Error When I Try To Copy Components And Tasks
Jan 17, 2007
Hi everyone,
Everything's fine or I think so but when I try to copy/cut components to another SSIS of to own.
I get this error:
Error al copiar objetos. El Diseñador SSIS no pudo serializar los objetos de tiempo de ejecución de SSIS.
No se pudo copiar el objeto 'Tarea Secuencia de comandos ActiveX' al Portapapeles.
(Microsoft.DataTransformationServices.Design)
Tranlasted into English (more or less):
Error copying objetcts. SSIS designer was not able to serialize run-time SSIS objects
ActiveX Script task was not copied to clipboard
NOTE: this behaviour doesn't happen in the own server only from client (xp pros sp2). Nothing has been changed I don't know if install again or not.
Any help will be welcomed.
View 3 Replies
ADVERTISEMENT
Aug 15, 2007
Some more insight into the error I am getting.
It always occurs at the task (control flow) level and never at the component (data flow) level
It always occurs on the 'copy' action.
I have tried all the msxml/registry recommendations to no avail.
once again here are the error details
===================================
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects. (Microsoft Visual Studio)
===================================
Could not copy object 'SQT Drop Create RAWMigDeal RAWBarrier table' to the clipboard.
(Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
at Microsoft.DataTransformationServices.Design.ControlFlowClipboardCommandHelper.InternalMenuCopy(MenuCommand sender, CommandHandlingArgs args)
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.PersistImpl.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.DtsContainer.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
View 7 Replies
View Related
Mar 13, 2006
Hello,
I had an idea that it would be nice to be able to extend the functionality of an existing SSIS component or task by inheriting from it. Perhaps in a similar way to how it is possible to extend user controls in .Net.
e.g. The rowcount is a useful component but it would be good to create a new component that inherits from it and then override the PostExecute() method to fire an Information event containing the number of rows. That's a very simple example but I think you get the gist.
Does anyone think that would be useful? Or even made possible?
I was also wondering whether it would be possible for the SSI team to make all the icons used within SSIS available as .ico files so that we could modify them for tasks/components that might do similar things.
Thanks
-Jamie
[Microsoft follow-up]
View 1 Replies
View Related
May 28, 2008
Whenever I make a breaking change to a custom SSIS component/tasks and update the Assembly Version, it seems to break my packages beyond repair, telling me it can't load the task:
Error loading Package1.dtsx: Error loading a task. The contact information for the task is "". This happens when loading a task fails.
All of the properties of said task now show:
Could not get value for property 'c-155-designer-name'. Specified cast is not valid.
Typically, a "breaking" change when it comes to code just means that you need to update your components to adhere to the new contract of the updated signatures. But with SSIS, it seems the only solution to this is to completely remove the component, and re-add the new version, and re-enter all of the property values/expressions. If I have a package containing 10 instances of a task that only had one property removed, for example, this results in a very time-consuming process of fixing my package.
So my questions:
1) Am I doing something wrong in my versioning/deployment that is causing my packages to unnecessarily break?
2) If this is just "by design" and the way it's meant to behave, what is the best practice for making breaking changes to custom tasks/components used by many packages? Should I just never change the assembly version, even when it is a breaking change (this seems to be less disastrous)?
3) As a last resort, if I'm stuck with having to fix the broken tasks, is there a better way to fix them rather than having to completely remove them, re-add them, and re-set all of their properties/expressions?
Thanks in advance.
Jerad
View 3 Replies
View Related
Mar 6, 2007
HI All,
In several threads there has been discussion regarding adding connection managers to a package's data flow, etc. My challenge is that I have a large solution that contains many packages, and I need to change the connection manager linked to the data flow in all of the packages. When the solution was initially designed, data sources were used, and it has become a tedious maintenance issue to keep those in sync. We want to use a standard OLEDB connection manager, but adding a connection manager to each package and editing the corresponding data flow tasks in each package to use that new connection manager is a daunting task. I've coded a .Net module to access the packages, remove the old connection manager (data source) and add the new OLEDB data source. However, as I traverse the objects in the package hierarchy, when I come to the data flow object, the innerobject is not a dts object, but rather a _com object.. I can't seem to find any documentation/examples as to how to iterate the tasks within a data flow and change the connection manager. If you have any information, that would be quite helpful. If you reply with a code sample, if you would be so kind as to relate it to one of the sample packages provided with SSIS so I can run it, that would be great.
