Error Using Pivot Transform
Jan 5, 2006
Hey, did someone try to use the pivot transform?
It's not what you would call easy to configure...
In BOL there is the following section:
ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/extran9/html/55f5db6e-6777-435f-8a06-b68c129f8437.htm
I have followed the instructions there and I get an error when I try to map the new output column to the pivotkey:
"Output column "Yellow" (69) cannot be mapped to PivotKey input column"
So I mapped the new output column to the column holding the quantity values. This worked.
May this be a bug in BOL?
Further on I got some strange behaviour of the pivot transform:
My input is the following CSV-Flatfile:
sk1;sk2;pk1;qty
A;1;Yellow;2
A;1;Green;1
B;1;Yellow;5
A;2;Blue;3
A;2;Green;9
A;1;Green;5
If I omit the last line, everything is fine.
When passing the file as is into the pivot transform the output is:
SK1 SK2 Yellow Green Blue
A 1 2 1 NULL
B 1 5 NULL NULL
A 2 NULL 9 3
A 1 NULL 5 NULL
As you can see the key a;1 is duplicate. The cols SK1 and SK2 are my primary key of the destination table.
When the input is sorted by the first two colums the pivot transform throws an Error:
Error: 0xC02020CF at Pivot w sort, Pivot [39]: Duplicate pivot key value "Green".
I expected to have a sum over all Green for the key A;1. It seems that I have to use an aggregate which in my opinion should
be obsolete here.
As a conclusion I have to say that this task is far away from perfect but not bad for a start.
Regards
Fridtjof
View 3 Replies
ADVERTISEMENT
Sep 5, 2007
I need to transform the following layout by hopefully using the pivot transform, but am confused about the editor ......I have a compound primary key that I want to keep intact but then values in the row need to be broken out into their own row.
I need to go from this...
PKcol1 PKcol2 PKcol3 col4 col5 col6 col7
A 2007 1 Y N N N
A 2007 2 Y Y N N
A 2007 3 N N N Y
into this....
A 2007 1 col4 Y
A 2007 1 col5 N
A 2007 1 col6 N
A 2007 1 col7 N
A 2007 2 col4 Y
A 2007 2 col5 Y
A 2007 2 col6 N
A 2007 2 col7 N
A 2007 3 col4 N
A 2007 3 col5 N
A 2007 3 col6 N
A 2007 3 col7 Y
Can I do this using the pivot transform? Any suggestions?
View 4 Replies
View Related
Jan 16, 2003
I am trying to find the equivalent to MS Access's TRANSFORM and PIVOT in T-SQL. I've tried using GROUP BY with CUBE, and I can't seem to get the data in the correct format. Can someone help? And please explain things to me like I am an idiot, because I am.
Here is the current table and the desired results that I want.
Current Table
MonthTypeSubtypeTotalTime
1TaskASubA5
1TaskASubB10
1TaskASubC8
1TaskBSubX5
2TaskASubA4
2TaskBSubX5
Desired Result:
TypeSubTypeJanuaryFebruary
TaskASubA54
TaskASubB100
TaskASubC80
TaskBSubX55
Thanks.
Colleen
View 5 Replies
View Related
Feb 28, 2008
Hello,
In a SQL statement that uses PIVOT, is it possible to create Custom Column Headers instead of being stuck with using Column Headers based on the data?
Is it possible to join another query to a query that uses TRANSFORM and PIVOT by means of UNION? Does anything special need to happen in this case?
Thanks in Advance,
CCGP
View 5 Replies
View Related
Jan 8, 2007
I have to create a report using the below query (query is in MS Access).
Can anyone tell me how to create a Transform Pivot report in SSRS?
TRANSFORM Sum(CD1([CheckAmount]))
AS [The Value]
SELECT "Total
Amount of Checks" AS Type, tblResult.AccountNumber,
tblResult.CheckDate, tblResult.Status, Sum(CD1([CheckAmount]))
AS Total
FROM tblResult
GROUP BY "Total Amount
of Checks ", tblResult.AccountNumber, tblResult.CheckDate,
tblResult.Status
PIVOT IIf(IsNull([statusdate]),"Outstanding",Format([StatusDate],"Short
Date"));
View 1 Replies
View Related
Feb 28, 2007
I have a pivot transform that it believe is configured correctly but is not distributing the values accross the columns on the same row. for example.
