server Error
Oct 10, 2007We are trying to set up Web Synchronization, but we keep getting the error "IIS ws not found on the web server. Please specify a computer name that has IIS installed".
Our Distributor/Publisher are on one box, IIS on aother box. Both boxes are in the same domain (test environment), and both boxes are being logged into with a domain account.
We can get this to work in another similar environment so we don't know why this one isn't working. Is it permission issues?
Thanks...
MSDE Capability/Error Message
Jan 6, 2004We are thinking of deploying MSDE for a modest traffic Intranet. According to this http://www.microsoft.com/sql/msde/howtobuy/msdeuse.asp 25 concurrent users should be fine.
What exception would we get if the MSDE was not handling the traffic?
What would be the best way to track/log how close we are getting to the 25 user max.
Thanks
Simon
MSDE Install Failure, No Error
Jan 7, 2004I am trying to install MSDE using settings I always have to install it:
setup sapwd=password instancename=vsdotnet disablenetworkprotocols=0 securitymode=sql
But it gets through the install, then the progress bar goes backwards and it uninstalled, I tried to enable logging and do /q+ but none of this gives usable information, i have redownloaded the MSDE SP3 install files and this has changed nothing, I know this is a common problem as I have seen a few sites mention it, but i can't seem to find the fix.
MSDE SQL Connection String Error
Jan 5, 2005Hi;
Installed MSDE on computer by running:
c:setup INSTANCENAME="VSdotNET" SAPWD="PASSWORD" SECURITYMODE=SQL
REBOOTED AND sql SERVER iCON APPEARS on the lower desktop Icon bar, open it and it says:
Server: JOHN Servises: SQL Server Running \JOHN - MSSQLServer
opened a command prompt at c: and
entered osql -S JOHN -U sa -P password
and got the 1> reply on the next line
I typed EXIT
I had downloaded two scripts that create Pubs and Northwind SQL databases. I put them in the C: folder
I Typed at c:osql -E -i instpubs.sql
It created the pubs SQL database for me
I Typed at c:osql -E -i instnwinds.sql
It created the nwinds SQL database for me
I closed the command prompt and
went to the Administrator Tools in the Control Panel
I selected Data OLEDB Selected ADD entered Pubs and used default values for Pubs to create a connection Tested it OK
Then went and ran Visual Studio Net 2003
Checked to see if the pubs and northwind SQL databases where present in the Server Explorer drop down window.
I seleced the connect to database Icon and in it's Data Link Properties
I entered JOHN for server name
pubs for selected database on the server
with Provider as MS OLEDB for SQL Service
the Icon changed to connected.
I entered this in the code for page_load
Dim MyDS As New DataSet
Dim ConnStr As String
Dim SQL As String
ConnStr = "server=(local)C:Program FilesMicrosoft SQL ServerMSSQLData;database=pubs;Trusted_Connection=yes"
SQL = "SELECT * FROM Titles " & _
"SELECT * FROM Publishers"
Dim MySqlConn As New SqlConnection(ConnStr)
Dim MySqlAdapter As New SqlDataAdapter(SQL, ConnStr)
'The SqlDataAdapter will automatically open and
'close the SqlConnection
MySqlAdapter.Fill(MyDS)
But I can not get this to work it errors out on line:
MySQLAdapter.Fill(myDS)
with: [SqlException (0x80131904): Unknown ProviderError Locating Server/Instance Specified ]
System.Data.ProviderBase.DbConnectionPool.GetConnection(Object owningObject) +317
I change ConnStr to this:
ConnStr = "server=(local)data;database=pubs; uid=sa; Pwd=password" & _
"Trusted_Connection=true"
and get this error:
[SqlException (0x80131904): Shared Memory Provider: The system cannot find the file specified.
]
System.Data.ProviderBase.DbConnectionPool.GetConnection(Object owningObject) +317
I've tried so many combination with and without user and password, I just don't get it, spent three long days stuck here, can someone help me out.
Note:
C:Program FilesMicrosoft SQL ServerMSSQLData
Is the accual location on my machine that pubs database is located.
I can use the pubs SQL database in Web Matrix OK.
Thanks
pdqjohnny@hotmail.com
Error While Upgrading From MSDE 2000 SP3 To SP4
May 15, 2008Having some trouble running the SP4 upgrade on a MSDE 2k named instance.Its working for one instance but give me error for the second instance.
- MSDE 2k sp3 currently installed
- Windows XP Pro
- Non-null SA pw
- Executing setup.exe /UpgradeSP SQLRUN
The install runs for a bit and then disappears. Here's what the very
bottom of the log reads:
=== Logging stopped: 08/05/15 11:44:29 ===
MSI (c) (64:F8) [11:44:29:698]: Note: 1: 1729
MSI (c) (64:F8) [11:44:29:698]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.
MSI (c) (64:F8) [11:44:29:713]: Grabbed execution mutex.
MSI (c) (64:F8) [11:44:29:713]: Cleaning up uninstalled install packages, if any exist
MSI (c) (64:F8) [11:44:29:713]: MainEngineThread is returning 1603
=== Verbose logging stopped: 08/05/15 11:44:29 ===
the only other error I can see is this:
Action start 11:44:29: RestoreSetupParams.2D02443E_7002_4C0B_ABC9_EAB2C06 4397B.