Thank you.
Steve.
View 1 Replies
View Related
Aug 7, 2006
I have installed the Workstation components on my local PC, which also contains VS 2005 and SQL Express. I installed the WS components so that I could run the full blown version of SQL Management Studio from my PC, to remove SQL 2005 servers.
I tried to update the Workstation components to SP1, but the SP1 package stops at the Setup Support Files, step and terminates claiming the package does not support SQL Express. I realize the package is not intended for Express, I simply need to update Management studio.
I tried running the Post SP1 Tools hotfix and it complains that it will not update SP0 of the tools.
I have successfully updated Express to SP1 and applied the Post hotfixes as well. Is there any way to patch just Management studio on a system with Express installed?
Thank,
Jim
View 2 Replies
View Related
Sep 7, 2006
Everything I've read says that custom data flow components are built by inheriting from the Microsoft.SqlServer.Dts.Pipeline.PipelineComponent class.
But the stock components such as the Derived Column data flow transformation must each be implemented by their own class. So how do I base my custom components on those classes? The documentation for the PipelineComponent class doesn't list any such subclasses.
View 1 Replies
View Related
Jul 11, 2007
Run the SSIS import/export wizard.
(xls -> sql table)
Select the tasks created.
Copy.
Here is the error that occurs.
p.s. Does anyone have any needles I can borrow? I think sticking them in my eyes would be nicer than working with SSIS.
===================================
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects. (Microsoft Visual Studio)
===================================
Could not copy object 'Preparation SQL Task' to the clipboard.
(Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
at Microsoft.DataTransformationServices.Design.ControlFlowClipboardCommandHelper.InternalMenuCopy(MenuCommand sender, CommandHandlingArgs args)
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.PersistImpl.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.DtsContainer.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
View 14 Replies
View Related
Jun 30, 2006
Hi,
In another thread Jamie Thomson very informatively said "The components in SSIS
are deliberately atomic (i.e. they do something very specific) so that
its easy to put them together to build something greater than the sum
of the parts". Which does make a lot of sense. However, I've been finding that I end up having to create exactly the same "pattern" of combined transform components again and again in order to solve the same problem but in different dataflows (or even within the same dataflow). Cut-and-paste-tastic! In order to obtain real re-use, it seems to me like SSIS is crying out for an easy way to create new components by using composition - i.e. the ability to take commonly-used combinations of existing components and create new "super" components (without having to write Custom Transform Components in C#/VB.Net and handle everything in code).
Does anyone know if this sort of functionality is likely to make it into SSIS in the forseeable future?
Regards,
Lawrie
View 6 Replies
View Related
Oct 10, 2007
When trying to install the components on a PC.Upgrade blocked However everything was uninstalled to start again. Any ideas where to start?
View 2 Replies
View Related
Sep 17, 2007
I have a Windows XP PC that we are trying to install SQL Tools on. When I install I get an error message that says 'cannot find one or more components'. When I finish the install, everything works except Buisiness Intelligence Development Studio, which is the product we will use the most. We do not have Visual Studio.Net or any of those product on this PC.
We have tried uninstalling and reintalling. We have tried both the Enterprise and Development CDs to get the tools installed. Both give us this error.
Any ideas?
View 3 Replies
View Related
Feb 14, 2006
Hi,
I have a 2 custom components - source and destination.
I want to create an error output for each, to allow the users of my component to handle errors the way they choose.
I only found a property in IDTSOuptut90 named isErrorOut - a boolean property indicating whether this output is an error output or not.