input:
id seqno codevalue
1 A red
1 B red
2 C blue
2 A green
2 B violet
3 A green
desired output:
id Seq_A Seq_B Seq_C
1 red red null
2 green violet blue
3 green null null
what I am getting:
id Seq_A Seq_B Seq_C
1 red null null
1 null red null
2 green null null
2 null violet null
2 null null blue
3 green null null
I do have the pivot usage for the id column set to 1. I have the pivot usage for seqno column set to 2 and codevalue column set to 3. I have the source column for each of the output columns set to the lineageID of the apprpriate input columns. I have the pivotKey values set for each of the destination columns. A for column Seq_A, B for column Seq_B, C for column Seq_C. All four columns have sortkey positions set; 1 for id, 2 for Seq_A, 3 for Seq_B and 4 for column SEQ_C.
It seems like the id column's pivot usage is not set to 1 like it should but when I check it is 1.
I also have several other pivot transforms in the same data flow and they are working as expected.
I have a suspicion that there is some hidden meta data that is messed up that is over-ridding my settings (just my guess) I have deleted this transform and re-done it several times, checking each configuration value, but still getting the same result.
Need some help or thoughts on making this work.
Thanks
View 8 Replies
View Related
Nov 22, 2006
Is there any equivalent for Transform-pivot of MS Access in SQL Server 2005?
I have this query in MS Access that I need to migrate to SQL Server 2005
TRANSFORM Sum(CD1([CheckAmount]))
AS [The Value]
SELECT "Total
Amount of Checks" AS Type, tblResult.AccountNumber,
tblResult.CheckDate, tblResult.Status, Sum(CD1([CheckAmount]))
AS Total
FROM tblResult
GROUP BY "Total Amount
of Checks ", tblResult.AccountNumber, tblResult.CheckDate,
tblResult.Status
PIVOT IIf(IsNull([statusdate]),"Outstanding",Format([StatusDate],"Short
Date"));
View 5 Replies
View Related
Mar 26, 2007
I am facing a serious issue is BIDS.
I have configured a Un-Pivot transform, source to unpivot is sort, when I change the source to derived column (one column name is same for both) and try to open Unpivot it gives me unreferenced lineage id (this is correct). Now When I select Delete Unreferenced Lineage Column and select Apply , it works till here. As soon as I select OK, BIDS crashes and closes.
View 5 Replies
View Related
May 8, 2015
I have a Pivot Transform in SSIS (2005) working perfectly, EXCEPT for that the first column of the output (the date) repeats for each of the following columns, which are themselves falling into the correct column, but not on the same line for a particular date as the others. Snipet of result from Data Viewer is:
dbDate site1 site2
1/1/2015 0:00 0.03 NULL
1/2/2015 0:00 0.04 NULL
[code]....
View 2 Replies
View Related
May 19, 2006
Hi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Jul 5, 2006
I am using the pivot task to to a pivot of YTD-Values and after that I use derived columns to calculate month values and do a unpivot then.
All worked fine, but now I get this error message:
[ytd_pivot [123]] Error: Duplicate pivot key value "6".
The settings in the advanced editor seem to be correct (no duplicate pivot key value) and I am extracting the data from the source sorted by month.
Could it be a problem that I use all pivot columns (month 1 to 12) in the derived colum transformation and they aren´t available at this moment while data extracting is still going on?
any hints?
Cheers
Markus
View 3 Replies
View Related
Jan 25, 2008
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan
View 7 Replies
View Related
Sep 5, 2007
I can't for the life of me figure out why I am getting an error with this simple script. The error I get is "expected end" on line "22" which is the first "elseif" in the nested if statement. This makes no sense as obviously I don't want an end if statement there. Any ideas where my syntax is wrong would be greatly appreciated.
'************************************************* *********************
' Visual Basic Transformation Script
'************************************************* ***********************
' Copy each source column to the destination column
Function Main()
dim txncode
dim cashin
txncode = Trim(DTSSource("Col004"))
Cashin = Trim(DTSSource("Col005"))
if txncode = "" or IsNull(txncode) then
Main = DTSTransformStat_SkipRow
exit Function
end if
select case txncode
case "210"
if (Cashin > "0" and Cashin < "1000") then txncode = "210-1000"
'msgbox txncode
elseif ("1000" < Cashin and Cashin < "5000") then txncode = "210-1000-5000"
elseif (Cashin > "5000") then txncode = "210-5000"
else txncode = "210"
end if
msgbox txncode
Main = DTSTransformStat_OK
exit function
case else
Main = DTSTransformStat_OK
exit function
end select
DTSDestination("TransactionCode") = txncode
Main = DTSTransformStat_OK
End Function
View 5 Replies
View Related
May 14, 2008
Hi,
I get the following error when
i configure the lookup transform in the data flow task "Input column has a data type that cannot be matched".