MSI (s) (A8:B4) [11:44:29:651]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI19E.tmp, Entrypoint: RestoreSetupParams
SOFTWAREMicrosoftMicrosoft SQL Server Setup.{FE7E950B-220A-4182-B5CA-19397244DCFD}
Entering Function MyMsiEvaluateCondition
MsiEvaluateCondition for SQLMSDEInstalled returned TRUE
End Function MyMsiEvaluateCondition
Error reading setup parameters
Action ended 11:44:29: RestoreSetupParams.2D02443E_7002_4C0B_ABC9_EAB2C06 4397B. Return value 3.
Action ended 11:44:29: INSTALL. Return value 3.
SYNTAX Used is : setup.exe /upgradesp sqlrun INSTANCENAME= SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=MyPwd BLANKSAPWD=1 /L*v D:MSDE.log
Please note that I am using BLANKSAPWD=1 because BUILTINAdministrators right is not present, the above syntax is working for one named instance but is failing in second named instance.:eek:
I'll post the full log if that helps. Any ideas?
Thanks,
Onkar
MSDE Internal Error 2737
Mar 29, 2004The only google hit on Internal Error 2737 was a message archived here with no solution posted. I found that updating IE to 6.0 SP1 solved the Internal Error 2737, although I'm still not quite getting MSDE 2000 to run under Windows 98 First Edition. The Installer now installs without error, but the server manager doesn't turn the little SQL Server system tray icon green, the server doesn't seem to start up.
View 1 Replies View RelatedSetting MSSearch.exe Affinity Gives Access Denied Error
Jan 7, 2005Hello Friends,
I'm trying to set affinity to mssearch.exe in our Windows 2000 Advanced
server (4cpus), but i am getting an "Access denied error". I checked the login which has administrator rights to the box.
It would be a great help if anyone can tell how to fix this.
Thanks
Haja
Error When Setting Map Document Label In A Group Of A Table
May 21, 2007Hi,
I try to activate the map document control on my report. My Report is composed of a table in which I group by 2 criterias. When I set the document map label of the first entry of the group list then I get an error on the preview :
"An internal error occurred on the report server. See the error log for more details. "
Can someone tell where can I find the error log file ?
thanks in Advance.
Where To Find Detailed Error Report When Setting Up Mirroring Fails
Dec 14, 2006I had a problem with mirroring that I only was able to resolve when I attempted to replicate instead. Replication gave me an error message that expained the problem; mirroring simply failed.
Is there any place where mirroring logs the details of what it is doing & why it is failing?
BTW, the problem was that the server name was changed after SQL was installed. Although i knew this, the forums indicated taht SQL 2005 automatically picks up the new name after it is restarted. This apparently is not true...
Thanks
Dave S
Error While Setting Reporting Service And Share Point Exclusion Path
Apr 14, 2008I installed SQL Server 2005 Express Edition on my Laptop for use with IIS 7.0; Everything was working fine untill I opened the Report Server Site with WVD 2008, it asked me to Modify the web.config for debugging. After doing that the Report Server Site started showing an error page saying there was a rsInternal error. I tried fixing the Web.config by hand but it dident work, so I tried completly reinstalling the SQL Server 2005 Express Edition. It reinstalled perfectly excluding the Report Server. When it came time to install the Report Server; I got the error message.
The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
--Actual Log--
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Professional Service Pack 1 (Build 6001)
Time : Mon Apr 14 04:41:42 2008
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_OWC11_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.2004
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_BackwardsCompat_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_2.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLNCLI_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SqlWriter_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005
Product Version : 9.2.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQL.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Reporting Services
Error : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005 Reporting Services
Product Version : 9.2.3042.00
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_RS.log
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
Error Number : 29528
-----------------------------------------------------------------------------
If anyone knows how to get Report Services to install after Error number 29528 occurs, Please let me know.
Thanks.
MSDE Text Datatype - Unable To Store More Than 900 Characters. (msde + Visual Studio 2003)
Jun 6, 2005Hello,
I'm not sure if it's the setup I did wrong, but I can't seem to get my
text datatype in my database to store more than 900 characters.
I'm trying to setup a news database for my website, which will populate
the information into a datagrid. To test, I manually added a news
item in the database through the visual studio 2003 gui. I
immediately noticed a problem as the I was getting an error after a
long news item saying:
"The value you entered is not consistent with the data type or length of the column, or over grid buffer limit."
I couldn't find anthing to set the buffer limit and the datatype is
"text" filled with simple text in the column. As a further test,
I
simply entered 12334567890123... up to 900 characters and still
recevied the error.
I would appreciate someone leading me in the right direction on this one.
Thanks a lot.
Error In Attaching MSDE Database To SQL Server 2005 Express
Jul 3, 2006I'm trying to attach a MSDE 2000 database to SQL Server 2005 Express.
I simply issue sp_detach_db XXX where XXX is the name of my MSDE database. Then sp_attach_db or create database ... with attach and both way gets the following message:
Event ID. : 3415
Description: Database 'XXX' cannot be upgraded because it is
read-only or has read-only files. Make the database or files writeable, and
rerun recovery.
What does it mean?
Thanks for any help,
Peter