Does anyone have additional documentation / articles / code samples regarding how to really populate the rows in the error output?
Thanks
View 1 Replies
View Related
Mar 20, 2006
Hello. I am trying to install only the Workstation Components portion of SQL Server 2005 and I get about halfway through and the installation errors out. The error is:
EventType: sql90setup
P1: installtoolsaction
P2: 0xc0000006
P3: 0x78158a35
P4: 0xc0000006
P5: setup_sqlactionenginelistener.cpp@198
P6: setup.exe@2005.90.1399.0
P7: none
This happens after the second disk of the installation is about halfway through installing and then it throws an error stating that "The wrong volume is in the drive. Please insert volume SQLSRVRS into drive D. Cancel, Try Again, Continue" I replace the disc with the first disc and if I pick "Continue" it will display the error above. If I pick "Try again" the installation finishes, but there are components missing from Visual Studio.
---------------------------------------------------------------------------------
Here is the log file:
=== Verbose logging started: 3/16/2006 14:03:49 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (58:00) [14:03:49:483]: Resetting cached policy values
MSI (c) (58:00) [14:03:49:483]: Machine policy value 'Debug' is 0
MSI (c) (58:00) [14:03:49:483]: ******* RunEngine:
******* Product: C:Program FilesMicrosoft SQL Server90Setup BootstrapSetupSqlRun_Tools.msi
******* Action:
******* CommandLine: **********
MSI (c) (58:00) [14:03:49:483]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (58:00) [14:03:49:483]: Grabbed execution mutex.
MSI (c) (58:00) [14:03:49:483]: Cloaking enabled.
MSI (c) (58:00) [14:03:49:483]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (58:00) [14:03:49:483]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:80) [14:03:49:499]: Grabbed execution mutex.
MSI (s) (D4:BC) [14:03:49:499]: Resetting cached policy values
MSI (s) (D4:BC) [14:03:49:499]: Machine policy value 'Debug' is 0
MSI (s) (D4:BC) [14:03:49:499]: ******* RunEngine:
******* Product: C:Program FilesMicrosoft SQL Server90Setup BootstrapSetupSqlRun_Tools.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:BC) [14:03:49:499]: Note: 1: 2203 2: C:Program FilesMicrosoft SQL Server90Setup BootstrapSetupSqlRun_Tools.msi 3: -2147287037
MSI (s) (D4:BC) [14:03:49:499]: MainEngineThread is returning 3
MSI (c) (58:00) [14:03:49:499]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:00) [14:03:49:499]: MainEngineThread is returning 3
=== Verbose logging stopped: 3/16/2006 14:03:49 ===
Thank you very much,
BJ
View 7 Replies
View Related
Mar 29, 2006
I have three SQL tasks executing in parallel in an Integration Services package.
+-B-+
A-+-C-+-E
+-D-+
It starts with task A; then B, C, and D all execute in parallel; and finally task E runs after BCD are done.
B, C, and D are all Execute SQL tasks, all with the same connection manager. Here is their code:
B) SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process
FROM temp_B
C) SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process
FROM temp_C
D) SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process
FROM temp_D
Each one is setting a binary value to a package variable (using Result Set settings) based on the count of records from different tables.
This works with no problems when I run it against one server (development). But when I switch to the production server, task B and D both fail. I'v checked to make sure all of the temp tables exist in the database for that connection manager and that all three have the same connection manager - all is okay.
Here's the trickier part. When I'm still pointing to the production server and I run these tasks individually, they are all successful. It is only when they are attempting to run in parallel that they fail.
Here is the Output error:
Error: 0xC002F210 at Process Med?, Execute SQL Task: Executing the query "SELECT CASE WHEN COUNT(*) = 0 THEN 0 ELSE 1 END AS Process FROM temp_B" failed with the following error: "Invalid object name 'temp_B'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What could be causing this? I'm at a loss.