This is the query that i use to set the reference table dataset
select firstname, lastname, address, email from customers_dimension cd , cust_test ct where cd.address<>ct.address.
I basically want to try and find all those records that have the same firstname, lastname, email in the customer dimension table where the records do not match. Both the input fields and the lookup fields have the same data type [varchar(max)].
It is pretty confusing, so much so that i did the lookup against the exact same table and got the same error.
Does anyone have a better idea as to what the problem is?
Thankyou
P.S.-This is the caching statement in the advanced tab
select * from
(SELECT firstName
FROM Customers_Dimension) as refTable
where [refTable].[firstName] = ?
View 1 Replies
View Related
Oct 4, 2004
I am trying to use a DTS package to get data from db2 in a s390 environment. I am able to use the Import task and then run a query on db2, save the package and execute the package.But when i try edit the transform task i get a mmc.ese application error...it says that the instruction at addres "" tries referencing memory at address "". The memory could not be read...
I installed a ibm odbc driver on my client...obviously the connection seem to work since the package executes...But then the edit issue...
If any one faced this problem or know what i am doing wrong....appreciate ur time and effort...
Thanks
View 1 Replies
View Related
Oct 25, 2005
I'm trying to lookup a value in another table linking on a column of datatype DT_R8. The lookup transform is complaining that I can't link on that datatype. However, the documentation says that it should work. I'm using the April CTP. Is this fixed in a later version? Any suggestions?
View 6 Replies
View Related
Mar 3, 2004
I'm getting this error in a simple DTS package.
No query specification returned by transform status.
Any ideas what's causing this ?
DTS is simply running a query (which returns data via preview)
and insert results into a table.
Thanks
Mark
View 1 Replies
View Related
Dec 20, 2007
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies
View Related
Dec 21, 2005
I have an Access 2.0 database that holds call data on a mapped drive. I am running MS SQL Server 2000. I can open it and view the records inside. I can even run the query below and get results, if I removed the CallDate and CallTime parameters.
SELECT CallDate, CallTime, Mid(CallRecordData, 68, 3) AS Extension, 'I' AS Direction, Mid(CallRecordData, 34, 11) AS Called,
Val(Mid(CallRecordData, 18, 2)) + Val(Mid(CallRecordData, 21, 2))/ 60 AS Minutes, Val(Mid(CallRecordData, 21, 2)) AS Seconds
FROM CallRecords
WHERE (CallDate = ?) AND (CallTime >= ?) AND (CallTime < ?) AND (Mid(CallRecordData, 30, 1) <> '9')
When I preview in the Transform Data Task, I get:
Package Error
Error Source: Microsoft JET Database Engine
Error Description: No value given for one or more required parameters.
When I look at the parameters, they are listed. I check their values, and they have the appropriate values (DateCalled, String, 07/14/2005) (StartTime, String, 06:30) (EndTime, String, 07:00)
When I run it in the build query or in Access with a linked table to the source, I can enter the values when asked for them and it works.
Thanks for any help you can provide.
View 2 Replies
View Related
Aug 6, 2007
i am fallowing this link
http://sqljunkies.com/Article/705F07C3-69FE-4CAF-8CF8-CADBF145F372.scuk
last 15 th i am unable to understatnd the value to set tht pivotkey value for the output columns
INPUT COLUMNS LEGEND ID
CUSTOMER 861
PRODUCT 864
ID
OUPUT COLUMNS SOUREC COLUMN PIVOT KEY VALUE
CUSTOMER 861 ???????????????????
HamQty 864 ???????????????????
MILKQTY 864 ???????????????????
BEERQTY 864 ???????????????????
BREADQTY 864 ???????????????????
CHESSQTY 864 ???????????????????
HAMQTY CANNOT MAPPED WITH PIVOTKEY VALUE ERROR I AM GETTING
PLEASE HELP ME
View 1 Replies
View Related
Apr 21, 2006
Hi :
I am getting the following error message when I am trying to do the Pivot operation.