View 5 Replies
View Related
Feb 27, 2008
I have Vista Ultimate (IIS Enabled), SQL Server 2005 Developer Edition
(downloaded and ran the SP2 Update), Visual Studio 2008. VS2008
installs no problem. When I install SQL Server 2005, I get an error
when it trys to install the last part( Workstation Components,
Management Studio, etc).
I have tried FULLY, MANUALLY removing all SQL products and registry
entries. I have used Windows Installer Cleanup Utility. I have tried
Microsoft's recommended way of manually removing SQL Server 2005.
If I manually run SqlRun_Tools.msi the error comes up right away.
The error is:
"A component that you have specified in the ADD_LOCAL property is
already
installed. To upgrade the existing component, refer to the
template.ini and
set the UPGRADE property to the name of the component."
Here's the Setup Error log: http://toby.pastebin.com/f63405e24
Any help?! Thanks!
-Toby
View 11 Replies
View Related
Aug 14, 2007
I have a simple Error row redirection (from an OLEDB Command) to redirect all rows in error to a Transform script and thereafter to a Flat file destination. This is via the red arrow (DF path) output from the OLEDB Command.
I don't understand why this leg executes even when there are no rows in error? Zero byte Flat Files get written out when there are no errors.
How come? Why would a path with a red arrow execute even when there are no errors?
Part 2
When I introduce some errors in the data to cause an integrity violation, and I hook up an OnError event handler, it is never raised even through the error rows are successfully redirected and written out to the Flat File destination.
So what consitutes an error for a Data Flow Task? Is an error raised by Sql Server for an integrity violation bubble up as an error in the SSIS package?
View 2 Replies
View Related
Jan 22, 2008
Hello,
How would you do a log in a massive rows loading, I'm having problems because every row error(because of casting, format, lookup) in a transformation task is redirected to a text file as a log, this is ok when only exist one error by row, but in the case when I have two errors in the same row detected by diferents transformation tasks only the first one is reported to the text file, I have to wait to the second information load, after I correct the first error, to find the second one, I need to validate as many errors exists by row in the same load...
which component or which strategy can I use in a SSIS Packge to achieve this?
thanks
View 1 Replies
View Related
Apr 2, 2007
I have this job that download 4 files once a month from the same server. The files are sizable and I need to download them in less than 5 hours total. In 2000 I use an active x script to generate the ftp script then execute the script. all four files download at the same time in 4 different tasks with no issues.
I am rewrote the process in 2005 so that it uses the IS FTP function but when all 4 ftp tasks kick off they all fail... instantly. the initially shared the same FTP connection manager so I created different ones for each and still the same result
the error is one that relates to changing directories.... Now if I just run one of the tasks it runs fine it is just when more than one try to run at once. I ended up putting in 10 second delays between each ftp task kicking off and it works just fine...
Does this sound like a bug??
Also... I am on SQL 2005 Enterprise SP1 on Windows 2003 enterprise SP1.
View 3 Replies
View Related
Aug 25, 2015
The import from Flat File Source fails: Error 0xc02020a1: Data Flow Task 1: Data conversion failed.
The data conversion for column "ArticleName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
I have changed the size of the column "ArticleName" (varchar) to max but the error comes up again.
The data i want to import came with multiple flat files. They all could import properly but this one is a problem.
View 1 Replies
View Related
Mar 4, 2005
i tried to copy the database manually by using sqldmo
here r my codes:
On Error GoTo CopySQLDB_Err
'Create Objects
Set sql = CreateObject("SQLDMO.SQLServer")
Set db = CreateObject("SQLDMO.Database")
'Connect to the server
sql.Connect strSrv, strLogin, strPwd
'Set the database object
Set db = sql.Databases(strDatabase, "dbo")
'Determine the location of database files, primary and log
strMDFfilePath = db.PrimaryFilePath
strMDFfileName = _
Trim(db.FileGroups.Item(1).DBFiles.Item(1).Physica lName)
strLOGfile = Trim(db.TransactionLog.LogFiles(1).PhysicalName)
'Clear out the database object
Set db = Nothing
'Detach database to allow copying
sql.DetachDB (strDatabase)
'Copy database files to new names
FileCopy strMDFfileName, strMDFfilePath & strNewName & ".mdf"
FileCopy strLOGfile, strMDFfilePath & strNewName & "_log.ldf"
problem comes when i tried to attach the db using enterprise manager, error come out :
"passed to log scan in database "SIPS' is invalid" come out ...what is the problem of this?