Msg 265, Level 16, State 1, Line 1
The column name "FirstName" specified in the PIVOT operator conflicts with the existing column name in the PIVOT argument.
Msg 265, Level 16, State 1, Line 1
The column name "LastName" specified in the PIVOT operator conflicts with the existing column name in the PIVOT argument.
Msg 8156, Level 16, State 1, Line 1
The column 'FirstName' was specified multiple times for 'Pvt'.
My SQL Query is:
SELECT UserID,FirstName,LastName
FROM
(
SELECT UserID,FirstName,LastName
FROM Tempreport AS ATR
PIVOT (
MAX(QuestionAnswer)
FOR QuestionText
IN ([CompanyAddress1],[CompanyAddress2],[CompanyName],[Country],[EmailAddress],[FirstName],[LastName],[PhoneNumber],[PostalCode],[Select the Category that best describes your Industry],[Select the Category that best describes your role],[Select the Category that best describes your title],[Town])) as Pvt
) Result (UserID,FirstName,LastName)
Here is the DDL:
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'FirstName','Testing1')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'LastName','Testing2')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'CompanyName','Testing3')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'CompanyAddress1','Testing4')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'CompanyAddress2','Testing5')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'Town','Testing6')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'Country','Testing7')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'PostalCode','Testing8')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'PhoneNumber','Testing9')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'EmailAddress','Testing9')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'Select the Category that best describes your Industry','Testing1')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'Select the Category that best describes your role','Other')
INSERT INTO Tempreport (UserID,LastName,FirstName,OrderNumber,QuestionText,QuestionAnswer)
VALUES (200253,'Veerman','Mark',2,'Select the Category that best describes your title','Other')
CREATE TABLE Tempreport
(UserID INT,
LastName VARCHAR(255),
FirstName VARCHAR(255),
OrderNumber INT,
QuestionText VARCHAR(255),
QuestionAnswer VARCHAR(255)
)
Drop table tempreport.
Can anyone please let me know what I am doing wrong and how to fix this error?. looks like I cant select the same column inside the pivot and outside the pivot. In such a case what is my alternative?.
Any help is appreciated.
Thanks
M
View 12 Replies
View Related
Oct 3, 2007
Hello,
I'm wondering if anyone could shed some light on the following error when selecting multiple items in a pivot table.
€œThe database driver does not include necessary capabilities and cannot be used with Excel. Contact your database administrator or driver vendor.€?
Your help is appreciated!
View 21 Replies
View Related
Jul 8, 2015
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
View 5 Replies
View Related
Oct 13, 2015
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
  HASONEVALUE(dimSalesCompanies[SalesCompany])
  ;IF(
    VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
    ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
    ;[Sales]
  )
  ;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
View 3 Replies
View Related
Oct 23, 2014
I would like to have rows presented as columns. That's why I use the PIVOT function at the end.The resultset will be presented in Excel using an external connection to the view.
When I try to save the view I get the error
Msg 4104, Level 16, State 1, Procedure _TEST, Line 47
The multi-part identifier "vk.OppCode" could not be bound.
Code (restricting the columns that I actually have to the relevant columns only):
USE [DBTest]
GO
/****** Object: View [dbo].[_TEST] Script Date: 23-10-2014 17:24:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
View 1 Replies
View Related
Oct 14, 2015
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
View 13 Replies
View Related
Aug 17, 2015
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies
View Related
Mar 11, 2015
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
View 24 Replies
View Related
Sep 18, 2015
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.Â
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
View 3 Replies
View Related
Nov 23, 2015
I have a data table that contains budget and actual data by month. Â I use the data to create a pivot that shows actual results next to budgeted results. Â I need a column that shows that variance between those columns. Â I think my issue is that the "Type" field contains actual and Budget. Â I sum on "Type". Â I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
View 4 Replies
View Related
Oct 9, 2015
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
View 8 Replies
View Related
Apr 13, 2015
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. Â How do I resolve this.
Below are the steps I go thru to printÂ
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?Â
View 2 Replies
View Related
Jun 24, 2015
I am getting this exception "An error occurred while loading the model for the item or data source '<filename.extension'>. Verify that the connection information is correct and that you have permissions to access the data source."" when I click in Power View icon in Power Pivot Gallery SharePoint.I tried steps mention this TechNet article but the issue is still not resolved.URL...
View 2 Replies
View Related