View 3 Replies
View Related
Oct 10, 2006
Have you ever gotten an error when copying a task in the designer? I can't copy a task. That's going to be a pain for developing big packages. I have already uninstalled BIDS and installed Visual Studio and still get the error. Any thoughts on what could I could remove and reinstall to get a working environment? Would removing VS and SQL 2005 and all its components work? I ran some of the CTP cleanup tools (ttool and msiinv) and they reported no problems and no beta software
TITLE: Microsoft Visual Studio
------------------------------
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects.
------------------------------
ADDITIONAL INFORMATION:
Could not copy object 'info Script Task' to the clipboard.
(Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
BUTTONS:
OK
------------------------------
I posted here the same question in the VS Installation and Setup forum http://forums.microsoft.com/MSDN/ShowForum.aspx?ForumID=26&SiteID=1, but I think this forum may be more on target.
View 1 Replies
View Related
Sep 25, 2006
I'm trying to copy a database from my web host to local Sql Server 2005 instance using the Copy Database wizard. I get this error:An exception occurred while executing a Transact-SQL statement or batch. Server user 'celestine' is not a valid user id database 'db2'.However, 'db2' isn't the database I was trying to copy! I am trying to copy db1, but this error is complaining about db2, which is in fact somebody else's database that I don't have a login for. Why am I getting an error about db2 when I'm not trying to do anything with db2???I can however export the tables from db1 just fine using Export. But then I have to go back and generate script to re-create the stored procs, views, etc., so it is rather tedious to do it that way.
View 4 Replies
View Related
Sep 8, 2004
Hello,
The export menu in DTS is a bit confusing for me. I have some stored procedures in one SQL Server and want to copy them to another. The username is the same for both SQL Servers. When I try copying the stored procedure with defaul settings, I get a progress bar (24 percent ccompleted, 62 percent completed...), then when its done it says "failed to copy objects from sql server to sql server". When I double click the error for details it says "User or role '[username]' already exists in the current database". Then I try again, unchecking "use default options" for my export. I go in to alter the options, uncheck "copy database users and database groups" (I've also tried unchecking "copy object-level permissions"), run it, get progress bar (like above), and then get another error that says "There is no such user or group '[username]'".
My user name is correct, I am able to access both Sql Servers with this username, and I should have all of the appropriate permissions.
I think maybe there is a checkbox I'm not unchecking or something stupid like that.
Thanks in advance for any feedback.
View 2 Replies
View Related
Aug 3, 2006
I am trying to
copy a database from our company's external SQL
Server(production) to our local SQL
Server(development). The Copy Database wizard fails on the step
"Execute SQL Server Agent Job".
Following is the error in the log file.. Please advise
InnerException-->An
error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote
connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server)
View 2 Replies
View Related
Feb 25, 2008
I am trying to export a table to .CSV file using Sql 2005 BCP utility through .Net web page.
I get the following error: " An error occurred during the execution of xp_cmdshell. A call to 'CreateProcessAsUser' failed with error code: '1314'. "
I have done following steps:
-- Set up proxy for a windows account using command : sp_xp_cmdshell_proxy_account '<winAccount>', '<password>'
-- EXEC sp_grantdbaccess '<winAccount>'
-- GRANT exec ON xp_cmdshell TO <winAccount> -- BCP command is inside a stored proc, so I run the stored proc as : Create Proc dbo.Export_Table with execute as '<winAccount>'
What I am I missing? I can run the stored proc in SQL Managaement studio using that windows account.
I don't get the error when I use the Visual Studio Developement Web Server, the export file is created without any problem.
I get the error only when I run my .Net web page though IIS.
Please help.
Thanks
View 3 Replies
View Related
Feb 4, 2002
I'm running SQL 7.0 SP3 on two different machines (one with additional hotfixes). I'm taking a nightly snapshot of imported data on Server1 and pushing it out to another SQL 7.0 server on our network, Server2. All but one table is copied successfully. On the final table, I receive the message, "The process could not bulk copy into table '"%"'."
Error Information Category: Data Source, Source: Server2, Number 4813.
Full error message: "Expected the text length in data stream for bulk copy of text, ntext, or image data."
I've looked up 4813, but it's pretty ambiguous/generic. Also, when I SELECT from Server1 and INSERT INTO Server2 in the QA, I receive no errors. Does anyone have any insight?
View 1 Replies
View Related
Jun 4, 2002
Hi Friends ,
When i try to copy one table , say for e.g table x from SQL 6.5 to SQL 7.0 it gives me an error that -
'Insert Error , column 46 ( 'Coloumn_name ',DBTYPE_DBTIMESTAMP), Status 6 :
Data overflow .
Invalid character value for cast specification .'
This column on the source server ( SQL 6.5 ) has datatype 'datetime ' with value 8 and is NULL .
Although there are other columns in this table with datatype as 'datetime' as 8 and NULL , they have been copied successfully to the destination table .Only this specific column is giving an error while copying data .
I am using import export wizard to copy data between servers .
Since i have no experience with this , would like to have a solution from you to this problem. It will be great help for me .
Thank you very much ,
Alisha .
View 1 Replies
View Related
Nov 6, 2006
I'm trying to use the copy database wizard in sql server 2005, but I keep getting an error that says 'No description found.' I read a posting on another forum and someone said to remove the default associated objects for Logins so I unchecked everything except dbo owner and still got the same error. What would you recommend doing?
Thanks,
Rich
View 4 Replies
View Related
Nov 20, 2011
I am trying to copy database from one server to another using the Copy Database Wizard in SQL Server 2008 R2. The process fails in the last step. The error msg is not clear and it says there are more than two errors etc etc.
View 2 Replies
View Related
May 19, 2004
When I run the database copy wizard I'm getting an error creating shared omwwize.
The source server is 7.0. The destination server is 2000. I'm invoking the wizard from the 2000 machine.
Anybody know what this error means?
Thanks
Sharon
View 1 Replies
View Related
Jul 20, 2005
Any advice from the crowd? Every time I try to run "Copy DatabaseWizard" I get an error message saying I must be a member of thesysadmin group and have permission to copy files over the network. I'ma local admin on both boxes and a member of the sysadmin group on bothSQL servers and an admin on the network. What am I missing here?Thanks,Ralph NobleJoin Bytes!
View 1 Replies
View Related
Jun 4, 2007
Hi,
I am trying to run a very simple copy command from an execute process task:
copy O:myFoldermyFile*.txt D:myFolder
I have a working directory set also.
However, there is an error icon on the task, and if I attempt to run it I get the following error:
Error at Execute Process Task [Execute Process Task]: File/Process "" does not exist in directory "copy O:myFoldermyFile*.txt D:myFolder".
Error at Execute Process Task: There were errors during task validation.
This command works fine from the command line. What am I doing wrong here?
Thanks
View 12 Replies
View Related
Feb 15, 2007
Dear All,
I just created SSIS in my local computer. It is successfully run if trigger manually. I want the SSIS triggered by SQL_proxy_agent.
So, I try to save the copy of SSIS pakage in SQL Server but there is an error appear:
Error Code 0x80040E09: Execute Permission denied on Object ' sp_dts_getfolder', database 'mdsb', shema 'dbo'
Could anyone clear my doubt.
Thank you.
View 3 Replies
View Related
